3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSC92F7200M08U
SOC(Shenzhen SinOne Microelectronics) · Microcontrollers (MCU/MPU/SOC) · SOP-8
SC92F7200M08U from SOC(Shenzhen SinOne Microelectronics), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground pin for the device; the datasheet gives no voltage limit for this pin. |
| 2 | P1.2/INT02/T0/RX/tCK | bidirectional | GPIO P1.2 that also serves as external interrupt INT02, Timer0 counter input T0, UART RX and the ICP programming clock tCK, with a 70mA high sink-current capability. |
| 3 | P1.3/INT03/T1/TX/tDIO | bidirectional | GPIO P1.3 that also serves as external interrupt INT03, Timer1 counter input T1, UART TX and the ICP programming data line tDIO, with a 70mA high sink-current capability. |
| 4 | P2.7/PWM5/AIN7 | bidirectional | GPIO P2.7 that also serves as PWM5 output and ADC input channel AIN7, with a 70mA high sink-current capability. |
| 5 | P2.6/PWM4/AIN6 | bidirectional | GPIO P2.6 that also serves as PWM4 output and ADC input channel AIN6, with a 70mA high sink-current capability. |
| 6 | P2.1/INT25/AIN1 | bidirectional | GPIO P2.1 that also serves as external interrupt INT25 and ADC input channel AIN1, with a 70mA high sink-current capability. |
| 7 | P2.0/INT24/AIN0 | bidirectional | GPIO P2.0 that also serves as external interrupt INT24 and ADC input channel AIN0, with a 70mA high sink-current capability. |
| 8 | VDD | power_in | Supply pin; the datasheet gives an operating voltage of 2.4V to 5.5V for 12/6/2MHz system clock and 3.7V to 5.5V for 24MHz, with absolute maximum 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SOC(Shenzhen SinOne Microelectronics) |
| Package | SOP-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC supply voltage | VDD/VSS | -0.3 | 5.5 | V | 59 | ||
| Voltage on any pin | -0.3 | V | max VDD+0.3 as printed | 59 | |||
| Operating ambient temperature | TA | -40 | 85 | ℃ | 59 | ||
| Storage temperature | TSTG | -55 | 125 | ℃ | 59 | ||
| Current through VDD | IVDD | 200 | mA | 59 | |||
| Current through VSS | IVSS | 200 | mA | 59 | |||
| Operating voltage 1 | VDD | 3.7 | 5.5 | V | System clock frequency 24MHz | 59 | |
| Operating voltage 2 | VDD | 2.4 | 5.5 | V | System clock frequency 12/6/2MHz | 59 | |
| Flash ROM IAP operating voltage | VDD(Flash) | 3.7 | 5.5 | V | 59 | ||
| EEPROM IAP operating voltage | VDD(EEPROM) | 2.4 | 5.5 | V | 59 | ||
| Operating ambient temperature | TA | -40 | 85 | ℃ | 59 | ||
| Power-down standby current | Ipd1 | 3 | 6 | μA | VDD=5V, TA=+25℃, Power Down mode | 59 | |
| Base Timer operating current | IBTM | 1 | 2 | μA | VDD=5V, BTMFS[3:0]=1000, interrupt every 4.0 s | 59 | |
| WDT current | IWDT | 1 | 2 | μA | VDD=5V, WDTCKS[2:0]=000, WDT overflow time 500ms | 59 | |
| Internal reference 2.4V output voltage | VDD24 | 2.38 | 2.4 | 2.42 | V | TA=-40~85℃ | 60 |
| Internal reference 2.4V output voltage | VDD24 | 2.38 | 2.4 | 2.42 | V | VDD=3.3V; TA =-40~85℃ | 61 |
| Power Down wake-up time | TPDW | 65 | 130 | us | 61 | ||
| Reset pulse width | TReset | 18 | us | 低电平有效 | 61 | ||
| RC oscillator frequency stability | fHRC | 23.76 | 24 | 24.24 | MHz | VDD=2.4V |
61 |
| ADC supply voltage 1 | VAD1 | 2.7 | 5 | 5.5 | V | Vref=2.4V | 61 |
| ADC supply voltage 2 | VAD2 | 2.4 | 5 | 5.5 | V | Vref=VDD | 61 |
| ADC input resistance 1 | RAIN | 1 | MΩ | VIN=5V | 61 | ||
| ADC conversion current 1 | IADC1 | 2 | mA | ADC module on, VDD=5V | 61 | ||
| ADC conversion current 2 | IADC2 | 1.8 | mA | ADC module on, VDD=3.3V | 61 | ||
| Differential nonlinearity error | DNL | -4 | 4 | LSB | VDD=5V, VREF=5V | 61 | |
| Integral nonlinearity error | INL | -4 | 4 | LSB | VDD=5V, VREF=5V | 61 | |
| Offset error | EZ | -1 | 1 | LSB | VDD=5V, VREF=5V | 61 | |
| Total absolute error | EAD | -4 | 4 | LSB | VDD=5V, VREF=5V | 61 | |
| Operating current | Iop1 | 4 | mA | fSYS=24MHz | 59 | ||
| Operating current | Iop2 | 3.2 | mA | fSYS=12MHz | 59 | ||
| Operating current | Iop3 | 2.7 | mA | fSYS=6MHz | 59 | ||
| Operating current | Iop4 | 2.4 | mA | fSYS=2MHz | 59 | ||
| IDLE mode standby current | IIDL | 2.2 | mA | IDLE mode | 59 | ||
| Output low current | IOL1 | 37 | mA | VPin=0.4V | 60 | ||
| Output low current | IOL2 | 70 | mA | VPin=0.8V | 60 | ||
| Output high current P1 | IOH1 | 22 | mA | VPin=4.3V | 60 | ||
| Output high current P1 | IOH2 | 11 | mA | VPin=4.7V | 60 | ||
| Output high current P0/P2 IOH level 0 | IOH3 | 22 | mA | VPin=4.3V, Pxyz=0, IOH level 0 | 60 | ||
| Output high current P0/P2 IOH level 1 | IOH3 | 11 | mA | VPin=4.3V, Pxyz=1, IOH level 1 | 60 | ||
| Output high current P0/P2 IOH level 2 | IOH3 | 5 | mA | VPin=4.3V, Pxyz=2, IOH level 2 | 60 | ||
| Output high current P0/P2 IOH level 3 | IOH3 | 2.2 | mA | VPin=4.3V, Pxyz=3, IOH level 3 | 60 | ||
| Pull-up resistance | RPH1 | 30 | kΩ | 60 | |||
| Operating current | Iop8 | 2 | mA | VDD=3.3V, fSYS=2MHz | 61 | ||
| Output low current | IOL3 | 30 | mA | VDD=3.3V, VPin=0.4V | 61 | ||
| Pull-up resistance | RPH2 | 52 | kΩ | 61 | |||
| Power On Reset time | TPOR | 15 | ms | 61 | |||
| LVR debounce time | TLVR | 30 | us | 61 | |||
| ADC resolution | NR | 12 | bit | GND≤VAIN≤VDD | 61 | ||
| Full-scale error | EF | 4 | LSB | 61 | |||
| ADC conversion time 1 | TADC1 | 4 | us | ADC Clock = 2MHz | 61 | ||
| ADC conversion time 2 | TADC2 | 19 | us | ADC Clock = 333kHz | 61 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PBT | BTM Base timer BTMIF EBTM IPBTM 004BH 8 9 H/W Auto 能 | 27 |
CAD (KiCad official)
- Symbol:
SC92F7200M08U - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
sc92f7200m08u-etched.step/sc92f7200m08u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sc92f7200m08u.step/sc92f7200m08u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SOC(Shenzhen SinOne Microelectronics) datasheet (68 pp, sha256
5d70be927de3e550, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).