component
SC60228DC-TR
Public Made by Adomby adom
Semiment Angle, Linear Position Sensors, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSC60228DC-TR
Semiment · Angle, Linear Position Sensors · SOIC-8
SC60228DC-TR from Semiment, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | SPI chip-select input with an internal pull-up (80/140/200 µA min/typ/max). |
| 2 | N.A | unconnected | Not used on the SC60228 (N.A) and has no stated function. |
| 3 | VDD | power_in | Supply input, operating range 3.0 to 5.5 V (5.0 V typical), with a 100 nF bypass capacitor specified. |
| 4 | GND | power_in | Ground. |
| 5 | PWM | output | PWM output of the angular position, at about 976 Hz or 244 Hz depending on the variant, with 4098 µs-period position encoding. |
| 6 | MISO | tri_state | SPI data output (master-in slave-out) that goes high-impedance when CS is deasserted, with SCLK-to-data delay of 50 ns max. |
| 7 | MOSI | input | SPI data input (master-out slave-in) with an internal pull-down (6/38/60 µA), 20 ns setup before SCLK. |
| 8 | SCLK | input | SPI clock input with an internal pull-up (80/140/200 µA), minimum clock period 100 ns. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Semiment |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply current | IDD | 10 | 16 | 22 | mA | fmag = 0 rpm | 8 |
| Reference voltage | Vref | 45 | 50 | 55 | %VDD | 8 | |
| Reference offset voltage | VR offset | 470 | 500 | 530 | mV | 8 | |
| Sigma-delta ADC clock frequency | f sdc AD | 13 | 16 | 19 | MHz | 8 | |
| Resolution | RES sdc | 12 | bit | 8 | |||
| PWM frequency (976 Hz mode) | F pwm | 927 | 976 | 1024 | Hz | VDD=5V, Temp=25 | 8 |
| PWM frequency (244 Hz mode) | F pwm | 232 | 244 | 256 | Hz | VDD=5V, Temp=25 | 8 |
| MOSI pull-down current | Ipd MOSI | 6 | 38 | 60 | µA | V = 1V to VPD | 9 |
| CS, SCLK pull-up current | Ipu CS,SCLK | 80 | 140 | 200 | µA | V = 0 to VPD-1V | 9 |
| Operating ambient temperature | TA | -40 | 125 | ℃ | 7 | ||
| Storage temperature | TSTG | -65 | 165 | ℃ | 7 | ||
| Maximum junction temperature | TJ max | 165 | ℃ | 7 | |||
| ESD HBM | VESD | 4 | kV | HBM ANSI/ESDA/JEDEC 001 | 7 | ||
| ESD CDM | VESD | 750 | V | CDM ANSI/ESDA/JEDEC 002 | 7 |
CAD (KiCad official)
- Symbol:
SC60228DC-TR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
sc60228dc-tr-etched.step/sc60228dc-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sc60228dc-tr.step/sc60228dc-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Semiment datasheet (20 pp, sha256
558e75b633780e0b, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).