main
Ray
Publish 0.1.0
2da657b
SC432BVSNT1G
onsemi · Zener Diodes · SOT-23-3
SC432BVSNT1G from onsemi, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode current is rated at −100 to +150 mA continuous, with a recommended operating range of 0.04 mA to 100 mA, and cathode-to-anode voltage is limited to 36 V recommended and 37 V absolute maximum. |
| 2 | Reference | passive | Reference input current is rated at −5 to +10 mA continuous, and the output is programmable from Vref up to 36 V using two external resistors. |
| 3 | Anode | passive | Anode is the common terminal of the shunt regulator, and the cathode-to-anode voltage must not exceed 37 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23-3 |
| Category | Diodes |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Input Voltage (TA = 25°C) | Vref | 2.4875 | 2.5 | 2.5125 | V | VKA = Vref, IK = 1 mA, TA = 25°C | 4 |
| Reference Input Voltage (TA = Tlow to Thigh) | Vref | 2.4725 | 2.5 | 2.5125 | V | VKA = Vref, IK = 1 mA, TA = Tlow to Thigh | 4 |
| Ratio of Change in Reference Input Voltage to Change in Cathode-Anode Voltage | ΔVref/ΔVKA | -1.85 | -3.1 | mV/V | IK = 1 mA, VKA = 10 V to Vref | 4 | |
| Ratio of Change in Reference Input Voltage to Change in Cathode-Anode Voltage | ΔVref/ΔVKA | -0.8 | -1.8 | mV/V | IK = 1 mA, VKA = 36 V to 10 V | 4 | |
| Reference Input Current | Iref | 81 | 190 | nA | IK = 1 mA, R1 = 220 k, TA = −40°C to +125°C | 4 | |
| Reference Input Current Deviation Over Temperature Range | IrefT | 22 | 55 | nA | IK = 1 mA, R1 = 10 k | 4 | |
| Minimum Cathode Current For Regulation | Imin | 40 | 60 | µA | VKA = Vref | 4 | |
| Off-State Cathode Current | Ioff | 180 | 1000 | nA | VKA = 36 V, Vref = 0 V | 4 | |
| Dynamic Impedance | /ZKA/ | 0.22 | 0.5 | Ω | VKA = Vref, IK = 1.0 mA to 100 mA, f ≤ 1.0 kHz | 4 | |
| Voltage Reference Tolerance | -0.5 | 0.5 | % | Typ @ 25°C (NCP431B/NCP432B family, 0.5% grade) | 1 | ||
| Cathode to Anode Voltage (Recommended) | VKA | 36 | V | Minimum given as Vref | 2 | ||
| Cathode Current (Recommended) | IK | 0.04 | 100 | mA | 2 | ||
| Cathode to Anode Voltage | VKA | 37 | V | 2 | |||
| Cathode Current Range, Continuous | IK | -100 | 150 | mA | Continuous | 2 | |
| Reference Input Current Range, Continuous | Iref | -5 | 10 | mA | Continuous | 2 | |
| Operating Junction Temperature | TJ | 150 | °C | 2 | |||
| Operating Ambient Temperature Range | TA | -40 | 125 | °C | 2 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 2 | ||
| Total Power Dissipation (SN SOT-23 package) | PD | 0.52 | W | TA = 25°C, SN1 suffix plastic package | 2 | ||
| ESD Rating Human Body Model | HBM | 2000 | V | Per JEDEC JESD22-A114F; printed as >2000 | 2 | ||
| ESD Rating Charged Device Model | CDM | 1000 | V | Per JEDEC JESD22-C101E; printed as >1000 | 2 | ||
| Equivalent Full-Range Temperature Coefficient | 50 | ppm/°C | Equivalent full-range, typical | 1 | |||
| Thermal Resistance, Junction-to-Ambient (SN package) | RJA | 255 | °C/W | SN suffix package (10 mm² x 35 µm Cu) | 2 | ||
| Thermal Resistance, Junction-to-Lead (Lead 3, SN package) | RJL | 80 | °C/W | SN suffix package (10 mm² x 35 µm Cu), Lead 3 | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
SC432BVSNT1G - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sc432bvsnt1g-etched.step/sc432bvsnt1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sc432bvsnt1g.step/sc432bvsnt1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (21 pp, sha256
a914ea1acf63147a, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# SC432BVSNT1G
**onsemi** · Zener Diodes · SOT-23-3
SC432BVSNT1G from onsemi, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Cathode | passive | Cathode current is rated at −100 to +150 mA continuous, with a recommended operating range of 0.04 mA to 100 mA, and cathode-to-anode voltage is limited to 36 V recommended and 37 V absolute maximum. |
| 2 | Reference | passive | Reference input current is rated at −5 to +10 mA continuous, and the output is programmable from Vref up to 36 V using two external resistors. |
| 3 | Anode | passive | Anode is the common terminal of the shunt regulator, and the cathode-to-anode voltage must not exceed 37 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23-3 |
| Category | Diodes |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Input Voltage (TA = 25°C) | Vref | 2.4875 | 2.5 | 2.5125 | V | VKA = Vref, IK = 1 mA, TA = 25°C | 4 |
| Reference Input Voltage (TA = Tlow to Thigh) | Vref | 2.4725 | 2.5 | 2.5125 | V | VKA = Vref, IK = 1 mA, TA = Tlow to Thigh | 4 |
| Ratio of Change in Reference Input Voltage to Change in Cathode-Anode Voltage | ΔVref/ΔVKA | | -1.85 | -3.1 | mV/V | IK = 1 mA, VKA = 10 V to Vref | 4 |
| Ratio of Change in Reference Input Voltage to Change in Cathode-Anode Voltage | ΔVref/ΔVKA | | -0.8 | -1.8 | mV/V | IK = 1 mA, VKA = 36 V to 10 V | 4 |
| Reference Input Current | Iref | | 81 | 190 | nA | IK = 1 mA, R1 = 220 k, TA = −40°C to +125°C | 4 |
| Reference Input Current Deviation Over Temperature Range | IrefT | | 22 | 55 | nA | IK = 1 mA, R1 = 10 k | 4 |
| Minimum Cathode Current For Regulation | Imin | | 40 | 60 | µA | VKA = Vref | 4 |
| Off-State Cathode Current | Ioff | | 180 | 1000 | nA | VKA = 36 V, Vref = 0 V | 4 |
| Dynamic Impedance | /ZKA/ | | 0.22 | 0.5 | Ω | VKA = Vref, IK = 1.0 mA to 100 mA, f ≤ 1.0 kHz | 4 |
| Voltage Reference Tolerance | | -0.5 | | 0.5 | % | Typ @ 25°C (NCP431B/NCP432B family, 0.5% grade) | 1 |
| Cathode to Anode Voltage (Recommended) | VKA | | | 36 | V | Minimum given as Vref | 2 |
| Cathode Current (Recommended) | IK | 0.04 | | 100 | mA | | 2 |
| Cathode to Anode Voltage | VKA | | | 37 | V | | 2 |
| Cathode Current Range, Continuous | IK | -100 | | 150 | mA | Continuous | 2 |
| Reference Input Current Range, Continuous | Iref | -5 | | 10 | mA | Continuous | 2 |
| Operating Junction Temperature | TJ | | | 150 | °C | | 2 |
| Operating Ambient Temperature Range | TA | -40 | | 125 | °C | | 2 |
| Storage Temperature Range | Tstg | -65 | | 150 | °C | | 2 |
| Total Power Dissipation (SN SOT-23 package) | PD | | | 0.52 | W | TA = 25°C, SN1 suffix plastic package | 2 |
| ESD Rating Human Body Model | HBM | 2000 | | | V | Per JEDEC JESD22-A114F; printed as >2000 | 2 |
| ESD Rating Charged Device Model | CDM | 1000 | | | V | Per JEDEC JESD22-C101E; printed as >1000 | 2 |
| Equivalent Full-Range Temperature Coefficient | | | 50 | | ppm/°C | Equivalent full-range, typical | 1 |
| Thermal Resistance, Junction-to-Ambient (SN package) | RJA | | 255 | | °C/W | SN suffix package (10 mm² x 35 µm Cu) | 2 |
| Thermal Resistance, Junction-to-Lead (Lead 3, SN package) | RJL | | 80 | | °C/W | SN suffix package (10 mm² x 35 µm Cu), Lead 3 | 2 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `SC432BVSNT1G`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `sc432bvsnt1g-etched.step` / `sc432bvsnt1g-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sc432bvsnt1g.step` / `sc432bvsnt1g.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [onsemi datasheet](https://www.onsemi.com/pdf/datasheet/sc432bvsnt1-d.pdf) (21 pp, sha256 `a914ea1acf63147a`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/sc432bvsnt1g-datasheet.pdf)