← Commit history
sc09a: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+122−1
page.json+122−1@@ -33,5 +33,126 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "SC09A",+ "manufacturer": "ICMAN Tech",+ "package": "SOP-16",+ "pin_count": 16,+ "category": "Touch Sensors",+ "parts": {+ "symbol": "sc09a.kicad_sym",+ "footprint": "sc09a.kicad_mod",+ "model_3d": "sc09a-etched.glb",+ "model_3d_plain": "sc09a.glb",+ "model_3d_step": "sc09a-etched.step",+ "model_3d_step_plain": "sc09a.step",+ "lbr": "sc09a.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground / negative supply reference for the device."+ },+ {+ "number": "2",+ "name": "CMOD",+ "type": "passive",+ "description": "Charge-collection capacitor input. Connect a fixed capacitor (1nF~10nF, 4.7nF recommended) to GND; value does not affect sensitivity."+ },+ {+ "number": "3",+ "name": "CDC",+ "type": "passive",+ "description": "Sensitivity-setting capacitor input. Connect a capacitor between 15pF and 100pF to GND; smaller value → higher sensitivity."+ },+ {+ "number": "4",+ "name": "CIN0",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 0. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "5",+ "name": "CIN1",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 1. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "6",+ "name": "CIN2",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 2. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "7",+ "name": "CIN3",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 3. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "8",+ "name": "CIN4",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 4. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "9",+ "name": "CIN5",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 5. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "10",+ "name": "CIN6",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 6. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "11",+ "name": "CIN7",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 7. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "12",+ "name": "CIN8",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 8. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "13",+ "name": "INT",+ "type": "output",+ "description": "Key-active interrupt output. Open-drain NMOS: pulled low when any key is touched, high-Z when no key is touched. Requires an external pull-up (typ. 10kΩ) if used; leave floating if unused."+ },+ {+ "number": "14",+ "name": "SCL",+ "type": "input",+ "description": "I2C serial clock input (CMOS input, driven by host controller). Max bus rate 400 kbit/s with 10kΩ pull-up. Tie to GND or VDD if the I2C interface is unused."+ },+ {+ "number": "15",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C serial data input/output. Has an internal weak pull-up; an external 10kΩ pull-up is still recommended for bus operation. Tie to GND/VDD or leave floating if unused."+ },+ {+ "number": "16",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive power supply input, 2.5V to 6.0V (abs max 6.0V, electrical spec table lists max 6.5V). Typical Idd = 1.74mA @5V, 0.84mA @3V in normal mode; decouple with 100nF to GND."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}