← Commit history
package.json+193−4@@ -1,6 +1,6 @@ { "slug": "sc09a",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "ICMAN Tech Touch Sensors, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,195 @@ "docs/hero.png", "docs/sc09a-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "sc09a-etched.step",+ "sc09a-etched.glb"+ ],+ "component": {+ "mpn": "SC09A",+ "manufacturer": "ICMAN Tech",+ "package": "SOP-16",+ "pin_count": 16,+ "category": "Touch Sensors",+ "parts": {+ "symbol": "sc09a.kicad_sym",+ "footprint": "sc09a.kicad_mod",+ "model_3d": "sc09a-etched.glb",+ "model_3d_plain": "sc09a.glb",+ "model_3d_step": "sc09a-etched.step",+ "model_3d_step_plain": "sc09a.step",+ "lbr": "sc09a.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground / negative supply reference for the device."+ },+ {+ "number": "2",+ "name": "CMOD",+ "type": "passive",+ "description": "Charge-collection capacitor input. Connect a fixed capacitor (1nF~10nF, 4.7nF recommended) to GND; value does not affect sensitivity."+ },+ {+ "number": "3",+ "name": "CDC",+ "type": "passive",+ "description": "Sensitivity-setting capacitor input. Connect a capacitor between 15pF and 100pF to GND; smaller value → higher sensitivity."+ },+ {+ "number": "4",+ "name": "CIN0",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 0. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "5",+ "name": "CIN1",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 1. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "6",+ "name": "CIN2",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 2. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "7",+ "name": "CIN3",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 3. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "8",+ "name": "CIN4",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 4. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "9",+ "name": "CIN5",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 5. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "10",+ "name": "CIN6",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 6. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "11",+ "name": "CIN7",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 7. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "12",+ "name": "CIN8",+ "type": "bidirectional",+ "description": "Capacitive touch sense input for touch pad 8. Connect to sense pad; leave floating if unused."+ },+ {+ "number": "13",+ "name": "INT",+ "type": "output",+ "description": "Key-active interrupt output. Open-drain NMOS: pulled low when any key is touched, high-Z when no key is touched. Requires an external pull-up (typ. 10kΩ) if used; leave floating if unused."+ },+ {+ "number": "14",+ "name": "SCL",+ "type": "input",+ "description": "I2C serial clock input (CMOS input, driven by host controller). Max bus rate 400 kbit/s with 10kΩ pull-up. Tie to GND or VDD if the I2C interface is unused."+ },+ {+ "number": "15",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C serial data input/output. Has an internal weak pull-up; an external 10kΩ pull-up is still recommended for bus operation. Tie to GND/VDD or leave floating if unused."+ },+ {+ "number": "16",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive power supply input, 2.5V to 6.0V (abs max 6.0V, electrical spec table lists max 6.5V). Typical Idd = 1.74mA @5V, 0.84mA @3V in normal mode; decouple with 100nF to GND."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "lcsc": "C99083",+ "digikey": false,+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:16:03Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "sc09a.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "sc09a-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 9.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "7d6451f57808b3e11e82c33d22853355b09f9b656ebdedd23076ab9381f7b314",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "sc09a",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "ICMAN Tech Touch Sensors, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/sc09a-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "sc09a-etched.step"+ "sc09a-etched.step",+ "sc09a-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -218,5 +217,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}