component
SC04B
Public Made by Adomby adom
icman(晶尊微) Touch Sensors, SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 4d ago |
| viewers | 4d ago |
| package.json | 4d ago |
| page.json | 4d ago |
| README.md | 4d ago |
| sc04b-etched.glb | 4d ago |
| sc04b-etched.step | 4d ago |
| sc04b-hero.glb | 4d ago |
| sc04b-hero.overlay.json | 4d ago |
| sc04b.glb | 4d ago |
| sc04b.kicad_mod | 4d ago |
| sc04b.kicad_sym | 4d ago |
| sc04b.lbr | 4d ago |
| sc04b.step | 4d ago |
SC04B
icman(晶尊微) · Touch Sensors · SOP-16
SC04B from icman(晶尊微), in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Power supply ground pin for the device (电源地), with the VDD and GND pins forming the power inputs. |
| 2 | CMOD | bidirectional | Charge-collection capacitor connection that takes a fixed-value capacitor, typically 4.7 nF within a 1 nF to 10 nF range, independent of sensitivity. |
| 3 | CDC | bidirectional | Sensitivity capacitor connection with a 5 pF to 100 pF range, where a smaller capacitance gives higher sensitivity. |
| 4 | CIN0 | bidirectional | Sense-pad input for touch key 0 that detects the capacitance change, left floating when unused. |
| 5 | CIN1 | bidirectional | Sense-pad input for touch key 1 that detects the capacitance change, left floating when unused. |
| 6 | CIN2 | bidirectional | Sense-pad input for touch key 2 that detects the capacitance change, left floating when unused. |
| 7 | CIN3 | bidirectional | Sense-pad input for touch key 3 that detects the capacitance change, left floating when unused. |
| 8 | NC | unconnected | Listed as NC in the pin table with no function or connection specified in the datasheet. |
| 9 | NC | unconnected | Listed as NC in the pin table with no function or connection specified in the datasheet. |
| 10 | OUT3 | output | Open-drain NMOS output for touch key 3 with an internal 10 kΩ pull-up, where the valid active level is strong low and the pin is left floating when unused. |
| 11 | OUT2 | output | Open-drain NMOS output for touch key 2 with an internal 10 kΩ pull-up, where the valid active level is strong low and the pin is left floating when unused. |
| 12 | OUT1 | output | Open-drain NMOS output for touch key 1 with an internal 10 kΩ pull-up, where the valid active level is strong low and the pin is left floating when unused. |
| 13 | OUT0 | output | Open-drain NMOS output for touch key 0 with an internal 10 kΩ pull-up, where the valid active level is strong low and the pin is left floating when unused. |
| 14 | SLPEN | input | Sleep-mode enable input, where tying it to GND disables sleep and tying it to VDD allows the chip to enter sleep mode after no touch for more than 70 s. |
| 15 | MD | input | Output mode select input, where tying it to GND gives direct output (low while touched) and tying it to VDD gives latched output that toggles on each touch. |
| 16 | VDD | power_in | Positive supply input with an operating range of 2.6 V to 6.0 V and a maximum rating of 6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | icman(晶尊微) |
| Package | SOP-16 |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作电压 | Vdd | 2.6 | 6 | V | 7 | ||
| 电流损耗 (正常模式) | Idd | 0.73 | mA | VDD=5.0V 正常模式 | 7 | ||
| 电流损耗 (正常模式) | Idd | 0.51 | mA | VDD=3.3V 正常模式 | 7 | ||
| 电流损耗 (睡眠模式) | Idd | 13 | UA | VDD=5.0V 睡眠模式 | 7 | ||
| 电流损耗 (睡眠模式) | Idd | 10 | UA | VDD=3.3V 睡眠模式 | 7 | ||
| 上电初始化时间 | Tini | 200 | ms | 7 | |||
| OUT0~OUT3输出电阻 | Zo | 50 | Ohm | delta Cin > 0.2pF | 7 | ||
| OUT0~OUT3输出电阻 | Zo | 10 | K | delta Cin < 0.2pF | 7 | ||
| OUT0~OUT3输出灌电流 | Isk | 10 | mA | VDD=5V | 7 | ||
| 最小检测电容 | delta_Cin | 0.2 | pF | CDC=15pf | 7 | ||
| 工作温度 | -40 | 85 | ºC | 6 | |||
| 存储温度 | -50 | 150 | ºC | 6 | |||
| 最大Vdd电压 | -0.3 | 6 | V | 6 | |||
| 管脚最大直流输出电流 | -10 | 10 | mA | 6 | |||
| 管脚容限电压 | -0.3 | V | upper limit printed as (Vdd + 0.3) V | 6 |
CAD (KiCad official)
- Symbol:
SC04B - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
sc04b-etched.step/sc04b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sc04b.step/sc04b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: icman(晶尊微) datasheet (13 pp, sha256
bb09cdce17a3aba6, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).