main
Ray
Publish 0.1.0
2fc6591
SB8223
SHOUDING · Touch Sensors · SOT-23-6
SB8223 from SHOUDING, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | CMOS output that, after a touch response, goes high (OLH=0) or low (OLH=1), with OUT and ODO following the touch response in sync or hold mode. |
| 2 | GND | power_in | Negative power supply; all voltages are referenced to GND, and a filter capacitor of 10uF or more is recommended between VDD and GND. |
| 3 | TCH | input | Touch pad input; the touch pad wiring to this pin must be short and kept away from fast-switching signals, and the external tuning capacitor Cj ranges from 0pF to 75pF. |
| 4 | OLH | input | Output polarity select, where high or low is the active output level; it is pulled low internally when floating (default high-active mode). |
| 5 | VDD | power_in | Positive power supply with an operating voltage range of 2.0V to 5.5V and an absolute maximum of -0.3V to 5.5V. |
| 6 | HLD | input | Hold/sync mode select; HLD=0 selects sync mode (output follows touch), HLD=1 selects hold mode (output latches until the next touch), and it is pulled low internally when floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SHOUDING |
| Package | SOT-23-6 |
| Category | Sensors |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | 5.5 | V | referenced to GND | 4 | |
| Input/output voltage | VI / VO | -0.5 | V | max VDD +0.5 V; referenced to GND | 4 | ||
| Operating temperature | TOPR | -20 | 70 | ℃ | 4 | ||
| Storage temperature | TSTG | -40 | 125 | ℃ | 4 | ||
| Operating voltage | VDD | 2 | 3 | 5.5 | V | TOPR=-20 ~ 70℃ | 4 |
| Operating current | IDD | 1.5 | 3.5 | uA | FST=0, SLS=1 | 4 | |
| Operating current | IDD | 2.5 | 5 | uA | FST=0, SLS=0 | 4 | |
| Operating current | IDD | 6 | 8.5 | uA | FST=1, SLS=1 | 4 | |
| Operating current | IDD | 10 | 15 | uA | FST=1, SLS=0 | 4 | |
| Input PIN pull-up resistance | RUP | 50 | 100 | 200 | kΩ | 4 | |
| High-level output current (OUT) | IOL | 24 | mA | VOL=0.7V | 4 |
CAD (KiCad official)
- Symbol:
SB8223 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
sb8223-etched.step/sb8223-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sb8223.step/sb8223.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SHOUDING datasheet (6 pp, sha256
55022b4cd1ab75e8, retrieved 2026-10-29, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SB8223
**SHOUDING** · Touch Sensors · SOT-23-6
SB8223 from SHOUDING, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | CMOS output that, after a touch response, goes high (OLH=0) or low (OLH=1), with OUT and ODO following the touch response in sync or hold mode. |
| 2 | GND | power_in | Negative power supply; all voltages are referenced to GND, and a filter capacitor of 10uF or more is recommended between VDD and GND. |
| 3 | TCH | input | Touch pad input; the touch pad wiring to this pin must be short and kept away from fast-switching signals, and the external tuning capacitor Cj ranges from 0pF to 75pF. |
| 4 | OLH | input | Output polarity select, where high or low is the active output level; it is pulled low internally when floating (default high-active mode). |
| 5 | VDD | power_in | Positive power supply with an operating voltage range of 2.0V to 5.5V and an absolute maximum of -0.3V to 5.5V. |
| 6 | HLD | input | Hold/sync mode select; HLD=0 selects sync mode (output follows touch), HLD=1 selects hold mode (output latches until the next touch), and it is pulled low internally when floating. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SHOUDING |
| Package | SOT-23-6 |
| Category | Sensors |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | -0.3 | | 5.5 | V | referenced to GND | 4 |
| Input/output voltage | VI / VO | -0.5 | | | V | max VDD +0.5 V; referenced to GND | 4 |
| Operating temperature | TOPR | -20 | | 70 | ℃ | | 4 |
| Storage temperature | TSTG | -40 | | 125 | ℃ | | 4 |
| Operating voltage | VDD | 2 | 3 | 5.5 | V | TOPR=-20 ~ 70℃ | 4 |
| Operating current | IDD | | 1.5 | 3.5 | uA | FST=0, SLS=1 | 4 |
| Operating current | IDD | | 2.5 | 5 | uA | FST=0, SLS=0 | 4 |
| Operating current | IDD | | 6 | 8.5 | uA | FST=1, SLS=1 | 4 |
| Operating current | IDD | | 10 | 15 | uA | FST=1, SLS=0 | 4 |
| Input PIN pull-up resistance | RUP | 50 | 100 | 200 | kΩ | | 4 |
| High-level output current (OUT) | IOL | 24 | | | mA | VOL=0.7V | 4 |
## CAD (KiCad official)
- Symbol: `SB8223`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `sb8223-etched.step` / `sb8223-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sb8223.step` / `sb8223.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [SHOUDING datasheet](docs/sb8223-datasheet.pdf) (6 pp, sha256 `55022b4cd1ab75e8`, retrieved 2026-10-29, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sb8223-datasheet.pdf)