component
SA8349-MS
Public Made by Adomby adom
MSKSEMI Brushed DC Motor Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
SA8349-MS
MSKSEMI · Brushed DC Motor Drivers · SOP-8
SA8349-MS from MSKSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BI | input | Backward (reverse) logic input controlling the motor direction; logic high ≥2.2 V, low ≤0.7 V, recommended input range -0.3 to 6.5 V. |
| 2 | FI | input | Forward logic input controlling the motor direction; logic high ≥2.2 V, low ≤0.7 V, recommended input range -0.3 to 6.5 V. |
| 3 | GND | power_in | Ground; all voltage values are referenced to this terminal. |
| 4 | VCC | power_in | Power supply for the motor driver, recommended operating range 3 V to 30 V (absolute maximum 33 V). |
| 5 | FO | output | Forward H-bridge output (pins 5 and 6 are tied together) driving the motor, high in forward mode and low in reverse and brake modes. |
| 6 | FO | output | Forward H-bridge output (pins 5 and 6 are tied together) driving the motor, high in forward mode and low in reverse and brake modes. |
| 7 | BO | output | Backward H-bridge output (pins 7 and 8 are tied together) driving the motor, high in reverse mode and low in forward and brake modes. |
| 8 | BO | output | Backward H-bridge output (pins 7 and 8 are tied together) driving the motor, high in reverse mode and low in forward and brake modes. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | Vopr | 3 | 33 | V | 4 | ||
| Standby current | ICCST | 1 | uA | VCC=12V,FI=BI=0V,no load | 4 | ||
| Undervoltage lockout | UVLO | 1.9 | 2.2 | 2.8 | V | VCC rising | 4 |
| Input high level | VINH | 2.2 | V | 4 | |||
| Input low level | VINL | 0.7 | V | 4 | |||
| Input high current | IINH | 110 | 200 | uA | VCC = 12V,VIN = 5V | 4 | |
| Input low current | IINL | 1 | uA | VCC = 12V,VIN= 0V | 4 | ||
| Supply voltage | VCC | 33 | V | 3 | |||
| Output continuous current | Iout | 8 | A | 3 | |||
| Operating temperature | Top | -25 | 85 | °C | 3 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 3 | ||
| Operating voltage range | VCC | 3 | 30 | V | TA=25℃ | 4 | |
| Input signal voltage INH and INL | VINH | -0.3 | 6.5 | V | TA=25℃ | 4 | |
| Output continuous current | VOUT_X | 0 | 6 | A | TA=25℃ | 4 | |
| Logic input frequency | FIN_X | 30 | KHz | TA=25℃ | 4 | ||
| Quiescent current | ICC | 1 | mA | VCC=12V,FI=BI=5V or FI=5V & BI=0V or FI=0V & BI=5V, no load | 4 | ||
| PWM current | ICCPWM1 | 2.5 | mA | VCC=12V, FI=5V, BI=50KHz, no load | 4 | ||
| On resistance HS+LS | Rds(on) | 80 | mΩ | ILOAD=1A, HS+LS | 4 | ||
| On resistance HS+LS | Rds(on) | 110 | mΩ | ILOAD=3A, HS+LS | 4 | ||
| Overtemperature protection temperature | TOTP | 160 | ℃ | 4 | |||
| Recovery temperature | TSDR | 130 | ℃ | 4 | |||
| Overcurrent protection current | IOCP | 10 | A | 4 |
CAD (KiCad official)
- Symbol:
SA8349-MS - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
sa8349-ms-etched.step/sa8349-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sa8349-ms.step/sa8349-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (10 pp, sha256
e72165de54b90ab8, retrieved 2026-10-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# SA8349-MS
**MSKSEMI** · Brushed DC Motor Drivers · SOP-8
SA8349-MS from MSKSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BI | input | Backward (reverse) logic input controlling the motor direction; logic high ≥2.2 V, low ≤0.7 V, recommended input range -0.3 to 6.5 V. |
| 2 | FI | input | Forward logic input controlling the motor direction; logic high ≥2.2 V, low ≤0.7 V, recommended input range -0.3 to 6.5 V. |
| 3 | GND | power_in | Ground; all voltage values are referenced to this terminal. |
| 4 | VCC | power_in | Power supply for the motor driver, recommended operating range 3 V to 30 V (absolute maximum 33 V). |
| 5 | FO | output | Forward H-bridge output (pins 5 and 6 are tied together) driving the motor, high in forward mode and low in reverse and brake modes. |
| 6 | FO | output | Forward H-bridge output (pins 5 and 6 are tied together) driving the motor, high in forward mode and low in reverse and brake modes. |
| 7 | BO | output | Backward H-bridge output (pins 7 and 8 are tied together) driving the motor, high in reverse mode and low in forward and brake modes. |
| 8 | BO | output | Backward H-bridge output (pins 7 and 8 are tied together) driving the motor, high in reverse mode and low in forward and brake modes. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage | Vopr | 3 | | 33 | V | | 4 |
| Standby current | ICCST | | | 1 | uA | VCC=12V,FI=BI=0V,no load | 4 |
| Undervoltage lockout | UVLO | 1.9 | 2.2 | 2.8 | V | VCC rising | 4 |
| Input high level | VINH | 2.2 | | | V | | 4 |
| Input low level | VINL | | | 0.7 | V | | 4 |
| Input high current | IINH | | 110 | 200 | uA | VCC = 12V,VIN = 5V | 4 |
| Input low current | IINL | | | 1 | uA | VCC = 12V,VIN= 0V | 4 |
| Supply voltage | VCC | | | 33 | V | | 3 |
| Output continuous current | Iout | | | 8 | A | | 3 |
| Operating temperature | Top | -25 | | 85 | °C | | 3 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 3 |
| Operating voltage range | VCC | 3 | | 30 | V | TA=25℃ | 4 |
| Input signal voltage INH and INL | VINH | -0.3 | | 6.5 | V | TA=25℃ | 4 |
| Output continuous current | VOUT_X | 0 | | 6 | A | TA=25℃ | 4 |
| Logic input frequency | FIN_X | | | 30 | KHz | TA=25℃ | 4 |
| Quiescent current | ICC | | 1 | | mA | VCC=12V,FI=BI=5V or FI=5V & BI=0V or FI=0V & BI=5V, no load | 4 |
| PWM current | ICCPWM1 | | 2.5 | | mA | VCC=12V, FI=5V, BI=50KHz, no load | 4 |
| On resistance HS+LS | Rds(on) | | 80 | | mΩ | ILOAD=1A, HS+LS | 4 |
| On resistance HS+LS | Rds(on) | | 110 | | mΩ | ILOAD=3A, HS+LS | 4 |
| Overtemperature protection temperature | TOTP | | 160 | | ℃ | | 4 |
| Recovery temperature | TSDR | | 130 | | ℃ | | 4 |
| Overcurrent protection current | IOCP | | 10 | | A | | 4 |
## CAD (KiCad official)
- Symbol: `SA8349-MS`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `sa8349-ms-etched.step` / `sa8349-ms-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `sa8349-ms.step` / `sa8349-ms.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MSKSEMI datasheet](docs/sa8349-ms-datasheet.pdf) (10 pp, sha256 `e72165de54b90ab8`, retrieved 2026-10-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/sa8349-ms-datasheet.pdf)