main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs sa571ts16ardq: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers sa571ts16ardq: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md sa571ts16ardq: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray
sa571ts16ardq-etched.fit.json sa571ts16ardq: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sa571ts16ardq-etched.glb sa571ts16ardq: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sa571ts16ardq-etched.step sa571ts16ardq: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
sa571ts16ardq-hero.glb sa571ts16ardq: hero from the plain model · Ray
sa571ts16ardq-hero.overlay.json sa571ts16ardq: hero from the plain model · Ray
sa571ts16ardq.glb Publish 0.1.0 · Ray
sa571ts16ardq.kicad_mod Publish 0.1.0 · Ray
sa571ts16ardq.kicad_sym Publish 0.1.0 · Ray
sa571ts16ardq.lbr Publish 0.1.0 · Ray
sa571ts16ardq.step Publish 0.1.0 · Ray

SA571TS16ARDQ

GR · Special Purpose Amplifiers · TSSOP-16

SA571TS16ARDQ from GR, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CAP1.rect passive Channel 1 rectifier filter-capacitor terminal (CRECT1). External capacitor to ground sets the rectifier averaging time constant (τ = 10 kΩ × CRECT). Node is biased at VREF (1.8 V).
2 IN1.rect input Channel 1 rectifier input. Signal current from VIN flows through external 2.2 µF coupling cap and internal 10 kΩ (R1) into the full-wave rectifier summing node biased at VREF.
3 IN1.ΔG input Channel 1 variable-gain (ΔG) cell input. Signal current flows through external coupling cap and internal 20 kΩ (R2) into the ΔG summing node biased at VREF.
4 GND power_in Device ground return. Common ground for both channels and internal bandgap reference.
5 IN1.inv input Channel 1 op-amp inverting input, also tied internally to the ΔG cell output and to internal R3 (20 kΩ) / R4 (30 kΩ). Non-inverting input is internally tied to VREF (1.8 V).
6 R31.res passive Channel 1 summing-node/feedback tap, brought out from the internal R3 (20 kΩ) that goes from the summing node to the op-amp output. Allows compressor/expandor gain to be set by internal or external resistors.
7 OUT1 output Channel 1 op-amp output. ±20 mA output current capability; capable of +13 dBm (3.5 VRMS) into 300 Ω.
8 THD1.trim passive Channel 1 THD (total-harmonic-distortion) trim terminal for the ΔG cell. Allows nulling of internal offset voltage to minimize even-harmonic distortion; node sits at VREF potential.
9 THD2.trim passive Channel 2 THD trim terminal for the ΔG cell. Allows nulling of internal offset voltage; node sits at VREF potential.
10 OUT2 output Channel 2 op-amp output. ±20 mA output current capability; +13 dBm into 300 Ω.
11 R32.res passive Channel 2 summing-node/feedback tap through the internal R3 (20 kΩ) from summing node to op-amp output; enables external gain adjustment.
12 IN2.inv input Channel 2 op-amp inverting input, tied internally to the ΔG cell output and internal R3/R4 network; non-inverting input is internally tied to VREF.
13 VCC power_in Positive supply rail. Operating range 6 V to 18 V; typical ICC = 4.2 mA (4.8 mA max) with no signal.
14 IN2.ΔG input Channel 2 variable-gain (ΔG) cell input through internal 20 kΩ (R2) into the ΔG summing node biased at VREF.
15 IN2.rect input Channel 2 rectifier input through internal 10 kΩ (R1) into the full-wave rectifier summing node biased at VREF.
16 CAP2.rect passive Channel 2 rectifier filter-capacitor terminal (CRECT2). External cap to ground sets rectifier averaging time constant (τ = 10 kΩ × CRECT). Node biased at VREF.

Key specifications

Parameter Value
Manufacturer GR
Package TSSOP-16
Category Amplifiers/Comparators
Pins 16

Ordering variants

Same part, different packaging or reel option.

  • SA571TS16ARDQ

CAD (KiCad official)

  • Symbol: SA571TS16ARDQ
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: sa571ts16ardq-etched.step / sa571ts16ardq-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sa571ts16ardq.step / sa571ts16ardq.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GR datasheet (16 pp, sha256 a76b6868f174fe0d, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF