← Commit history
page.json+20−17@@ -32,19 +32,19 @@ "number": "1", "name": "CAP1.rect", "type": "passive",- "description": "Channel 1 rectifier filter-capacitor terminal (CRECT1). External capacitor to ground sets the rectifier averaging time constant (\u03c4 = 10 k\u03a9 \u00d7 CRECT). Node is biased at VREF (1.8 V)."+ "description": "Channel 1 rectifier filter-capacitor terminal (CRECT1). External capacitor to ground sets the rectifier averaging time constant (τ = 10 kΩ × CRECT). Node is biased at VREF (1.8 V)." }, { "number": "2", "name": "IN1.rect", "type": "input",- "description": "Channel 1 rectifier input. Signal current from VIN flows through external 2.2 \u00b5F coupling cap and internal 10 k\u03a9 (R1) into the full-wave rectifier summing node biased at VREF."+ "description": "Channel 1 rectifier input. Signal current from VIN flows through external 2.2 µF coupling cap and internal 10 kΩ (R1) into the full-wave rectifier summing node biased at VREF." }, { "number": "3",- "name": "IN1.\u0394G",+ "name": "IN1.ΔG", "type": "input",- "description": "Channel 1 variable-gain (\u0394G) cell input. Signal current flows through external coupling cap and internal 20 k\u03a9 (R2) into the \u0394G summing node biased at VREF."+ "description": "Channel 1 variable-gain (ΔG) cell input. Signal current flows through external coupling cap and internal 20 kΩ (R2) into the ΔG summing node biased at VREF." }, { "number": "4",@@ -56,49 +56,49 @@ "number": "5", "name": "IN1.inv", "type": "input",- "description": "Channel 1 op-amp inverting input, also tied internally to the \u0394G cell output and to internal R3 (20 k\u03a9) / R4 (30 k\u03a9). Non-inverting input is internally tied to VREF (1.8 V)."+ "description": "Channel 1 op-amp inverting input, also tied internally to the ΔG cell output and to internal R3 (20 kΩ) / R4 (30 kΩ). Non-inverting input is internally tied to VREF (1.8 V)." }, { "number": "6", "name": "R31.res", "type": "passive",- "description": "Channel 1 summing-node/feedback tap, brought out from the internal R3 (20 k\u03a9) that goes from the summing node to the op-amp output. Allows compressor/expandor gain to be set by internal or external resistors."+ "description": "Channel 1 summing-node/feedback tap, brought out from the internal R3 (20 kΩ) that goes from the summing node to the op-amp output. Allows compressor/expandor gain to be set by internal or external resistors." }, { "number": "7", "name": "OUT1", "type": "output",- "description": "Channel 1 op-amp output. \u00b120 mA output current capability; capable of +13 dBm (3.5 VRMS) into 300 \u03a9."+ "description": "Channel 1 op-amp output. ±20 mA output current capability; capable of +13 dBm (3.5 VRMS) into 300 Ω." }, { "number": "8", "name": "THD1.trim", "type": "passive",- "description": "Channel 1 THD (total-harmonic-distortion) trim terminal for the \u0394G cell. Allows nulling of internal offset voltage to minimize even-harmonic distortion; node sits at VREF potential."+ "description": "Channel 1 THD (total-harmonic-distortion) trim terminal for the ΔG cell. Allows nulling of internal offset voltage to minimize even-harmonic distortion; node sits at VREF potential." }, { "number": "9", "name": "THD2.trim", "type": "passive",- "description": "Channel 2 THD trim terminal for the \u0394G cell. Allows nulling of internal offset voltage; node sits at VREF potential."+ "description": "Channel 2 THD trim terminal for the ΔG cell. Allows nulling of internal offset voltage; node sits at VREF potential." }, { "number": "10", "name": "OUT2", "type": "output",- "description": "Channel 2 op-amp output. \u00b120 mA output current capability; +13 dBm into 300 \u03a9."+ "description": "Channel 2 op-amp output. ±20 mA output current capability; +13 dBm into 300 Ω." }, { "number": "11", "name": "R32.res", "type": "passive",- "description": "Channel 2 summing-node/feedback tap through the internal R3 (20 k\u03a9) from summing node to op-amp output; enables external gain adjustment."+ "description": "Channel 2 summing-node/feedback tap through the internal R3 (20 kΩ) from summing node to op-amp output; enables external gain adjustment." }, { "number": "12", "name": "IN2.inv", "type": "input",- "description": "Channel 2 op-amp inverting input, tied internally to the \u0394G cell output and internal R3/R4 network; non-inverting input is internally tied to VREF."+ "description": "Channel 2 op-amp inverting input, tied internally to the ΔG cell output and internal R3/R4 network; non-inverting input is internally tied to VREF." }, { "number": "13",@@ -108,21 +108,21 @@ }, { "number": "14",- "name": "IN2.\u0394G",+ "name": "IN2.ΔG", "type": "input",- "description": "Channel 2 variable-gain (\u0394G) cell input through internal 20 k\u03a9 (R2) into the \u0394G summing node biased at VREF."+ "description": "Channel 2 variable-gain (ΔG) cell input through internal 20 kΩ (R2) into the ΔG summing node biased at VREF." }, { "number": "15", "name": "IN2.rect", "type": "input",- "description": "Channel 2 rectifier input through internal 10 k\u03a9 (R1) into the full-wave rectifier summing node biased at VREF."+ "description": "Channel 2 rectifier input through internal 10 kΩ (R1) into the full-wave rectifier summing node biased at VREF." }, { "number": "16", "name": "CAP2.rect", "type": "passive",- "description": "Channel 2 rectifier filter-capacitor terminal (CRECT2). External cap to ground sets rectifier averaging time constant (\u03c4 = 10 k\u03a9 \u00d7 CRECT). Node biased at VREF."+ "description": "Channel 2 rectifier filter-capacitor terminal (CRECT2). External cap to ground sets rectifier averaging time constant (τ = 10 kΩ × CRECT). Node biased at VREF." } ], "provenance": {@@ -192,5 +192,8 @@ "docs/sa571ts16ardq-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }