← Commit history
README.mdadded+57@@ -0,0 +1,57 @@+# SA571TS16ARDQ++**GR** · Special Purpose Amplifiers · TSSOP-16++SA571TS16ARDQ from GR, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CAP1.rect | passive | Channel 1 rectifier filter-capacitor terminal (CRECT1). External capacitor to ground sets the rectifier averaging time constant (τ = 10 kΩ × CRECT). Node is biased at VREF (1.8 V). |+| 2 | IN1.rect | input | Channel 1 rectifier input. Signal current from VIN flows through external 2.2 µF coupling cap and internal 10 kΩ (R1) into the full-wave rectifier summing node biased at VREF. |+| 3 | IN1.ΔG | input | Channel 1 variable-gain (ΔG) cell input. Signal current flows through external coupling cap and internal 20 kΩ (R2) into the ΔG summing node biased at VREF. |+| 4 | GND | power_in | Device ground return. Common ground for both channels and internal bandgap reference. |+| 5 | IN1.inv | input | Channel 1 op-amp inverting input, also tied internally to the ΔG cell output and to internal R3 (20 kΩ) / R4 (30 kΩ). Non-inverting input is internally tied to VREF (1.8 V). |+| 6 | R31.res | passive | Channel 1 summing-node/feedback tap, brought out from the internal R3 (20 kΩ) that goes from the summing node to the op-amp output. Allows compressor/expandor gain to be set by internal or external resistors. |+| 7 | OUT1 | output | Channel 1 op-amp output. ±20 mA output current capability; capable of +13 dBm (3.5 VRMS) into 300 Ω. |+| 8 | THD1.trim | passive | Channel 1 THD (total-harmonic-distortion) trim terminal for the ΔG cell. Allows nulling of internal offset voltage to minimize even-harmonic distortion; node sits at VREF potential. |+| 9 | THD2.trim | passive | Channel 2 THD trim terminal for the ΔG cell. Allows nulling of internal offset voltage; node sits at VREF potential. |+| 10 | OUT2 | output | Channel 2 op-amp output. ±20 mA output current capability; +13 dBm into 300 Ω. |+| 11 | R32.res | passive | Channel 2 summing-node/feedback tap through the internal R3 (20 kΩ) from summing node to op-amp output; enables external gain adjustment. |+| 12 | IN2.inv | input | Channel 2 op-amp inverting input, tied internally to the ΔG cell output and internal R3/R4 network; non-inverting input is internally tied to VREF. |+| 13 | VCC | power_in | Positive supply rail. Operating range 6 V to 18 V; typical ICC = 4.2 mA (4.8 mA max) with no signal. |+| 14 | IN2.ΔG | input | Channel 2 variable-gain (ΔG) cell input through internal 20 kΩ (R2) into the ΔG summing node biased at VREF. |+| 15 | IN2.rect | input | Channel 2 rectifier input through internal 10 kΩ (R1) into the full-wave rectifier summing node biased at VREF. |+| 16 | CAP2.rect | passive | Channel 2 rectifier filter-capacitor terminal (CRECT2). External cap to ground sets rectifier averaging time constant (τ = 10 kΩ × CRECT). Node biased at VREF. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | GR |+| Package | TSSOP-16 |+| Category | Amplifiers/Comparators |+| Pins | 16 |++## Ordering variants++Same part, different packaging or reel option.++- `SA571TS16ARDQ`++## CAD (KiCad official)++- Symbol: `SA571TS16ARDQ`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [GR datasheet](docs/sa571ts16ardq-datasheet.pdf) (16 pp, sha256 `a76b6868f174fe0d`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/sa571ts16ardq-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "sa571ts16ardq",+ "version": "0.1.0",+ "type": "component",+ "description": "GR Special Purpose Amplifiers, TSSOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "sa571ts16ardq"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "sa571ts16ardq.kicad_sym",+ "sa571ts16ardq.kicad_mod",+ "sa571ts16ardq.glb",+ "sa571ts16ardq.step",+ "sa571ts16ardq.lbr",+ "docs/hero.png",+ "docs/sa571ts16ardq-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}