main
Ray Publish 0.1.2 636e0ee
{
  "slug": "sa555m",
  "version": "0.1.2",
  "type": "component",
  "description": "HGSEMI Timers / Clock Oscillators, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "rtc",
    "sa555m"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "sa555m.kicad_sym",
    "sa555m.kicad_mod",
    "sa555m.glb",
    "sa555m.step",
    "sa555m.lbr",
    "docs/hero.png",
    "docs/sa555m-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "sa555m-etched.step",
    "sa555m-etched.glb",
    "sa555m-hero.glb",
    "sa555m-hero.overlay.json"
  ],
  "component": {
    "mpn": "SA555M",
    "manufacturer": "HGSEMI",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Timers / Clock Oscillators",
    "parts": {
      "symbol": "sa555m.kicad_sym",
      "footprint": "sa555m.kicad_mod",
      "model_3d": "sa555m-hero.glb",
      "model_3d_plain": "sa555m.glb",
      "model_3d_step": "sa555m-etched.step",
      "model_3d_step_plain": "sa555m.step",
      "lbr": "sa555m.lbr"
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground / 0 V reference for the device. All internal timing, comparator, and output-stage return currents flow through this pin."
      },
      {
        "number": "2",
        "name": "RTIG",
        "type": "input",
        "description": "Trigger input. A negative-going pulse below 1/3 VCC (typ. 1.67 V at VCC=5 V, 5 V at VCC=15 V) sets the internal flip-flop, driving OUT high and starting the timing cycle. Input current ~0.5 uA typ."
      },
      {
        "number": "3",
        "name": "OUT",
        "type": "output",
        "description": "Push-pull output stage. Sources up to ~200 mA (VOH ≈ 12.5 V at VCC=15 V, IS=200 mA) or sinks up to ~200 mA (VOL ≈ 2.5 V at VCC=15 V, ISINK=200 mA). Rise/fall times ~100 ns."
      },
      {
        "number": "4",
        "name": "R",
        "type": "input",
        "description": "Active-low reset input. Pulling below ~0.4-1 V (typ. 0.5 V) forces the internal flip-flop reset, discharging the timing capacitor and driving OUT low regardless of TRIG/THRES state. Reset current ~0.1 mA typ. Tie to VCC when unused."
      },
      {
        "number": "5",
        "name": "CONTRIG",
        "type": "input",
        "description": "Control voltage (CV) input to the internal 2/3 VCC threshold reference. Nominally 2/3 VCC (typ. 3.33 V at VCC=5 V, 10 V at VCC=15 V). Bypass to GND with a 0.01 uF capacitor when unused; can be driven to modulate output pulse width (PWM/PPM)."
      },
      {
        "number": "6",
        "name": "CONTH",
        "type": "input",
        "description": "Threshold input. When the voltage on this pin rises above 2/3 VCC (typ. 0.667*VCC), the internal comparator resets the flip-flop, driving OUT low and turning on the discharge transistor. Input current ~0.1 uA typ."
      },
      {
        "number": "7",
        "name": "DIS",
        "type": "output",
        "description": "Discharge open-collector output from an internal NPN transistor whose collector is tied here and emitter to GND. Provides the discharge path for the external timing capacitor when OUT is low. V7(SAT) ~180 mV at 15 mA sink; leakage ~20 nA typ."
      },
      {
        "number": "8",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply pin. Operating range 4.5 V to 16 V (absolute max 18 V). Typical quiescent current 3 mA at VCC=5 V, 10 mA at VCC=15 V (RL=∞)."
      }
    ],
    "provenance": {
      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "cad_basis": {
        "from": [
          "README CAD section (factory cad_wording)",
          ".kicad_mod model path agrees"
        ],
        "missing": []
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "distributor_links": {
      "digikey": false,
      "mouser": false
    },
    "distributor_check": {
      "checked_at": "2026-10-05T19:16:01Z",
      "source": "Component Ocean /api/assign-pns + lcsc_map",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "models_3d": [
      {
        "file": "sa555m.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "sa555m-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "99094b42c9fedb3e583d11a08402e634103965f58ee8e147337c84019874cb4c",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "visibility": "public"
}