Generated by kicad-footprint-generator · KiCad file format 20260206
S9S12P64J0MFT
NXP Semicon · Pre-ordered MCUs · QFN-48-EP(7x7)
S9S12P64J0MFT from NXP Semicon, in a QFN-48-EP(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PP3 | bidirectional | Port P general-purpose I/O with keypad wakeup KWP3 and PWM channel 3 output (ETRIG1 routing also listed); pull device disabled after reset. |
| 2 | PP2 | bidirectional | Port P general-purpose I/O with keypad wakeup KWP2 and PWM channel 2 output; pull device disabled after reset. |
| 3 | PP1 | bidirectional | Port P general-purpose I/O with keypad wakeup KWP1 and PWM channel 1 output; pull device disabled after reset. |
| 4 | PT0 | bidirectional | Port T general-purpose I/O that can serve as timer channel IOC0 or PWM channel 0 output; pull device disabled after reset. |
| 5 | PT1 | bidirectional | Port T general-purpose I/O that can serve as timer channel IOC1; pull device disabled after reset. |
| 6 | PT2 | bidirectional | Port T general-purpose I/O that can serve as timer channel IOC2; pull device disabled after reset. |
| 7 | PT3 | bidirectional | Port T general-purpose I/O that can serve as timer channel IOC3; pull device disabled after reset. |
| 8 | PT4 | bidirectional | Port T general-purpose I/O that can serve as timer channel IOC4 or PWM channel 4 output; pull device disabled after reset. |
| 9 | PT5 | bidirectional | Port T general-purpose I/O that can serve as timer channel IOC5, PWM channel 5 output, or API_EXTCLK output; pull device disabled after reset. |
| 10 | PT6 | bidirectional | Port T general-purpose I/O that can serve as timer channel IOC6; pull device disabled after reset. |
| 11 | PT7 | bidirectional | Port T general-purpose I/O that can serve as timer channel IOC7; pull device disabled after reset. |
| 12 | BKGD | bidirectional | Pseudo-open-drain background debug communication pin with internal pull-up, always on; its state is latched into MODC on the rising edge of RESET to select the operating mode. |
| 13 | PE7 | bidirectional | Port E general-purpose I/O that can output the free-running ECLKX2 clock (twice the bus clock); internal pull-up is enabled after reset. |
| 14 | PE4 | bidirectional | Port E general-purpose I/O that can drive the bus clock ECLK with a programmable prescaler; internal pull-up is enabled after reset. |
| 15 | VSSX2 | power_in | Ground for the I/O drivers at 0 V nominal; all VSSX pins are connected together internally. |
| 16 | VDDX2 | power_in | Power supply for the I/O drivers at 5.0 V nominal; all VDDX pins are connected together internally. |
| 17 | RESET | bidirectional | Active-low bidirectional reset: acts as an input to initialize the MCU to a known state and as an output when an internal reset source asserts; has an internal pull-up. |
| 18 | VDDR | power_in | Power supply input to the internal voltage regulator at 5.0 V nominal. |
| 19 | VSS3 | power_in | Core ground return for the internally regulated nominal 1.8 V supply; no static external loading of this pin is permitted. |
| 20 | VSSPLL | power_in | Ground for the oscillator and phase-locked loop, separately bypassable from the core ground; derived from the internal regulator. |
| 21 | EXTAL | input | Crystal driver and external clock input for the oscillator. |
| 22 | XTAL | output | Oscillator output for the crystal driver. |
| 23 | PJ2 | bidirectional | Port J general-purpose I/O with keypad wakeup KWJ2 and interrupt capability; internal pull-up is enabled after reset. |
| 24 | PE1 | input | General-purpose input and maskable IRQ interrupt request input that can wake the MCU from stop or wait mode; internal pull-up is enabled after reset. |
| 25 | PE0 | input | General-purpose input and non-maskable, level-sensitive active-low XIRQ interrupt input; while it is low the MCU will not enter STOP mode. |
| 26 | PAD08 | bidirectional | Port AD general-purpose I/O that doubles as ATD analog input AN08, supplied from VDDA. |
| 27 | PAD09 | bidirectional | Port AD general-purpose I/O that doubles as ATD analog input AN09, supplied from VDDA. |
| 28 | PAD00 | bidirectional | Port AD general-purpose I/O that doubles as ATD analog input AN00, supplied from VDDA. |
| 29 | PAD01 | bidirectional | Port AD general-purpose I/O that doubles as ATD analog input AN01, supplied from VDDA. |
| 30 | PAD02 | bidirectional | Port AD general-purpose I/O that doubles as ATD analog input AN02, supplied from VDDA. |
| 31 | PAD03 | bidirectional | Port AD general-purpose I/O that doubles as ATD analog input AN03, supplied from VDDA. |
| 32 | PAD04 | bidirectional | Port AD general-purpose I/O that doubles as ATD analog input AN04, supplied from VDDA. |
| 33 | PAD05 | bidirectional | Port AD general-purpose I/O that doubles as ATD analog input AN05, supplied from VDDA. |
| 34 | PAD06 | bidirectional | Port AD general-purpose I/O that doubles as ATD analog input AN06, supplied from VDDA. |
| 35 | PAD07 | bidirectional | Port AD general-purpose I/O that doubles as ATD analog input AN07, supplied from VDDA. |
| 36 | VDDA/VRH | power_in | Shared pin on the 48-pin package: VDDA is the 5.0 V supply for the ATD and voltage regulator, and VRH is the ATD high reference input at 5.0 V nominal. |
| 37 | VSSA/VRL | power_in | Shared pin on the 48-pin package: VRL is the ATD low reference input at 0 V and VSSA is the ground for the ATD and voltage regulator. |
| 38 | PS0 | bidirectional | Port S general-purpose I/O that can serve as SCI receive pin RXD; internal pull-up is enabled after reset. |
| 39 | PS1 | bidirectional | Port S general-purpose I/O that can serve as SCI transmit pin TXD; internal pull-up is enabled after reset. |
| 40 | TEST | input | Input-only pin reserved for factory test with internal pull-down; it must be tied to VSSX in all applications. |
| 41 | PM5 | bidirectional | Port M general-purpose I/O that can serve as SPI serial clock SCK. |
| 42 | PM4 | bidirectional | Port M general-purpose I/O that can serve as SPI master-out/slave-in MOSI. |
| 43 | PM3 | bidirectional | Port M general-purpose I/O that can serve as SPI slave select SS. |
| 44 | PM2 | bidirectional | Port M general-purpose I/O that can serve as SPI master-in/slave-out MISO. |
| 45 | PM1 | bidirectional | Port M general-purpose I/O that can serve as MSCAN transmit pin TXCAN. |
| 46 | PM0 | bidirectional | Port M general-purpose I/O that can serve as MSCAN receive pin RXCAN. |
| 47 | VSSX1 | power_in | Ground for the I/O drivers at 0 V nominal; all VSSX pins are connected together internally. |
| 48 | VDDX1 | power_in | Power supply for the I/O drivers at 5.0 V nominal; all VDDX pins are connected together internally. |
| 49 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | QFN-48-EP(7x7) |
| Category | Embedded Processors & Controllers |
| Pins | 49 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| I/O, regulator and analog supply voltage | VDD35 | -0.3 | 6 | V | 503 | ||
| Voltage difference VDDX to VDDA | ∆VDDX | -6 | 0.3 | V | 503 | ||
| Voltage difference VSSX to VSSA | ∆VSSX | -0.3 | 0.3 | V | 503 | ||
| Digital I/O input voltage | VIN | -0.3 | 6 | V | 503 | ||
| Analog reference | VRH, VRL | -0.3 | 6 | V | 503 | ||
| EXTAL, XTAL | VILV | -0.3 | 2.16 | V | 503 | ||
| Instantaneous maximum current, single pin limit for all digital I/O pins | ID | -25 | 25 | mA | 503 | ||
| Instantaneous maximum current, single pin limit EXTAL, XTAL | IDL | -25 | 25 | mA | 503 | ||
| Storage temperature range | Tstg | -65 | 155 | °C | 503 | ||
| I/O, regulator and analog supply voltage | VDD35 | 3.13 | 5 | 5.5 | V | 504 | |
| Voltage difference VDDR to VDDX | ∆VDDR | -0.1 | 0 | 0.1 | V | 504 | |
| Voltage difference VSS3, VSSPLL to VSSX | ∆VSS | -0.1 | 0 | 0.1 | V | 504 | |
| Digital logic supply voltage | VDD | 1.72 | 1.8 | 1.98 | V | 504 | |
| Oscillator | fosc | 4 | 16 | MHz | 505 | ||
| Bus frequency | fbus | 0.5 | 32 | MHz | 505 | ||
| Operating junction temperature range | TJ | -40 | 150 | °C | Temperature Option M | 505 | |
| Operating ambient temperature range | TA | -40 | 125 | °C | Temperature Option M | 505 | |
| Thermal resistance QFN 48, single sided PCB | θJA | 82 | °C/W | QFN 48, single sided PCB | 506 | ||
| Thermal resistance QFN 48, double sided PCB with 2 internal planes | θJA | 28 | °C/W | QFN 48, double sided PCB with 2 internal planes | 506 | ||
| Junction to Board QFN 48 | θJB | 11 | °C/W | 506 | |||
| Junction to Case QFN 48 | θJC | 1.4 | °C/W | 506 | |||
| Junction to Case (Bottom) QFN 48 | ΨJT | 4 | °C/W | 506 | |||
| Input leakage current (pins in high impedance input mode) | Iin | -1 | 1 | µA | Vin = VDD35 or VSS35; M temperature range -40°C to +150°C; 4.5 V < VDD35 < 5.5 V | 509 | |
| Output low voltage (pins in output mode), Partial Drive | VOL | 0.8 | V | IOL = +2 mA; 4.5 V < VDD35 < 5.5 V | 509 | ||
| Output low voltage (pins in output mode), Full Drive | VOL | 0.8 | V | IOL = +10 mA; 4.5 V < VDD35 < 5.5 V | 509 | ||
| Internal pull up resistance | RPUL | 25 | 50 | KΩ | VIH min > input voltage > VIL max; 4.5 V < VDD35 < 5.5 V | 509 | |
| Internal pull down resistance | RPDH | 25 | 50 | KΩ | VIH min > input voltage > VIL max; 4.5 V < VDD35 < 5.5 V | 509 | |
| Injection current, single pin limit | IICS | -2.5 | 2.5 | mA | 4.5 V < VDD35 < 5.5 V | 509 | |
| Injection current, total device limit, sum of all injected currents | IICP | -25 | 25 | mA | 4.5 V < VDD35 < 5.5 V | 509 | |
| Port J, P interrupt input pulse filtered (STOP) | tPULSE | 3 | µs | Parameter applies in stop or pseudo stop mode; 4.5 V < VDD35 < 5.5 V | 509 | ||
| Port J, P interrupt input pulse passed (STOP) | tPULSE | 10 | µs | Parameter applies in stop or pseudo stop mode; 4.5 V < VDD35 < 5.5 V | 509 | ||
| Port J, P interrupt input pulse filtered (STOP) | tPULSE | 3 | tcyc | 4.5 V < VDD35 < 5.5 V | 509 | ||
| Port J, P interrupt input pulse passed (STOP) | tPULSE | 4 | tcyc | 4.5 V < VDD35 < 5.5 V | 509 | ||
| IRQ pulse width, edge-sensitive mode (STOP) | PWIRQ | 1 | tcyc | 4.5 V < VDD35 < 5.5 V | 509 | ||
| Run current | IDDR | 18 | 20 | mA | VDDR=5.5V, TA=125°C; PLL on, bus 32 MHz | 511 | |
| Wait current | IDDW | 11 | 12 | mA | VDDR=5.5V, TA=125°C | 511 | |
| Stop current, API disabled, 150°C | IDDS | 250 | 1100 | µA | VDDR=5.5V; API disabled; 150°C | 511 | |
| Stop current, API disabled, -40°C | IDDS | 15 | 35 | µA | VDDR=5.5V; API disabled; -40°C | 511 | |
| Stop current, API disabled, 25°C | IDDS | 25 | 50 | µA | VDDR=5.5V; API disabled; 25°C | 511 | |
| Voltage difference VDDX to VDDA | ∆VDDX | -2.35 | 0 | 0.1 | V | 3.13 V < VDDA < 5.5 V | 512 |
| Voltage difference VSSX to VSSA | ∆VSSX | -0.1 | 0 | 0.1 | V | 3.13 V < VDDA < 5.5 V | 512 |
| Differential reference voltage | VRH-VRL | 3.13 | 5 | 5.5 | V | Full accuracy not guaranteed when differential voltage is less than 4.50 V | 512 |
| ATD Clock Frequency (derived from bus clock via the prescaler) | fATDCLk | 0.25 | 8 | MHz | 512 | ||
| ATD Clock Frequency in Stop mode (internal generated temperature and voltage dependent clock, ICLK) | 0.6 | 1 | 1.7 | MHz | 512 | ||
| ADC conversion in stop, recovery time | tATDSTPRCV | 1.5 | us | 512 | |||
| ATD Conversion Period, 12 bit resolution | NCONV12 | 20 | 42 | ATD clock Cycles | 12 bit resolution | 512 | |
| Max input source resistance | RS | 1 | KΩ | Conditions shown in Table A-4 unless otherwise noted | 514 | ||
| Input internal Resistance | RINA | 5 | 15 | kΩ | 514 | ||
| Disruptive analog input current | INA | -2.5 | 2.5 | mA | 514 | ||
| Differential Nonlinearity 12-Bit | DNL | -4 | 2 | 4 | counts | VREF=VRH-VRL=5.12 V; fATDCLK=8.0 MHz | 517 |
| Integral Nonlinearity 12-Bit | INL | -5 | 2.5 | 5 | counts | VREF=VRH-VRL=5.12 V; fATDCLK=8.0 MHz | 517 |
| Absolute Error 12-Bit | AE | -7 | 4 | 7 | counts | VREF=VRH-VRL=5.12 V; fATDCLK=8.0 MHz | 517 |
| Differential Nonlinearity 10-Bit | DNL | -1 | 0.5 | 1 | counts | VREF=VRH-VRL=5.12 V; fATDCLK=8.0 MHz | 517 |
| Integral Nonlinearity 10-Bit | INL | -2 | 1 | 2 | counts | VREF=VRH-VRL=5.12 V; fATDCLK=8.0 MHz | 517 |
| Absolute Error 10-Bit | AE | -3 | 2 | 3 | counts | VREF=VRH-VRL=5.12 V; fATDCLK=8.0 MHz | 517 |
| Differential Nonlinearity 8-Bit | DNL | -0.5 | 0.3 | 0.5 | counts | VREF=VRH-VRL=5.12 V; fATDCLK=8.0 MHz | 517 |
| Integral Nonlinearity 8-Bit | INL | -1 | 0.5 | 1 | counts | VREF=VRH-VRL=5.12 V; fATDCLK=8.0 MHz | 517 |
| Absolute Error 8-Bit | AE | -1.5 | 1 | 1.5 | counts | VREF=VRH-VRL=5.12 V; fATDCLK=8.0 MHz | 517 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Line 1 00 PC1 (Initial 18-bit PC Base Address) | 185 |
CAD (KiCad official)
- Symbol:
S9S12P64J0MFT - Footprint:
Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm - 3D model: QFN-48-EP(7x7) (KiCad packages3D, STEP)
- 3D model files:
s9s12p64j0mft-etched.step/s9s12p64j0mft-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s9s12p64j0mft.step/s9s12p64j0mft.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (566 pp, sha256
5e16b10c34c13ada, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).