Generated by kicad-footprint-generator · KiCad file format 20260206
S25FS128SAGMFI100
Cypress Semicon · Pre-ordered Products · SOIC-8
S25FS128SAGMFI100 from Cypress Semicon, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS# | input | Chip select input; driving CS# HIGH ends a read data transfer and terminates the RDID sequence. |
| 2 | SO/IO1 | bidirectional | Serial data output in single-bit SPI modes and IO1 data line in Dual and Quad I/O modes. |
| 3 | WP#/IO2 | bidirectional | Write protect pin in SPI mode, which doubles as IO2 data line in Quad modes. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | SI/IO0 | bidirectional | Serial data input in single-bit SPI modes and IO0 data line in Dual and Quad I/O modes. |
| 6 | SCK | input | Serial clock input that latches address and command bits on its rising edge. |
| 7 | IO3/RESET# | bidirectional | IO3 data line in Quad modes and active-low RESET# input with an internal pull-up, which may be left unconnected if Quad Mode and hardware reset are not used. |
| 8 | VCC | power_in | Supply voltage input, specified as 1.7 V to 2.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Cypress Semicon |
| Package | SOIC-8 |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
S25FS128SAGMFI100 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
s25fs128sagmfi100-etched.step/s25fs128sagmfi100-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s25fs128sagmfi100.step/s25fs128sagmfi100.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Cypress Semicon datasheet (189 pp, sha256
24221f11a9b82e7b, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).