main
Ray
Publish 0.1.0
9c660cc
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195
{
"slug": "s25fs064sagmfi010",
"version": "0.1.0",
"type": "component",
"description": "Infineon/Cypress Semicon NOR FLASH, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"memory",
"s25fs064sagmfi010",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"s25fs064sagmfi010.kicad_sym",
"s25fs064sagmfi010.kicad_mod",
"s25fs064sagmfi010.glb",
"s25fs064sagmfi010.step",
"s25fs064sagmfi010.lbr",
"docs/hero.png",
"docs/s25fs064sagmfi010-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"s25fs064sagmfi010-hero.glb",
"s25fs064sagmfi010-hero.overlay.json",
"s25fs064sagmfi010-etched.glb"
],
"component": {
"mpn": "S25FS064SAGMFI010",
"manufacturer": "Infineon/Cypress Semicon",
"package": "SOIC-8",
"pin_count": 8,
"category": "Memory",
"subcategory": "NOR FLASH",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/7c765b5506500a7b05162c5c0622efd4.pdf",
"parts": {
"symbol": "s25fs064sagmfi010.kicad_sym",
"footprint": "s25fs064sagmfi010.kicad_mod",
"model_3d": "s25fs064sagmfi010-hero.glb",
"model_3d_plain": "s25fs064sagmfi010-etched.glb",
"model_3d_step": "s25fs064sagmfi010-etched.step",
"model_3d_step_plain": "s25fs064sagmfi010.step",
"lbr": "s25fs064sagmfi010.lbr"
},
"distributor_links": {
"lcsc": "C2931553",
"digikey": "2156-S25FS064SAGMFI010-ND",
"mouser": "727-S25FS064SAGMFI01"
},
"distributor_check": {
"checked_at": "2026-10-28T20:21:37Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "2156-S25FS064SAGMFI010-ND",
"status": "found",
"lifecycle": "Obsolete"
},
"mouser": {
"pn": "727-S25FS064SAGMFI01",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "CS#",
"type": "input",
"description": "Chip Select: when HIGH the device is deselected, ignores all inputs except RESET#/IO3_RESET#, outputs are high impedance and it is in Standby; driving LOW enables the device."
},
{
"number": "2",
"name": "SO / IO1",
"type": "bidirectional",
"description": "Serial Output for single bit data commands, and IO1 for Dual or Quad commands."
},
{
"number": "3",
"name": "WP# / IO2",
"type": "bidirectional",
"description": "Write Protect when not in Quad mode (CR1V[1]=0 and SR1NV[7]=1) and IO2 in Quad mode (CR1V[1]=1); has an internal pull-up and may be left unconnected if not used."
},
{
"number": "4",
"name": "VSS",
"type": "power_in",
"description": "Ground: common voltage drain and ground reference for the device core, input receivers and output drivers."
},
{
"number": "5",
"name": "SI / IO0",
"type": "bidirectional",
"description": "Serial Input for single bit data commands, and IO0 for Dual or Quad commands; values are latched on the rising edge of SCK."
},
{
"number": "6",
"name": "SCK",
"type": "input",
"description": "Serial Clock: inputs are latched on the rising edge, and SDR output data changes after the falling edge (DDR after every edge)."
},
{
"number": "7",
"name": "IO3 / RESET#",
"type": "bidirectional",
"description": "IO3 in Quad mode when CS# is LOW, or hardware RESET# when enabled by CR2V[5]=1 and not in Quad mode or CS# is HIGH; has an internal pull-up and may be left unconnected if not used."
},
{
"number": "8",
"name": "VCC",
"type": "power_in",
"description": "Power supply for all device internal logic and functions including read, program and erase, 1.7 V to 2.0 V."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The SOIC-8 figure (Figure 1, page 14) is garbled in the extracted text: the signal labels appear in ; The RESET# function on IO3/RESET# depends on CR2V[5] and CR1V[1]. The pin is only a RESET# input in "
],
"pages_sent": 22,
"cost_usd": 0.1091,
"at": "2026-10-28T20:21:12"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/7c765b5506500a7b05162c5c0622efd4.pdf",
"pages": 172,
"sha256": "f2e0ff9948688c22",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 8,
"described": 8,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "s25fs064sagmfi010.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "s25fs064sagmfi010-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
4.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "518063c8740eaf1d5a8fd9ee0e1d1c2ed2876238f6d069119d01b16bc10c0741",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}