main
Ray
Publish 0.1.0
d892656
S25FL512SAGMFV010
Cypress Semicon · Pre-ordered Products · SOIC-16-300mil
S25FL512SAGMFV010 from Cypress Semicon, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HOLD#/IO3 | bidirectional | Hold input in single/dual SPI modes and IO3 data pin in Quad mode. |
| 2 | VCC | power_in | Core supply voltage, 2.7 V to 3.6 V. |
| 3 | RESET#/RFU | unconnected | Model 01 (EHPLC, SO footprint without RESET#) does not bond RESET# to this connector, so it is RFU and left unconnected. |
| 4 | DNU | unconnected | Do not use; leave unconnected. |
| 5 | DNU | unconnected | Do not use; leave unconnected. |
| 6 | RFU | unconnected | Reserved for future use; leave unconnected. |
| 7 | CS# | input | Chip select input that enables the device when driven low. |
| 8 | SO/IO1 | bidirectional | Serial data output in single SPI mode and IO1 data pin in Dual/Quad modes. |
| 9 | WP#/IO2 | bidirectional | Write protect input in single/dual SPI modes and IO2 data pin in Quad mode. |
| 10 | VSS | power_in | Ground reference. |
| 11 | DNU | unconnected | Do not use; leave unconnected. |
| 12 | DNU | unconnected | Do not use; leave unconnected. |
| 13 | NC | unconnected | No internal connection. |
| 14 | VIO/RFU | unconnected | Model 01 does not bond VIO to this connector (I/O supply tied to VCC inside the package), so it is RFU and left unconnected. |
| 15 | SI/IO0 | bidirectional | Serial data input in single SPI mode and IO0 data pin in Dual/Quad modes. |
| 16 | SCK | input | Serial clock input; SPI modes 0 and 3 are supported. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Cypress Semicon |
| Package | SOIC-16-300mil |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
S25FL512SAGMFV010 - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
s25fl512sagmfv010-etched.step/s25fl512sagmfv010-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s25fl512sagmfv010.step/s25fl512sagmfv010.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Cypress Semicon datasheet, copy hosted by LCSC (161 pp, sha256
d1b81b9155595e47, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# S25FL512SAGMFV010
**Cypress Semicon** · Pre-ordered Products · SOIC-16-300mil
S25FL512SAGMFV010 from Cypress Semicon, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | HOLD#/IO3 | bidirectional | Hold input in single/dual SPI modes and IO3 data pin in Quad mode. |
| 2 | VCC | power_in | Core supply voltage, 2.7 V to 3.6 V. |
| 3 | RESET#/RFU | unconnected | Model 01 (EHPLC, SO footprint without RESET#) does not bond RESET# to this connector, so it is RFU and left unconnected. |
| 4 | DNU | unconnected | Do not use; leave unconnected. |
| 5 | DNU | unconnected | Do not use; leave unconnected. |
| 6 | RFU | unconnected | Reserved for future use; leave unconnected. |
| 7 | CS# | input | Chip select input that enables the device when driven low. |
| 8 | SO/IO1 | bidirectional | Serial data output in single SPI mode and IO1 data pin in Dual/Quad modes. |
| 9 | WP#/IO2 | bidirectional | Write protect input in single/dual SPI modes and IO2 data pin in Quad mode. |
| 10 | VSS | power_in | Ground reference. |
| 11 | DNU | unconnected | Do not use; leave unconnected. |
| 12 | DNU | unconnected | Do not use; leave unconnected. |
| 13 | NC | unconnected | No internal connection. |
| 14 | VIO/RFU | unconnected | Model 01 does not bond VIO to this connector (I/O supply tied to VCC inside the package), so it is RFU and left unconnected. |
| 15 | SI/IO0 | bidirectional | Serial data input in single SPI mode and IO0 data pin in Dual/Quad modes. |
| 16 | SCK | input | Serial clock input; SPI modes 0 and 3 are supported. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Cypress Semicon |
| Package | SOIC-16-300mil |
| Category | Electronic Tools/Instruments/Consumables |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `S25FL512SAGMFV010`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `s25fl512sagmfv010-etched.step` / `s25fl512sagmfv010-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `s25fl512sagmfv010.step` / `s25fl512sagmfv010.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Cypress Semicon datasheet, copy hosted by LCSC](docs/s25fl512sagmfv010-datasheet.pdf) (161 pp, sha256 `d1b81b9155595e47`, retrieved 2026-11-21)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/s25fl512sagmfv010-datasheet.pdf)