S25FL256SAGMFIG03

{
  "slug": "s25fl256sagmfig03",
  "version": "0.1.0",
  "type": "component",
  "description": "Infineon Cypress Semicon NOR FLASH, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "memory",
    "s25fl256sagmfig03",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "s25fl256sagmfig03.kicad_sym",
    "s25fl256sagmfig03.kicad_mod",
    "s25fl256sagmfig03.glb",
    "s25fl256sagmfig03.step",
    "s25fl256sagmfig03.lbr",
    "docs/hero.png",
    "docs/s25fl256sagmfig03-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "s25fl256sagmfig03-hero.glb",
    "s25fl256sagmfig03-hero.overlay.json",
    "s25fl256sagmfig03-etched.glb"
  ],
  "component": {
    "mpn": "S25FL256SAGMFIG03",
    "manufacturer": "Infineon Cypress Semicon",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Memory",
    "subcategory": "NOR FLASH",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588907901524594688",
    "parts": {
      "symbol": "s25fl256sagmfig03.kicad_sym",
      "footprint": "s25fl256sagmfig03.kicad_mod",
      "model_3d": "s25fl256sagmfig03-hero.glb",
      "model_3d_plain": "s25fl256sagmfig03-etched.glb",
      "model_3d_step": "s25fl256sagmfig03-etched.step",
      "model_3d_step_plain": "s25fl256sagmfig03.step",
      "lbr": "s25fl256sagmfig03.lbr"
    },
    "distributor_links": {
      "lcsc": "C914931"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T16:42:45Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "HOLD#/IO3",
        "type": "bidirectional",
        "description": "Hold input in single/dual SPI mode and IO3 data line in Quad I/O mode."
      },
      {
        "number": "2",
        "name": "VCC",
        "type": "power_in",
        "description": "Core supply voltage, 2.7V to 3.6V."
      },
      {
        "number": "3",
        "name": "RESET#",
        "type": "input",
        "description": "Hardware reset input; model G (SO footprint with RESET#) bonds this connector to the device RESET# signal."
      },
      {
        "number": "4",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use; leave unconnected."
      },
      {
        "number": "5",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use; leave unconnected."
      },
      {
        "number": "6",
        "name": "RFU",
        "type": "unconnected",
        "description": "Reserved for future use; leave unconnected."
      },
      {
        "number": "7",
        "name": "CS#",
        "type": "input",
        "description": "Chip select input that enables the device and frames SPI commands."
      },
      {
        "number": "8",
        "name": "SO/IO1",
        "type": "bidirectional",
        "description": "Serial data output in single SPI mode and IO1 in dual/quad modes."
      },
      {
        "number": "9",
        "name": "WP#/IO2",
        "type": "bidirectional",
        "description": "Write protect input in single/dual mode and IO2 data line in Quad I/O mode."
      },
      {
        "number": "10",
        "name": "VSS",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "11",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use; leave unconnected."
      },
      {
        "number": "12",
        "name": "DNU",
        "type": "unconnected",
        "description": "Do not use; leave unconnected."
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "14",
        "name": "VIO/RFU",
        "type": "unconnected",
        "description": "In model G the I/O supply is bonded to VCC within the package, so this connector is left unconnected (RFU)."
      },
      {
        "number": "15",
        "name": "SI/IO0",
        "type": "bidirectional",
        "description": "Serial data input in single SPI mode and IO0 in dual/quad modes."
      },
      {
        "number": "16",
        "name": "SCK",
        "type": "input",
        "description": "Serial clock input; SPI clock modes 0 and 3 are supported."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Model number G (S25FL256SAGMFIG03: 'G = EHPLC, SO footprint with RESET#') means pin 3 is RESET# and ; Signal descriptions (Table 2) were not in the supplied pages, so descriptions of the SPI signals are",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 21,
        "cost_usd": 0.4078,
        "at": "2026-10-18T16:42:29"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588907901524594688",
        "pages": 147,
        "sha256": "397c9c5f636021b6",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "s25fl256sagmfig03.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "s25fl256sagmfig03-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "82316dc6379e46b50a1bce20bb711c0e8c8dbb3034210bfc30d4f149dcc994a7",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}