component
S1206-S-1.5A
Public Made by Adomby adom
SART Nanjing Sart Tech Disposable Fuses, 1206. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 21d ago |
| viewers | 21d ago |
| package.json | 21d ago |
| page.json | 21d ago |
| README.md | 21d ago |
| s1206-s-1-5a-etched.glb | 21d ago |
| s1206-s-1-5a-etched.step | 21d ago |
| s1206-s-1-5a-hero.glb | 21d ago |
| s1206-s-1-5a-hero.overlay.json | 21d ago |
| s1206-s-1-5a.glb | 21d ago |
| s1206-s-1-5a.kicad_mod | 21d ago |
| s1206-s-1-5a.kicad_sym | 21d ago |
| s1206-s-1-5a.lbr | 21d ago |
| s1206-s-1-5a.step | 21d ago |
S1206-S-1.5A
SART Nanjing Sart Tech · Disposable Fuses · 1206
S1206-S-1.5A from SART Nanjing Sart Tech, in a 1206. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Fuse terminal 1 (silver/tin-plated end termination, non-polarized, 1.5 A slow blow, 32 V rating) on a 3.10 mm × 1.55 mm body. |
| 2 | 2 | passive | Fuse terminal 2 (silver/tin-plated end termination, non-polarized, 1.5 A slow blow, 32 V rating) on a 3.10 mm × 1.55 mm body. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SART Nanjing Sart Tech |
| Package | 1206 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature | -55 | 125 | ℃ | 1 | |||
| Opening time at 100% of current rating | 4 | hours | 100% of current rating, no fusing (printed as >4 hours) | 4 | |||
| Opening time at 200% of current rating | 60 | sec | 200% of current rating; 1.0A~7.0A | 4 | |||
| Opening time at 1000% of current rating | 1 | ms | 1000% of current rating; 1.0A~7.0A | 4 | |||
| Voltage drop deviation between mean values | 15 | % | 100% of current rating; IEC60127-4 | 4 | |||
| Temperature rise | △T | 75 | ℃ | 100% of current rating; IEC60127-4 | 4 | ||
| Endurance resistance change | /△R/ | 10 | % | 100 cycles of 1In for 1h ON, 15min OFF, then 1h of 125%In | 4 | ||
| Solderability wetting coverage | 95 | % | 240℃±5℃, 3sec±0.5sec | 4 | |||
| Resistance to soldering resistance change | /△R/ | 10 | % | 260℃±5℃, 10sec±0.5sec | 4 | ||
| Bending test resistance change | /△R/ | 10 | % | Distance between holding points 90mm; bending 1mm, time 10sec | 4 | ||
| High temperature operating life resistance change | /△R/ | 10 | % | T=70℃±2℃, 60%In, 96hours | 4 | ||
| Humidity steady state resistance change | /△R/ | 10 | % | T=40℃±2℃, 90%～95%RH, 1000hours | 4 | ||
| Low temperature storage resistance change | /△R/ | 10 | % | T=-55℃±3℃, 96hours | 4 | ||
| High temperature storage resistance change | /△R/ | 10 | % | T=125℃±2℃, 96hours | 4 | ||
| Salt spray resistance change | /△R/ | 10 | % | 5% salt solution, 48hours | 4 | ||
| Thermal shock resistance change | /△R/ | 10 | % | 100 cycles between -65℃/+125℃, 60 minutes each extreme | 4 | ||
| Storage ambient temperature | 5 | 30 | ℃ | Recommended storage ambient | 6 | ||
| Storage relative humidity | 25 | 60 | %RH | Recommended storage | 6 | ||
| Infrared reflow temperature | 260 | ℃ | Infrared reflow, recommended reflow profile | 5 | |||
| Infrared reflow time | 5 | sec | Infrared reflow, at 260℃ | 5 | |||
| Wave soldering reservoir temperature | 260 | ℃ | Wave soldering reservoir | 5 | |||
| Wave soldering time in reservoir | 10 | sec | Wave soldering, time in reservoir | 5 | |||
| Hand soldering temperature | 350 | ℃ | Hand soldering | 5 | |||
| Hand soldering time | 5 | sec | Hand soldering | 5 | |||
| Rated current | 1.5 | A | 1 | ||||
| Rated voltage | 32 | V | DC | 1 | |||
| Interrupting rating | 50 | A | 0.5A~3.5A, 32V DC; without permanent arcing, ignition and bursting of fuse link | 4 | |||
| Typical cold DCR | 140 | mΩ | Measured at ≤10% rated current and 25℃ | 1 | |||
| Typical melting I2t | I2T | 0.4137 | A2s | Melting I2T at 10 times of rated current | 1 |
CAD (KiCad official)
- Symbol:
S1206-S-1.5A - Footprint:
Fuse:Fuse_1206_3216Metric - 3D model: 1206 (KiCad packages3D, STEP)
- 3D model files:
s1206-s-1-5a-etched.step/s1206-s-1-5a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s1206-s-1-5a.step/s1206-s-1-5a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SART Nanjing Sart Tech datasheet (6 pp, sha256
45bfdfb4e1b73b54, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).