main
Ray
Publish 0.1.0
58ca662
S10CMHM3
Vishay General Semiconductor - Diodes Division · Discrete Semiconductor Products · DO-214AB, SMC
S10CMHM3 from Vishay General Semiconductor - Diodes Division, in a DO-214AB, SMC. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode terminal, identified by the color band on the SMC (DO-214AB) package; the S10CM is rated for 1000 V VRRM and 10 A IF(AV). |
| 2 | A | passive | Anode terminal at the end of the SMC (DO-214AB) package opposite the cathode band; the S10CM is rated for 1000 V VRRM and 300 A peak forward surge current IFSM. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay General Semiconductor - Diodes Division |
| Package | DO-214AB, SMC |
| Category | Discrete Semiconductor Products |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum repetitive peak reverse voltage | VRRM | 1000 | V | 1 | |||
| Maximum RMS voltage | VRMS | 700 | V | 1 | |||
| Maximum DC blocking voltage | VDC | 1000 | V | 1 | |||
| Maximum average forward rectified current | IF(AV) | 10 | A | Mounted on aluminum PCB 30 mm x 30 mm with aluminum heatsink (note 1) | 1 | ||
| Maximum average forward rectified current | IF(AV) | 2 | A | Free air, mounted on recommended copper pad area (note 2) | 1 | ||
| Peak forward surge current | IFSM | 300 | A | 8.3 ms single half sine-wave superimposed on rated load | 1 | ||
| Operating junction and storage temperature range | TJ, TSTG | -55 | 150 | °C | 1 | ||
| Instantaneous forward voltage | VF | 0.96 | 1 | V | IF = 10.0 A, TA = 25 °C; pulse test 300 μs pulse width, 1 % duty cycle | 2 | |
| Instantaneous forward voltage | VF | 0.87 | 0.95 | V | IF = 10.0 A, TA = 125 °C; pulse test 300 μs pulse width, 1 % duty cycle | 2 | |
| Instantaneous forward voltage | VF | 0.9 | V | IF = 5.0 A, TA = 25 °C; pulse test 300 μs pulse width, 1 % duty cycle | 2 | ||
| Instantaneous forward voltage | VF | 0.8 | V | IF = 5.0 A, TA = 125 °C; pulse test 300 μs pulse width, 1 % duty cycle | 2 | ||
| Reverse current | IR | 10 | μA | Rated VR, TA = 25 °C; pulse test 300 μs pulse width, 1 % duty cycle | 2 | ||
| Reverse current | IR | 350 | μA | Rated VR, TA = 125 °C; pulse test 300 μs pulse width, 1 % duty cycle | 2 | ||
| Typical reverse recovery time | trr | 5 | μs | IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A | 2 | ||
| Typical junction capacitance | CJ | 79 | pF | 4.0 V, 1 MHz | 2 | ||
| Typical thermal resistance junction to ambient | RθJA | 75 | °C/W | Free air, mounted on recommended PCB, 2 oz. pad area (note 1) | 2 | ||
| Typical thermal resistance junction to mount | RθJM | 9.3 | °C/W | Mounted on 30 mm x 30 mm aluminum PCB (note 2) | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 | 1 |
CAD (Adom-generated)
- Symbol:
S10CMHM3 - Footprint:
Adom_Gen:Vishay_General_Semiconductor_-_Diodes_Division_S10_f16e21 - 3D model: generated to fit the land (STEP)
- 3D model files:
s10cmhm3-i-etched.step/s10cmhm3-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s10cmhm3-i.step/s10cmhm3-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Vishay General Semiconductor - Diodes Division datasheet (4 pp, sha256
b11cb40afe03d923, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
# S10CMHM3
**Vishay General Semiconductor - Diodes Division** · Discrete Semiconductor Products · DO-214AB, SMC
S10CMHM3 from Vishay General Semiconductor - Diodes Division, in a DO-214AB, SMC. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | K | passive | Cathode terminal, identified by the color band on the SMC (DO-214AB) package; the S10CM is rated for 1000 V VRRM and 10 A IF(AV). |
| 2 | A | passive | Anode terminal at the end of the SMC (DO-214AB) package opposite the cathode band; the S10CM is rated for 1000 V VRRM and 300 A peak forward surge current IFSM. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Vishay General Semiconductor - Diodes Division |
| Package | DO-214AB, SMC |
| Category | Discrete Semiconductor Products |
| Pins | 2 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Maximum repetitive peak reverse voltage | VRRM | | | 1000 | V | | 1 |
| Maximum RMS voltage | VRMS | | | 700 | V | | 1 |
| Maximum DC blocking voltage | VDC | | | 1000 | V | | 1 |
| Maximum average forward rectified current | IF(AV) | | | 10 | A | Mounted on aluminum PCB 30 mm x 30 mm with aluminum heatsink (note 1) | 1 |
| Maximum average forward rectified current | IF(AV) | | | 2 | A | Free air, mounted on recommended copper pad area (note 2) | 1 |
| Peak forward surge current | IFSM | | | 300 | A | 8.3 ms single half sine-wave superimposed on rated load | 1 |
| Operating junction and storage temperature range | TJ, TSTG | -55 | | 150 | °C | | 1 |
| Instantaneous forward voltage | VF | | 0.96 | 1 | V | IF = 10.0 A, TA = 25 °C; pulse test 300 μs pulse width, 1 % duty cycle | 2 |
| Instantaneous forward voltage | VF | | 0.87 | 0.95 | V | IF = 10.0 A, TA = 125 °C; pulse test 300 μs pulse width, 1 % duty cycle | 2 |
| Instantaneous forward voltage | VF | | 0.9 | | V | IF = 5.0 A, TA = 25 °C; pulse test 300 μs pulse width, 1 % duty cycle | 2 |
| Instantaneous forward voltage | VF | | 0.8 | | V | IF = 5.0 A, TA = 125 °C; pulse test 300 μs pulse width, 1 % duty cycle | 2 |
| Reverse current | IR | | | 10 | μA | Rated VR, TA = 25 °C; pulse test 300 μs pulse width, 1 % duty cycle | 2 |
| Reverse current | IR | | | 350 | μA | Rated VR, TA = 125 °C; pulse test 300 μs pulse width, 1 % duty cycle | 2 |
| Typical reverse recovery time | trr | | 5 | | μs | IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A | 2 |
| Typical junction capacitance | CJ | | 79 | | pF | 4.0 V, 1 MHz | 2 |
| Typical thermal resistance junction to ambient | RθJA | | 75 | | °C/W | Free air, mounted on recommended PCB, 2 oz. pad area (note 1) | 2 |
| Typical thermal resistance junction to mount | RθJM | | 9.3 | | °C/W | Mounted on 30 mm x 30 mm aluminum PCB (note 2) | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 | 1 |
## CAD (Adom-generated)
- Symbol: `S10CMHM3`
- Footprint: `Adom_Gen:Vishay_General_Semiconductor_-_Diodes_Division_S10_f16e21`
- 3D model: generated to fit the land (STEP)
- 3D model files: `s10cmhm3-i-etched.step` / `s10cmhm3-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `s10cmhm3-i.step` / `s10cmhm3-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Vishay General Semiconductor - Diodes Division datasheet](https://www.vishay.com/docs/87608/s10cgjkm.pdf) (4 pp, sha256 `b11cb40afe03d923`, retrieved 2026-11-20)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land.
[Datasheet PDF](docs/s10cmhm3-i-datasheet.pdf)