component
S0603-F-1.5A
Public Made by Adomby adom
SART Nanjing Sart Tech Disposable Fuses, 0603. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownS0603-F-1.5A
SART Nanjing Sart Tech · Disposable Fuses · 0603
S0603-F-1.5A from SART Nanjing Sart Tech, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised fuse; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised fuse; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SART Nanjing Sart Tech |
| Package | 0603 |
| Category | Circuit Protection |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Opening time at 100% of rated current (no fusing) | 4 | hours | 100% of current rating, no fusing | 3 | |||
| Opening time at 250% of rated current | 5 | sec | 250% of current rating; 1.0A~6.0A range | 3 | |||
| Opening time at 1000% of rated current | 0.1 | ms | 1000% of current rating | 3 | |||
| Interrupting rating | 50 | A | 32 V DC; 0.5A~3.5A range; without permanent arcing, ignition or bursting (UL248-14, IEC60127-4) | 1 | |||
| Voltage rating | 32 | V | DC | 1 | |||
| Temperature rise | ΔT | 75 | ℃ | 100% of current rating; UL248-14 | 4 | ||
| Voltage drop deviation from mean value | 15 | % | 100% of current rating; IEC60127-4 | 4 | |||
| Endurance test resistance change | /ΔR/ | 10 | % | 100 cycles of 1In for 1h ON / 15min OFF, then 1h at 125%In; IEC60127-4 | 4 | ||
| Resistance to soldering resistance change | /ΔR/ | 10 | % | 260℃±5℃, 10sec±0.5sec; MIL-STD-202 Method 210 | 4 | ||
| Bending test resistance change | /ΔR/ | 10 | % | Distance between holding points 90mm; bending 1mm, time 10s | 4 | ||
| High temperature operating life resistance change | /ΔR/ | 10 | % | T=70℃±2℃, 60%In, 96 hours; no fusing; MIL-STD-202 Method 108 | 4 | ||
| Humidity (steady state) resistance change | /ΔR/ | 10 | % | T=40℃±2℃, 90%~95%RH, 1000 hours; MIL-STD-202 Method 103 | 4 | ||
| Low temperature storage resistance change | /ΔR/ | 10 | % | T=-55℃±3℃, 96 hours; IEC60068-2-1 | 4 | ||
| High temperature storage resistance change | /ΔR/ | 10 | % | T=125℃±2℃, 96 hours; IEC60068-2-2 | 4 | ||
| Salt spray resistance change | /ΔR/ | 10 | % | 5% salt solution, 48 hours; MIL-STD-202 Method 101 | 4 | ||
| Thermal shock resistance change | /ΔR/ | 10 | % | 100 cycles between -65℃/+125℃, 60 minutes each extreme; MIL-STD-202 Method 107 | 4 | ||
| Solderability terminal coverage | 95 | % | 240℃±5℃, 3sec±0.5sec; IEC60127-4; MIL-STD-202 Method 208 | 4 | |||
| Operating temperature range | -55 | 125 | ℃ | 1 | |||
| Recommended storage temperature | 5 | 30 | ℃ | Ambient storage | 6 | ||
| Recommended storage relative humidity | 25 | 60 | %RH | Storage | 6 | ||
| Rated current | In | 1.5 | A | 1 | |||
| Typical cold DCR | 85 | mΩ | Measured at ≤10% rated current and 25℃ | 1 | |||
| Typical melting I²T | I²T | 0.0473 | A2s | Melting I²T at 10 times rated current | 1 |
CAD (KiCad official)
- Symbol:
S0603-F-1.5A - Footprint:
Fuse:Fuse_0603_1608Metric - 3D model: 0603 (KiCad packages3D, STEP)
- 3D model files:
s0603-f-1-5a-etched.step/s0603-f-1-5a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s0603-f-1-5a.step/s0603-f-1-5a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SART Nanjing Sart Tech datasheet (6 pp, sha256
327d0da943575adc, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).