Generated by kicad-footprint-generator · KiCad file format 20260206
S-35390A-J8T1G
ABLIC · Real-Time Clocks (RTC) · SOIC-8
S-35390A-J8T1G from ABLIC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INT1 | output | Interrupt signal 1 output (Nch open-drain, no protective diode at VDD) that outputs alarm 1 interrupt, user-set frequency, minute-periodical interrupt 1/2 or 32.768 kHz selected via status register 2. |
| 2 | XOUT | passive | Quartz crystal connection pin; connect the 32.768 kHz crystal between XIN and XOUT (internal Cd = 8 pF typ. on XOUT). |
| 3 | XIN | passive | Quartz crystal connection pin; connect the crystal between XIN and XOUT, with external Cg (up to 9.1 pF) applied to XIN. |
| 4 | VSS | power_in | Ground pin; connect to GND (0 V). |
| 5 | INT2 | output | Interrupt signal 2 output (Nch open-drain, no protective diode at VDD) that outputs alarm 2 interrupt, user-set frequency or minute-periodical interrupt 1 selected via status register 2. |
| 6 | SCL | input | Serial clock input for the I2C-bus interface (CMOS input, no protective diode at VDD). |
| 7 | SDA | bidirectional | Serial data I/O for the I2C-bus interface (CMOS input, Nch open-drain output, no protective diode at VDD); pull up to VDD via a resistor. |
| 8 | VDD | power_in | Positive power supply pin; operating range 1.3 V to 5.5 V (absolute maximum VSS+6.5 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ABLIC |
| Package | SOIC-8 |
| Category | RTC/Clock Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage (abs max) | VDD | -0.3 | 6.5 | V | VSS reference | 6 | |
| Input voltage (abs max) | VIN | -0.3 | 6.5 | V | SCL, SDA | 6 | |
| Output voltage (abs max) | VOUT | -0.3 | 6.5 | V | SDA, INT1, INT2 | 6 | |
| Operating ambient temperature | Topr | -40 | 85 | C | No condensation or frost | 6 | |
| Storage temperature | Tstg | -55 | 125 | C | 6 | ||
| Power supply voltage | VDD | 1.3 | 3 | 5.5 | V | Ta = -40C to 85C | 6 |
| Time keeping power supply voltage | VDDT | 5.5 | V | Ta = -40C to 85C; min is VDET + 0.15 per characteristics | 6 | ||
| Quartz crystal CL value | CL | 6 | 7 | pF | 6 | ||
| Oscillation start voltage | VSTA | 1.1 | 5.5 | V | Within 10 seconds, Ta = 25C, VDD = 3.0 V | 6 | |
| Oscillation start time | tSTA | 1 | s | Ta = 25C, VDD = 3.0 V | 6 | ||
| IC-to-IC frequency deviation | ΔIC | -10 | 10 | ppm | Reference value | 6 | |
| Frequency voltage deviation | ΔV | -3 | 3 | ppm/V | VDD = 1.3 V to 5.5 V | 6 | |
| External capacitance | Cg | 9.1 | pF | Applied to XIN pin | 6 | ||
| Internal oscillation capacitance | Cd | 8 | pF | Applied to XOUT pin | 6 | ||
| Current consumption 1 (VDD=3.0V) | IDD1 | 0.25 | 0.93 | uA | Out of communication, VDD = 3.0 V | 7 | |
| Current consumption 2 (VDD=3.0V) | IDD2 | 6 | 14 | uA | During communication (SCL = 100 kHz), VDD = 3.0 V | 7 | |
| Input current leakage 1 (VDD=3.0V) | IIZH | -0.5 | 0.5 | uA | VIN = VDD, SCL, SDA, VDD = 3.0 V | 7 | |
| Input current leakage 2 (VDD=3.0V) | IIZL | -0.5 | 0.5 | uA | VIN = VSS, SCL, SDA, VDD = 3.0 V | 7 | |
| Output current leakage 1 (VDD=3.0V) | IOZH | -0.5 | 0.5 | uA | VOUT = VDD, SDA, INT1, INT2, VDD = 3.0 V | 7 | |
| Output current leakage 2 (VDD=3.0V) | IOZL | -0.5 | 0.5 | uA | VOUT = VSS, SDA, INT1, INT2, VDD = 3.0 V | 7 | |
| Input voltage 1 (VDD=3.0V) | VIH | 5.5 | V | SCL, SDA, VDD = 3.0 V; min 0.8 x VDD | 7 | ||
| Input voltage 2 (VDD=3.0V) | VIL | -0.3 | V | SCL, SDA, VDD = 3.0 V; max 0.2 x VDD | 7 | ||
| Output current 1 (VDD=3.0V) | IOL1 | 3 | 5 | mA | VOUT = 0.4 V, INT1, INT2, VDD = 3.0 V | 7 | |
| Output current 2 (VDD=3.0V) | IOL2 | 5 | 10 | mA | VOUT = 0.4 V, SDA, VDD = 3.0 V | 7 | |
| Power supply voltage detection voltage (VDD=3.0V) | VDET | 0.65 | 1 | 1.35 | V | VDD = 3.0 V table | 7 |
| Current consumption 1 (VDD=5.0V) | IDD1 | 0.3 | 1.1 | uA | Out of communication, VDD = 5.0 V | 7 | |
| Current consumption 2 (VDD=5.0V) | IDD2 | 14 | 30 | uA | During communication (SCL = 100 kHz), VDD = 5.0 V | 7 | |
| Input current leakage 1 (VDD=5.0V) | IIZH | -0.5 | 0.5 | uA | VIN = VDD, SCL, SDA, VDD = 5.0 V | 7 | |
| Input current leakage 2 (VDD=5.0V) | IIZL | -0.5 | 0.5 | uA | VIN = VSS, SCL, SDA, VDD = 5.0 V | 7 | |
| Output current leakage 1 (VDD=5.0V) | IOZH | -0.5 | 0.5 | uA | VOUT = VDD, SDA, INT1, INT2, VDD = 5.0 V | 7 | |
| Output current leakage 2 (VDD=5.0V) | IOZL | -0.5 | 0.5 | uA | VOUT = VSS, SDA, INT1, INT2, VDD = 5.0 V | 7 | |
| Input voltage 1 (VDD=5.0V) | VIH | 5.5 | V | SCL, SDA, VDD = 5.0 V; min 0.8 x VDD | 7 | ||
| Input voltage 2 (VDD=5.0V) | VIL | -0.3 | V | SCL, SDA, VDD = 5.0 V; max 0.2 x VDD | 7 | ||
| Output current 1 (VDD=5.0V) | IOL1 | 5 | 8 | mA | VOUT = 0.4 V, INT1, INT2, VDD = 5.0 V | 7 | |
| Output current 2 (VDD=5.0V) | IOL2 | 6 | 13 | mA | VOUT = 0.4 V, SDA, VDD = 5.0 V | 7 | |
| Power supply voltage detection voltage (VDD=5.0V) | VDET | 0.65 | 1 | 1.35 | V | VDD = 5.0 V table | 7 |
| SCL clock frequency (VDD>=1.3V) | fSCL | 0 | 100 | kHz | VDD >= 1.3 V, Ta = -40C to 85C | 8 | |
| SCL clock frequency (VDD>=3.0V) | fSCL | 0 | 400 | kHz | VDD >= 3.0 V, Ta = -40C to 85C | 8 | |
| SCL clock low time (VDD>=1.3V) | tLOW | 4.7 | us | VDD >= 1.3 V | 8 | ||
| SCL clock low time (VDD>=3.0V) | tLOW | 1.3 | us | VDD >= 3.0 V | 8 | ||
| SCL clock high time (VDD>=1.3V) | tHIGH | 4 | us | VDD >= 1.3 V | 8 | ||
| SCL clock high time (VDD>=3.0V) | tHIGH | 0.6 | us | VDD >= 3.0 V | 8 | ||
| SDA output delay time (VDD>=1.3V) | tPD | 3.5 | us | VDD >= 1.3 V; reference value | 8 | ||
| SDA output delay time (VDD>=3.0V) | tPD | 0.9 | us | VDD >= 3.0 V; reference value | 8 | ||
| Start condition setup time (VDD>=1.3V) | tSU.STA | 4.7 | us | VDD >= 1.3 V | 8 | ||
| Start condition setup time (VDD>=3.0V) | tSU.STA | 0.6 | us | VDD >= 3.0 V | 8 | ||
| Start condition hold time (VDD>=1.3V) | tHD.STA | 4 | us | VDD >= 1.3 V | 8 | ||
| Start condition hold time (VDD>=3.0V) | tHD.STA | 0.6 | us | VDD >= 3.0 V | 8 | ||
| Data input setup time (VDD>=1.3V) | tSU.DAT | 250 | ns | VDD >= 1.3 V | 8 | ||
| Data input setup time (VDD>=3.0V) | tSU.DAT | 100 | ns | VDD >= 3.0 V | 8 | ||
| Data input hold time | tHD.DAT | 0 | us | Both VDD columns | 8 | ||
| Stop condition setup time (VDD>=1.3V) | tSU.STO | 4.7 | us | VDD >= 1.3 V | 8 | ||
| Stop condition setup time (VDD>=3.0V) | tSU.STO | 0.6 | us | VDD >= 3.0 V | 8 | ||
| SCL, SDA rise time (VDD>=1.3V) | tR | 1 | us | VDD >= 1.3 V | 8 | ||
| SCL, SDA rise time (VDD>=3.0V) | tR | 0.3 | us | VDD >= 3.0 V | 8 | ||
| SCL, SDA fall time | tF | 0.3 | us | Both VDD columns | 8 | ||
| Bus release time (VDD>=1.3V) | tBUF | 4.7 | us | VDD >= 1.3 V | 8 | ||
| Bus release time (VDD>=3.0V) | tBUF | 1.3 | us | VDD >= 3.0 V | 8 | ||
| Noise suppression time (VDD>=1.3V) | tI | 100 | ns | VDD >= 1.3 V | 8 | ||
| Noise suppression time (VDD>=3.0V) | tI | 50 | ns | VDD >= 3.0 V | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Lead-free, Sn 100%, halogen-free*1 *1. Refer to " Product Name Structure" for details. | 1 |
CAD (KiCad official)
- Symbol:
S-35390A-J8T1G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
s-35390a-j8t1g-etched.step/s-35390a-j8t1g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s-35390a-j8t1g.step/s-35390a-j8t1g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ABLIC datasheet (57 pp, sha256
4a8654978deb6f09, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).