← Commit history
s-1167b18-m5t1u: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+56−1
page.json+56−1@@ -33,5 +33,60 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "S-1167B18-M5T1U",+ "manufacturer": "ABLIC",+ "package": "SOT-23-5",+ "pin_count": 5,+ "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "parts": {+ "symbol": "s-1167b18-m5t1u.kicad_sym",+ "footprint": "s-1167b18-m5t1u.kicad_mod",+ "model_3d": "s-1167b18-m5t1u-etched.glb",+ "model_3d_plain": "s-1167b18-m5t1u.glb",+ "model_3d_step": "s-1167b18-m5t1u-etched.step",+ "model_3d_step_plain": "s-1167b18-m5t1u.step",+ "lbr": "s-1167b18-m5t1u.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VIN",+ "type": "power_in",+ "description": "Input voltage pin. Operating range 2.0 V to 6.5 V (absolute max VSS − 0.3 V to VSS + 7 V). Bypass with a 1.0 µF or greater ceramic capacitor (CIN) to VSS placed as close as possible to this pin."+ },+ {+ "number": "2",+ "name": "VSS",+ "type": "power_in",+ "description": "Ground (GND) reference pin. Common return for input and output capacitors; wiring impedance to this pin should be minimized."+ },+ {+ "number": "3",+ "name": "ON/OFF",+ "type": "input",+ "description": "Regulator enable pin. B-type (positive logic): 'H' (VSH ≥ 1.5 V) = ON, 'L' (VSL ≤ 0.3 V) = OFF. Input current|ISH|,|ISL|≤ 0.1 µA at VIN = 6.5 V. Not internally pulled up or down - must not be left floating; when unused on the B-type, tie to VIN."+ },+ {+ "number": "4",+ "name": "NC",+ "type": "unconnected",+ "description": "No connection. Pin is electrically open inside the package; may be left floating or tied to VIN or VSS per the datasheet note."+ },+ {+ "number": "5",+ "name": "VOUT",+ "type": "power_out",+ "description": "Regulated output voltage pin. Fixed 1.8 V ±1.0% for S-1167B18; output current up to 150 mA (VIN ≥ VOUT(S) + 1.0 V). Requires a ≥1.0 µF output capacitor (CL) to VSS with ESR ≤ 1.0 Ω for phase compensation/stability. Do not allow VOUT to exceed VIN + 0.3 V (parasitic diode)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}