main
History Download
Ray ry8326: laser-etched CAD + chip hero (factory 2.0.0 backfill) 9f55bef

RY8326

RYCHIP · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOP-8

RY8326 from RYCHIP, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BS passive Bootstrap pin. A capacitor connected between SW and BS is required to form a floating supply across the high-side switch driver. VBS rating: (Vsw-0.3V) to (Vsw+5V).
2 IN power_in Power supply input pin. Operating input voltage range 4V to 30V (absolute max 36V). Bypass with ceramic capacitor placed close to this pin.
3 SW power_out Switching node pin. Connects to the drain of the internal high-side MOSFET and source of the low-side MOSFET; drive the external inductor from here. VSW rating: -0.3V to (VIN+0.5V).
4 GND power_in Ground pin. Tie to system ground plane along with the exposed pad.
5 FB input Adjustable version feedback input. Connect FB to the center point of an external resistor divider from VOUT to GND. Regulated to VFB = 0.923V (typ), VOUT = VFB × (R1+R2)/R2. Absolute max -0.3V to 6V.
6 NC unconnected No internal connection. Leave floating or tie to a copper pour as required by layout.
7 EN input Enable input. Drive logic-high to enable the IC; drive logic-low to disable and enter micro-power shutdown (IQ_SD ≈ 4µA). Absolute max -0.3V to 36V.
8 NC unconnected No internal connection. Leave floating or tie to a copper pour as required by layout.
9 EP power_in Exposed thermal pad. Ground connection; solder to a large copper area on the PCB to improve thermal performance and long-term reliability.

Key specifications

Parameter Value
Manufacturer RYCHIP
Package SOP-8
Category PMIC
Pins 9

CAD (KiCad official)

  • Symbol: RY8326
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ry8326-etched.step / ry8326-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ry8326.step / ry8326.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RYCHIP datasheet (7 pp, sha256 4637077c837aa8a1, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF