component
RY6212-15M5R
Public Made by Adomby adom
RYCHIP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
RY6212-15M5R
RYCHIP · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
RY6212-15M5R from RYCHIP, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin for the regulator. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable control (active high): driving EN over 1V turns on the regulator, and driving EN below 0.5V puts the regulator into shutdown mode. |
| 4 | NC | unconnected | Not connected. |
| 5 | OUT | power_out | Output voltage pin for the regulator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RYCHIP |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Tolerance | -2 | 2 | % | 1 | |||
| Line Regulation | 0.2 | 0.6 | %/V | (VOUT(S)+1V) ≤ VIN ≤ 5.5V, IOUT=1mA | 9 | ||
| Load Regulation | 0.5 | 2 | % | VIN=VOUT(S)+1.0 V, IOUT = 1mA to 350mA | 9 | ||
| Power Supply Rejection Ratio | PSRR | 60 | dB | VOUT=2.5V, IOUT=20 mA, f = 10kHz | 9 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 8 | ||
| Operating temperature range | TA | -40 | 85 | °C | 8 | ||
| Input voltage | VIN | 2 | 5.5 | V | 8 | ||
| Output current | IOUT | 0 | 350 | mA | 8 | ||
| VIN voltage | VIN | 2 | 6 | V | 8 | ||
| VOUT voltage | VOUT | 1 | 5 | V | 8 | ||
| Operating ambient temperature | TA | -40 | 85 | °C | 8 | ||
| Maximum junction temperature | TJ(MAX) | 150 | °C | 8 | |||
| Storage temperature | Tstg | -50 | 85 | °C | 8 | ||
| Lead temperature (soldering, 10 sec.) | 260 | °C | Soldering, 10 sec. | 8 | |||
| Quiescent current | ISS1 | 28 | μA | VIN=VOUT(S)+1.0 V | 9 | ||
| Power Supply Rejection Ratio | PSRR | 70 | dB | VOUT=2.5V, IOUT=20 mA, f = 1KHz | 9 | ||
| Junction-to-ambient thermal resistance | RθJA | 195 | °C/W | SOT23-5; simulated on 4-layer JEDEC board per JESD 51-7 | 8 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 102 | °C/W | SOT23-5 | 8 | ||
| Junction-to-board thermal resistance | RθJB | 46 | °C/W | SOT23-5 | 8 | ||
| Junction-to-top characterization parameter | ψJT | 8.5 | °C/W | SOT23-5 | 8 | ||
| Junction-to-board characterization parameter | ψJB | 45 | °C/W | SOT23-5 | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 2. The ground connections for CIN and COUT must be back to the IC’s GND pin using as wide and short a copper | 13 |
CAD (KiCad official)
- Symbol:
RY6212-15M5R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ry6212-15m5r-etched.step/ry6212-15m5r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ry6212-15m5r.step/ry6212-15m5r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RYCHIP datasheet (16 pp, sha256
13074da744257beb, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RY6212-15M5R
**RYCHIP** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
RY6212-15M5R from RYCHIP, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin for the regulator. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable control (active high): driving EN over 1V turns on the regulator, and driving EN below 0.5V puts the regulator into shutdown mode. |
| 4 | NC | unconnected | Not connected. |
| 5 | OUT | power_out | Output voltage pin for the regulator. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RYCHIP |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Tolerance | | -2 | | 2 | % | | 1 |
| Line Regulation | | | 0.2 | 0.6 | %/V | (VOUT(S)+1V) ≤ VIN ≤ 5.5V, IOUT=1mA | 9 |
| Load Regulation | | | 0.5 | 2 | % | VIN=VOUT(S)+1.0 V, IOUT = 1mA to 350mA | 9 |
| Power Supply Rejection Ratio | PSRR | 60 | | | dB | VOUT=2.5V, IOUT=20 mA, f = 10kHz | 9 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 8 |
| Operating temperature range | TA | -40 | | 85 | °C | | 8 |
| Input voltage | VIN | 2 | | 5.5 | V | | 8 |
| Output current | IOUT | 0 | | 350 | mA | | 8 |
| VIN voltage | VIN | 2 | | 6 | V | | 8 |
| VOUT voltage | VOUT | 1 | | 5 | V | | 8 |
| Operating ambient temperature | TA | -40 | | 85 | °C | | 8 |
| Maximum junction temperature | TJ(MAX) | | | 150 | °C | | 8 |
| Storage temperature | Tstg | -50 | | 85 | °C | | 8 |
| Lead temperature (soldering, 10 sec.) | | | | 260 | °C | Soldering, 10 sec. | 8 |
| Quiescent current | ISS1 | | 28 | | μA | VIN=VOUT(S)+1.0 V | 9 |
| Power Supply Rejection Ratio | PSRR | | 70 | | dB | VOUT=2.5V, IOUT=20 mA, f = 1KHz | 9 |
| Junction-to-ambient thermal resistance | RθJA | | 195 | | °C/W | SOT23-5; simulated on 4-layer JEDEC board per JESD 51-7 | 8 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 102 | | °C/W | SOT23-5 | 8 |
| Junction-to-board thermal resistance | RθJB | | 46 | | °C/W | SOT23-5 | 8 |
| Junction-to-top characterization parameter | ψJT | | 8.5 | | °C/W | SOT23-5 | 8 |
| Junction-to-board characterization parameter | ψJB | | 45 | | °C/W | SOT23-5 | 8 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | 2. The ground connections for CIN and COUT must be back to the IC’s GND pin using as wide and short a copper | 13 |
## CAD (KiCad official)
- Symbol: `RY6212-15M5R`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `ry6212-15m5r-etched.step` / `ry6212-15m5r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ry6212-15m5r.step` / `ry6212-15m5r.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RYCHIP datasheet](docs/ry6212-15m5r-datasheet.pdf) (16 pp, sha256 `13074da744257beb`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ry6212-15m5r-datasheet.pdf)