component
RY6050-33M5R
Public Made by Adomby adom
RYCHIP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
RY6050-33M5R
RYCHIP · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
RY6050-33M5R from RYCHIP, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin for the regulator; the datasheet specifies an input voltage range of 2 V to 5.5 V. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable control (active high): driving EN above 0.9 V turns on the regulator, and driving EN below 0.4 V puts it into shutdown mode. |
| 4 | NC | unconnected | Not connected. |
| 5 | OUT | power_out | Output voltage pin for the regulator. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RYCHIP |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN voltage | VIN | 2 | 6 | V | 7 | ||
| VOUT voltage | VOUT | 1 | 5 | V | 7 | ||
| Output Current | 500 | mA | 7 | ||||
| Operating Ambient Temperature | -40 | 85 | °C | 7 | |||
| Maximum junction temperature | 150 | °C | 7 | ||||
| Storage temperature | Tstg | -50 | 85 | °C | 7 | ||
| Lead Temperature (Soldering, 10sec.) | 260 | °C | Soldering, 10 sec | 7 | |||
| Operating junction temperature | -40 | 125 | °C | 8 | |||
| Operating temperature range | -40 | 85 | °C | 8 | |||
| Input voltage | VIN | 2 | 5.5 | V | 8 | ||
| Output current | 0 | 500 | mA | 8 | |||
| Input Voltage | VIN | 2 | 5.5 | V | 9 | ||
| Output Voltage Tolerance | -2 | 2 | % | 1 | |||
| Line Regulation | ΔVOUT/(ΔVIN×VOUT) | 0.2 | 0.6 | %/V | VOUT(S)+0.5 V≤VIN≤7V, IOUT=300mA | 9 | |
| Load Regulation | ΔVOUT/VOUT | 0.5 | 2 | % | VIN=VOUT(S)+1.0 V | 9 | |
| Power Supply Rejection Ratio | PSRR | 60 | dB | VOUT=2.5V, IOUT=20mA, f = 10kHz | 9 | ||
| Short-Circuit Current Limit | ISC | 500 | mA | 9 | |||
| Input Current at EN pin | IEN | -0.1 | 0.1 | μA | VIN=VEN=VOUT(T)+1V | 9 | |
| Output Current | IOUT | 500 | mA | VIN≥VOUT(S)+1.0V | 9 | ||
| Supply current | ISS1 | 28 | μA | VIN=VOUT(S)+1.0 V | 9 | ||
| Shutdown Current | ISD | 0.1 | μA | VEN=0.3V (Disable) | 9 | ||
| Power Supply Rejection Ratio | PSRR | 70 | dB | VOUT=2.5V, IOUT=20mA, f = 1KHz | 9 | ||
| High Input Threshold | VENH | 0.9 | V | VEN rising until the output is enabled | 9 | ||
| Low Input Threshold | VENL | 0.4 | V | VEN falling until the output is disabled | 9 | ||
| Dropout Voltage | Vdrop | 60 | mV | -40°C≤TJ≤125°C, VOUT=0.98VOUT(NOM), 3.3V, IOUT=100mA | 9 | ||
| Dropout Voltage | Vdrop | 230 | mV | -40°C≤TJ≤125°C, VOUT=0.98VOUT(NOM), 3.3V, IOUT=300mA | 9 | ||
| Thermal Shutdown Temperature | TSD | 155 | °C | TJ rising | 9 | ||
| Thermal Shutdown Hysteresis | ΔTSD | 15 | °C | TJ falling from shutdown | 9 | ||
| Junction-to-ambient thermal resistance | RθJA | 195 | °C/W | SOT23 5 Pin, JESD 51-7, 4-layer JEDEC board | 8 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 102 | °C/W | SOT23 5 Pin | 8 | ||
| Junction-to-board thermal resistance | RθJB | 46 | °C/W | SOT23 5 Pin | 8 | ||
| Junction-to-top characterization parameter | ψJT | 8.5 | °C/W | SOT23 5 Pin | 8 | ||
| Junction-to-board characterization parameter | ψJB | 45 | °C/W | SOT23 5 Pin | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 2. The ground connections for CIN and COUT must be back to the IC’s GND pin using as wide and short a copper | 11 |
CAD (KiCad official)
- Symbol:
RY6050-33M5R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ry6050-33m5r-etched.step/ry6050-33m5r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ry6050-33m5r.step/ry6050-33m5r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RYCHIP datasheet (14 pp, sha256
944e1f94321fbbb9, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RY6050-33M5R
**RYCHIP** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
RY6050-33M5R from RYCHIP, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin for the regulator; the datasheet specifies an input voltage range of 2 V to 5.5 V. |
| 2 | GND | power_in | Ground pin. |
| 3 | EN | input | Enable control (active high): driving EN above 0.9 V turns on the regulator, and driving EN below 0.4 V puts it into shutdown mode. |
| 4 | NC | unconnected | Not connected. |
| 5 | OUT | power_out | Output voltage pin for the regulator. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RYCHIP |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN voltage | VIN | 2 | | 6 | V | | 7 |
| VOUT voltage | VOUT | 1 | | 5 | V | | 7 |
| Output Current | | | | 500 | mA | | 7 |
| Operating Ambient Temperature | | -40 | | 85 | °C | | 7 |
| Maximum junction temperature | | | | 150 | °C | | 7 |
| Storage temperature | Tstg | -50 | | 85 | °C | | 7 |
| Lead Temperature (Soldering, 10sec.) | | | | 260 | °C | Soldering, 10 sec | 7 |
| Operating junction temperature | | -40 | | 125 | °C | | 8 |
| Operating temperature range | | -40 | | 85 | °C | | 8 |
| Input voltage | VIN | 2 | | 5.5 | V | | 8 |
| Output current | | 0 | | 500 | mA | | 8 |
| Input Voltage | VIN | 2 | | 5.5 | V | | 9 |
| Output Voltage Tolerance | | -2 | | 2 | % | | 1 |
| Line Regulation | ΔVOUT/(ΔVIN×VOUT) | | 0.2 | 0.6 | %/V | VOUT(S)+0.5 V≤VIN≤7V, IOUT=300mA | 9 |
| Load Regulation | ΔVOUT/VOUT | | 0.5 | 2 | % | VIN=VOUT(S)+1.0 V | 9 |
| Power Supply Rejection Ratio | PSRR | 60 | | | dB | VOUT=2.5V, IOUT=20mA, f = 10kHz | 9 |
| Short-Circuit Current Limit | ISC | 500 | | | mA | | 9 |
| Input Current at EN pin | IEN | -0.1 | | 0.1 | μA | VIN=VEN=VOUT(T)+1V | 9 |
| Output Current | IOUT | | 500 | | mA | VIN≥VOUT(S)+1.0V | 9 |
| Supply current | ISS1 | | 28 | | μA | VIN=VOUT(S)+1.0 V | 9 |
| Shutdown Current | ISD | | 0.1 | | μA | VEN=0.3V (Disable) | 9 |
| Power Supply Rejection Ratio | PSRR | | 70 | | dB | VOUT=2.5V, IOUT=20mA, f = 1KHz | 9 |
| High Input Threshold | VENH | | 0.9 | | V | VEN rising until the output is enabled | 9 |
| Low Input Threshold | VENL | | 0.4 | | V | VEN falling until the output is disabled | 9 |
| Dropout Voltage | Vdrop | | 60 | | mV | -40°C≤TJ≤125°C, VOUT=0.98VOUT(NOM), 3.3V, IOUT=100mA | 9 |
| Dropout Voltage | Vdrop | | 230 | | mV | -40°C≤TJ≤125°C, VOUT=0.98VOUT(NOM), 3.3V, IOUT=300mA | 9 |
| Thermal Shutdown Temperature | TSD | | 155 | | °C | TJ rising | 9 |
| Thermal Shutdown Hysteresis | ΔTSD | | 15 | | °C | TJ falling from shutdown | 9 |
| Junction-to-ambient thermal resistance | RθJA | | 195 | | °C/W | SOT23 5 Pin, JESD 51-7, 4-layer JEDEC board | 8 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 102 | | °C/W | SOT23 5 Pin | 8 |
| Junction-to-board thermal resistance | RθJB | | 46 | | °C/W | SOT23 5 Pin | 8 |
| Junction-to-top characterization parameter | ψJT | | 8.5 | | °C/W | SOT23 5 Pin | 8 |
| Junction-to-board characterization parameter | ψJB | | 45 | | °C/W | SOT23 5 Pin | 8 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | 2. The ground connections for CIN and COUT must be back to the IC’s GND pin using as wide and short a copper | 11 |
## CAD (KiCad official)
- Symbol: `RY6050-33M5R`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `ry6050-33m5r-etched.step` / `ry6050-33m5r-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ry6050-33m5r.step` / `ry6050-33m5r.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RYCHIP datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8610941450515464192) (14 pp, sha256 `944e1f94321fbbb9`, retrieved 2026-10-17, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ry6050-33m5r-datasheet.pdf)