main
History Download
Ray ry4064at5: laser-etched CAD + chip hero (factory 2.0.0 backfill) cc888a5

RY4064AT5

RYCHIP · Battery Management · SOT-23-5

RY4064AT5 from RYCHIP, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CHRG output Open-drain charge status output pin. Strong pull-down (~10 mA sink capability) during an active charge cycle to drive an LED; weak pull-down (~20 µA) when charging has terminated with valid VCC; high impedance in UVLO. Absolute maximum voltage 10 V.
2 GND power_in Device ground return. Connect directly to the system ground plane for proper thermal dissipation of the internal power MOSFET.
3 BAT power_out Charge current output pin. Connects to the positive terminal of the single-cell Li-Ion battery; regulated to 4.2 V float voltage in constant-voltage mode. Absolute maximum voltage 7 V; typical charge current up to 500 mA.
4 VCC power_in Positive input supply voltage pin (from USB or wall adapter). Recommended operating range 4.25 V to 30 V; 6.4 V typical over-voltage protection threshold; absolute maximum 32 V. UVLO threshold ~3.8 V with ~200 mV hysteresis.
5 PROG bidirectional Charge current program, charge current monitor, and shutdown pin. Connect a resistor RPROG to GND to program charge current (ICHG = 1000 V / RPROG); voltage on this pin mirrors 1/1000 of the BAT current for monitoring. Floating the pin (or forcing >~1.21 V) places the device into shutdown mode.

Key specifications

Parameter Value
Manufacturer RYCHIP
Package SOT-23-5
Category PMIC
Pins 5

Ordering variants

Same part, different packaging or reel option.

  • RY4064AT5
  • RY4064AT570705101
  • RY4064AT6
  • RY4064AT570705102

CAD (KiCad official)

  • Symbol: RY4064AT5
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: ry4064at5-etched.step / ry4064at5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ry4064at5.step / ry4064at5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RYCHIP datasheet (14 pp, sha256 e85580ca8a494614, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF