main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ry3715: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ry3715: viewers · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
README.md ry3715: specified limits as data (metadata.characteristics, 27 rows from the datasheet) · Ray
ry3715-etched.fit.json ry3715: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ry3715-etched.glb ry3715: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ry3715-etched.step ry3715: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ry3715-hero.glb ry3715: hero from the plain model · Ray
ry3715-hero.overlay.json ry3715: hero from the plain model · Ray
ry3715.glb Publish 0.1.0 · Ray
ry3715.kicad_mod Publish 0.1.0 · Ray
ry3715.kicad_sym Publish 0.1.0 · Ray
ry3715.lbr Publish 0.1.0 · Ray
ry3715.step Publish 0.1.0 · Ray

RY3715

RYCHIP · DC-DC Converters · SOT-23-6

RY3715 from RYCHIP, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW power_out Power switch output. Drain of the internal 20V, 60mΩ NMOS power MOSFET. Connect the power inductor and Schottky output rectifier here. Absolute maximum SW voltage is 19V.
2 GND power_in Device ground return. Reference for all analog and power circuitry; tie directly to the ground plane at the input and output capacitors.
3 FB input Feedback input to the error amplifier. Regulated to VFB = 0.6V (typ, 588-612mV). Connect the top of an external resistor divider from VOUT to FB to set the output voltage: VOUT = VFB × (R1+R2)/R2.
4 EN input Regulator on/off control input. Drive high (rising threshold ≥1.2V) to enable the converter, low (falling threshold ≤0.8V) to shut it down (<1µA quiescent). Tie to IN for automatic startup when unused.
5 IN power_in Input supply pin. Operating range 2.3V to 5.5V (absolute maximum 6V). Bypass with a low-ESR ceramic capacitor (≥1µF, 22µF/25V ceramic typical) placed close to the pin.
6 NC unconnected No internal connection. Leave floating or tie to a static net; do not use as a signal via.

Key specifications

Parameter Value
Manufacturer RYCHIP
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • RY3715

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage range 2.3 5.5 V 4
Output voltage range 18 V 4
Supply Current (Quiescent) 150 200 µA VFB =110% 4
Supply Current (Shutdown) 0.1 1 µA VEN =0 or EN = GND 4
Feedback Voltage 588 600 612 mV 4
SW On Resistance 60 120 mΩ 4
Under-Voltage Lockout Threshold, Wake up VIN Voltage 2 2.2 V 4
Under-Voltage Lockout Threshold, Shutdown VIN Voltage 1.6 1.8 V 4
VIN EN voltage -0.3 6 V 3
SW voltage -0.3 19 V 3
All Other Pins voltage -0.3 6 V 3
Operating junction temperature TJ -40 150 °C 3
Storage temperature Tstg -65 150 °C 3
Lead Temperature (Soldering) 260 °C Soldering, 10 sec 3
ESD Human Body Model V(ESD-HBM) -2000 2000 V ANSI/ESDA/JEDEC JS-001-2014, Class 2 3
ESD Charged Device Model V(ESD-CDM) -200 200 V ANSI/ESDA/JEDEC JS-002-2014, Class C0b 3
Latch-up current ILATCH-UP -150 150 mA JEDEC STANDARD NO.78E, Class I 3
Operating junction temperature -40 125 °C 3
Operating temperature range -40 85 °C 3
Input voltage VIN 2.3 5.5 V 3
Output voltage VOUT 18 V 3
Typical Output Current IOUT 0 1 A 3
Junction-to-ambient thermal resistance RθJA 105 °C/W JESD 51-7, 4-layer JEDEC board 4
Junction-to-case (top) thermal resistance RθJC(top) 55 °C/W 4
Junction-to-board thermal resistance RθJB 17.5 °C/W 4
Junction-to-top characterization parameter ψJT 3.5 °C/W 4
Junction-to-board characterization parameter ψJB 17.5 °C/W 4

CAD (KiCad official)

  • Symbol: RY3715
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ry3715-etched.step / ry3715-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ry3715.step / ry3715.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
ry3715.step 97 KB You want the bare part, or you mark your own boards.
ry3715-etched.step 1.3 MB You want the part with RY3715 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 321 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RYCHIP datasheet (11 pp, sha256 7bf9672b3d3fc634, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF