← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "SW", "type": "power_out",- "description": "Power switch output; drain of the internal 80m\u03a9 NMOS power switch (4A typical current limit, absolute max 10V). Connect the boost inductor and Schottky output rectifier here."+ "description": "Power switch output; drain of the internal 80mΩ NMOS power switch (4A typical current limit, absolute max 10V). Connect the boost inductor and Schottky output rectifier here." }, { "number": "2",@@ -44,19 +44,19 @@ "number": "3", "name": "FB", "type": "input",- "description": "Feedback input to the error amplifier, regulated to VFB = 0.6V (588-612mV). Set VOUT with a resistor divider: VOUT = 0.6V \u00d7 (R1+R2)/R2. Input bias current is roughly -10nA (-50nA max) at VFB=0.6V."+ "description": "Feedback input to the error amplifier, regulated to VFB = 0.6V (588-612mV). Set VOUT with a resistor divider: VOUT = 0.6V × (R1+R2)/R2. Input bias current is roughly -10nA (-50nA max) at VFB=0.6V." }, { "number": "4", "name": "EN", "type": "input",- "description": "Regulator on/off control input. Logic-high (threshold ~1V, absolute max 6V) enables the converter; logic-low shuts it down (IIN \u2264 1\u00b5A). Tie to VIN for automatic start-up; do not leave floating."+ "description": "Regulator on/off control input. Logic-high (threshold ~1V, absolute max 6V) enables the converter; logic-low shuts it down (IIN ≤ 1µA). Tie to VIN for automatic start-up; do not leave floating." }, { "number": "5", "name": "IN", "type": "power_in",- "description": "Input supply pin, 2.5V to 5.5V (absolute max 6V). Bypass locally with a low-ESR ceramic capacitor (22\u00b5F typical) placed as close as possible to the pin."+ "description": "Input supply pin, 2.5V to 5.5V (absolute max 6V). Bypass locally with a low-ESR ceramic capacitor (22µF typical) placed as close as possible to the pin." }, { "number": "6",@@ -126,5 +126,8 @@ "docs/ry3708-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }