RVT1J101M1010

{
 "schema": "adom/verification@1",
 "part": "RVT1J101M1010",
 "variants": [],
 "entries": [
  {
   "date": "2026-10-16",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Automated build checks (awaiting human validation)",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)",
     "result": "pass"
    },
    {
     "text": "3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)",
     "result": "pass"
    },
    {
     "text": "adom-lbr generate + lint passed",
     "result": "pass"
    },
    {
     "text": "2 of 2 pins described",
     "result": "pass"
    },
    {
     "text": "Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing",
     "result": "note"
    }
   ],
   "evidence": [
    {
     "label": "datasheet",
     "href": "docs/rvt1j101m1010-datasheet.pdf"
    }
   ],
   "files": {
    "rvt1j101m1010.kicad_sym": "928b6cd5313e49d81c92701a75ae08157ba71f9a6963a72f00285110225a71cc",
    "rvt1j101m1010.kicad_mod": "157fd0d37afa1602b8debca5f7d1745125f7f7dcbf3aef471cfdcfdd4ceb91ff",
    "rvt1j101m1010.step": "866051839e3e1f725ea48390ac881121e55ce86e5ba54077cf13470e18135884"
   }
  },
  {
   "date": "2026-10-16",
   "by": {
    "name": "Claude (AI build)",
    "handle": "claude"
   },
   "status": "superseded",
   "title": "Datasheet (Honor Elec RVT series, via LCSC) is an image-only scan with Chinese labels; no ...",
   "scope": [
    "review"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Datasheet (Honor Elec RVT series, via LCSC) is an image-only scan with Chinese labels; no text layer, so values cannot be text-checked.",
     "result": "note"
    }
   ],
   "evidence": [],
   "files": {}
  },
  {
   "date": "2026-10-27",
   "by": {
    "name": "Claude, at Caleb Taylor's request",
    "handle": "claude"
   },
   "status": "verified",
   "title": "Validated against the Honor Elec (HONORCAP) RVT series specification",
   "scope": [
    "symbol",
    "footprint",
    "3d",
    "pins"
   ],
   "variants": [
    "*"
   ],
   "checks": [
    {
     "text": "Datasheet: HONORCAP (Dongguan Honor Electronics) RVT series chip aluminum electrolytic capacitor specification (\"RVT系列规格书.pdf\", 5 pages, no revision printed, PDF created 2021-12-06), downloaded 2026-10-27 from the maker's own site, honorcap.com (http://www.honorcap.com/media/download/7574619e0c8abc5a6360ba2f614dcc86); replaces the JLCPCB/LCSC scan. The PDF is drawn without a text layer, so it was read from rendered pages",
     "result": "pass"
    },
    {
     "text": "Part number decoded with \"Explanation of Part Number\" (p.4): RVT series, 1J = 63 V, 101 = 100 uF, M = +/-20%, 1010 = 10 x 10.2. Standard size table (p.3): 63 V 100 uF = 10 x 10.2, 200 mA. Specifications (p.1): -55 to +105 C, 2000 h at 105 C, +/-20%. The README distributor summary row says the same",
     "result": "pass"
    },
    {
     "text": "Polarity: Fig. 1 (p.2) bottom view marks the Positive terminal on the chamfered-corner side of the seat plate and the Negative terminal on the square side. The footprint (CP_Elec_10x10.5) draws its chamfered outline and + mark on the pad 1 side (x < 0); a section of the plain STEP just above the board shows the chamfered seat plate on the pad 1 side (plate half-width 4.55 at x = -4.8 vs 5.15 at x = +4.8); the symbol is Device:C_Polarized with + on pin 1. Pin 1 = pad 1 = +, pin 2 = pad 2 = -",
     "result": "pass"
    },
    {
     "text": "Pin names stay empty (two-terminal passive convention); pins 1 and 2 described from Fig. 1 (p.2), replacing the \"[from symbol]\" descriptions; types passive",
     "result": "pass"
    },
    {
     "text": "Footprint (KiCad CP_Elec_10x10.5): pads at +/-4.2 mm, 4.4 x 2.5 mm, gap 4.0, outer span 12.8. The datasheet gives no land pattern; for D 10 (p.2) the terminals are H 0.8-1.1 wide, E 4.5 apart and reach at most 0.5 beyond the 11.1 mm seat plate, so the pads (2.0 to 6.4 mm from centre, 2.5 wide) cover them",
     "result": "note"
    },
    {
     "text": "Plain STEP 12.0 x 10.3 x 10.5 mm against D 10 (p.2): seat plate B 10.3+/-0.2, height L 10.2+/-0.5 (10.5 inside), terminal span up to A 11.1+/-0.2 plus 2 x 0.5 max.; Z-up, seated on z = 0, centred on the pads. The models_3d records in page.json carry looser extents (13.47 x 13.656 x 10.5) than the STEP's own bounding box",
     "result": "pass"
    },
    {
     "text": "DigiKey and Mouser do not list RVT1J101M1010 (search by exact MPN, 2026-10-27); set to not carried",
     "result": "pass"
    },
    {
     "text": "Symbol and footprint Datasheet properties point at the manufacturer datasheet URL",
     "result": "pass"
    },
    {
     "text": "Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL",
     "result": "pass"
    },
    {
     "text": "component-page-verify: all checks pass",
     "result": "pass"
    }
   ],
   "evidence": [
    {
     "label": "datasheet (Honor Elec)",
     "href": "http://www.honorcap.com/media/download/7574619e0c8abc5a6360ba2f614dcc86"
    }
   ],
   "files": {
    "rvt1j101m1010.kicad_sym": "334479b921eee2f5bded082550a4d70e79181dddfd1ae9830a41dc3aa489170a",
    "rvt1j101m1010.kicad_mod": "8fa5ffda6232918da1914b231a47fafe3365a624227718104f6d34583755ee00",
    "rvt1j101m1010.step": "866051839e3e1f725ea48390ac881121e55ce86e5ba54077cf13470e18135884"
   }
  }
 ]
}