component

RVT1J101M1010

Public Made by Adom

by adom

Honor Elec Aluminum Electrolytic Capacitors, SMD,D10xL10.2mm. KiCad symbol, footprint and 3D as used on Adom boards.

componentcapacitorsrvt1j101m1010board-derived

Verified RVT1J101M1010

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against the Honor Elec (HONORCAP) RVT series specificationfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: HONORCAP (Dongguan Honor Electronics) RVT series chip aluminum electrolytic capacitor specification ("RVT系列规格书.pdf", 5 pages, no revision printed, PDF created 2021-12-06), downloaded 2026-10-27 from the maker's own site, honorcap.com (http://www.honorcap.com/media/download/7574619e0c8abc5a6360ba2f614dcc86); replaces the JLCPCB/LCSC scan. The PDF is drawn without a text layer, so it was read from rendered pages
  • ✓Part number decoded with "Explanation of Part Number" (p.4): RVT series, 1J = 63 V, 101 = 100 uF, M = +/-20%, 1010 = 10 x 10.2. Standard size table (p.3): 63 V 100 uF = 10 x 10.2, 200 mA. Specifications (p.1): -55 to +105 C, 2000 h at 105 C, +/-20%. The README distributor summary row says the same
  • ✓Polarity: Fig. 1 (p.2) bottom view marks the Positive terminal on the chamfered-corner side of the seat plate and the Negative terminal on the square side. The footprint (CP_Elec_10x10.5) draws its chamfered outline and + mark on the pad 1 side (x < 0); a section of the plain STEP just above the board shows the chamfered seat plate on the pad 1 side (plate half-width 4.55 at x = -4.8 vs 5.15 at x = +4.8); the symbol is Device:C_Polarized with + on pin 1. Pin 1 = pad 1 = +, pin 2 = pad 2 = -
  • ✓Pin names stay empty (two-terminal passive convention); pins 1 and 2 described from Fig. 1 (p.2), replacing the "[from symbol]" descriptions; types passive
  • •Footprint (KiCad CP_Elec_10x10.5): pads at +/-4.2 mm, 4.4 x 2.5 mm, gap 4.0, outer span 12.8. The datasheet gives no land pattern; for D 10 (p.2) the terminals are H 0.8-1.1 wide, E 4.5 apart and reach at most 0.5 beyond the 11.1 mm seat plate, so the pads (2.0 to 6.4 mm from centre, 2.5 wide) cover them
  • ✓Plain STEP 12.0 x 10.3 x 10.5 mm against D 10 (p.2): seat plate B 10.3+/-0.2, height L 10.2+/-0.5 (10.5 inside), terminal span up to A 11.1+/-0.2 plus 2 x 0.5 max.; Z-up, seated on z = 0, centred on the pads. The models_3d records in page.json carry looser extents (13.47 x 13.656 x 10.5) than the STEP's own bounding box
  • ✓DigiKey and Mouser do not list RVT1J101M1010 (search by exact MPN, 2026-10-27); set to not carried
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Honor Elec)
Verified files✓ rvt1j101m1010.kicad_sym✓ rvt1j101m1010.kicad_mod✓ rvt1j101m1010.step
16 Oct 2026Claude (AI build)Datasheet (Honor Elec RVT series, via LCSC) is an image-only scan with Chinese labels; no ...superseded
reviewfor all variants
  • •Datasheet (Honor Elec RVT series, via LCSC) is an image-only scan with Chinese labels; no text layer, so values cannot be text-checked.
16 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓2 of 2 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! rvt1j101m1010.kicad_sym! rvt1j101m1010.kicad_mod✓ rvt1j101m1010.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
rvt1j101m1010 / rvt1j101m1010.kicad_mod
HistoryDownload
Caleb Publish 0.1.2 6a14e3e 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358
(footprint "RVT1J101M1010"
	(layer "F.Cu")
	(descr "SMD capacitor, aluminum electrolytic, Vishay 1010, 10.0x10.5mm, http://www.vishay.com/docs/28395/150crz.pdf"
	)
	(tags "capacitor electrolytic")
	(property "Reference" "REF**"
		(at 0 -6.3 180)
		(layer "F.SilkS")
		(hide yes)
		(uuid "b92fc2e3-2a2a-4c58-9107-af20b89e90c0")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "Value" "RVT1J101M1010"
		(at 0.199999 0 180)
		(layer "F.Fab")
		(hide yes)
		(uuid "43c145f5-7aed-40cc-b2b5-1a5fd947c527")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "Datasheet" "http://www.honorcap.com/media/download/7574619e0c8abc5a6360ba2f614dcc86"
		(at 0 0 180)
		(layer "F.Fab")
		(hide yes)
		(uuid "17ef6bce-aa4e-4e31-bcef-a6ee12ee520f")
		(effects
			(font (size 1.27 1.27))
		)
	)
	(property "Description" "-55℃~+105℃ 10.2mm 100uF 10mm 2000hrs@105℃ 63V ±20% SMD,D10xL10.2mm Aluminum Electrolytic Capacitor"
		(at 0 0 180)
		(layer "F.Fab")
		(hide yes)
		(uuid "1f21882b-5cc2-4678-854b-6459657f6d7e")
		(effects
			(font (size 1.27 1.27))
		)
	)
	(property "LCSC" "C28241"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "f3a47fe7-0d84-4a0a-8f95-cc9ac55c8b94")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "MFR" "Honor Elec"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "3157af1b-b003-47a2-be97-b051fe72bf79")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property "PN" "RVT1J101M1010"
		(at 0 0)
		(unlocked yes)
		(layer "F.Fab")
		(hide yes)
		(uuid "259ac095-9ddf-4d80-9f03-4ee54e00a77a")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(property ki_fp_filters "CP_*")
	(units
		(unit (name "A") (pins "1" "2"))
	)
	(attr smd)
	(duplicate_pad_numbers_are_jumpers no)
	(fp_line
		(start 5.36 5.36)
		(end 5.36 1.51)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "406befbe-b639-4949-8204-d5e825bdacdf")
	)
	(fp_line
		(start 5.36 -5.36)
		(end 5.36 -1.51)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "044715f1-9f47-43bc-89fa-7f9e7016ffba")
	)
	(fp_line
		(start -4.295563 5.36)
		(end 5.36 5.36)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "e0502dbc-6a33-4e92-a4ff-c41bf4fecbdd")
	)
	(fp_line
		(start -4.295563 -5.36)
		(end 5.36 -5.36)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "e6b90d7e-8429-493f-8d11-5a094d2aad1b")
	)
	(fp_line
		(start -5.36 4.295563)
		(end -4.295563 5.36)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "045775c3-eb39-4582-b049-8bdec105f60f")
	)
	(fp_line
		(start -5.36 4.295563)
		(end -5.36 1.51)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "32605b53-3ec2-4833-9055-efb0dc4bdbac")
	)
	(fp_line
		(start -5.36 -4.295563)
		(end -4.295563 -5.36)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "a3944836-f9c7-41df-a463-3335cc5ffc55")
	)
	(fp_line
		(start -5.36 -4.295563)
		(end -5.36 -1.51)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "b84d8d9a-ca13-460f-a2f6-9dfa915b9a18")
	)
	(fp_line
		(start -6.225 -3.385)
		(end -6.225 -2.135)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "882010d7-d635-417c-83f6-bf448237a32f")
	)
	(fp_line
		(start -6.85 -2.76)
		(end -5.6 -2.76)
		(stroke (width 0.12) (type solid))
		(layer "F.SilkS")
		(uuid "9dcd07ab-5dec-423e-901b-67b8a1822141")
	)
	(fp_line
		(start 6.65 1.5)
		(end 5.5 1.5)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "c4d319ee-f468-411b-9cc4-f091df18d92a")
	)
	(fp_line
		(start 6.65 -1.5)
		(end 6.65 1.5)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "486c20a6-8d04-4b00-a610-1d8de3fe9a3c")
	)
	(fp_line
		(start 5.5 1.5)
		(end 5.5 5.5)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "13effba0-833f-4ec3-8bc1-397173bca28a")
	)
	(fp_line
		(start 5.5 -1.5)
		(end 6.65 -1.5)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "90929d33-4f60-42e8-aa62-85c2c02df654")
	)
	(fp_line
		(start 5.5 -5.5)
		(end 5.5 -1.5)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "a26d1817-dc8a-448d-b2c3-d5d3cd44cb1c")
	)
	(fp_line
		(start -4.35 5.5)
		(end 5.5 5.5)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "dd0ce7aa-c094-4c0c-b107-544fb94c7ce0")
	)
	(fp_line
		(start -4.35 -5.5)
		(end 5.5 -5.5)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "f1819460-f902-4433-9f0e-11366eefebd1")
	)
	(fp_line
		(start -5.5 4.35)
		(end -4.35 5.5)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "5fe00b2e-8481-4afa-93ec-c16d6b3f252a")
	)
	(fp_line
		(start -5.5 1.5)
		(end -5.5 4.35)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "4fa46eb2-0d1c-426c-bf4b-0b56401bb988")
	)
	(fp_line
		(start -5.5 -1.5)
		(end -6.65 -1.5)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "2e1a108a-9be0-47c5-9de4-27ec5ec73204")
	)
	(fp_line
		(start -5.5 -4.35)
		(end -4.35 -5.5)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "5e76fe9c-b971-4ff1-844f-549bb314d57e")
	)
	(fp_line
		(start -5.5 -4.35)
		(end -5.5 -1.5)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "54635011-bacb-4fba-bb0c-54716f16477c")
	)
	(fp_line
		(start -6.65 1.5)
		(end -5.5 1.5)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "827a1694-7b27-494c-aab6-0358dc13d6c1")
	)
	(fp_line
		(start -6.65 -1.5)
		(end -6.65 1.5)
		(stroke (width 0.05) (type solid))
		(layer "F.CrtYd")
		(uuid "9d787f84-a06a-4f3b-8aa7-f10b4edbf294")
	)
	(fp_line
		(start 5.25 -5.25)
		(end 5.25 5.25)
		(stroke (width 0.1) (type solid))
		(layer "F.Fab")
		(uuid "781bf0c7-5b3c-4307-8659-9ac1504c926c")
	)
	(fp_line
		(start -4.058325 -2.2)
		(end -4.058325 -1.2)
		(stroke (width 0.1) (type solid))
		(layer "F.Fab")
		(uuid "b1679b66-d575-4ab0-bbb8-4242d1c34911")
	)
	(fp_line
		(start -4.25 5.25)
		(end 5.25 5.25)
		(stroke (width 0.1) (type solid))
		(layer "F.Fab")
		(uuid "c2e6aeab-4c2e-4f31-b3c4-02657c84e9e3")
	)
	(fp_line
		(start -4.25 -5.25)
		(end 5.25 -5.25)
		(stroke (width 0.1) (type solid))
		(layer "F.Fab")
		(uuid "aa9f951d-d73c-4c6e-93d6-893be03e9bc4")
	)
	(fp_line
		(start -4.558325 -1.7)
		(end -3.558325 -1.7)
		(stroke (width 0.1) (type solid))
		(layer "F.Fab")
		(uuid "03f4ff12-c5d6-4646-881b-d7a97e500b44")
	)
	(fp_line
		(start -5.25 4.25)
		(end -4.25 5.25)
		(stroke (width 0.1) (type solid))
		(layer "F.Fab")
		(uuid "573763cf-4ce8-4c43-a331-a18159dc8742")
	)
	(fp_line
		(start -5.25 -4.25)
		(end -4.25 -5.25)
		(stroke (width 0.1) (type solid))
		(layer "F.Fab")
		(uuid "ade80f3e-3401-4d48-b8eb-d044749e480d")
	)
	(fp_line
		(start -5.25 -4.25)
		(end -5.25 4.25)
		(stroke (width 0.1) (type solid))
		(layer "F.Fab")
		(uuid "65a66b1b-553e-4c1a-82e2-adff3e898d43")
	)
	(fp_circle
		(center 0 0)
		(end 5 0)
		(stroke (width 0.1) (type solid))
		(fill no)
		(layer "F.Fab")
		(uuid "64eb410b-30c0-4bd4-b09b-8ec16a5e323c")
	)
	(fp_text user "${REFERENCE}"
		(at 0 0 180)
		(layer "F.Fab")
		(uuid "fd04cc2a-a683-439d-9a7e-38d345e065c5")
		(effects
			(font (size 1 1) (thickness 0.15))
		)
	)
	(pad "1" smd roundrect
		(at -4.199999 0)
		(size 4.4 2.5)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.1)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(pad "2" smd roundrect
		(at 4.199999 0)
		(size 4.4 2.5)
		(layers "F.Cu" "F.Mask" "F.Paste")
		(roundrect_rratio 0.1)
		(teardrops
			(best_length_ratio 0.5)
			(max_length 1)
			(best_width_ratio 1)
			(max_width 2)
			(curved_edges yes)
			(filter_ratio 0.9)
			(enabled yes)
			(allow_two_segments yes)
			(prefer_zone_connections yes)
		)
	)
	(embedded_fonts no)
	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/CP_Elec_10x10.5.step"
		(offset (xyz 0 0 0))
		(scale (xyz 1 1 1))
		(rotate (xyz 0 0 0))
	)
)