component

RVT1J101M1010

Public Made by Adom

by adom

Honor Elec Aluminum Electrolytic Capacitors, SMD,D10xL10.2mm. KiCad symbol, footprint and 3D as used on Adom boards.

componentcapacitorsrvt1j101m1010board-derived

Verified RVT1J101M1010

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against the Honor Elec (HONORCAP) RVT series specificationfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: HONORCAP (Dongguan Honor Electronics) RVT series chip aluminum electrolytic capacitor specification ("RVT系列规格书.pdf", 5 pages, no revision printed, PDF created 2021-12-06), downloaded 2026-10-27 from the maker's own site, honorcap.com (http://www.honorcap.com/media/download/7574619e0c8abc5a6360ba2f614dcc86); replaces the JLCPCB/LCSC scan. The PDF is drawn without a text layer, so it was read from rendered pages
  • ✓Part number decoded with "Explanation of Part Number" (p.4): RVT series, 1J = 63 V, 101 = 100 uF, M = +/-20%, 1010 = 10 x 10.2. Standard size table (p.3): 63 V 100 uF = 10 x 10.2, 200 mA. Specifications (p.1): -55 to +105 C, 2000 h at 105 C, +/-20%. The README distributor summary row says the same
  • ✓Polarity: Fig. 1 (p.2) bottom view marks the Positive terminal on the chamfered-corner side of the seat plate and the Negative terminal on the square side. The footprint (CP_Elec_10x10.5) draws its chamfered outline and + mark on the pad 1 side (x < 0); a section of the plain STEP just above the board shows the chamfered seat plate on the pad 1 side (plate half-width 4.55 at x = -4.8 vs 5.15 at x = +4.8); the symbol is Device:C_Polarized with + on pin 1. Pin 1 = pad 1 = +, pin 2 = pad 2 = -
  • ✓Pin names stay empty (two-terminal passive convention); pins 1 and 2 described from Fig. 1 (p.2), replacing the "[from symbol]" descriptions; types passive
  • •Footprint (KiCad CP_Elec_10x10.5): pads at +/-4.2 mm, 4.4 x 2.5 mm, gap 4.0, outer span 12.8. The datasheet gives no land pattern; for D 10 (p.2) the terminals are H 0.8-1.1 wide, E 4.5 apart and reach at most 0.5 beyond the 11.1 mm seat plate, so the pads (2.0 to 6.4 mm from centre, 2.5 wide) cover them
  • ✓Plain STEP 12.0 x 10.3 x 10.5 mm against D 10 (p.2): seat plate B 10.3+/-0.2, height L 10.2+/-0.5 (10.5 inside), terminal span up to A 11.1+/-0.2 plus 2 x 0.5 max.; Z-up, seated on z = 0, centred on the pads. The models_3d records in page.json carry looser extents (13.47 x 13.656 x 10.5) than the STEP's own bounding box
  • ✓DigiKey and Mouser do not list RVT1J101M1010 (search by exact MPN, 2026-10-27); set to not carried
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Honor Elec)
Verified files✓ rvt1j101m1010.kicad_sym✓ rvt1j101m1010.kicad_mod✓ rvt1j101m1010.step
16 Oct 2026Claude (AI build)Datasheet (Honor Elec RVT series, via LCSC) is an image-only scan with Chinese labels; no ...superseded
reviewfor all variants
  • •Datasheet (Honor Elec RVT series, via LCSC) is an image-only scan with Chinese labels; no text layer, so values cannot be text-checked.
16 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓2 of 2 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! rvt1j101m1010.kicad_sym! rvt1j101m1010.kicad_mod✓ rvt1j101m1010.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
rvt1j101m1010 / package.json
HistoryDownload
Caleb Publish 0.1.3 2581456 1d ago
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135
{
  "slug": "rvt1j101m1010",
  "version": "0.1.3",
  "type": "component",
  "tags": [
    "component",
    "capacitors",
    "rvt1j101m1010",
    "board-derived"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "verification.json",
    "rvt1j101m1010.kicad_sym",
    "rvt1j101m1010.kicad_mod",
    "rvt1j101m1010-etched.glb",
    "rvt1j101m1010-etched.step",
    "rvt1j101m1010.glb",
    "rvt1j101m1010.step",
    "rvt1j101m1010.lbr",
    "docs/hero.png",
    "docs/rvt1j101m1010-datasheet.pdf",
    "rvt1j101m1010-hero.glb",
    "rvt1j101m1010-hero.overlay.json"
  ],
  "component": {
    "mpn": "RVT1J101M1010",
    "manufacturer": "Honor Elec",
    "package": "SMD,D10xL10.2mm",
    "pin_count": 2,
    "category": "Capacitors",
    "subcategory": "Aluminum Electrolytic Capacitors",
    "datasheet": "http://www.honorcap.com/media/download/7574619e0c8abc5a6360ba2f614dcc86",
    "parts": {
      "symbol": "rvt1j101m1010.kicad_sym",
      "footprint": "rvt1j101m1010.kicad_mod",
      "model_3d": "rvt1j101m1010-hero.glb",
      "model_3d_plain": "rvt1j101m1010-etched.glb",
      "model_3d_step": "rvt1j101m1010-etched.step",
      "model_3d_step_plain": "rvt1j101m1010.step",
      "lbr": "rvt1j101m1010.lbr"
    },
    "distributor_links": {
      "digikey": false,
      "digikey_note": "Not carried: searched RVT1J101M1010 on 2026-10-27.",
      "mouser": false,
      "mouser_note": "Not carried: searched RVT1J101M1010 on 2026-10-27.",
      "lcsc": {
        "part": "C28241",
        "url": "https://www.lcsc.com/product-detail/C28241.html"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "",
        "type": "passive",
        "description": "Positive (+) terminal: the terminal marked Positive in the Fig. 1 bottom view, on the chamfered-corner side of the seat plate. Pad 1 of the footprint (chamfered outline and + mark). [datasheet p.2]"
      },
      {
        "number": "2",
        "name": "",
        "type": "passive",
        "description": "Negative (-) terminal: the terminal marked Negative in the Fig. 1 bottom view, on the square-corner side of the seat plate. [datasheet p.2]"
      }
    ],
    "provenance": {
      "datasheet": {
        "url": "http://www.honorcap.com/media/download/7574619e0c8abc5a6360ba2f614dcc86",
        "pages": 5,
        "sha256": "285ae57abc097a56fae89388feef643b79f8d7c2901d6457de4bc00a5f91ce1b",
        "source_tier": "mfr",
        "retrieved": "2026-10-27",
        "edition": "RVT series specification (product guide), undated; PDF created 2021-12-06"
      },
      "cad": "KiCad official libraries (CC-BY-SA 4.0); footprint and symbol as used on Adom boards",
      "pins": {
        "total": 2,
        "described": 2,
        "cites_pages": false,
        "refuses_to_fabricate": true
      },
      "build": {
        "tool": "board-derived part page builder 0.1: one-off Claude session scripts in Caleb Taylor's container (retired; not the Adom parts factory)",
        "pins": "KiCad symbol from the source board",
        "at": "2026-10-16"
      }
    },
    "models_3d": [
      {
        "file": "rvt1j101m1010.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin",
        "seat": "z = 0 (PCB top surface)",
        "extents_mm": [
          12.0,
          10.3,
          10.5
        ],
        "zmin_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "866051839e3e1f725ea48390ac881121e55ce86e5ba54077cf13470e18135884",
        "checked": "2026-10-16",
        "checked_by": "session-scripts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"
      },
      {
        "file": "rvt1j101m1010-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin",
        "seat": "z = 0 (PCB top surface)",
        "extents_mm": [
          12.0,
          10.3,
          10.502
        ],
        "zmin_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4739c3cde53c683e367503cb5b39dfb5ace5f770cb3342ba4061c7e01727cbbb",
        "checked": "2026-10-16",
        "checked_by": "session-scripts/partstep.py (placement inverse from the source board; centroid-matched to KiCad library models on 59 reference cases)"
      }
    ]
  },
  "description": "Honor Elec Aluminum Electrolytic Capacitors, SMD,D10xL10.2mm. KiCad symbol, footprint and 3D as used on Adom boards."
}