component

RVT1J101M1010

Public Made by Adom

by adom

Honor Elec Aluminum Electrolytic Capacitors, SMD,D10xL10.2mm. KiCad symbol, footprint and 3D as used on Adom boards.

componentcapacitorsrvt1j101m1010board-derived

Verified RVT1J101M1010

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against the Honor Elec (HONORCAP) RVT series specificationfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: HONORCAP (Dongguan Honor Electronics) RVT series chip aluminum electrolytic capacitor specification ("RVT系列规格书.pdf", 5 pages, no revision printed, PDF created 2021-12-06), downloaded 2026-10-27 from the maker's own site, honorcap.com (http://www.honorcap.com/media/download/7574619e0c8abc5a6360ba2f614dcc86); replaces the JLCPCB/LCSC scan. The PDF is drawn without a text layer, so it was read from rendered pages
  • ✓Part number decoded with "Explanation of Part Number" (p.4): RVT series, 1J = 63 V, 101 = 100 uF, M = +/-20%, 1010 = 10 x 10.2. Standard size table (p.3): 63 V 100 uF = 10 x 10.2, 200 mA. Specifications (p.1): -55 to +105 C, 2000 h at 105 C, +/-20%. The README distributor summary row says the same
  • ✓Polarity: Fig. 1 (p.2) bottom view marks the Positive terminal on the chamfered-corner side of the seat plate and the Negative terminal on the square side. The footprint (CP_Elec_10x10.5) draws its chamfered outline and + mark on the pad 1 side (x < 0); a section of the plain STEP just above the board shows the chamfered seat plate on the pad 1 side (plate half-width 4.55 at x = -4.8 vs 5.15 at x = +4.8); the symbol is Device:C_Polarized with + on pin 1. Pin 1 = pad 1 = +, pin 2 = pad 2 = -
  • ✓Pin names stay empty (two-terminal passive convention); pins 1 and 2 described from Fig. 1 (p.2), replacing the "[from symbol]" descriptions; types passive
  • •Footprint (KiCad CP_Elec_10x10.5): pads at +/-4.2 mm, 4.4 x 2.5 mm, gap 4.0, outer span 12.8. The datasheet gives no land pattern; for D 10 (p.2) the terminals are H 0.8-1.1 wide, E 4.5 apart and reach at most 0.5 beyond the 11.1 mm seat plate, so the pads (2.0 to 6.4 mm from centre, 2.5 wide) cover them
  • ✓Plain STEP 12.0 x 10.3 x 10.5 mm against D 10 (p.2): seat plate B 10.3+/-0.2, height L 10.2+/-0.5 (10.5 inside), terminal span up to A 11.1+/-0.2 plus 2 x 0.5 max.; Z-up, seated on z = 0, centred on the pads. The models_3d records in page.json carry looser extents (13.47 x 13.656 x 10.5) than the STEP's own bounding box
  • ✓DigiKey and Mouser do not list RVT1J101M1010 (search by exact MPN, 2026-10-27); set to not carried
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Honor Elec)
Verified files✓ rvt1j101m1010.kicad_sym✓ rvt1j101m1010.kicad_mod✓ rvt1j101m1010.step
16 Oct 2026Claude (AI build)Datasheet (Honor Elec RVT series, via LCSC) is an image-only scan with Chinese labels; no ...superseded
reviewfor all variants
  • •Datasheet (Honor Elec RVT series, via LCSC) is an image-only scan with Chinese labels; no text layer, so values cannot be text-checked.
16 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓2 of 2 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! rvt1j101m1010.kicad_sym! rvt1j101m1010.kicad_mod✓ rvt1j101m1010.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

History of rvt1j101m1010.kicad_sym

3 commits ← Back to file
Publish 0.1.3
Caleb · 2581456 · 1d ago
Publish 0.1.2
Caleb · 6a14e3e · 1d ago
Add component CAD, datasheet and docs (1)
Caleb · d2689d2 · 12d ago