component

RVT1J101M1010

Public Made by Adom

by adom

Honor Elec Aluminum Electrolytic Capacitors, SMD,D10xL10.2mm. KiCad symbol, footprint and 3D as used on Adom boards.

componentcapacitorsrvt1j101m1010board-derived

Verified RVT1J101M1010

by Claude, at Caleb Taylor's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 3 records

27 Oct 2026Claude, at Caleb Taylor's requestValidated against the Honor Elec (HONORCAP) RVT series specificationfiles match
SymbolFootprint3D modelPinsfor all variants
  • ✓Datasheet: HONORCAP (Dongguan Honor Electronics) RVT series chip aluminum electrolytic capacitor specification ("RVT系列规格书.pdf", 5 pages, no revision printed, PDF created 2021-12-06), downloaded 2026-10-27 from the maker's own site, honorcap.com (http://www.honorcap.com/media/download/7574619e0c8abc5a6360ba2f614dcc86); replaces the JLCPCB/LCSC scan. The PDF is drawn without a text layer, so it was read from rendered pages
  • ✓Part number decoded with "Explanation of Part Number" (p.4): RVT series, 1J = 63 V, 101 = 100 uF, M = +/-20%, 1010 = 10 x 10.2. Standard size table (p.3): 63 V 100 uF = 10 x 10.2, 200 mA. Specifications (p.1): -55 to +105 C, 2000 h at 105 C, +/-20%. The README distributor summary row says the same
  • ✓Polarity: Fig. 1 (p.2) bottom view marks the Positive terminal on the chamfered-corner side of the seat plate and the Negative terminal on the square side. The footprint (CP_Elec_10x10.5) draws its chamfered outline and + mark on the pad 1 side (x < 0); a section of the plain STEP just above the board shows the chamfered seat plate on the pad 1 side (plate half-width 4.55 at x = -4.8 vs 5.15 at x = +4.8); the symbol is Device:C_Polarized with + on pin 1. Pin 1 = pad 1 = +, pin 2 = pad 2 = -
  • ✓Pin names stay empty (two-terminal passive convention); pins 1 and 2 described from Fig. 1 (p.2), replacing the "[from symbol]" descriptions; types passive
  • •Footprint (KiCad CP_Elec_10x10.5): pads at +/-4.2 mm, 4.4 x 2.5 mm, gap 4.0, outer span 12.8. The datasheet gives no land pattern; for D 10 (p.2) the terminals are H 0.8-1.1 wide, E 4.5 apart and reach at most 0.5 beyond the 11.1 mm seat plate, so the pads (2.0 to 6.4 mm from centre, 2.5 wide) cover them
  • ✓Plain STEP 12.0 x 10.3 x 10.5 mm against D 10 (p.2): seat plate B 10.3+/-0.2, height L 10.2+/-0.5 (10.5 inside), terminal span up to A 11.1+/-0.2 plus 2 x 0.5 max.; Z-up, seated on z = 0, centred on the pads. The models_3d records in page.json carry looser extents (13.47 x 13.656 x 10.5) than the STEP's own bounding box
  • ✓DigiKey and Mouser do not list RVT1J101M1010 (search by exact MPN, 2026-10-27); set to not carried
  • ✓Symbol and footprint Datasheet properties point at the manufacturer datasheet URL
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass
Evidencedatasheet (Honor Elec)
Verified files✓ rvt1j101m1010.kicad_sym✓ rvt1j101m1010.kicad_mod✓ rvt1j101m1010.step
16 Oct 2026Claude (AI build)Datasheet (Honor Elec RVT series, via LCSC) is an image-only scan with Chinese labels; no ...superseded
reviewfor all variants
  • •Datasheet (Honor Elec RVT series, via LCSC) is an image-only scan with Chinese labels; no text layer, so values cannot be text-checked.
16 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • ✓2 of 2 pins described
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! rvt1j101m1010.kicad_sym! rvt1j101m1010.kicad_mod✓ rvt1j101m1010.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
← Commit history

Add component CAD, datasheet and docs (1)

Caleb ·d2689d2f48 ·12d ago ·parent f63f690
10 files changed +10813−1
README.md+39−1docs/hero.pngrvt1j101m1010-etched.glbrvt1j101m1010-etched.step+8110rvt1j101m1010.glbrvt1j101m1010.kicad_mod+358rvt1j101m1010.kicad_sym+153rvt1j101m1010.lbr+127rvt1j101m1010.step+1945verification.json+81
README.md+39−1
@@ -1,3 +1,41 @@ # RVT1J101M1010 -Honor Elec Aluminum Electrolytic Capacitors, SMD,D10xL10.2mm. KiCad symbol, footprint and 3D as used on Adom boards.+::adom-verified{src="/adom/rvt1j101m1010/render/verification.json"}++**Honor Elec** · Aluminum Electrolytic Capacitors · SMD,D10xL10.2mm++RVT1J101M1010 from Honor Elec, in a SMD,D10xL10.2mm. Symbol, footprint and 3D model are the ones used on Adom board designs (KiCad official libraries). **Staged for validation: see the open items in the verification log above.**++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | - | passive | Positive (+) terminal: pin 1 carries the + mark on the KiCad C_Polarized symbol and is pad 1 of the CP_Elec_10x10.5 footprint. [from symbol] |+| 2 | - | passive | Negative (-) terminal. [from symbol] |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Honor Elec |+| Package | SMD,D10xL10.2mm |+| Category | Capacitors |+| Pins | 2 |+| LCSC | C28241 |+| Distributor summary (LCSC listing, not datasheet) | -55℃~+105℃ 10.2mm 100uF 10mm 2000hrs@105℃ 63V ±20% SMD,D10xL10.2mm Aluminum Electrolytic Capacitors - SMD ROHS |++## CAD++- Symbol: `rvt1j101m1010` (source library `Device:C_Polarized`)+- Footprint: `Capacitor_SMD:CP_Elec_10x10.5`+- 3D model path in footprint: `${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/CP_Elec_10x10.5.step`+- 3D files: `rvt1j101m1010-etched.step` / `rvt1j101m1010-etched.glb` carry the MPN etch as a separate `Adom.LaserEtch` part; `rvt1j101m1010.step` / `rvt1j101m1010.glb` are the bare model.+- EAGLE/Fusion library: `rvt1j101m1010.lbr` (adom-lbr)++## Provenance++- **Datasheet:** [Honor Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757290979353747456) (sha256 `285ae57abc097a56`, retrieved 2026-10-16, tier: lcsc)+- **CAD:** KiCad official libraries (CC-BY-SA 4.0); footprint and symbol as used on Adom boards.+- **Pins:** KiCad symbol from the source board.++[Datasheet PDF](docs/rvt1j101m1010-datasheet.pdf)
docs/hero.pngadded
⋯ 1 unchanged line ⋯
rvt1j101m1010-etched.glbadded
⋯ 1 unchanged line ⋯
rvt1j101m1010-etched.stepadded+8110
@@ -0,0 +1,8110 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-10-16T23:26:05',('Author'),(+    'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+  ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+  'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+  'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('RVT1J101M1010','RVT1J101M1010','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#19),#23);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);+#16 = CARTESIAN_POINT('',(0.,0.,0.));+#17 = DIRECTION('',(0.,0.,1.));+#18 = DIRECTION('',(1.,0.,-0.));+#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);+#20 = CARTESIAN_POINT('',(0.,0.,-3.000000000001E-03));+#21 = DIRECTION('',(0.,0.,1.));+#22 = DIRECTION('',(1.,0.,-0.));+#23 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#24,#25,#26)) REPRESENTATION_CONTEXT('Context #1',+  '3D Context with UNIT and UNCERTAINTY') );+#24 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#25 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#26 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#27 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.E-07),#24,+  'distance_accuracy_value','confusion accuracy');+#28 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#29 = SHAPE_DEFINITION_REPRESENTATION(#30,#36);+#30 = PRODUCT_DEFINITION_SHAPE('','',#31);+#31 = PRODUCT_DEFINITION('design','',#32,#35);+#32 = PRODUCT_DEFINITION_FORMATION('','',#33);+#33 = PRODUCT('CP_Elec_10x105','CP_Elec_10x105','',(#34));+#34 = PRODUCT_CONTEXT('',#2,'mechanical');+#35 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#36 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#37),#3153);+#37 = MANIFOLD_SOLID_BREP('',#38);+#38 = CLOSED_SHELL('',(#39,#197,#257,#348,#582,#708,#947,#1001,#1055,+    #1206,#1357,#1407,#1457,#1627,#1714,#1983,#2010,#2086,#2093,#2120,+    #2127,#2159,#2166,#2198,#2205,#2281,#2418,#2495,#2545,#2595,#2672,+    #2722,#2772,#2799,#2826,#2962,#3080,#3108,#3115,#3122,#3148));+#39 = ADVANCED_FACE('',(#40),#63,.T.);+#40 = FACE_BOUND('',#41,.T.);+#41 = EDGE_LOOP('',(#42,#146,#169,#196));+#42 = ORIENTED_EDGE('',*,*,#43,.T.);+#43 = EDGE_CURVE('',#44,#44,#46,.T.);+#44 = VERTEX_POINT('',#45);+#45 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.352277442495));+#46 = SURFACE_CURVE('',#47,(#62,#96),.PCURVE_S1.);+#47 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#48,#49,#50,#51,#52,#53,#54,+    #55,#56,#57,#58,#59,#60,#61),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,13,13,1),(-31.41592653589,+    6.213111017846E-16,31.415926535898,62.831853071796),.UNSPECIFIED.) +CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,1.,+    1.000000000001,0.999999999997,1.000000000006,0.99999999999,+    1.000000000011,0.99999999999,1.000000000008,0.999999999995,+1.000000000002,0.999999999999,1.,1.)) REPRESENTATION_ITEM('') );+#48 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.352277442495));+#49 = CARTESIAN_POINT('',(-5.000000000003,2.381651773529,2.352277442495)+  );+#50 = CARTESIAN_POINT('',(-3.769083784592,4.818226231738,2.352277442495)+  );+#51 = CARTESIAN_POINT('',(-1.23603057165,6.560480641773,2.352277442495)+  );+#52 = CARTESIAN_POINT('',(2.249772170806,6.828057715712,2.352277442495)+  );+#53 = CARTESIAN_POINT('',(5.261090838749,4.971090302087,2.352277442495)+  );+#54 = CARTESIAN_POINT('',(7.469576757511,2.260332741401,2.352277442495)+  );+#55 = CARTESIAN_POINT('',(7.469576757546,-2.26033274145,2.352277442495)+  );+#56 = CARTESIAN_POINT('',(5.261090838759,-4.971090302,2.352277442495));+#57 = CARTESIAN_POINT('',(2.249772170765,-6.828057715787,2.352277442495)+  );+#58 = CARTESIAN_POINT('',(-1.236030571611,-6.560480641737,2.352277442495+    ));+#59 = CARTESIAN_POINT('',(-3.769083784611,-4.818226231748,2.352277442495+    ));+#60 = CARTESIAN_POINT('',(-4.999999999998,-2.381651773528,2.352277442495+    ));+#61 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.352277442495));+#62 = PCURVE('',#63,#68);+#63 = CYLINDRICAL_SURFACE('',#64,5.);+#64 = AXIS2_PLACEMENT_3D('',#65,#66,#67);+#65 = CARTESIAN_POINT('',(0.,0.,0.65));+#66 = DIRECTION('',(0.,0.,1.));+#67 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#68 = DEFINITIONAL_REPRESENTATION('',(#69),#95);+#69 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#70,#71,#72,#73,#74,#75,#76,#77,+    #78,#79,#80,#81,#82,#83,#84,#85,#86,#87,#88,#89,#90,#91,#92,#93,#94)+  ,.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4)+  ,(6.213111017846E-16,1.427996660723,2.855993321445,4.283989982168,+    5.711986642891,7.139983303613,8.567979964336,9.995976625058,+    11.423973285781,12.851969946504,14.279966607226,15.707963267949,+    17.135959928672,18.563956589394,19.991953250117,21.41994991084,+    22.847946571562,24.275943232285,25.703939893007,27.13193655373,+    28.559933214453,29.987929875175,31.415926535898),+  .QUASI_UNIFORM_KNOTS.);+#70 = CARTESIAN_POINT('',(6.28318530718,1.702277442495));+#71 = CARTESIAN_POINT('',(6.189328461459,1.702277442495));+#72 = CARTESIAN_POINT('',(6.000569517416,1.702277442495));+#73 = CARTESIAN_POINT('',(5.715310708576,1.702277442495));+#74 = CARTESIAN_POINT('',(5.429076399901,1.702277442495));+#75 = CARTESIAN_POINT('',(5.142558136645,1.702277442495));+#76 = CARTESIAN_POINT('',(4.856167280849,1.702277442495));+#77 = CARTESIAN_POINT('',(4.570033461293,1.702277442495));+#78 = CARTESIAN_POINT('',(4.284140690769,1.702277442495));+#79 = CARTESIAN_POINT('',(3.99841915947,1.702277442495));+#80 = CARTESIAN_POINT('',(3.712790418604,1.702277442495));+#81 = CARTESIAN_POINT('',(3.427191456113,1.702277442495));+#82 = CARTESIAN_POINT('',(3.14159265359,1.702277442495));+#83 = CARTESIAN_POINT('',(2.855993851066,1.702277442495));+#84 = CARTESIAN_POINT('',(2.570394888575,1.702277442495));+#85 = CARTESIAN_POINT('',(2.28476614771,1.702277442495));+#86 = CARTESIAN_POINT('',(1.999044616411,1.702277442495));+#87 = CARTESIAN_POINT('',(1.713151845887,1.702277442495));+#88 = CARTESIAN_POINT('',(1.42701802633,1.702277442495));+#89 = CARTESIAN_POINT('',(1.140627170535,1.702277442495));+#90 = CARTESIAN_POINT('',(0.854108907278,1.702277442495));+#91 = CARTESIAN_POINT('',(0.567874598603,1.702277442495));+#92 = CARTESIAN_POINT('',(0.282615789764,1.702277442495));+#93 = CARTESIAN_POINT('',(9.385684572074E-02,1.702277442495));+#94 = CARTESIAN_POINT('',(0.,1.702277442495));+#95 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#96 = PCURVE('',#97,#140);+#97 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,(+    (#98,#99,#100,#101,#102,#103,#104,#105,#106,#107,#108,#109,#110,#111+      )+    ,(#112,#113,#114,#115,#116,#117,#118,#119,#120,#121,#122,#123,#124+      ,#125)+    ,(#126,#127,#128,#129,#130,#131,#132,#133,#134,#135,#136,#137,#138+,#139+    )),.UNSPECIFIED.,.F.,.T.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(1,+    13,13,1),(0.,31.415926535898),(-31.41592653589,6.213111017846E-16,+    31.415926535898,62.831853071796),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE((+    (1.,1.,1.000000000001,0.999999999997,1.000000000006,0.99999999999+      ,1.000000000011,0.99999999999,1.000000000008,0.999999999995+      ,1.000000000002,0.999999999999,1.,1.)+    ,(0.738548945876,0.738548945876,0.738548945877,0.738548945873+      ,0.738548945882,0.738548945867,0.738548945886,0.738548945866+      ,0.738548945883,0.738548945871,0.738548945878,0.738548945875+      ,0.738548945876,0.738548945876)+    ,(1.,1.,1.000000000001,0.999999999997,1.000000000006,0.99999999999+      ,1.000000000011,0.99999999999,1.000000000008,0.999999999995+,1.000000000002,0.999999999999,1.,1.+  ))) REPRESENTATION_ITEM('') SURFACE() );+#98 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.352277442495));+#99 = CARTESIAN_POINT('',(-5.000000000003,2.381651773529,2.352277442495)+  );+#100 = CARTESIAN_POINT('',(-3.769083784592,4.818226231738,2.352277442495+    ));+#101 = CARTESIAN_POINT('',(-1.23603057165,6.560480641773,2.352277442495)+  );+#102 = CARTESIAN_POINT('',(2.249772170806,6.828057715712,2.352277442495)+  );+#103 = CARTESIAN_POINT('',(5.261090838749,4.971090302087,2.352277442495)+  );+#104 = CARTESIAN_POINT('',(7.469576757511,2.260332741401,2.352277442495)+  );+#105 = CARTESIAN_POINT('',(7.469576757546,-2.26033274145,2.352277442495)+  );+#106 = CARTESIAN_POINT('',(5.261090838759,-4.971090302,2.352277442495));+#107 = CARTESIAN_POINT('',(2.249772170765,-6.828057715787,2.352277442495+    ));+#108 = CARTESIAN_POINT('',(-1.236030571611,-6.560480641737,+    2.352277442495));+#109 = CARTESIAN_POINT('',(-3.769083784611,-4.818226231748,+    2.352277442495));+#110 = CARTESIAN_POINT('',(-4.999999999998,-2.381651773528,+    2.352277442495));+#111 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.352277442495));+#112 = CARTESIAN_POINT('',(-5.,5.394650135827E-16,2.397920988954));+#113 = CARTESIAN_POINT('',(-5.000000000003,2.381651773529,2.397920988954+    ));+#114 = CARTESIAN_POINT('',(-3.76908378459,4.818226231737,2.397920988954)+  );+#115 = CARTESIAN_POINT('',(-1.236030571653,6.560480641776,2.397920988954+    ));+#116 = CARTESIAN_POINT('',(2.249772170807,6.828057715706,2.397920988954)+  );+#117 = CARTESIAN_POINT('',(5.261090838754,4.971090302092,2.397920988953)+  );+#118 = CARTESIAN_POINT('',(7.469576757498,2.260332741402,2.397920988954)+  );+#119 = CARTESIAN_POINT('',(7.469576757561,-2.260332741463,2.397920988953+    ));+#120 = CARTESIAN_POINT('',(5.26109083875,-4.971090301982,2.397920988954)+  );+#121 = CARTESIAN_POINT('',(2.249772170767,-6.828057715803,2.397920988954+    ));+#122 = CARTESIAN_POINT('',(-1.236030571609,-6.560480641729,+    2.397920988954));+#123 = CARTESIAN_POINT('',(-3.769083784613,-4.81822623175,2.397920988954+    ));+#124 = CARTESIAN_POINT('',(-4.999999999998,-2.381651773527,+    2.397920988954));+#125 = CARTESIAN_POINT('',(-5.,5.394650135827E-16,2.397920988954));+#126 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+    2.402070402268));+#127 = CARTESIAN_POINT('',(-4.954545454548,2.360000393769,2.402070402268+    ));+#128 = CARTESIAN_POINT('',(-3.73481938655,4.774424175086,2.402070402268)+  );+#129 = CARTESIAN_POINT('',(-1.224793930091,6.500839908667,2.402070402268+    ));+#130 = CARTESIAN_POINT('',(2.229319696528,6.765984463749,2.402070402268)+  );+#131 = CARTESIAN_POINT('',(5.213262740212,4.92589857207,2.402070402268)+  );+#132 = CARTESIAN_POINT('',(7.401671514264,2.239784261931,2.402070402268)+  );+#133 = CARTESIAN_POINT('',(7.401671514293,-2.239784261978,2.402070402268+    ));+#134 = CARTESIAN_POINT('',(5.213262740226,-4.925898571987,2.402070402268+    ));+#135 = CARTESIAN_POINT('',(2.229319696485,-6.765984463822,2.402070402268+    ));+#136 = CARTESIAN_POINT('',(-1.224793930051,-6.500839908633,+    2.402070402268));+#137 = CARTESIAN_POINT('',(-3.734819386569,-4.774424175095,+    2.402070402268));+#138 = CARTESIAN_POINT('',(-4.954545454544,-2.360000393769,+    2.402070402268));+#139 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+    2.402070402268));+#140 = DEFINITIONAL_REPRESENTATION('',(#141),#145);+#141 = LINE('',#142,#143);+#142 = CARTESIAN_POINT('',(4.735470593718E-13,-6.213111017846E-16));+#143 = VECTOR('',#144,1.);+#144 = DIRECTION('',(0.,1.));+#145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#146 = ORIENTED_EDGE('',*,*,#147,.F.);+#147 = EDGE_CURVE('',#148,#44,#150,.T.);+#148 = VERTEX_POINT('',#149);+#149 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,1.316666666667));+#150 = SEAM_CURVE('',#151,(#155,#162),.PCURVE_S1.);+#151 = LINE('',#152,#153);+#152 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,0.65));+#153 = VECTOR('',#154,1.);+#154 = DIRECTION('',(0.,0.,1.));+#155 = PCURVE('',#63,#156);+#156 = DEFINITIONAL_REPRESENTATION('',(#157),#161);+#157 = LINE('',#158,#159);+#158 = CARTESIAN_POINT('',(0.,0.));+#159 = VECTOR('',#160,1.);+#160 = DIRECTION('',(0.,1.));+#161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#162 = PCURVE('',#63,#163);+#163 = DEFINITIONAL_REPRESENTATION('',(#164),#168);+#164 = LINE('',#165,#166);+#165 = CARTESIAN_POINT('',(6.28318530718,0.));+#166 = VECTOR('',#167,1.);+#167 = DIRECTION('',(0.,1.));+#168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#169 = ORIENTED_EDGE('',*,*,#170,.F.);+#170 = EDGE_CURVE('',#148,#148,#171,.T.);+#171 = SURFACE_CURVE('',#172,(#177,#184),.PCURVE_S1.);+#172 = CIRCLE('',#173,5.);+#173 = AXIS2_PLACEMENT_3D('',#174,#175,#176);+#174 = CARTESIAN_POINT('',(0.,0.,1.316666666667));+#175 = DIRECTION('',(0.,0.,-1.));+#176 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#177 = PCURVE('',#63,#178);+#178 = DEFINITIONAL_REPRESENTATION('',(#179),#183);+#179 = LINE('',#180,#181);+#180 = CARTESIAN_POINT('',(6.28318530718,0.666666666667));+#181 = VECTOR('',#182,1.);+#182 = DIRECTION('',(-1.,0.));+#183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#184 = PCURVE('',#185,#190);+#185 = TOROIDAL_SURFACE('',#186,4.333333333333,0.666666666667);+#186 = AXIS2_PLACEMENT_3D('',#187,#188,#189);+#187 = CARTESIAN_POINT('',(0.,0.,1.316666666667));+#188 = DIRECTION('',(0.,0.,-1.));+#189 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#190 = DEFINITIONAL_REPRESENTATION('',(#191),#195);+#191 = LINE('',#192,#193);+#192 = CARTESIAN_POINT('',(0.,0.));+#193 = VECTOR('',#194,1.);+#194 = DIRECTION('',(1.,0.));+#195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#196 = ORIENTED_EDGE('',*,*,#147,.T.);+#197 = ADVANCED_FACE('',(#198),#185,.T.);+#198 = FACE_BOUND('',#199,.T.);+#199 = EDGE_LOOP('',(#200,#201,#225,#256));+#200 = ORIENTED_EDGE('',*,*,#170,.T.);+#201 = ORIENTED_EDGE('',*,*,#202,.T.);+#202 = EDGE_CURVE('',#148,#203,#205,.T.);+#203 = VERTEX_POINT('',#204);+#204 = CARTESIAN_POINT('',(-4.333333333333,5.306802796305E-16,0.65));+#205 = SEAM_CURVE('',#206,(#211,#218),.PCURVE_S1.);+#206 = CIRCLE('',#207,0.666666666667);+#207 = AXIS2_PLACEMENT_3D('',#208,#209,#210);+#208 = CARTESIAN_POINT('',(-4.333333333333,5.306802796305E-16,+    1.316666666667));+#209 = DIRECTION('',(-1.224646799147E-16,-1.,-0.));+#210 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#211 = PCURVE('',#185,#212);+#212 = DEFINITIONAL_REPRESENTATION('',(#213),#217);+#213 = LINE('',#214,#215);+#214 = CARTESIAN_POINT('',(6.28318530718,0.));+#215 = VECTOR('',#216,1.);+#216 = DIRECTION('',(0.,1.));+#217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#218 = PCURVE('',#185,#219);+#219 = DEFINITIONAL_REPRESENTATION('',(#220),#224);+#220 = LINE('',#221,#222);+#221 = CARTESIAN_POINT('',(0.,0.));+#222 = VECTOR('',#223,1.);+#223 = DIRECTION('',(0.,1.));+#224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#225 = ORIENTED_EDGE('',*,*,#226,.F.);+#226 = EDGE_CURVE('',#203,#203,#227,.T.);+#227 = SURFACE_CURVE('',#228,(#233,#240),.PCURVE_S1.);+#228 = CIRCLE('',#229,4.333333333333);+#229 = AXIS2_PLACEMENT_3D('',#230,#231,#232);+#230 = CARTESIAN_POINT('',(0.,0.,0.65));+#231 = DIRECTION('',(0.,0.,-1.));+#232 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#233 = PCURVE('',#185,#234);+#234 = DEFINITIONAL_REPRESENTATION('',(#235),#239);+#235 = LINE('',#236,#237);+#236 = CARTESIAN_POINT('',(0.,1.570796326795));+#237 = VECTOR('',#238,1.);+#238 = DIRECTION('',(1.,0.));+#239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#240 = PCURVE('',#241,#246);+#241 = PLANE('',#242);+#242 = AXIS2_PLACEMENT_3D('',#243,#244,#245);+#243 = CARTESIAN_POINT('',(2.629692562576E-16,-5.069714440537E-17,0.65)+  );+#244 = DIRECTION('',(0.,0.,1.));+#245 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#246 = DEFINITIONAL_REPRESENTATION('',(#247),#255);+#247 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#248,#249,#250,#251,#252,#253+,#254),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+    -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#248 = CARTESIAN_POINT('',(4.333333333333,-5.069714440537E-17));+#249 = CARTESIAN_POINT('',(4.333333333333,-7.505553499465));+#250 = CARTESIAN_POINT('',(-2.166666666666,-3.752776749732));+#251 = CARTESIAN_POINT('',(-8.666666666666,-1.112057703666E-15));+#252 = CARTESIAN_POINT('',(-2.166666666667,3.752776749732));+#253 = CARTESIAN_POINT('',(4.333333333333,7.505553499465));+#254 = CARTESIAN_POINT('',(4.333333333333,-5.069714440537E-17));+#255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#256 = ORIENTED_EDGE('',*,*,#202,.F.);+#257 = ADVANCED_FACE('',(#258),#97,.T.);+#258 = FACE_BOUND('',#259,.T.);+#259 = EDGE_LOOP('',(#260,#283,#346,#347));+#260 = ORIENTED_EDGE('',*,*,#261,.T.);+#261 = EDGE_CURVE('',#44,#262,#264,.T.);+#262 = VERTEX_POINT('',#263);+#263 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+    2.402070402268));+#264 = SEAM_CURVE('',#265,(#269,#276),.PCURVE_S1.);+#265 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#266,#267,#268),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+31.415926535898),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.738548945876,1.)) REPRESENTATION_ITEM('') );+#266 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.352277442495));+#267 = CARTESIAN_POINT('',(-5.,5.394650135827E-16,2.397920988954));+#268 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+    2.402070402268));+#269 = PCURVE('',#97,#270);+#270 = DEFINITIONAL_REPRESENTATION('',(#271),#275);+#271 = LINE('',#272,#273);+#272 = CARTESIAN_POINT('',(4.735470593718E-13,0.));+#273 = VECTOR('',#274,1.);+#274 = DIRECTION('',(1.,0.));+#275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#276 = PCURVE('',#97,#277);+#277 = DEFINITIONAL_REPRESENTATION('',(#278),#282);+#278 = LINE('',#279,#280);+#279 = CARTESIAN_POINT('',(4.735470593718E-13,31.415926535898));+#280 = VECTOR('',#281,1.);+#281 = DIRECTION('',(1.,0.));+#282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#283 = ORIENTED_EDGE('',*,*,#284,.T.);+#284 = EDGE_CURVE('',#262,#262,#285,.T.);+#285 = SURFACE_CURVE('',#286,(#301,#308),.PCURVE_S1.);+#286 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#287,#288,#289,#290,#291,+    #292,#293,#294,#295,#296,#297,#298,#299,#300),.UNSPECIFIED.,.T.,.F.)+ B_SPLINE_CURVE_WITH_KNOTS((1,13,13,1),(-31.41592653589,+    6.213111017846E-16,31.415926535898,62.831853071796),.UNSPECIFIED.) +CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,1.,+    1.000000000001,0.999999999997,1.000000000006,0.99999999999,+    1.000000000011,0.99999999999,1.000000000008,0.999999999995,+1.000000000002,0.999999999999,1.,1.)) REPRESENTATION_ITEM('') );+#287 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+    2.402070402268));+#288 = CARTESIAN_POINT('',(-4.954545454548,2.360000393769,2.402070402268+    ));+#289 = CARTESIAN_POINT('',(-3.73481938655,4.774424175086,2.402070402268)+  );+#290 = CARTESIAN_POINT('',(-1.224793930091,6.500839908667,2.402070402268+    ));+#291 = CARTESIAN_POINT('',(2.229319696528,6.765984463749,2.402070402268)+  );+#292 = CARTESIAN_POINT('',(5.213262740212,4.92589857207,2.402070402268)+  );+#293 = CARTESIAN_POINT('',(7.401671514264,2.239784261931,2.402070402268)+  );+#294 = CARTESIAN_POINT('',(7.401671514293,-2.239784261978,2.402070402268+    ));+#295 = CARTESIAN_POINT('',(5.213262740226,-4.925898571987,2.402070402268+    ));+#296 = CARTESIAN_POINT('',(2.229319696485,-6.765984463822,2.402070402268+    ));+#297 = CARTESIAN_POINT('',(-1.224793930051,-6.500839908633,+    2.402070402268));+#298 = CARTESIAN_POINT('',(-3.734819386569,-4.774424175095,+    2.402070402268));+#299 = CARTESIAN_POINT('',(-4.954545454544,-2.360000393769,+    2.402070402268));+#300 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+    2.402070402268));+#301 = PCURVE('',#97,#302);+#302 = DEFINITIONAL_REPRESENTATION('',(#303),#307);+#303 = LINE('',#304,#305);+#304 = CARTESIAN_POINT('',(31.415926536674,0.));+#305 = VECTOR('',#306,1.);+#306 = DIRECTION('',(0.,1.));+#307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#308 = PCURVE('',#309,#318);+#309 = SURFACE_OF_REVOLUTION('',#310,#315);+#310 = CIRCLE('',#311,0.5);+#311 = AXIS2_PLACEMENT_3D('',#312,#313,#314);+#312 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.9));+#313 = DIRECTION('',(-1.224646799147E-16,-1.,-0.));+#314 = DIRECTION('',(0.,0.,-1.));+#315 = AXIS1_PLACEMENT('',#316,#317);+#316 = CARTESIAN_POINT('',(0.,0.,0.65));+#317 = DIRECTION('',(-0.,0.,-1.));+#318 = DEFINITIONAL_REPRESENTATION('',(#319),#345);+#319 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#320,#321,#322,#323,#324,#325,+    #326,#327,#328,#329,#330,#331,#332,#333,#334,#335,#336,#337,#338,+    #339,#340,#341,#342,#343,#344),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,+    1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(6.213111017846E-16,1.427996660723,+    2.855993321445,4.283989982168,5.711986642891,7.139983303613,+    8.567979964336,9.995976625058,11.423973285781,12.851969946504,+    14.279966607226,15.707963267949,17.135959928672,18.563956589394,+    19.991953250117,21.41994991084,22.847946571562,24.275943232285,+    25.703939893007,27.13193655373,28.559933214453,29.987929875175,+    31.415926535898),.QUASI_UNIFORM_KNOTS.);+#320 = CARTESIAN_POINT('',(0.,9.103477803831E-02));+#321 = CARTESIAN_POINT('',(9.385684572074E-02,9.110473955866E-02));+#322 = CARTESIAN_POINT('',(0.282615789764,9.111980714431E-02));+#323 = CARTESIAN_POINT('',(0.567874598603,9.097009903475E-02));+#324 = CARTESIAN_POINT('',(0.854108907278,9.102711027753E-02));+#325 = CARTESIAN_POINT('',(1.140627170535,9.105116784148E-02));+#326 = CARTESIAN_POINT('',(1.42701802633,9.104034292857E-02));+#327 = CARTESIAN_POINT('',(1.713151845887,9.105268852798E-02));+#328 = CARTESIAN_POINT('',(1.999044616411,9.104250836725E-02));+#329 = CARTESIAN_POINT('',(2.28476614771,9.100027838954E-02));+#330 = CARTESIAN_POINT('',(2.570394888575,9.099676042279E-02));+#331 = CARTESIAN_POINT('',(2.855993851066,9.105265152782E-02));+#332 = CARTESIAN_POINT('',(3.14159265359,9.108984213674E-02));+#333 = CARTESIAN_POINT('',(3.427191456113,9.105265152682E-02));+#334 = CARTESIAN_POINT('',(3.712790418604,9.099676042118E-02));+#335 = CARTESIAN_POINT('',(3.99841915947,9.100027838792E-02));+#336 = CARTESIAN_POINT('',(4.284140690769,9.104250836608E-02));+#337 = CARTESIAN_POINT('',(4.570033461293,9.105268852738E-02));+#338 = CARTESIAN_POINT('',(4.856167280849,9.104034292835E-02));+#339 = CARTESIAN_POINT('',(5.142558136645,9.105116784128E-02));+#340 = CARTESIAN_POINT('',(5.429076399901,9.10271102771E-02));+#341 = CARTESIAN_POINT('',(5.715310708576,9.097009903375E-02));+#342 = CARTESIAN_POINT('',(6.000569517416,9.11198071446E-02));+#343 = CARTESIAN_POINT('',(6.189328461459,9.110473955905E-02));+#344 = CARTESIAN_POINT('',(6.28318530718,9.103477803831E-02));+#345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#346 = ORIENTED_EDGE('',*,*,#261,.F.);+#347 = ORIENTED_EDGE('',*,*,#43,.F.);+#348 = ADVANCED_FACE('',(#349,#579),#241,.T.);+#349 = FACE_BOUND('',#350,.T.);+#350 = EDGE_LOOP('',(#351,#381,#410,#438,#467,#495,#524,#552));+#351 = ORIENTED_EDGE('',*,*,#352,.T.);+#352 = EDGE_CURVE('',#353,#355,#357,.T.);+#353 = VERTEX_POINT('',#354);+#354 = CARTESIAN_POINT('',(-5.15,0.719374728497,0.65));+#355 = VERTEX_POINT('',#356);+#356 = CARTESIAN_POINT('',(-5.15,-0.719374728497,0.65));+#357 = SURFACE_CURVE('',#358,(#362,#369),.PCURVE_S1.);+#358 = LINE('',#359,#360);+#359 = CARTESIAN_POINT('',(-5.15,2.075,0.65));+#360 = VECTOR('',#361,1.);+#361 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#362 = PCURVE('',#241,#363);+#363 = DEFINITIONAL_REPRESENTATION('',(#364),#368);+#364 = LINE('',#365,#366);+#365 = CARTESIAN_POINT('',(5.15,-2.075));+#366 = VECTOR('',#367,1.);+#367 = DIRECTION('',(0.,1.));+#368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#369 = PCURVE('',#370,#375);+#370 = PLANE('',#371);+#371 = AXIS2_PLACEMENT_3D('',#372,#373,#374);+#372 = CARTESIAN_POINT('',(-5.15,4.15,0.15));+#373 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#374 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#375 = DEFINITIONAL_REPRESENTATION('',(#376),#380);+#376 = LINE('',#377,#378);+#377 = CARTESIAN_POINT('',(2.075,-0.5));+#378 = VECTOR('',#379,1.);+#379 = DIRECTION('',(1.,0.));+#380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#381 = ORIENTED_EDGE('',*,*,#382,.T.);+#382 = EDGE_CURVE('',#355,#383,#385,.T.);+#383 = VERTEX_POINT('',#384);+#384 = CARTESIAN_POINT('',(-0.719374728497,-5.15,0.65));+#385 = SURFACE_CURVE('',#386,(#391,#398),.PCURVE_S1.);+#386 = CIRCLE('',#387,5.2);+#387 = AXIS2_PLACEMENT_3D('',#388,#389,#390);+#388 = CARTESIAN_POINT('',(0.,0.,0.65));+#389 = DIRECTION('',(0.,0.,1.));+#390 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#391 = PCURVE('',#241,#392);+#392 = DEFINITIONAL_REPRESENTATION('',(#393),#397);+#393 = CIRCLE('',#394,5.2);+#394 = AXIS2_PLACEMENT_2D('',#395,#396);+#395 = CARTESIAN_POINT('',(2.629692562576E-16,-5.069714440537E-17));+#396 = DIRECTION('',(1.,0.));+#397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#398 = PCURVE('',#399,#404);+#399 = CYLINDRICAL_SURFACE('',#400,5.2);+#400 = AXIS2_PLACEMENT_3D('',#401,#402,#403);+#401 = CARTESIAN_POINT('',(0.,0.,0.65));+#402 = DIRECTION('',(0.,0.,-1.));+#403 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#404 = DEFINITIONAL_REPRESENTATION('',(#405),#409);+#405 = LINE('',#406,#407);+#406 = CARTESIAN_POINT('',(6.28318530718,0.));+#407 = VECTOR('',#408,1.);+#408 = DIRECTION('',(-1.,0.));+#409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#410 = ORIENTED_EDGE('',*,*,#411,.T.);+#411 = EDGE_CURVE('',#383,#412,#414,.T.);+#412 = VERTEX_POINT('',#413);+#413 = CARTESIAN_POINT('',(0.719374728497,-5.15,0.65));+#414 = SURFACE_CURVE('',#415,(#419,#426),.PCURVE_S1.);+#415 = LINE('',#416,#417);+#416 = CARTESIAN_POINT('',(-2.075,-5.15,0.65));+#417 = VECTOR('',#418,1.);+#418 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#419 = PCURVE('',#241,#420);+#420 = DEFINITIONAL_REPRESENTATION('',(#421),#425);+#421 = LINE('',#422,#423);+#422 = CARTESIAN_POINT('',(2.075,5.15));+#423 = VECTOR('',#424,1.);+#424 = DIRECTION('',(-1.,0.));+#425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#426 = PCURVE('',#427,#432);+#427 = PLANE('',#428);+#428 = AXIS2_PLACEMENT_3D('',#429,#430,#431);+#429 = CARTESIAN_POINT('',(-4.15,-5.15,0.15));+#430 = DIRECTION('',(1.224646799147E-16,1.,0.));+#431 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#432 = DEFINITIONAL_REPRESENTATION('',(#433),#437);+#433 = LINE('',#434,#435);+#434 = CARTESIAN_POINT('',(2.075,-0.5));+#435 = VECTOR('',#436,1.);+#436 = DIRECTION('',(1.,0.));+#437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#438 = ORIENTED_EDGE('',*,*,#439,.T.);+#439 = EDGE_CURVE('',#412,#440,#442,.T.);+#440 = VERTEX_POINT('',#441);+#441 = CARTESIAN_POINT('',(5.15,-0.719374728497,0.65));+#442 = SURFACE_CURVE('',#443,(#448,#455),.PCURVE_S1.);+#443 = CIRCLE('',#444,5.2);+#444 = AXIS2_PLACEMENT_3D('',#445,#446,#447);+#445 = CARTESIAN_POINT('',(0.,0.,0.65));+#446 = DIRECTION('',(0.,0.,1.));+#447 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#448 = PCURVE('',#241,#449);+#449 = DEFINITIONAL_REPRESENTATION('',(#450),#454);+#450 = CIRCLE('',#451,5.2);+#451 = AXIS2_PLACEMENT_2D('',#452,#453);+#452 = CARTESIAN_POINT('',(2.629692562576E-16,-5.069714440537E-17));+#453 = DIRECTION('',(1.,0.));+#454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#455 = PCURVE('',#456,#461);+#456 = CYLINDRICAL_SURFACE('',#457,5.2);+#457 = AXIS2_PLACEMENT_3D('',#458,#459,#460);+#458 = CARTESIAN_POINT('',(0.,0.,0.65));+#459 = DIRECTION('',(0.,0.,-1.));+#460 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#461 = DEFINITIONAL_REPRESENTATION('',(#462),#466);+#462 = LINE('',#463,#464);+#463 = CARTESIAN_POINT('',(6.28318530718,0.));+#464 = VECTOR('',#465,1.);+#465 = DIRECTION('',(-1.,0.));+#466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#467 = ORIENTED_EDGE('',*,*,#468,.T.);+#468 = EDGE_CURVE('',#440,#469,#471,.T.);+#469 = VERTEX_POINT('',#470);+#470 = CARTESIAN_POINT('',(5.15,0.719374728497,0.65));+#471 = SURFACE_CURVE('',#472,(#476,#483),.PCURVE_S1.);+#472 = LINE('',#473,#474);+#473 = CARTESIAN_POINT('',(5.15,-2.575,0.65));+#474 = VECTOR('',#475,1.);+#475 = DIRECTION('',(1.224646799147E-16,1.,0.));+#476 = PCURVE('',#241,#477);+#477 = DEFINITIONAL_REPRESENTATION('',(#478),#482);+#478 = LINE('',#479,#480);+#479 = CARTESIAN_POINT('',(-5.15,2.575));+#480 = VECTOR('',#481,1.);+#481 = DIRECTION('',(0.,-1.));+#482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#483 = PCURVE('',#484,#489);+#484 = PLANE('',#485);+#485 = AXIS2_PLACEMENT_3D('',#486,#487,#488);+#486 = CARTESIAN_POINT('',(5.15,-5.15,0.15));+#487 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#488 = DIRECTION('',(1.224646799147E-16,1.,0.));+#489 = DEFINITIONAL_REPRESENTATION('',(#490),#494);+#490 = LINE('',#491,#492);+#491 = CARTESIAN_POINT('',(2.575,-0.5));+#492 = VECTOR('',#493,1.);+#493 = DIRECTION('',(1.,0.));+#494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#495 = ORIENTED_EDGE('',*,*,#496,.T.);+#496 = EDGE_CURVE('',#469,#497,#499,.T.);+#497 = VERTEX_POINT('',#498);+#498 = CARTESIAN_POINT('',(0.719374728497,5.15,0.65));+#499 = SURFACE_CURVE('',#500,(#505,#512),.PCURVE_S1.);+#500 = CIRCLE('',#501,5.2);+#501 = AXIS2_PLACEMENT_3D('',#502,#503,#504);+#502 = CARTESIAN_POINT('',(0.,0.,0.65));+#503 = DIRECTION('',(0.,0.,1.));+#504 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#505 = PCURVE('',#241,#506);+#506 = DEFINITIONAL_REPRESENTATION('',(#507),#511);+#507 = CIRCLE('',#508,5.2);+#508 = AXIS2_PLACEMENT_2D('',#509,#510);+#509 = CARTESIAN_POINT('',(2.629692562576E-16,-5.069714440537E-17));+#510 = DIRECTION('',(1.,0.));+#511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#512 = PCURVE('',#513,#518);+#513 = CYLINDRICAL_SURFACE('',#514,5.2);+#514 = AXIS2_PLACEMENT_3D('',#515,#516,#517);+#515 = CARTESIAN_POINT('',(0.,0.,0.65));+#516 = DIRECTION('',(0.,0.,-1.));+#517 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#518 = DEFINITIONAL_REPRESENTATION('',(#519),#523);+#519 = LINE('',#520,#521);+#520 = CARTESIAN_POINT('',(6.28318530718,0.));+#521 = VECTOR('',#522,1.);+#522 = DIRECTION('',(-1.,0.));+#523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#524 = ORIENTED_EDGE('',*,*,#525,.T.);+#525 = EDGE_CURVE('',#497,#526,#528,.T.);+#526 = VERTEX_POINT('',#527);+#527 = CARTESIAN_POINT('',(-0.719374728497,5.15,0.65));+#528 = SURFACE_CURVE('',#529,(#533,#540),.PCURVE_S1.);+#529 = LINE('',#530,#531);+#530 = CARTESIAN_POINT('',(2.575,5.15,0.65));+#531 = VECTOR('',#532,1.);+#532 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#533 = PCURVE('',#241,#534);+#534 = DEFINITIONAL_REPRESENTATION('',(#535),#539);+#535 = LINE('',#536,#537);+#536 = CARTESIAN_POINT('',(-2.575,-5.15));+#537 = VECTOR('',#538,1.);+#538 = DIRECTION('',(1.,0.));+#539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#540 = PCURVE('',#541,#546);+#541 = PLANE('',#542);+#542 = AXIS2_PLACEMENT_3D('',#543,#544,#545);+#543 = CARTESIAN_POINT('',(5.15,5.15,0.15));+#544 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#545 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#546 = DEFINITIONAL_REPRESENTATION('',(#547),#551);+#547 = LINE('',#548,#549);+#548 = CARTESIAN_POINT('',(2.575,-0.5));+#549 = VECTOR('',#550,1.);+#550 = DIRECTION('',(1.,0.));+#551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#552 = ORIENTED_EDGE('',*,*,#553,.T.);+#553 = EDGE_CURVE('',#526,#353,#554,.T.);+#554 = SURFACE_CURVE('',#555,(#560,#567),.PCURVE_S1.);+#555 = CIRCLE('',#556,5.2);+#556 = AXIS2_PLACEMENT_3D('',#557,#558,#559);+#557 = CARTESIAN_POINT('',(0.,0.,0.65));+#558 = DIRECTION('',(0.,0.,1.));+#559 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#560 = PCURVE('',#241,#561);+#561 = DEFINITIONAL_REPRESENTATION('',(#562),#566);+#562 = CIRCLE('',#563,5.2);+#563 = AXIS2_PLACEMENT_2D('',#564,#565);+#564 = CARTESIAN_POINT('',(2.629692562576E-16,-5.069714440537E-17));+#565 = DIRECTION('',(1.,0.));+#566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#567 = PCURVE('',#568,#573);+#568 = CYLINDRICAL_SURFACE('',#569,5.2);+#569 = AXIS2_PLACEMENT_3D('',#570,#571,#572);+#570 = CARTESIAN_POINT('',(0.,0.,0.65));+#571 = DIRECTION('',(0.,0.,-1.));+#572 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#573 = DEFINITIONAL_REPRESENTATION('',(#574),#578);+#574 = LINE('',#575,#576);+#575 = CARTESIAN_POINT('',(6.28318530718,0.));+#576 = VECTOR('',#577,1.);+#577 = DIRECTION('',(-1.,0.));+#578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#579 = FACE_BOUND('',#580,.T.);+#580 = EDGE_LOOP('',(#581));+#581 = ORIENTED_EDGE('',*,*,#226,.T.);+#582 = ADVANCED_FACE('',(#583),#309,.F.);+#583 = FACE_BOUND('',#584,.F.);+#584 = EDGE_LOOP('',(#585,#609,#610,#611));+#585 = ORIENTED_EDGE('',*,*,#586,.F.);+#586 = EDGE_CURVE('',#262,#587,#589,.T.);+#587 = VERTEX_POINT('',#588);+#588 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+    3.397929597732));+#589 = SEAM_CURVE('',#590,(#595,#602),.PCURVE_S1.);+#590 = CIRCLE('',#591,0.5);+#591 = AXIS2_PLACEMENT_3D('',#592,#593,#594);+#592 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.9));+#593 = DIRECTION('',(-1.224646799147E-16,-1.,-0.));+#594 = DIRECTION('',(0.,0.,-1.));+#595 = PCURVE('',#309,#596);+#596 = DEFINITIONAL_REPRESENTATION('',(#597),#601);+#597 = LINE('',#598,#599);+#598 = CARTESIAN_POINT('',(0.,6.383782391595E-16));+#599 = VECTOR('',#600,1.);+#600 = DIRECTION('',(0.,1.));+#601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#602 = PCURVE('',#309,#603);+#603 = DEFINITIONAL_REPRESENTATION('',(#604),#608);+#604 = LINE('',#605,#606);+#605 = CARTESIAN_POINT('',(6.28318530718,6.383782391595E-16));+#606 = VECTOR('',#607,1.);+#607 = DIRECTION('',(0.,1.));+#608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#609 = ORIENTED_EDGE('',*,*,#284,.T.);+#610 = ORIENTED_EDGE('',*,*,#586,.T.);+#611 = ORIENTED_EDGE('',*,*,#612,.F.);+#612 = EDGE_CURVE('',#587,#587,#613,.T.);+#613 = SURFACE_CURVE('',#614,(#629,#658),.PCURVE_S1.);+#614 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#615,#616,#617,#618,#619,+    #620,#621,#622,#623,#624,#625,#626,#627,#628),.UNSPECIFIED.,.T.,.F.)+ B_SPLINE_CURVE_WITH_KNOTS((1,13,13,1),(-31.41592653589,+    6.213111017846E-16,31.415926535898,62.831853071796),.UNSPECIFIED.) +CURVE() GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,1.,+    1.000000000001,0.999999999997,1.000000000006,0.99999999999,+    1.000000000011,0.99999999999,1.000000000008,0.999999999995,+1.000000000002,0.999999999999,1.,1.)) REPRESENTATION_ITEM('') );+#615 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+    3.397929597732));+#616 = CARTESIAN_POINT('',(-4.954545454548,2.360000393769,3.397929597732+    ));+#617 = CARTESIAN_POINT('',(-3.73481938655,4.774424175087,3.397929597732)+  );+#618 = CARTESIAN_POINT('',(-1.22479393009,6.500839908663,3.397929597732)+  );+#619 = CARTESIAN_POINT('',(2.229319696526,6.765984463757,3.397929597732)+  );+#620 = CARTESIAN_POINT('',(5.213262740214,4.925898572058,3.397929597732)+  );+#621 = CARTESIAN_POINT('',(7.401671514262,2.239784261947,3.397929597732)+  );+#622 = CARTESIAN_POINT('',(7.401671514295,-2.239784261995,3.397929597732+    ));+#623 = CARTESIAN_POINT('',(5.213262740226,-4.925898571972,3.397929597732+    ));+#624 = CARTESIAN_POINT('',(2.229319696486,-6.765984463832,3.397929597732+    ));+#625 = CARTESIAN_POINT('',(-1.224793930051,-6.500839908627,+    3.397929597732));+#626 = CARTESIAN_POINT('',(-3.734819386569,-4.774424175097,+    3.397929597732));+#627 = CARTESIAN_POINT('',(-4.954545454544,-2.360000393768,+    3.397929597732));+#628 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+    3.397929597732));+#629 = PCURVE('',#309,#630);+#630 = DEFINITIONAL_REPRESENTATION('',(#631),#657);+#631 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#632,#633,#634,#635,#636,#637,+    #638,#639,#640,#641,#642,#643,#644,#645,#646,#647,#648,#649,#650,+    #651,#652,#653,#654,#655,#656),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,+    1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),(6.213111017846E-16,1.427996660723,+    2.855993321445,4.283989982168,5.711986642891,7.139983303613,+    8.567979964336,9.995976625058,11.423973285781,12.851969946504,+    14.279966607226,15.707963267949,17.135959928672,18.563956589394,+    19.991953250117,21.41994991084,22.847946571562,24.275943232285,+    25.703939893007,27.13193655373,28.559933214453,29.987929875175,+    31.415926535898),.QUASI_UNIFORM_KNOTS.);+#632 = CARTESIAN_POINT('',(0.,3.050557875551));+#633 = CARTESIAN_POINT('',(9.385684572075E-02,3.050487914031));+#634 = CARTESIAN_POINT('',(0.282615789764,3.050472846445));+#635 = CARTESIAN_POINT('',(0.567874598603,3.050622554555));+#636 = CARTESIAN_POINT('',(0.854108907278,3.050565543312));+#637 = CARTESIAN_POINT('',(1.140627170535,3.050541485748));+#638 = CARTESIAN_POINT('',(1.42701802633,3.050552310661));+#639 = CARTESIAN_POINT('',(1.713151845887,3.050539965062));+#640 = CARTESIAN_POINT('',(1.999044616411,3.050550145223));+#641 = CARTESIAN_POINT('',(2.28476614771,3.0505923752));+#642 = CARTESIAN_POINT('',(2.570394888575,3.050595893167));+#643 = CARTESIAN_POINT('',(2.855993851066,3.050540002062));+#644 = CARTESIAN_POINT('',(3.14159265359,3.050502811454));+#645 = CARTESIAN_POINT('',(3.427191456113,3.050540002064));+#646 = CARTESIAN_POINT('',(3.712790418604,3.050595893169));+#647 = CARTESIAN_POINT('',(3.99841915947,3.050592375202));+#648 = CARTESIAN_POINT('',(4.284140690769,3.050550145224));+#649 = CARTESIAN_POINT('',(4.570033461293,3.050539965062));+#650 = CARTESIAN_POINT('',(4.856167280849,3.050552310661));+#651 = CARTESIAN_POINT('',(5.142558136645,3.050541485748));+#652 = CARTESIAN_POINT('',(5.429076399901,3.050565543312));+#653 = CARTESIAN_POINT('',(5.715310708576,3.050622554556));+#654 = CARTESIAN_POINT('',(6.000569517416,3.050472846445));+#655 = CARTESIAN_POINT('',(6.189328461459,3.050487914031));+#656 = CARTESIAN_POINT('',(6.28318530718,3.050557875551));+#657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#658 = PCURVE('',#659,#702);+#659 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,(+    (#660,#661,#662,#663,#664,#665,#666,#667,#668,#669,#670,#671,#672+      ,#673)+    ,(#674,#675,#676,#677,#678,#679,#680,#681,#682,#683,#684,#685,#686+      ,#687)+    ,(#688,#689,#690,#691,#692,#693,#694,#695,#696,#697,#698,#699,#700+,#701+    )),.UNSPECIFIED.,.F.,.T.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(1,+    13,13,1),(0.,31.415926535898),(-31.41592653589,6.213111017846E-16,+    31.415926535898,62.831853071796),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE((+    (1.,1.,1.000000000001,0.999999999997,1.000000000006,0.99999999999+      ,1.000000000011,0.99999999999,1.000000000008,0.999999999995+      ,1.000000000002,0.999999999999,1.,1.)+    ,(0.738548945876,0.738548945876,0.738548945877,0.738548945873+      ,0.738548945882,0.738548945867,0.738548945886,0.738548945867+      ,0.738548945883,0.738548945872,0.738548945878,0.738548945875+      ,0.738548945876,0.738548945876)+    ,(1.,1.,1.000000000001,0.999999999997,1.000000000006,0.99999999999+      ,1.000000000011,0.99999999999,1.000000000008,0.999999999995+,1.000000000002,0.999999999999,1.,1.+  ))) REPRESENTATION_ITEM('') SURFACE() );+#660 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+    3.397929597732));+#661 = CARTESIAN_POINT('',(-4.954545454548,2.360000393769,3.397929597732+    ));+#662 = CARTESIAN_POINT('',(-3.73481938655,4.774424175087,3.397929597732)+  );+#663 = CARTESIAN_POINT('',(-1.22479393009,6.500839908663,3.397929597732)+  );+#664 = CARTESIAN_POINT('',(2.229319696526,6.765984463757,3.397929597732)+  );+#665 = CARTESIAN_POINT('',(5.213262740214,4.925898572058,3.397929597732)+  );+#666 = CARTESIAN_POINT('',(7.401671514262,2.239784261947,3.397929597732)+  );+#667 = CARTESIAN_POINT('',(7.401671514295,-2.239784261995,3.397929597732+    ));+#668 = CARTESIAN_POINT('',(5.213262740226,-4.925898571972,3.397929597732+    ));+#669 = CARTESIAN_POINT('',(2.229319696486,-6.765984463832,3.397929597732+    ));+#670 = CARTESIAN_POINT('',(-1.224793930051,-6.500839908627,+    3.397929597732));+#671 = CARTESIAN_POINT('',(-3.734819386569,-4.774424175097,+    3.397929597732));+#672 = CARTESIAN_POINT('',(-4.954545454544,-2.360000393768,+    3.397929597732));+#673 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+    3.397929597732));+#674 = CARTESIAN_POINT('',(-5.,5.569295732177E-15,3.402079011046));+#675 = CARTESIAN_POINT('',(-5.000000000003,2.381651773529,3.402079011046+    ));+#676 = CARTESIAN_POINT('',(-3.769083784593,4.818226231737,3.402079011046+    ));+#677 = CARTESIAN_POINT('',(-1.236030571645,6.560480641778,3.402079011046+    ));+#678 = CARTESIAN_POINT('',(2.249772170791,6.828057715703,3.402079011046)+  );+#679 = CARTESIAN_POINT('',(5.261090838776,4.971090302096,3.402079011046)+  );+#680 = CARTESIAN_POINT('',(7.469576757472,2.260332741396,3.402079011046)+  );+#681 = CARTESIAN_POINT('',(7.469576757586,-2.260332741457,3.402079011046+    ));+#682 = CARTESIAN_POINT('',(5.26109083873,-4.971090301989,3.402079011046)+  );+#683 = CARTESIAN_POINT('',(2.24977217078,-6.828057715798,3.402079011046)+  );+#684 = CARTESIAN_POINT('',(-1.236030571616,-6.560480641732,+    3.402079011046));+#685 = CARTESIAN_POINT('',(-3.76908378461,-4.818226231749,3.402079011046+    ));+#686 = CARTESIAN_POINT('',(-4.999999999998,-2.381651773527,+    3.402079011046));+#687 = CARTESIAN_POINT('',(-5.,5.569295732177E-15,3.402079011046));+#688 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,3.447722557505));+#689 = CARTESIAN_POINT('',(-5.000000000003,2.381651773528,3.447722557505+    ));+#690 = CARTESIAN_POINT('',(-3.769083784592,4.818226231739,3.447722557505+    ));+#691 = CARTESIAN_POINT('',(-1.236030571649,6.560480641771,3.447722557505+    ));+#692 = CARTESIAN_POINT('',(2.249772170804,6.828057715716,3.447722557505)+  );+#693 = CARTESIAN_POINT('',(5.261090838752,4.971090302081,3.447722557505)+  );+#694 = CARTESIAN_POINT('',(7.469576757507,2.260332741408,3.447722557505)+  );+#695 = CARTESIAN_POINT('',(7.46957675755,-2.260332741457,3.447722557505)+  );+#696 = CARTESIAN_POINT('',(5.261090838755,-4.971090301995,3.447722557505+    ));+#697 = CARTESIAN_POINT('',(2.249772170768,-6.828057715791,3.447722557505+    ));+#698 = CARTESIAN_POINT('',(-1.236030571613,-6.560480641736,+    3.447722557505));+#699 = CARTESIAN_POINT('',(-3.76908378461,-4.818226231748,3.447722557505+    ));+#700 = CARTESIAN_POINT('',(-4.999999999998,-2.381651773527,+    3.447722557505));+#701 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,3.447722557505));+#702 = DEFINITIONAL_REPRESENTATION('',(#703),#707);+#703 = LINE('',#704,#705);+#704 = CARTESIAN_POINT('',(7.292659403213E-14,-6.213111017846E-16));+#705 = VECTOR('',#706,1.);+#706 = DIRECTION('',(0.,1.));+#707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#708 = ADVANCED_FACE('',(#709),#370,.F.);+#709 = FACE_BOUND('',#710,.F.);+#710 = EDGE_LOOP('',(#711,#741,#769,#797,#818,#819,#842,#870,#898,#921)+  );+#711 = ORIENTED_EDGE('',*,*,#712,.F.);+#712 = EDGE_CURVE('',#713,#715,#717,.T.);+#713 = VERTEX_POINT('',#714);+#714 = CARTESIAN_POINT('',(-5.15,4.15,0.15));+#715 = VERTEX_POINT('',#716);+#716 = CARTESIAN_POINT('',(-5.15,0.45,0.15));+#717 = SURFACE_CURVE('',#718,(#722,#729),.PCURVE_S1.);+#718 = LINE('',#719,#720);+#719 = CARTESIAN_POINT('',(-5.15,4.15,0.15));+#720 = VECTOR('',#721,1.);+#721 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#722 = PCURVE('',#370,#723);+#723 = DEFINITIONAL_REPRESENTATION('',(#724),#728);+#724 = LINE('',#725,#726);+#725 = CARTESIAN_POINT('',(0.,0.));+#726 = VECTOR('',#727,1.);+#727 = DIRECTION('',(1.,0.));+#728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#729 = PCURVE('',#730,#735);+#730 = PLANE('',#731);+#731 = AXIS2_PLACEMENT_3D('',#732,#733,#734);+#732 = CARTESIAN_POINT('',(0.161080870099,-1.972671719701E-17,0.15));+#733 = DIRECTION('',(0.,0.,1.));+#734 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#735 = DEFINITIONAL_REPRESENTATION('',(#736),#740);+#736 = LINE('',#737,#738);+#737 = CARTESIAN_POINT('',(5.311080870099,-4.15));+#738 = VECTOR('',#739,1.);+#739 = DIRECTION('',(0.,1.));+#740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#741 = ORIENTED_EDGE('',*,*,#742,.T.);+#742 = EDGE_CURVE('',#713,#743,#745,.T.);+#743 = VERTEX_POINT('',#744);+#744 = CARTESIAN_POINT('',(-5.15,4.15,0.85));+#745 = SURFACE_CURVE('',#746,(#750,#757),.PCURVE_S1.);+#746 = LINE('',#747,#748);+#747 = CARTESIAN_POINT('',(-5.15,4.15,0.15));+#748 = VECTOR('',#749,1.);+#749 = DIRECTION('',(0.,0.,1.));+#750 = PCURVE('',#370,#751);+#751 = DEFINITIONAL_REPRESENTATION('',(#752),#756);+#752 = LINE('',#753,#754);+#753 = CARTESIAN_POINT('',(0.,0.));+#754 = VECTOR('',#755,1.);+#755 = DIRECTION('',(0.,-1.));+#756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#757 = PCURVE('',#758,#763);+#758 = PLANE('',#759);+#759 = AXIS2_PLACEMENT_3D('',#760,#761,#762);+#760 = CARTESIAN_POINT('',(-4.15,5.15,0.15));+#761 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#762 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#763 = DEFINITIONAL_REPRESENTATION('',(#764),#768);+#764 = LINE('',#765,#766);+#765 = CARTESIAN_POINT('',(1.414213562373,0.));+#766 = VECTOR('',#767,1.);+#767 = DIRECTION('',(0.,-1.));+#768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#769 = ORIENTED_EDGE('',*,*,#770,.T.);+#770 = EDGE_CURVE('',#743,#771,#773,.T.);+#771 = VERTEX_POINT('',#772);+#772 = CARTESIAN_POINT('',(-5.15,0.719374728497,0.85));+#773 = SURFACE_CURVE('',#774,(#778,#785),.PCURVE_S1.);+#774 = LINE('',#775,#776);+#775 = CARTESIAN_POINT('',(-5.15,5.15,0.85));+#776 = VECTOR('',#777,1.);+#777 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#778 = PCURVE('',#370,#779);+#779 = DEFINITIONAL_REPRESENTATION('',(#780),#784);+#780 = LINE('',#781,#782);+#781 = CARTESIAN_POINT('',(-1.,-0.7));+#782 = VECTOR('',#783,1.);+#783 = DIRECTION('',(1.,0.));+#784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#785 = PCURVE('',#786,#791);+#786 = PLANE('',#787);+#787 = AXIS2_PLACEMENT_3D('',#788,#789,#790);+#788 = CARTESIAN_POINT('',(6.306931015609E-16,5.15,0.85));+#789 = DIRECTION('',(0.,0.,1.));+#790 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#791 = DEFINITIONAL_REPRESENTATION('',(#792),#796);+#792 = LINE('',#793,#794);+#793 = CARTESIAN_POINT('',(5.15,6.306931015607E-16));+#794 = VECTOR('',#795,1.);+#795 = DIRECTION('',(0.,1.));+#796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#797 = ORIENTED_EDGE('',*,*,#798,.T.);+#798 = EDGE_CURVE('',#771,#353,#799,.T.);+#799 = SURFACE_CURVE('',#800,(#804,#811),.PCURVE_S1.);+#800 = LINE('',#801,#802);+#801 = CARTESIAN_POINT('',(-5.15,0.719374728497,0.65));+#802 = VECTOR('',#803,1.);+#803 = DIRECTION('',(0.,0.,-1.));+#804 = PCURVE('',#370,#805);+#805 = DEFINITIONAL_REPRESENTATION('',(#806),#810);+#806 = LINE('',#807,#808);+#807 = CARTESIAN_POINT('',(3.430625271503,-0.5));+#808 = VECTOR('',#809,1.);+#809 = DIRECTION('',(-0.,1.));+#810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#811 = PCURVE('',#568,#812);+#812 = DEFINITIONAL_REPRESENTATION('',(#813),#817);+#813 = LINE('',#814,#815);+#814 = CARTESIAN_POINT('',(0.138786407973,0.));+#815 = VECTOR('',#816,1.);+#816 = DIRECTION('',(0.,1.));+#817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#818 = ORIENTED_EDGE('',*,*,#352,.T.);+#819 = ORIENTED_EDGE('',*,*,#820,.F.);+#820 = EDGE_CURVE('',#821,#355,#823,.T.);+#821 = VERTEX_POINT('',#822);+#822 = CARTESIAN_POINT('',(-5.15,-0.719374728497,0.85));+#823 = SURFACE_CURVE('',#824,(#828,#835),.PCURVE_S1.);+#824 = LINE('',#825,#826);+#825 = CARTESIAN_POINT('',(-5.15,-0.719374728497,0.65));+#826 = VECTOR('',#827,1.);+#827 = DIRECTION('',(0.,0.,-1.));+#828 = PCURVE('',#370,#829);+#829 = DEFINITIONAL_REPRESENTATION('',(#830),#834);+#830 = LINE('',#831,#832);+#831 = CARTESIAN_POINT('',(4.869374728497,-0.5));+#832 = VECTOR('',#833,1.);+#833 = DIRECTION('',(-0.,1.));+#834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#835 = PCURVE('',#399,#836);+#836 = DEFINITIONAL_REPRESENTATION('',(#837),#841);+#837 = LINE('',#838,#839);+#838 = CARTESIAN_POINT('',(6.144398899206,0.));+#839 = VECTOR('',#840,1.);+#840 = DIRECTION('',(0.,1.));+#841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#842 = ORIENTED_EDGE('',*,*,#843,.T.);+#843 = EDGE_CURVE('',#821,#844,#846,.T.);+#844 = VERTEX_POINT('',#845);+#845 = CARTESIAN_POINT('',(-5.15,-4.15,0.85));+#846 = SURFACE_CURVE('',#847,(#851,#858),.PCURVE_S1.);+#847 = LINE('',#848,#849);+#848 = CARTESIAN_POINT('',(-5.15,5.15,0.85));+#849 = VECTOR('',#850,1.);+#850 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#851 = PCURVE('',#370,#852);+#852 = DEFINITIONAL_REPRESENTATION('',(#853),#857);+#853 = LINE('',#854,#855);+#854 = CARTESIAN_POINT('',(-1.,-0.7));+#855 = VECTOR('',#856,1.);+#856 = DIRECTION('',(1.,0.));+#857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#858 = PCURVE('',#859,#864);+#859 = PLANE('',#860);+#860 = AXIS2_PLACEMENT_3D('',#861,#862,#863);+#861 = CARTESIAN_POINT('',(6.306931015609E-16,5.15,0.85));+#862 = DIRECTION('',(0.,0.,1.));+#863 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#864 = DEFINITIONAL_REPRESENTATION('',(#865),#869);+#865 = LINE('',#866,#867);+#866 = CARTESIAN_POINT('',(5.15,6.306931015607E-16));+#867 = VECTOR('',#868,1.);+#868 = DIRECTION('',(0.,1.));+#869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#870 = ORIENTED_EDGE('',*,*,#871,.F.);+#871 = EDGE_CURVE('',#872,#844,#874,.T.);+#872 = VERTEX_POINT('',#873);+#873 = CARTESIAN_POINT('',(-5.15,-4.15,0.15));+#874 = SURFACE_CURVE('',#875,(#879,#886),.PCURVE_S1.);+#875 = LINE('',#876,#877);+#876 = CARTESIAN_POINT('',(-5.15,-4.15,0.15));+#877 = VECTOR('',#878,1.);+#878 = DIRECTION('',(0.,0.,1.));+#879 = PCURVE('',#370,#880);+#880 = DEFINITIONAL_REPRESENTATION('',(#881),#885);+#881 = LINE('',#882,#883);+#882 = CARTESIAN_POINT('',(8.3,0.));+#883 = VECTOR('',#884,1.);+#884 = DIRECTION('',(0.,-1.));+#885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#886 = PCURVE('',#887,#892);+#887 = PLANE('',#888);+#888 = AXIS2_PLACEMENT_3D('',#889,#890,#891);+#889 = CARTESIAN_POINT('',(-5.15,-4.15,0.15));+#890 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#891 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#892 = DEFINITIONAL_REPRESENTATION('',(#893),#897);+#893 = LINE('',#894,#895);+#894 = CARTESIAN_POINT('',(0.,0.));+#895 = VECTOR('',#896,1.);+#896 = DIRECTION('',(0.,-1.));+#897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#898 = ORIENTED_EDGE('',*,*,#899,.F.);+#899 = EDGE_CURVE('',#900,#872,#902,.T.);+#900 = VERTEX_POINT('',#901);+#901 = CARTESIAN_POINT('',(-5.15,-0.45,0.15));+#902 = SURFACE_CURVE('',#903,(#907,#914),.PCURVE_S1.);+#903 = LINE('',#904,#905);+#904 = CARTESIAN_POINT('',(-5.15,4.15,0.15));+#905 = VECTOR('',#906,1.);+#906 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#907 = PCURVE('',#370,#908);+#908 = DEFINITIONAL_REPRESENTATION('',(#909),#913);+#909 = LINE('',#910,#911);+#910 = CARTESIAN_POINT('',(0.,0.));+#911 = VECTOR('',#912,1.);+#912 = DIRECTION('',(1.,0.));+#913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#914 = PCURVE('',#730,#915);+#915 = DEFINITIONAL_REPRESENTATION('',(#916),#920);+#916 = LINE('',#917,#918);+#917 = CARTESIAN_POINT('',(5.311080870099,-4.15));+#918 = VECTOR('',#919,1.);+#919 = DIRECTION('',(0.,1.));+#920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#921 = ORIENTED_EDGE('',*,*,#922,.F.);+#922 = EDGE_CURVE('',#715,#900,#923,.T.);+#923 = SURFACE_CURVE('',#924,(#928,#935),.PCURVE_S1.);+#924 = LINE('',#925,#926);+#925 = CARTESIAN_POINT('',(-5.15,4.15,0.15));+#926 = VECTOR('',#927,1.);+#927 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#928 = PCURVE('',#370,#929);+#929 = DEFINITIONAL_REPRESENTATION('',(#930),#934);+#930 = LINE('',#931,#932);+#931 = CARTESIAN_POINT('',(0.,0.));+#932 = VECTOR('',#933,1.);+#933 = DIRECTION('',(1.,0.));+#934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#935 = PCURVE('',#936,#941);+#936 = PLANE('',#937);+#937 = AXIS2_PLACEMENT_3D('',#938,#939,#940);+#938 = CARTESIAN_POINT('',(-4.251343967025,5.206394781291E-16,0.15));+#939 = DIRECTION('',(0.,0.,1.));+#940 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#941 = DEFINITIONAL_REPRESENTATION('',(#942),#946);+#942 = LINE('',#943,#944);+#943 = CARTESIAN_POINT('',(0.898656032975,-4.15));+#944 = VECTOR('',#945,1.);+#945 = DIRECTION('',(0.,1.));+#946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#947 = ADVANCED_FACE('',(#948),#568,.F.);+#948 = FACE_BOUND('',#949,.F.);+#949 = EDGE_LOOP('',(#950,#973,#974,#975));+#950 = ORIENTED_EDGE('',*,*,#951,.T.);+#951 = EDGE_CURVE('',#952,#526,#954,.T.);+#952 = VERTEX_POINT('',#953);+#953 = CARTESIAN_POINT('',(-0.719374728497,5.15,0.85));+#954 = SURFACE_CURVE('',#955,(#959,#966),.PCURVE_S1.);+#955 = LINE('',#956,#957);+#956 = CARTESIAN_POINT('',(-0.719374728497,5.15,0.65));+#957 = VECTOR('',#958,1.);+#958 = DIRECTION('',(0.,0.,-1.));+#959 = PCURVE('',#568,#960);+#960 = DEFINITIONAL_REPRESENTATION('',(#961),#965);+#961 = LINE('',#962,#963);+#962 = CARTESIAN_POINT('',(1.432009918821,0.));+#963 = VECTOR('',#964,1.);+#964 = DIRECTION('',(0.,1.));+#965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#966 = PCURVE('',#541,#967);+#967 = DEFINITIONAL_REPRESENTATION('',(#968),#972);+#968 = LINE('',#969,#970);+#969 = CARTESIAN_POINT('',(5.869374728497,-0.5));+#970 = VECTOR('',#971,1.);+#971 = DIRECTION('',(0.,1.));+#972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#973 = ORIENTED_EDGE('',*,*,#553,.T.);+#974 = ORIENTED_EDGE('',*,*,#798,.F.);+#975 = ORIENTED_EDGE('',*,*,#976,.T.);+#976 = EDGE_CURVE('',#771,#952,#977,.T.);+#977 = SURFACE_CURVE('',#978,(#983,#990),.PCURVE_S1.);+#978 = CIRCLE('',#979,5.2);+#979 = AXIS2_PLACEMENT_3D('',#980,#981,#982);+#980 = CARTESIAN_POINT('',(0.,0.,0.85));+#981 = DIRECTION('',(0.,0.,-1.));+#982 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#983 = PCURVE('',#568,#984);+#984 = DEFINITIONAL_REPRESENTATION('',(#985),#989);+#985 = LINE('',#986,#987);+#986 = CARTESIAN_POINT('',(0.,-0.2));+#987 = VECTOR('',#988,1.);+#988 = DIRECTION('',(1.,0.));+#989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#990 = PCURVE('',#786,#991);+#991 = DEFINITIONAL_REPRESENTATION('',(#992),#1000);+#992 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#993,#994,#995,#996,#997,#998+,#999),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+    -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+  '') );+#993 = CARTESIAN_POINT('',(5.2,5.15));+#994 = CARTESIAN_POINT('',(5.2,-3.856664199358));+#995 = CARTESIAN_POINT('',(-2.6,0.646667900321));+#996 = CARTESIAN_POINT('',(-10.4,5.15));+#997 = CARTESIAN_POINT('',(-2.6,9.653332099679));+#998 = CARTESIAN_POINT('',(5.2,14.156664199358));+#999 = CARTESIAN_POINT('',(5.2,5.15));+#1000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1001 = ADVANCED_FACE('',(#1002),#399,.F.);+#1002 = FACE_BOUND('',#1003,.F.);+#1003 = EDGE_LOOP('',(#1004,#1027,#1053,#1054));+#1004 = ORIENTED_EDGE('',*,*,#1005,.F.);+#1005 = EDGE_CURVE('',#1006,#383,#1008,.T.);+#1006 = VERTEX_POINT('',#1007);+#1007 = CARTESIAN_POINT('',(-0.719374728497,-5.15,0.85));+#1008 = SURFACE_CURVE('',#1009,(#1013,#1020),.PCURVE_S1.);+#1009 = LINE('',#1010,#1011);+#1010 = CARTESIAN_POINT('',(-0.719374728497,-5.15,0.65));+#1011 = VECTOR('',#1012,1.);+#1012 = DIRECTION('',(0.,0.,-1.));+#1013 = PCURVE('',#399,#1014);+#1014 = DEFINITIONAL_REPRESENTATION('',(#1015),#1019);+#1015 = LINE('',#1016,#1017);+#1016 = CARTESIAN_POINT('',(4.851175388358,0.));+#1017 = VECTOR('',#1018,1.);+#1018 = DIRECTION('',(0.,1.));+#1019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1020 = PCURVE('',#427,#1021);+#1021 = DEFINITIONAL_REPRESENTATION('',(#1022),#1026);+#1022 = LINE('',#1023,#1024);+#1023 = CARTESIAN_POINT('',(3.430625271503,-0.5));+#1024 = VECTOR('',#1025,1.);+#1025 = DIRECTION('',(0.,1.));+#1026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1027 = ORIENTED_EDGE('',*,*,#1028,.T.);+#1028 = EDGE_CURVE('',#1006,#821,#1029,.T.);+#1029 = SURFACE_CURVE('',#1030,(#1035,#1042),.PCURVE_S1.);+#1030 = CIRCLE('',#1031,5.2);+#1031 = AXIS2_PLACEMENT_3D('',#1032,#1033,#1034);+#1032 = CARTESIAN_POINT('',(0.,0.,0.85));+#1033 = DIRECTION('',(0.,0.,-1.));+#1034 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1035 = PCURVE('',#399,#1036);+#1036 = DEFINITIONAL_REPRESENTATION('',(#1037),#1041);+#1037 = LINE('',#1038,#1039);+#1038 = CARTESIAN_POINT('',(0.,-0.2));+#1039 = VECTOR('',#1040,1.);+#1040 = DIRECTION('',(1.,0.));+#1041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1042 = PCURVE('',#859,#1043);+#1043 = DEFINITIONAL_REPRESENTATION('',(#1044),#1052);+#1044 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1045,#1046,#1047,#1048,+#1049,#1050,#1051),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1045 = CARTESIAN_POINT('',(5.2,5.15));+#1046 = CARTESIAN_POINT('',(5.2,-3.856664199358));+#1047 = CARTESIAN_POINT('',(-2.6,0.646667900321));+#1048 = CARTESIAN_POINT('',(-10.4,5.15));+#1049 = CARTESIAN_POINT('',(-2.6,9.653332099679));+#1050 = CARTESIAN_POINT('',(5.2,14.156664199358));+#1051 = CARTESIAN_POINT('',(5.2,5.15));+#1052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1053 = ORIENTED_EDGE('',*,*,#820,.T.);+#1054 = ORIENTED_EDGE('',*,*,#382,.T.);+#1055 = ADVANCED_FACE('',(#1056),#541,.F.);+#1056 = FACE_BOUND('',#1057,.F.);+#1057 = EDGE_LOOP('',(#1058,#1083,#1111,#1139,#1160,#1161,#1162,#1185));+#1058 = ORIENTED_EDGE('',*,*,#1059,.F.);+#1059 = EDGE_CURVE('',#1060,#1062,#1064,.T.);+#1060 = VERTEX_POINT('',#1061);+#1061 = CARTESIAN_POINT('',(4.75,5.15,0.15));+#1062 = VERTEX_POINT('',#1063);+#1063 = CARTESIAN_POINT('',(-4.15,5.15,0.15));+#1064 = SURFACE_CURVE('',#1065,(#1069,#1076),.PCURVE_S1.);+#1065 = LINE('',#1066,#1067);+#1066 = CARTESIAN_POINT('',(5.15,5.15,0.15));+#1067 = VECTOR('',#1068,1.);+#1068 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1069 = PCURVE('',#541,#1070);+#1070 = DEFINITIONAL_REPRESENTATION('',(#1071),#1075);+#1071 = LINE('',#1072,#1073);+#1072 = CARTESIAN_POINT('',(0.,0.));+#1073 = VECTOR('',#1074,1.);+#1074 = DIRECTION('',(1.,0.));+#1075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1076 = PCURVE('',#730,#1077);+#1077 = DEFINITIONAL_REPRESENTATION('',(#1078),#1082);+#1078 = LINE('',#1079,#1080);+#1079 = CARTESIAN_POINT('',(-4.988919129901,-5.15));+#1080 = VECTOR('',#1081,1.);+#1081 = DIRECTION('',(1.,0.));+#1082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1083 = ORIENTED_EDGE('',*,*,#1084,.T.);+#1084 = EDGE_CURVE('',#1060,#1085,#1087,.T.);+#1085 = VERTEX_POINT('',#1086);+#1086 = CARTESIAN_POINT('',(4.75,5.15,1.15));+#1087 = SURFACE_CURVE('',#1088,(#1092,#1099),.PCURVE_S1.);+#1088 = LINE('',#1089,#1090);+#1089 = CARTESIAN_POINT('',(4.75,5.15,0.15));+#1090 = VECTOR('',#1091,1.);+#1091 = DIRECTION('',(0.,0.,1.));+#1092 = PCURVE('',#541,#1093);+#1093 = DEFINITIONAL_REPRESENTATION('',(#1094),#1098);+#1094 = LINE('',#1095,#1096);+#1095 = CARTESIAN_POINT('',(0.4,0.));+#1096 = VECTOR('',#1097,1.);+#1097 = DIRECTION('',(0.,-1.));+#1098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1099 = PCURVE('',#1100,#1105);+#1100 = CYLINDRICAL_SURFACE('',#1101,0.4);+#1101 = AXIS2_PLACEMENT_3D('',#1102,#1103,#1104);+#1102 = CARTESIAN_POINT('',(4.75,4.75,0.15));+#1103 = DIRECTION('',(0.,0.,1.));+#1104 = DIRECTION('',(1.224646799147E-16,1.,-0.));+#1105 = DEFINITIONAL_REPRESENTATION('',(#1106),#1110);+#1106 = LINE('',#1107,#1108);+#1107 = CARTESIAN_POINT('',(6.28318530718,0.));+#1108 = VECTOR('',#1109,1.);+#1109 = DIRECTION('',(0.,1.));+#1110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1111 = ORIENTED_EDGE('',*,*,#1112,.T.);+#1112 = EDGE_CURVE('',#1085,#1113,#1115,.T.);+#1113 = VERTEX_POINT('',#1114);+#1114 = CARTESIAN_POINT('',(0.719374728497,5.15,1.15));+#1115 = SURFACE_CURVE('',#1116,(#1120,#1127),.PCURVE_S1.);+#1116 = LINE('',#1117,#1118);+#1117 = CARTESIAN_POINT('',(5.15,5.15,1.15));+#1118 = VECTOR('',#1119,1.);+#1119 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1120 = PCURVE('',#541,#1121);+#1121 = DEFINITIONAL_REPRESENTATION('',(#1122),#1126);+#1122 = LINE('',#1123,#1124);+#1123 = CARTESIAN_POINT('',(0.,-1.));+#1124 = VECTOR('',#1125,1.);+#1125 = DIRECTION('',(1.,0.));+#1126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1127 = PCURVE('',#1128,#1133);+#1128 = PLANE('',#1129);+#1129 = AXIS2_PLACEMENT_3D('',#1130,#1131,#1132);+#1130 = CARTESIAN_POINT('',(0.161080870099,-1.972671719701E-17,1.15));+#1131 = DIRECTION('',(0.,0.,1.));+#1132 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1133 = DEFINITIONAL_REPRESENTATION('',(#1134),#1138);+#1134 = LINE('',#1135,#1136);+#1135 = CARTESIAN_POINT('',(-4.988919129901,-5.15));+#1136 = VECTOR('',#1137,1.);+#1137 = DIRECTION('',(1.,0.));+#1138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1139 = ORIENTED_EDGE('',*,*,#1140,.T.);+#1140 = EDGE_CURVE('',#1113,#497,#1141,.T.);+#1141 = SURFACE_CURVE('',#1142,(#1146,#1153),.PCURVE_S1.);+#1142 = LINE('',#1143,#1144);+#1143 = CARTESIAN_POINT('',(0.719374728497,5.15,0.65));+#1144 = VECTOR('',#1145,1.);+#1145 = DIRECTION('',(0.,0.,-1.));+#1146 = PCURVE('',#541,#1147);+#1147 = DEFINITIONAL_REPRESENTATION('',(#1148),#1152);+#1148 = LINE('',#1149,#1150);+#1149 = CARTESIAN_POINT('',(4.430625271503,-0.5));+#1150 = VECTOR('',#1151,1.);+#1151 = DIRECTION('',(0.,1.));+#1152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1153 = PCURVE('',#513,#1154);+#1154 = DEFINITIONAL_REPRESENTATION('',(#1155),#1159);+#1155 = LINE('',#1156,#1157);+#1156 = CARTESIAN_POINT('',(1.709582734768,0.));+#1157 = VECTOR('',#1158,1.);+#1158 = DIRECTION('',(0.,1.));+#1159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1160 = ORIENTED_EDGE('',*,*,#525,.T.);+#1161 = ORIENTED_EDGE('',*,*,#951,.F.);+#1162 = ORIENTED_EDGE('',*,*,#1163,.T.);+#1163 = EDGE_CURVE('',#952,#1164,#1166,.T.);+#1164 = VERTEX_POINT('',#1165);+#1165 = CARTESIAN_POINT('',(-4.15,5.15,0.85));+#1166 = SURFACE_CURVE('',#1167,(#1171,#1178),.PCURVE_S1.);+#1167 = LINE('',#1168,#1169);+#1168 = CARTESIAN_POINT('',(6.306931015609E-16,5.15,0.85));+#1169 = VECTOR('',#1170,1.);+#1170 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1171 = PCURVE('',#541,#1172);+#1172 = DEFINITIONAL_REPRESENTATION('',(#1173),#1177);+#1173 = LINE('',#1174,#1175);+#1174 = CARTESIAN_POINT('',(5.15,-0.7));+#1175 = VECTOR('',#1176,1.);+#1176 = DIRECTION('',(1.,0.));+#1177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1178 = PCURVE('',#786,#1179);+#1179 = DEFINITIONAL_REPRESENTATION('',(#1180),#1184);+#1180 = LINE('',#1181,#1182);+#1181 = CARTESIAN_POINT('',(0.,0.));+#1182 = VECTOR('',#1183,1.);+#1183 = DIRECTION('',(1.,0.));+#1184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1185 = ORIENTED_EDGE('',*,*,#1186,.F.);+#1186 = EDGE_CURVE('',#1062,#1164,#1187,.T.);+#1187 = SURFACE_CURVE('',#1188,(#1192,#1199),.PCURVE_S1.);+#1188 = LINE('',#1189,#1190);+#1189 = CARTESIAN_POINT('',(-4.15,5.15,0.15));+#1190 = VECTOR('',#1191,1.);+#1191 = DIRECTION('',(0.,0.,1.));+#1192 = PCURVE('',#541,#1193);+#1193 = DEFINITIONAL_REPRESENTATION('',(#1194),#1198);+#1194 = LINE('',#1195,#1196);+#1195 = CARTESIAN_POINT('',(9.3,0.));+#1196 = VECTOR('',#1197,1.);+#1197 = DIRECTION('',(0.,-1.));+#1198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1199 = PCURVE('',#758,#1200);+#1200 = DEFINITIONAL_REPRESENTATION('',(#1201),#1205);+#1201 = LINE('',#1202,#1203);+#1202 = CARTESIAN_POINT('',(0.,0.));+#1203 = VECTOR('',#1204,1.);+#1204 = DIRECTION('',(0.,-1.));+#1205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1206 = ADVANCED_FACE('',(#1207),#427,.F.);+#1207 = FACE_BOUND('',#1208,.F.);+#1208 = EDGE_LOOP('',(#1209,#1239,#1262,#1285,#1306,#1307,#1308,#1331));+#1209 = ORIENTED_EDGE('',*,*,#1210,.F.);+#1210 = EDGE_CURVE('',#1211,#1213,#1215,.T.);+#1211 = VERTEX_POINT('',#1212);+#1212 = CARTESIAN_POINT('',(4.75,-5.15,0.15));+#1213 = VERTEX_POINT('',#1214);+#1214 = CARTESIAN_POINT('',(4.75,-5.15,1.15));+#1215 = SURFACE_CURVE('',#1216,(#1220,#1227),.PCURVE_S1.);+#1216 = LINE('',#1217,#1218);+#1217 = CARTESIAN_POINT('',(4.75,-5.15,0.15));+#1218 = VECTOR('',#1219,1.);+#1219 = DIRECTION('',(0.,0.,1.));+#1220 = PCURVE('',#427,#1221);+#1221 = DEFINITIONAL_REPRESENTATION('',(#1222),#1226);+#1222 = LINE('',#1223,#1224);+#1223 = CARTESIAN_POINT('',(8.9,0.));+#1224 = VECTOR('',#1225,1.);+#1225 = DIRECTION('',(0.,-1.));+#1226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1227 = PCURVE('',#1228,#1233);+#1228 = CYLINDRICAL_SURFACE('',#1229,0.4);+#1229 = AXIS2_PLACEMENT_3D('',#1230,#1231,#1232);+#1230 = CARTESIAN_POINT('',(4.75,-4.75,0.15));+#1231 = DIRECTION('',(0.,0.,1.));+#1232 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#1233 = DEFINITIONAL_REPRESENTATION('',(#1234),#1238);+#1234 = LINE('',#1235,#1236);+#1235 = CARTESIAN_POINT('',(4.712388980385,0.));+#1236 = VECTOR('',#1237,1.);+#1237 = DIRECTION('',(0.,1.));+#1238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1239 = ORIENTED_EDGE('',*,*,#1240,.F.);+#1240 = EDGE_CURVE('',#1241,#1211,#1243,.T.);+#1241 = VERTEX_POINT('',#1242);+#1242 = CARTESIAN_POINT('',(-4.15,-5.15,0.15));+#1243 = SURFACE_CURVE('',#1244,(#1248,#1255),.PCURVE_S1.);+#1244 = LINE('',#1245,#1246);+#1245 = CARTESIAN_POINT('',(-4.15,-5.15,0.15));+#1246 = VECTOR('',#1247,1.);+#1247 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#1248 = PCURVE('',#427,#1249);+#1249 = DEFINITIONAL_REPRESENTATION('',(#1250),#1254);+#1250 = LINE('',#1251,#1252);+#1251 = CARTESIAN_POINT('',(0.,0.));+#1252 = VECTOR('',#1253,1.);+#1253 = DIRECTION('',(1.,0.));+#1254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1255 = PCURVE('',#730,#1256);+#1256 = DEFINITIONAL_REPRESENTATION('',(#1257),#1261);+#1257 = LINE('',#1258,#1259);+#1258 = CARTESIAN_POINT('',(4.311080870099,5.15));+#1259 = VECTOR('',#1260,1.);+#1260 = DIRECTION('',(-1.,0.));+#1261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1262 = ORIENTED_EDGE('',*,*,#1263,.T.);+#1263 = EDGE_CURVE('',#1241,#1264,#1266,.T.);+#1264 = VERTEX_POINT('',#1265);+#1265 = CARTESIAN_POINT('',(-4.15,-5.15,0.85));+#1266 = SURFACE_CURVE('',#1267,(#1271,#1278),.PCURVE_S1.);+#1267 = LINE('',#1268,#1269);+#1268 = CARTESIAN_POINT('',(-4.15,-5.15,0.15));+#1269 = VECTOR('',#1270,1.);+#1270 = DIRECTION('',(0.,0.,1.));+#1271 = PCURVE('',#427,#1272);+#1272 = DEFINITIONAL_REPRESENTATION('',(#1273),#1277);+#1273 = LINE('',#1274,#1275);+#1274 = CARTESIAN_POINT('',(0.,0.));+#1275 = VECTOR('',#1276,1.);+#1276 = DIRECTION('',(0.,-1.));+#1277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1278 = PCURVE('',#887,#1279);+#1279 = DEFINITIONAL_REPRESENTATION('',(#1280),#1284);+#1280 = LINE('',#1281,#1282);+#1281 = CARTESIAN_POINT('',(1.414213562373,0.));+#1282 = VECTOR('',#1283,1.);+#1283 = DIRECTION('',(0.,-1.));+#1284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1285 = ORIENTED_EDGE('',*,*,#1286,.F.);+#1286 = EDGE_CURVE('',#1006,#1264,#1287,.T.);+#1287 = SURFACE_CURVE('',#1288,(#1292,#1299),.PCURVE_S1.);+#1288 = LINE('',#1289,#1290);+#1289 = CARTESIAN_POINT('',(-6.306931015609E-16,-5.15,0.85));+#1290 = VECTOR('',#1291,1.);+#1291 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1292 = PCURVE('',#427,#1293);+#1293 = DEFINITIONAL_REPRESENTATION('',(#1294),#1298);+#1294 = LINE('',#1295,#1296);+#1295 = CARTESIAN_POINT('',(4.15,-0.7));+#1296 = VECTOR('',#1297,1.);+#1297 = DIRECTION('',(-1.,0.));+#1298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1299 = PCURVE('',#859,#1300);+#1300 = DEFINITIONAL_REPRESENTATION('',(#1301),#1305);+#1301 = LINE('',#1302,#1303);+#1302 = CARTESIAN_POINT('',(3.898945024055E-28,10.3));+#1303 = VECTOR('',#1304,1.);+#1304 = DIRECTION('',(1.,0.));+#1305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1306 = ORIENTED_EDGE('',*,*,#1005,.T.);+#1307 = ORIENTED_EDGE('',*,*,#411,.T.);+#1308 = ORIENTED_EDGE('',*,*,#1309,.F.);+#1309 = EDGE_CURVE('',#1310,#412,#1312,.T.);+#1310 = VERTEX_POINT('',#1311);+#1311 = CARTESIAN_POINT('',(0.719374728497,-5.15,1.15));+#1312 = SURFACE_CURVE('',#1313,(#1317,#1324),.PCURVE_S1.);+#1313 = LINE('',#1314,#1315);+#1314 = CARTESIAN_POINT('',(0.719374728497,-5.15,0.65));+#1315 = VECTOR('',#1316,1.);+#1316 = DIRECTION('',(0.,0.,-1.));+#1317 = PCURVE('',#427,#1318);+#1318 = DEFINITIONAL_REPRESENTATION('',(#1319),#1323);+#1319 = LINE('',#1320,#1321);+#1320 = CARTESIAN_POINT('',(4.869374728497,-0.5));+#1321 = VECTOR('',#1322,1.);+#1322 = DIRECTION('',(0.,1.));+#1323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1324 = PCURVE('',#456,#1325);+#1325 = DEFINITIONAL_REPRESENTATION('',(#1326),#1330);+#1326 = LINE('',#1327,#1328);+#1327 = CARTESIAN_POINT('',(4.573602572411,0.));+#1328 = VECTOR('',#1329,1.);+#1329 = DIRECTION('',(0.,1.));+#1330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1331 = ORIENTED_EDGE('',*,*,#1332,.T.);+#1332 = EDGE_CURVE('',#1310,#1213,#1333,.T.);+#1333 = SURFACE_CURVE('',#1334,(#1338,#1345),.PCURVE_S1.);+#1334 = LINE('',#1335,#1336);+#1335 = CARTESIAN_POINT('',(-4.15,-5.15,1.15));+#1336 = VECTOR('',#1337,1.);+#1337 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#1338 = PCURVE('',#427,#1339);+#1339 = DEFINITIONAL_REPRESENTATION('',(#1340),#1344);+#1340 = LINE('',#1341,#1342);+#1341 = CARTESIAN_POINT('',(0.,-1.));+#1342 = VECTOR('',#1343,1.);+#1343 = DIRECTION('',(1.,0.));+#1344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1345 = PCURVE('',#1346,#1351);+#1346 = PLANE('',#1347);+#1347 = AXIS2_PLACEMENT_3D('',#1348,#1349,#1350);+#1348 = CARTESIAN_POINT('',(0.161080870099,-1.972671719701E-17,1.15));+#1349 = DIRECTION('',(0.,0.,1.));+#1350 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1351 = DEFINITIONAL_REPRESENTATION('',(#1352),#1356);+#1352 = LINE('',#1353,#1354);+#1353 = CARTESIAN_POINT('',(4.311080870099,5.15));+#1354 = VECTOR('',#1355,1.);+#1355 = DIRECTION('',(-1.,0.));+#1356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1357 = ADVANCED_FACE('',(#1358),#513,.F.);+#1358 = FACE_BOUND('',#1359,.F.);+#1359 = EDGE_LOOP('',(#1360,#1384,#1405,#1406));+#1360 = ORIENTED_EDGE('',*,*,#1361,.F.);+#1361 = EDGE_CURVE('',#1362,#1113,#1364,.T.);+#1362 = VERTEX_POINT('',#1363);+#1363 = CARTESIAN_POINT('',(5.15,0.719374728497,1.15));+#1364 = SURFACE_CURVE('',#1365,(#1370,#1377),.PCURVE_S1.);+#1365 = CIRCLE('',#1366,5.2);+#1366 = AXIS2_PLACEMENT_3D('',#1367,#1368,#1369);+#1367 = CARTESIAN_POINT('',(0.,0.,1.15));+#1368 = DIRECTION('',(0.,0.,1.));+#1369 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1370 = PCURVE('',#513,#1371);+#1371 = DEFINITIONAL_REPRESENTATION('',(#1372),#1376);+#1372 = LINE('',#1373,#1374);+#1373 = CARTESIAN_POINT('',(6.28318530718,-0.5));+#1374 = VECTOR('',#1375,1.);+#1375 = DIRECTION('',(-1.,0.));+#1376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1377 = PCURVE('',#1128,#1378);+#1378 = DEFINITIONAL_REPRESENTATION('',(#1379),#1383);+#1379 = CIRCLE('',#1380,5.2);+#1380 = AXIS2_PLACEMENT_2D('',#1381,#1382);+#1381 = CARTESIAN_POINT('',(0.161080870099,4.540264288096E-29));+#1382 = DIRECTION('',(1.,0.));+#1383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1384 = ORIENTED_EDGE('',*,*,#1385,.T.);+#1385 = EDGE_CURVE('',#1362,#469,#1386,.T.);+#1386 = SURFACE_CURVE('',#1387,(#1391,#1398),.PCURVE_S1.);+#1387 = LINE('',#1388,#1389);+#1388 = CARTESIAN_POINT('',(5.15,0.719374728497,0.65));+#1389 = VECTOR('',#1390,1.);+#1390 = DIRECTION('',(0.,0.,-1.));+#1391 = PCURVE('',#513,#1392);+#1392 = DEFINITIONAL_REPRESENTATION('',(#1393),#1397);+#1393 = LINE('',#1394,#1395);+#1394 = CARTESIAN_POINT('',(3.002806245616,0.));+#1395 = VECTOR('',#1396,1.);+#1396 = DIRECTION('',(0.,1.));+#1397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1398 = PCURVE('',#484,#1399);+#1399 = DEFINITIONAL_REPRESENTATION('',(#1400),#1404);+#1400 = LINE('',#1401,#1402);+#1401 = CARTESIAN_POINT('',(5.869374728497,-0.5));+#1402 = VECTOR('',#1403,1.);+#1403 = DIRECTION('',(0.,1.));+#1404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1405 = ORIENTED_EDGE('',*,*,#496,.T.);+#1406 = ORIENTED_EDGE('',*,*,#1140,.F.);+#1407 = ADVANCED_FACE('',(#1408),#456,.F.);+#1408 = FACE_BOUND('',#1409,.F.);+#1409 = EDGE_LOOP('',(#1410,#1433,#1455,#1456));+#1410 = ORIENTED_EDGE('',*,*,#1411,.F.);+#1411 = EDGE_CURVE('',#1412,#440,#1414,.T.);+#1412 = VERTEX_POINT('',#1413);+#1413 = CARTESIAN_POINT('',(5.15,-0.719374728497,1.15));+#1414 = SURFACE_CURVE('',#1415,(#1419,#1426),.PCURVE_S1.);+#1415 = LINE('',#1416,#1417);+#1416 = CARTESIAN_POINT('',(5.15,-0.719374728497,0.65));+#1417 = VECTOR('',#1418,1.);+#1418 = DIRECTION('',(0.,0.,-1.));+#1419 = PCURVE('',#456,#1420);+#1420 = DEFINITIONAL_REPRESENTATION('',(#1421),#1425);+#1421 = LINE('',#1422,#1423);+#1422 = CARTESIAN_POINT('',(3.280379061563,0.));+#1423 = VECTOR('',#1424,1.);+#1424 = DIRECTION('',(0.,1.));+#1425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1426 = PCURVE('',#484,#1427);+#1427 = DEFINITIONAL_REPRESENTATION('',(#1428),#1432);+#1428 = LINE('',#1429,#1430);+#1429 = CARTESIAN_POINT('',(4.430625271503,-0.5));+#1430 = VECTOR('',#1431,1.);+#1431 = DIRECTION('',(0.,1.));+#1432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1433 = ORIENTED_EDGE('',*,*,#1434,.F.);+#1434 = EDGE_CURVE('',#1310,#1412,#1435,.T.);+#1435 = SURFACE_CURVE('',#1436,(#1441,#1448),.PCURVE_S1.);+#1436 = CIRCLE('',#1437,5.2);+#1437 = AXIS2_PLACEMENT_3D('',#1438,#1439,#1440);+#1438 = CARTESIAN_POINT('',(0.,0.,1.15));+#1439 = DIRECTION('',(0.,0.,1.));+#1440 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1441 = PCURVE('',#456,#1442);+#1442 = DEFINITIONAL_REPRESENTATION('',(#1443),#1447);+#1443 = LINE('',#1444,#1445);+#1444 = CARTESIAN_POINT('',(6.28318530718,-0.5));+#1445 = VECTOR('',#1446,1.);+#1446 = DIRECTION('',(-1.,0.));+#1447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1448 = PCURVE('',#1346,#1449);+#1449 = DEFINITIONAL_REPRESENTATION('',(#1450),#1454);+#1450 = CIRCLE('',#1451,5.2);+#1451 = AXIS2_PLACEMENT_2D('',#1452,#1453);+#1452 = CARTESIAN_POINT('',(0.161080870099,4.540264288096E-29));+#1453 = DIRECTION('',(1.,0.));+#1454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1455 = ORIENTED_EDGE('',*,*,#1309,.T.);+#1456 = ORIENTED_EDGE('',*,*,#439,.T.);+#1457 = ADVANCED_FACE('',(#1458),#484,.F.);+#1458 = FACE_BOUND('',#1459,.F.);+#1459 = EDGE_LOOP('',(#1460,#1485,#1508,#1529,#1530,#1531,#1532,#1555,+    #1578,#1601));+#1460 = ORIENTED_EDGE('',*,*,#1461,.F.);+#1461 = EDGE_CURVE('',#1462,#1464,#1466,.T.);+#1462 = VERTEX_POINT('',#1463);+#1463 = CARTESIAN_POINT('',(5.15,-4.75,0.15));+#1464 = VERTEX_POINT('',#1465);+#1465 = CARTESIAN_POINT('',(5.15,-0.45,0.15));+#1466 = SURFACE_CURVE('',#1467,(#1471,#1478),.PCURVE_S1.);+#1467 = LINE('',#1468,#1469);+#1468 = CARTESIAN_POINT('',(5.15,-5.15,0.15));+#1469 = VECTOR('',#1470,1.);+#1470 = DIRECTION('',(1.224646799147E-16,1.,0.));+#1471 = PCURVE('',#484,#1472);+#1472 = DEFINITIONAL_REPRESENTATION('',(#1473),#1477);+#1473 = LINE('',#1474,#1475);+#1474 = CARTESIAN_POINT('',(0.,0.));+#1475 = VECTOR('',#1476,1.);+#1476 = DIRECTION('',(1.,0.));+#1477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1478 = PCURVE('',#730,#1479);+#1479 = DEFINITIONAL_REPRESENTATION('',(#1480),#1484);+#1480 = LINE('',#1481,#1482);+#1481 = CARTESIAN_POINT('',(-4.988919129901,5.15));+#1482 = VECTOR('',#1483,1.);+#1483 = DIRECTION('',(0.,-1.));+#1484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1485 = ORIENTED_EDGE('',*,*,#1486,.T.);+#1486 = EDGE_CURVE('',#1462,#1487,#1489,.T.);+#1487 = VERTEX_POINT('',#1488);+#1488 = CARTESIAN_POINT('',(5.15,-4.75,1.15));+#1489 = SURFACE_CURVE('',#1490,(#1494,#1501),.PCURVE_S1.);+#1490 = LINE('',#1491,#1492);+#1491 = CARTESIAN_POINT('',(5.15,-4.75,0.15));+#1492 = VECTOR('',#1493,1.);+#1493 = DIRECTION('',(0.,0.,1.));+#1494 = PCURVE('',#484,#1495);+#1495 = DEFINITIONAL_REPRESENTATION('',(#1496),#1500);+#1496 = LINE('',#1497,#1498);+#1497 = CARTESIAN_POINT('',(0.4,0.));+#1498 = VECTOR('',#1499,1.);+#1499 = DIRECTION('',(0.,-1.));+#1500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1501 = PCURVE('',#1228,#1502);+#1502 = DEFINITIONAL_REPRESENTATION('',(#1503),#1507);+#1503 = LINE('',#1504,#1505);+#1504 = CARTESIAN_POINT('',(6.28318530718,0.));+#1505 = VECTOR('',#1506,1.);+#1506 = DIRECTION('',(0.,1.));+#1507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1508 = ORIENTED_EDGE('',*,*,#1509,.T.);+#1509 = EDGE_CURVE('',#1487,#1412,#1510,.T.);+#1510 = SURFACE_CURVE('',#1511,(#1515,#1522),.PCURVE_S1.);+#1511 = LINE('',#1512,#1513);+#1512 = CARTESIAN_POINT('',(5.15,-5.15,1.15));+#1513 = VECTOR('',#1514,1.);+#1514 = DIRECTION('',(1.224646799147E-16,1.,0.));+#1515 = PCURVE('',#484,#1516);+#1516 = DEFINITIONAL_REPRESENTATION('',(#1517),#1521);+#1517 = LINE('',#1518,#1519);+#1518 = CARTESIAN_POINT('',(0.,-1.));+#1519 = VECTOR('',#1520,1.);+#1520 = DIRECTION('',(1.,0.));+#1521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1522 = PCURVE('',#1346,#1523);+#1523 = DEFINITIONAL_REPRESENTATION('',(#1524),#1528);+#1524 = LINE('',#1525,#1526);+#1525 = CARTESIAN_POINT('',(-4.988919129901,5.15));+#1526 = VECTOR('',#1527,1.);+#1527 = DIRECTION('',(0.,-1.));+#1528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1529 = ORIENTED_EDGE('',*,*,#1411,.T.);+#1530 = ORIENTED_EDGE('',*,*,#468,.T.);+#1531 = ORIENTED_EDGE('',*,*,#1385,.F.);+#1532 = ORIENTED_EDGE('',*,*,#1533,.T.);+#1533 = EDGE_CURVE('',#1362,#1534,#1536,.T.);+#1534 = VERTEX_POINT('',#1535);+#1535 = CARTESIAN_POINT('',(5.15,4.75,1.15));+#1536 = SURFACE_CURVE('',#1537,(#1541,#1548),.PCURVE_S1.);+#1537 = LINE('',#1538,#1539);+#1538 = CARTESIAN_POINT('',(5.15,-5.15,1.15));+#1539 = VECTOR('',#1540,1.);+#1540 = DIRECTION('',(1.224646799147E-16,1.,0.));+#1541 = PCURVE('',#484,#1542);+#1542 = DEFINITIONAL_REPRESENTATION('',(#1543),#1547);+#1543 = LINE('',#1544,#1545);+#1544 = CARTESIAN_POINT('',(0.,-1.));+#1545 = VECTOR('',#1546,1.);+#1546 = DIRECTION('',(1.,0.));+#1547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1548 = PCURVE('',#1128,#1549);+#1549 = DEFINITIONAL_REPRESENTATION('',(#1550),#1554);+#1550 = LINE('',#1551,#1552);+#1551 = CARTESIAN_POINT('',(-4.988919129901,5.15));+#1552 = VECTOR('',#1553,1.);+#1553 = DIRECTION('',(0.,-1.));+#1554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1555 = ORIENTED_EDGE('',*,*,#1556,.F.);+#1556 = EDGE_CURVE('',#1557,#1534,#1559,.T.);+#1557 = VERTEX_POINT('',#1558);+#1558 = CARTESIAN_POINT('',(5.15,4.75,0.15));+#1559 = SURFACE_CURVE('',#1560,(#1564,#1571),.PCURVE_S1.);+#1560 = LINE('',#1561,#1562);+#1561 = CARTESIAN_POINT('',(5.15,4.75,0.15));+#1562 = VECTOR('',#1563,1.);+#1563 = DIRECTION('',(0.,0.,1.));+#1564 = PCURVE('',#484,#1565);+#1565 = DEFINITIONAL_REPRESENTATION('',(#1566),#1570);+#1566 = LINE('',#1567,#1568);+#1567 = CARTESIAN_POINT('',(9.9,0.));+#1568 = VECTOR('',#1569,1.);+#1569 = DIRECTION('',(0.,-1.));+#1570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1571 = PCURVE('',#1100,#1572);+#1572 = DEFINITIONAL_REPRESENTATION('',(#1573),#1577);+#1573 = LINE('',#1574,#1575);+#1574 = CARTESIAN_POINT('',(4.712388980385,0.));+#1575 = VECTOR('',#1576,1.);+#1576 = DIRECTION('',(0.,1.));+#1577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1578 = ORIENTED_EDGE('',*,*,#1579,.F.);+#1579 = EDGE_CURVE('',#1580,#1557,#1582,.T.);+#1580 = VERTEX_POINT('',#1581);+#1581 = CARTESIAN_POINT('',(5.15,0.45,0.15));+#1582 = SURFACE_CURVE('',#1583,(#1587,#1594),.PCURVE_S1.);+#1583 = LINE('',#1584,#1585);+#1584 = CARTESIAN_POINT('',(5.15,-5.15,0.15));+#1585 = VECTOR('',#1586,1.);+#1586 = DIRECTION('',(1.224646799147E-16,1.,0.));+#1587 = PCURVE('',#484,#1588);+#1588 = DEFINITIONAL_REPRESENTATION('',(#1589),#1593);+#1589 = LINE('',#1590,#1591);+#1590 = CARTESIAN_POINT('',(0.,0.));+#1591 = VECTOR('',#1592,1.);+#1592 = DIRECTION('',(1.,0.));+#1593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1594 = PCURVE('',#730,#1595);+#1595 = DEFINITIONAL_REPRESENTATION('',(#1596),#1600);+#1596 = LINE('',#1597,#1598);+#1597 = CARTESIAN_POINT('',(-4.988919129901,5.15));+#1598 = VECTOR('',#1599,1.);+#1599 = DIRECTION('',(0.,-1.));+#1600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1601 = ORIENTED_EDGE('',*,*,#1602,.F.);+#1602 = EDGE_CURVE('',#1464,#1580,#1603,.T.);+#1603 = SURFACE_CURVE('',#1604,(#1608,#1615),.PCURVE_S1.);+#1604 = LINE('',#1605,#1606);+#1605 = CARTESIAN_POINT('',(5.15,-5.15,0.15));+#1606 = VECTOR('',#1607,1.);+#1607 = DIRECTION('',(1.224646799147E-16,1.,0.));+#1608 = PCURVE('',#484,#1609);+#1609 = DEFINITIONAL_REPRESENTATION('',(#1610),#1614);+#1610 = LINE('',#1611,#1612);+#1611 = CARTESIAN_POINT('',(0.,0.));+#1612 = VECTOR('',#1613,1.);+#1613 = DIRECTION('',(1.,0.));+#1614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1615 = PCURVE('',#1616,#1621);+#1616 = PLANE('',#1617);+#1617 = AXIS2_PLACEMENT_3D('',#1618,#1619,#1620);+#1618 = CARTESIAN_POINT('',(4.251343967025,-1.041278956258E-15,0.15));+#1619 = DIRECTION('',(0.,0.,1.));+#1620 = DIRECTION('',(1.,-2.449293598295E-16,0.));+#1621 = DEFINITIONAL_REPRESENTATION('',(#1622),#1626);+#1622 = LINE('',#1623,#1624);+#1623 = CARTESIAN_POINT('',(0.898656032975,-5.15));+#1624 = VECTOR('',#1625,1.);+#1625 = DIRECTION('',(-1.224646799148E-16,1.));+#1626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1627 = ADVANCED_FACE('',(#1628),#659,.T.);+#1628 = FACE_BOUND('',#1629,.T.);+#1629 = EDGE_LOOP('',(#1630,#1653,#1712,#1713));+#1630 = ORIENTED_EDGE('',*,*,#1631,.T.);+#1631 = EDGE_CURVE('',#587,#1632,#1634,.T.);+#1632 = VERTEX_POINT('',#1633);+#1633 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,3.447722557505));+#1634 = SEAM_CURVE('',#1635,(#1639,#1646),.PCURVE_S1.);+#1635 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1636,#1637,#1638),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+31.415926535898),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.738548945876,1.)) REPRESENTATION_ITEM('') );+#1636 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+    3.397929597732));+#1637 = CARTESIAN_POINT('',(-5.,5.569295732177E-15,3.402079011046));+#1638 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,3.447722557505));+#1639 = PCURVE('',#659,#1640);+#1640 = DEFINITIONAL_REPRESENTATION('',(#1641),#1645);+#1641 = LINE('',#1642,#1643);+#1642 = CARTESIAN_POINT('',(7.292659403213E-14,0.));+#1643 = VECTOR('',#1644,1.);+#1644 = DIRECTION('',(1.,0.));+#1645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1646 = PCURVE('',#659,#1647);+#1647 = DEFINITIONAL_REPRESENTATION('',(#1648),#1652);+#1648 = LINE('',#1649,#1650);+#1649 = CARTESIAN_POINT('',(7.292659403213E-14,31.415926535898));+#1650 = VECTOR('',#1651,1.);+#1651 = DIRECTION('',(1.,0.));+#1652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1653 = ORIENTED_EDGE('',*,*,#1654,.T.);+#1654 = EDGE_CURVE('',#1632,#1632,#1655,.T.);+#1655 = SURFACE_CURVE('',#1656,(#1671,#1678),.PCURVE_S1.);+#1656 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#1657,#1658,#1659,#1660,+    #1661,#1662,#1663,#1664,#1665,#1666,#1667,#1668,#1669,#1670),+.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,13,13,1),(+    -31.41592653589,6.213111017846E-16,31.415926535898,62.831853071796),+.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999997,+    1.000000000006,0.99999999999,1.000000000011,0.99999999999,+    1.000000000008,0.999999999995,1.000000000002,0.999999999999,1.,1.)) +REPRESENTATION_ITEM('') );+#1657 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,3.447722557505));+#1658 = CARTESIAN_POINT('',(-5.000000000003,2.381651773528,+    3.447722557505));+#1659 = CARTESIAN_POINT('',(-3.769083784592,4.818226231739,+    3.447722557505));+#1660 = CARTESIAN_POINT('',(-1.236030571649,6.560480641771,+    3.447722557505));+#1661 = CARTESIAN_POINT('',(2.249772170804,6.828057715716,3.447722557505+    ));+#1662 = CARTESIAN_POINT('',(5.261090838752,4.971090302081,3.447722557505+    ));+#1663 = CARTESIAN_POINT('',(7.469576757507,2.260332741408,3.447722557505+    ));+#1664 = CARTESIAN_POINT('',(7.46957675755,-2.260332741457,3.447722557505+    ));+#1665 = CARTESIAN_POINT('',(5.261090838755,-4.971090301995,+    3.447722557505));+#1666 = CARTESIAN_POINT('',(2.249772170768,-6.828057715791,+    3.447722557505));+#1667 = CARTESIAN_POINT('',(-1.236030571613,-6.560480641736,+    3.447722557505));+#1668 = CARTESIAN_POINT('',(-3.76908378461,-4.818226231748,+    3.447722557505));+#1669 = CARTESIAN_POINT('',(-4.999999999998,-2.381651773527,+    3.447722557505));+#1670 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,3.447722557505));+#1671 = PCURVE('',#659,#1672);+#1672 = DEFINITIONAL_REPRESENTATION('',(#1673),#1677);+#1673 = LINE('',#1674,#1675);+#1674 = CARTESIAN_POINT('',(31.415926535898,0.));+#1675 = VECTOR('',#1676,1.);+#1676 = DIRECTION('',(0.,1.));+#1677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1678 = PCURVE('',#1679,#1684);+#1679 = CYLINDRICAL_SURFACE('',#1680,5.);+#1680 = AXIS2_PLACEMENT_3D('',#1681,#1682,#1683);+#1681 = CARTESIAN_POINT('',(0.,0.,3.4));+#1682 = DIRECTION('',(0.,0.,1.));+#1683 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1684 = DEFINITIONAL_REPRESENTATION('',(#1685),#1711);+#1685 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#1686,#1687,#1688,#1689,#1690,+    #1691,#1692,#1693,#1694,#1695,#1696,#1697,#1698,#1699,#1700,#1701,+    #1702,#1703,#1704,#1705,#1706,#1707,#1708,#1709,#1710),+  .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),+  (6.213111017846E-16,1.427996660723,2.855993321445,4.283989982168,+    5.711986642891,7.139983303613,8.567979964336,9.995976625058,+    11.423973285781,12.851969946504,14.279966607226,15.707963267949,+    17.135959928672,18.563956589394,19.991953250117,21.41994991084,+    22.847946571562,24.275943232285,25.703939893007,27.13193655373,+    28.559933214453,29.987929875175,31.415926535898),+  .QUASI_UNIFORM_KNOTS.);+#1686 = CARTESIAN_POINT('',(6.28318530718,4.7722557505E-02));+#1687 = CARTESIAN_POINT('',(6.189328461459,4.7722557505E-02));+#1688 = CARTESIAN_POINT('',(6.000569517416,4.7722557505E-02));+#1689 = CARTESIAN_POINT('',(5.715310708576,4.7722557505E-02));+#1690 = CARTESIAN_POINT('',(5.429076399901,4.7722557505E-02));+#1691 = CARTESIAN_POINT('',(5.142558136645,4.7722557505E-02));+#1692 = CARTESIAN_POINT('',(4.856167280849,4.7722557505E-02));+#1693 = CARTESIAN_POINT('',(4.570033461293,4.7722557505E-02));+#1694 = CARTESIAN_POINT('',(4.284140690769,4.7722557505E-02));+#1695 = CARTESIAN_POINT('',(3.99841915947,4.7722557505E-02));+#1696 = CARTESIAN_POINT('',(3.712790418604,4.7722557505E-02));+#1697 = CARTESIAN_POINT('',(3.427191456113,4.7722557505E-02));+#1698 = CARTESIAN_POINT('',(3.14159265359,4.7722557505E-02));+#1699 = CARTESIAN_POINT('',(2.855993851066,4.7722557505E-02));+#1700 = CARTESIAN_POINT('',(2.570394888575,4.7722557505E-02));+#1701 = CARTESIAN_POINT('',(2.28476614771,4.7722557505E-02));+#1702 = CARTESIAN_POINT('',(1.999044616411,4.7722557505E-02));+#1703 = CARTESIAN_POINT('',(1.713151845887,4.7722557505E-02));+#1704 = CARTESIAN_POINT('',(1.42701802633,4.7722557505E-02));+#1705 = CARTESIAN_POINT('',(1.140627170535,4.7722557505E-02));+#1706 = CARTESIAN_POINT('',(0.854108907278,4.7722557505E-02));+#1707 = CARTESIAN_POINT('',(0.567874598603,4.7722557505E-02));+#1708 = CARTESIAN_POINT('',(0.282615789764,4.7722557505E-02));+#1709 = CARTESIAN_POINT('',(9.385684572071E-02,4.7722557505E-02));+#1710 = CARTESIAN_POINT('',(0.,4.7722557505E-02));+#1711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1712 = ORIENTED_EDGE('',*,*,#1631,.F.);+#1713 = ORIENTED_EDGE('',*,*,#612,.F.);+#1714 = ADVANCED_FACE('',(#1715),#730,.F.);+#1715 = FACE_BOUND('',#1716,.F.);+#1716 = EDGE_LOOP('',(#1717,#1743,#1744,#1772,#1801,#1827,#1828,#1854,+    #1855,#1876,#1877,#1905,#1934,#1960,#1961,#1982));+#1717 = ORIENTED_EDGE('',*,*,#1718,.F.);+#1718 = EDGE_CURVE('',#1462,#1211,#1719,.T.);+#1719 = SURFACE_CURVE('',#1720,(#1725,#1736),.PCURVE_S1.);+#1720 = CIRCLE('',#1721,0.4);+#1721 = AXIS2_PLACEMENT_3D('',#1722,#1723,#1724);+#1722 = CARTESIAN_POINT('',(4.75,-4.75,0.15));+#1723 = DIRECTION('',(0.,0.,-1.));+#1724 = DIRECTION('',(1.224646799147E-16,1.,0.));+#1725 = PCURVE('',#730,#1726);+#1726 = DEFINITIONAL_REPRESENTATION('',(#1727),#1735);+#1727 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1728,#1729,#1730,#1731,+#1732,#1733,#1734),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1728 = CARTESIAN_POINT('',(-4.588919129901,4.35));+#1729 = CARTESIAN_POINT('',(-5.281739452929,4.35));+#1730 = CARTESIAN_POINT('',(-4.935329291415,4.95));+#1731 = CARTESIAN_POINT('',(-4.588919129901,5.55));+#1732 = CARTESIAN_POINT('',(-4.242508968387,4.95));+#1733 = CARTESIAN_POINT('',(-3.896098806873,4.35));+#1734 = CARTESIAN_POINT('',(-4.588919129901,4.35));+#1735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1736 = PCURVE('',#1228,#1737);+#1737 = DEFINITIONAL_REPRESENTATION('',(#1738),#1742);+#1738 = LINE('',#1739,#1740);+#1739 = CARTESIAN_POINT('',(7.853981633974,0.));+#1740 = VECTOR('',#1741,1.);+#1741 = DIRECTION('',(-1.,0.));+#1742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1743 = ORIENTED_EDGE('',*,*,#1461,.T.);+#1744 = ORIENTED_EDGE('',*,*,#1745,.F.);+#1745 = EDGE_CURVE('',#1746,#1464,#1748,.T.);+#1746 = VERTEX_POINT('',#1747);+#1747 = CARTESIAN_POINT('',(2.75,-0.45,0.15));+#1748 = SURFACE_CURVE('',#1749,(#1753,#1760),.PCURVE_S1.);+#1749 = LINE('',#1750,#1751);+#1750 = CARTESIAN_POINT('',(2.75,-0.45,0.15));+#1751 = VECTOR('',#1752,1.);+#1752 = DIRECTION('',(1.,-2.449293598295E-16,0.));+#1753 = PCURVE('',#730,#1754);+#1754 = DEFINITIONAL_REPRESENTATION('',(#1755),#1759);+#1755 = LINE('',#1756,#1757);+#1756 = CARTESIAN_POINT('',(-2.588919129901,0.45));+#1757 = VECTOR('',#1758,1.);+#1758 = DIRECTION('',(-1.,1.224646799148E-16));+#1759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1760 = PCURVE('',#1761,#1766);+#1761 = PLANE('',#1762);+#1762 = AXIS2_PLACEMENT_3D('',#1763,#1764,#1765);+#1763 = CARTESIAN_POINT('',(2.75,-0.45,0.));+#1764 = DIRECTION('',(2.449293598295E-16,1.,0.));+#1765 = DIRECTION('',(1.,-2.449293598295E-16,0.));+#1766 = DEFINITIONAL_REPRESENTATION('',(#1767),#1771);+#1767 = LINE('',#1768,#1769);+#1768 = CARTESIAN_POINT('',(0.,-0.15));+#1769 = VECTOR('',#1770,1.);+#1770 = DIRECTION('',(1.,0.));+#1771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1772 = ORIENTED_EDGE('',*,*,#1773,.F.);+#1773 = EDGE_CURVE('',#1774,#1746,#1776,.T.);+#1774 = VERTEX_POINT('',#1775);+#1775 = CARTESIAN_POINT('',(2.75,0.45,0.15));+#1776 = SURFACE_CURVE('',#1777,(#1782,#1789),.PCURVE_S1.);+#1777 = CIRCLE('',#1778,0.45);+#1778 = AXIS2_PLACEMENT_3D('',#1779,#1780,#1781);+#1779 = CARTESIAN_POINT('',(2.75,-6.73555739531E-16,0.15));+#1780 = DIRECTION('',(0.,-0.,1.));+#1781 = DIRECTION('',(2.449293598295E-16,1.,0.));+#1782 = PCURVE('',#730,#1783);+#1783 = DEFINITIONAL_REPRESENTATION('',(#1784),#1788);+#1784 = CIRCLE('',#1785,0.45);+#1785 = AXIS2_PLACEMENT_2D('',#1786,#1787);+#1786 = CARTESIAN_POINT('',(-2.588919129901,3.367778697656E-16));+#1787 = DIRECTION('',(-1.224646799148E-16,-1.));+#1788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1789 = PCURVE('',#1790,#1795);+#1790 = CYLINDRICAL_SURFACE('',#1791,0.45);+#1791 = AXIS2_PLACEMENT_3D('',#1792,#1793,#1794);+#1792 = CARTESIAN_POINT('',(2.75,-6.73555739531E-16,0.));+#1793 = DIRECTION('',(0.,0.,-1.));+#1794 = DIRECTION('',(2.449293598295E-16,1.,0.));+#1795 = DEFINITIONAL_REPRESENTATION('',(#1796),#1800);+#1796 = LINE('',#1797,#1798);+#1797 = CARTESIAN_POINT('',(6.28318530718,-0.15));+#1798 = VECTOR('',#1799,1.);+#1799 = DIRECTION('',(-1.,0.));+#1800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1801 = ORIENTED_EDGE('',*,*,#1802,.F.);+#1802 = EDGE_CURVE('',#1580,#1774,#1803,.T.);+#1803 = SURFACE_CURVE('',#1804,(#1808,#1815),.PCURVE_S1.);+#1804 = LINE('',#1805,#1806);+#1805 = CARTESIAN_POINT('',(6.,0.45,0.15));+#1806 = VECTOR('',#1807,1.);+#1807 = DIRECTION('',(-1.,2.449293598295E-16,0.));+#1808 = PCURVE('',#730,#1809);+#1809 = DEFINITIONAL_REPRESENTATION('',(#1810),#1814);+#1810 = LINE('',#1811,#1812);+#1811 = CARTESIAN_POINT('',(-5.838919129901,-0.45));+#1812 = VECTOR('',#1813,1.);+#1813 = DIRECTION('',(1.,-1.224646799148E-16));+#1814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1815 = PCURVE('',#1816,#1821);+#1816 = PLANE('',#1817);+#1817 = AXIS2_PLACEMENT_3D('',#1818,#1819,#1820);+#1818 = CARTESIAN_POINT('',(6.,0.45,0.));+#1819 = DIRECTION('',(-2.449293598295E-16,-1.,0.));+#1820 = DIRECTION('',(-1.,2.449293598295E-16,0.));+#1821 = DEFINITIONAL_REPRESENTATION('',(#1822),#1826);+#1822 = LINE('',#1823,#1824);+#1823 = CARTESIAN_POINT('',(0.,-0.15));+#1824 = VECTOR('',#1825,1.);+#1825 = DIRECTION('',(1.,0.));+#1826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1827 = ORIENTED_EDGE('',*,*,#1579,.T.);+#1828 = ORIENTED_EDGE('',*,*,#1829,.F.);+#1829 = EDGE_CURVE('',#1060,#1557,#1830,.T.);+#1830 = SURFACE_CURVE('',#1831,(#1836,#1847),.PCURVE_S1.);+#1831 = CIRCLE('',#1832,0.4);+#1832 = AXIS2_PLACEMENT_3D('',#1833,#1834,#1835);+#1833 = CARTESIAN_POINT('',(4.75,4.75,0.15));+#1834 = DIRECTION('',(0.,0.,-1.));+#1835 = DIRECTION('',(1.224646799147E-16,1.,0.));+#1836 = PCURVE('',#730,#1837);+#1837 = DEFINITIONAL_REPRESENTATION('',(#1838),#1846);+#1838 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1839,#1840,#1841,#1842,+#1843,#1844,#1845),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#1839 = CARTESIAN_POINT('',(-4.588919129901,-5.15));+#1840 = CARTESIAN_POINT('',(-5.281739452929,-5.15));+#1841 = CARTESIAN_POINT('',(-4.935329291415,-4.55));+#1842 = CARTESIAN_POINT('',(-4.588919129901,-3.95));+#1843 = CARTESIAN_POINT('',(-4.242508968387,-4.55));+#1844 = CARTESIAN_POINT('',(-3.896098806873,-5.15));+#1845 = CARTESIAN_POINT('',(-4.588919129901,-5.15));+#1846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1847 = PCURVE('',#1100,#1848);+#1848 = DEFINITIONAL_REPRESENTATION('',(#1849),#1853);+#1849 = LINE('',#1850,#1851);+#1850 = CARTESIAN_POINT('',(6.28318530718,0.));+#1851 = VECTOR('',#1852,1.);+#1852 = DIRECTION('',(-1.,0.));+#1853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1854 = ORIENTED_EDGE('',*,*,#1059,.T.);+#1855 = ORIENTED_EDGE('',*,*,#1856,.T.);+#1856 = EDGE_CURVE('',#1062,#713,#1857,.T.);+#1857 = SURFACE_CURVE('',#1858,(#1862,#1869),.PCURVE_S1.);+#1858 = LINE('',#1859,#1860);+#1859 = CARTESIAN_POINT('',(-4.15,5.15,0.15));+#1860 = VECTOR('',#1861,1.);+#1861 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1862 = PCURVE('',#730,#1863);+#1863 = DEFINITIONAL_REPRESENTATION('',(#1864),#1868);+#1864 = LINE('',#1865,#1866);+#1865 = CARTESIAN_POINT('',(4.311080870099,-5.15));+#1866 = VECTOR('',#1867,1.);+#1867 = DIRECTION('',(0.707106781187,0.707106781187));+#1868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1869 = PCURVE('',#758,#1870);+#1870 = DEFINITIONAL_REPRESENTATION('',(#1871),#1875);+#1871 = LINE('',#1872,#1873);+#1872 = CARTESIAN_POINT('',(0.,0.));+#1873 = VECTOR('',#1874,1.);+#1874 = DIRECTION('',(1.,0.));+#1875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1876 = ORIENTED_EDGE('',*,*,#712,.T.);+#1877 = ORIENTED_EDGE('',*,*,#1878,.F.);+#1878 = EDGE_CURVE('',#1879,#715,#1881,.T.);+#1879 = VERTEX_POINT('',#1880);+#1880 = CARTESIAN_POINT('',(-2.75,0.45,0.15));+#1881 = SURFACE_CURVE('',#1882,(#1886,#1893),.PCURVE_S1.);+#1882 = LINE('',#1883,#1884);+#1883 = CARTESIAN_POINT('',(-2.75,0.45,0.15));+#1884 = VECTOR('',#1885,1.);+#1885 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1886 = PCURVE('',#730,#1887);+#1887 = DEFINITIONAL_REPRESENTATION('',(#1888),#1892);+#1888 = LINE('',#1889,#1890);+#1889 = CARTESIAN_POINT('',(2.911080870099,-0.45));+#1890 = VECTOR('',#1891,1.);+#1891 = DIRECTION('',(1.,0.));+#1892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1893 = PCURVE('',#1894,#1899);+#1894 = PLANE('',#1895);+#1895 = AXIS2_PLACEMENT_3D('',#1896,#1897,#1898);+#1896 = CARTESIAN_POINT('',(-2.75,0.45,0.));+#1897 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#1898 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1899 = DEFINITIONAL_REPRESENTATION('',(#1900),#1904);+#1900 = LINE('',#1901,#1902);+#1901 = CARTESIAN_POINT('',(0.,-0.15));+#1902 = VECTOR('',#1903,1.);+#1903 = DIRECTION('',(1.,0.));+#1904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1905 = ORIENTED_EDGE('',*,*,#1906,.F.);+#1906 = EDGE_CURVE('',#1907,#1879,#1909,.T.);+#1907 = VERTEX_POINT('',#1908);+#1908 = CARTESIAN_POINT('',(-2.75,-0.45,0.15));+#1909 = SURFACE_CURVE('',#1910,(#1915,#1922),.PCURVE_S1.);+#1910 = CIRCLE('',#1911,0.45);+#1911 = AXIS2_PLACEMENT_3D('',#1912,#1913,#1914);+#1912 = CARTESIAN_POINT('',(-2.75,3.367778697655E-16,0.15));+#1913 = DIRECTION('',(0.,0.,1.));+#1914 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#1915 = PCURVE('',#730,#1916);+#1916 = DEFINITIONAL_REPRESENTATION('',(#1917),#1921);+#1917 = CIRCLE('',#1918,0.45);+#1918 = AXIS2_PLACEMENT_2D('',#1919,#1920);+#1919 = CARTESIAN_POINT('',(2.911080870099,-2.958228394579E-29));+#1920 = DIRECTION('',(0.,1.));+#1921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1922 = PCURVE('',#1923,#1928);+#1923 = CYLINDRICAL_SURFACE('',#1924,0.45);+#1924 = AXIS2_PLACEMENT_3D('',#1925,#1926,#1927);+#1925 = CARTESIAN_POINT('',(-2.75,3.367778697655E-16,0.));+#1926 = DIRECTION('',(0.,-0.,-1.));+#1927 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#1928 = DEFINITIONAL_REPRESENTATION('',(#1929),#1933);+#1929 = LINE('',#1930,#1931);+#1930 = CARTESIAN_POINT('',(6.28318530718,-0.15));+#1931 = VECTOR('',#1932,1.);+#1932 = DIRECTION('',(-1.,0.));+#1933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1934 = ORIENTED_EDGE('',*,*,#1935,.F.);+#1935 = EDGE_CURVE('',#900,#1907,#1936,.T.);+#1936 = SURFACE_CURVE('',#1937,(#1941,#1948),.PCURVE_S1.);+#1937 = LINE('',#1938,#1939);+#1938 = CARTESIAN_POINT('',(-6.,-0.45,0.15));+#1939 = VECTOR('',#1940,1.);+#1940 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#1941 = PCURVE('',#730,#1942);+#1942 = DEFINITIONAL_REPRESENTATION('',(#1943),#1947);+#1943 = LINE('',#1944,#1945);+#1944 = CARTESIAN_POINT('',(6.161080870099,0.45));+#1945 = VECTOR('',#1946,1.);+#1946 = DIRECTION('',(-1.,0.));+#1947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1948 = PCURVE('',#1949,#1954);+#1949 = PLANE('',#1950);+#1950 = AXIS2_PLACEMENT_3D('',#1951,#1952,#1953);+#1951 = CARTESIAN_POINT('',(-6.,-0.45,0.));+#1952 = DIRECTION('',(1.224646799147E-16,1.,0.));+#1953 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#1954 = DEFINITIONAL_REPRESENTATION('',(#1955),#1959);+#1955 = LINE('',#1956,#1957);+#1956 = CARTESIAN_POINT('',(0.,-0.15));+#1957 = VECTOR('',#1958,1.);+#1958 = DIRECTION('',(1.,0.));+#1959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1960 = ORIENTED_EDGE('',*,*,#899,.T.);+#1961 = ORIENTED_EDGE('',*,*,#1962,.T.);+#1962 = EDGE_CURVE('',#872,#1241,#1963,.T.);+#1963 = SURFACE_CURVE('',#1964,(#1968,#1975),.PCURVE_S1.);+#1964 = LINE('',#1965,#1966);+#1965 = CARTESIAN_POINT('',(-5.15,-4.15,0.15));+#1966 = VECTOR('',#1967,1.);+#1967 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1968 = PCURVE('',#730,#1969);+#1969 = DEFINITIONAL_REPRESENTATION('',(#1970),#1974);+#1970 = LINE('',#1971,#1972);+#1971 = CARTESIAN_POINT('',(5.311080870099,4.15));+#1972 = VECTOR('',#1973,1.);+#1973 = DIRECTION('',(-0.707106781187,0.707106781187));+#1974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1975 = PCURVE('',#887,#1976);+#1976 = DEFINITIONAL_REPRESENTATION('',(#1977),#1981);+#1977 = LINE('',#1978,#1979);+#1978 = CARTESIAN_POINT('',(0.,0.));+#1979 = VECTOR('',#1980,1.);+#1980 = DIRECTION('',(1.,0.));+#1981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#1982 = ORIENTED_EDGE('',*,*,#1240,.T.);+#1983 = ADVANCED_FACE('',(#1984),#758,.F.);+#1984 = FACE_BOUND('',#1985,.F.);+#1985 = EDGE_LOOP('',(#1986,#1987,#1988,#2009));+#1986 = ORIENTED_EDGE('',*,*,#1856,.F.);+#1987 = ORIENTED_EDGE('',*,*,#1186,.T.);+#1988 = ORIENTED_EDGE('',*,*,#1989,.T.);+#1989 = EDGE_CURVE('',#1164,#743,#1990,.T.);+#1990 = SURFACE_CURVE('',#1991,(#1995,#2002),.PCURVE_S1.);+#1991 = LINE('',#1992,#1993);+#1992 = CARTESIAN_POINT('',(-3.1125,6.1875,0.85));+#1993 = VECTOR('',#1994,1.);+#1994 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1995 = PCURVE('',#758,#1996);+#1996 = DEFINITIONAL_REPRESENTATION('',(#1997),#2001);+#1997 = LINE('',#1998,#1999);+#1998 = CARTESIAN_POINT('',(-1.467246570962,-0.7));+#1999 = VECTOR('',#2000,1.);+#2000 = DIRECTION('',(1.,0.));+#2001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2002 = PCURVE('',#786,#2003);+#2003 = DEFINITIONAL_REPRESENTATION('',(#2004),#2008);+#2004 = LINE('',#2005,#2006);+#2005 = CARTESIAN_POINT('',(3.1125,-1.0375));+#2006 = VECTOR('',#2007,1.);+#2007 = DIRECTION('',(0.707106781187,0.707106781187));+#2008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2009 = ORIENTED_EDGE('',*,*,#742,.F.);+#2010 = ADVANCED_FACE('',(#2011),#936,.T.);+#2011 = FACE_BOUND('',#2012,.T.);+#2012 = EDGE_LOOP('',(#2013,#2036,#2064,#2085));+#2013 = ORIENTED_EDGE('',*,*,#2014,.T.);+#2014 = EDGE_CURVE('',#715,#2015,#2017,.T.);+#2015 = VERTEX_POINT('',#2016);+#2016 = CARTESIAN_POINT('',(-6.,0.45,0.15));+#2017 = SURFACE_CURVE('',#2018,(#2022,#2029),.PCURVE_S1.);+#2018 = LINE('',#2019,#2020);+#2019 = CARTESIAN_POINT('',(-2.75,0.45,0.15));+#2020 = VECTOR('',#2021,1.);+#2021 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2022 = PCURVE('',#936,#2023);+#2023 = DEFINITIONAL_REPRESENTATION('',(#2024),#2028);+#2024 = LINE('',#2025,#2026);+#2025 = CARTESIAN_POINT('',(-1.501343967025,-0.45));+#2026 = VECTOR('',#2027,1.);+#2027 = DIRECTION('',(1.,0.));+#2028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2029 = PCURVE('',#1894,#2030);+#2030 = DEFINITIONAL_REPRESENTATION('',(#2031),#2035);+#2031 = LINE('',#2032,#2033);+#2032 = CARTESIAN_POINT('',(0.,-0.15));+#2033 = VECTOR('',#2034,1.);+#2034 = DIRECTION('',(1.,0.));+#2035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2036 = ORIENTED_EDGE('',*,*,#2037,.T.);+#2037 = EDGE_CURVE('',#2015,#2038,#2040,.T.);+#2038 = VERTEX_POINT('',#2039);+#2039 = CARTESIAN_POINT('',(-6.,-0.45,0.15));+#2040 = SURFACE_CURVE('',#2041,(#2045,#2052),.PCURVE_S1.);+#2041 = LINE('',#2042,#2043);+#2042 = CARTESIAN_POINT('',(-6.,0.45,0.15));+#2043 = VECTOR('',#2044,1.);+#2044 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#2045 = PCURVE('',#936,#2046);+#2046 = DEFINITIONAL_REPRESENTATION('',(#2047),#2051);+#2047 = LINE('',#2048,#2049);+#2048 = CARTESIAN_POINT('',(1.748656032975,-0.45));+#2049 = VECTOR('',#2050,1.);+#2050 = DIRECTION('',(0.,1.));+#2051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2052 = PCURVE('',#2053,#2058);+#2053 = PLANE('',#2054);+#2054 = AXIS2_PLACEMENT_3D('',#2055,#2056,#2057);+#2055 = CARTESIAN_POINT('',(-6.,0.45,0.));+#2056 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#2057 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#2058 = DEFINITIONAL_REPRESENTATION('',(#2059),#2063);+#2059 = LINE('',#2060,#2061);+#2060 = CARTESIAN_POINT('',(0.,-0.15));+#2061 = VECTOR('',#2062,1.);+#2062 = DIRECTION('',(1.,0.));+#2063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2064 = ORIENTED_EDGE('',*,*,#2065,.T.);+#2065 = EDGE_CURVE('',#2038,#900,#2066,.T.);+#2066 = SURFACE_CURVE('',#2067,(#2071,#2078),.PCURVE_S1.);+#2067 = LINE('',#2068,#2069);+#2068 = CARTESIAN_POINT('',(-6.,-0.45,0.15));+#2069 = VECTOR('',#2070,1.);+#2070 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#2071 = PCURVE('',#936,#2072);+#2072 = DEFINITIONAL_REPRESENTATION('',(#2073),#2077);+#2073 = LINE('',#2074,#2075);+#2074 = CARTESIAN_POINT('',(1.748656032975,0.45));+#2075 = VECTOR('',#2076,1.);+#2076 = DIRECTION('',(-1.,0.));+#2077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2078 = PCURVE('',#1949,#2079);+#2079 = DEFINITIONAL_REPRESENTATION('',(#2080),#2084);+#2080 = LINE('',#2081,#2082);+#2081 = CARTESIAN_POINT('',(0.,-0.15));+#2082 = VECTOR('',#2083,1.);+#2083 = DIRECTION('',(1.,0.));+#2084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2085 = ORIENTED_EDGE('',*,*,#922,.F.);+#2086 = ADVANCED_FACE('',(#2087),#786,.T.);+#2087 = FACE_BOUND('',#2088,.T.);+#2088 = EDGE_LOOP('',(#2089,#2090,#2091,#2092));+#2089 = ORIENTED_EDGE('',*,*,#976,.T.);+#2090 = ORIENTED_EDGE('',*,*,#1163,.T.);+#2091 = ORIENTED_EDGE('',*,*,#1989,.T.);+#2092 = ORIENTED_EDGE('',*,*,#770,.T.);+#2093 = ADVANCED_FACE('',(#2094),#887,.F.);+#2094 = FACE_BOUND('',#2095,.F.);+#2095 = EDGE_LOOP('',(#2096,#2097,#2098,#2119));+#2096 = ORIENTED_EDGE('',*,*,#1962,.F.);+#2097 = ORIENTED_EDGE('',*,*,#871,.T.);+#2098 = ORIENTED_EDGE('',*,*,#2099,.T.);+#2099 = EDGE_CURVE('',#844,#1264,#2100,.T.);+#2100 = SURFACE_CURVE('',#2101,(#2105,#2112),.PCURVE_S1.);+#2101 = LINE('',#2102,#2103);+#2102 = CARTESIAN_POINT('',(-6.1875,-3.1125,0.85));+#2103 = VECTOR('',#2104,1.);+#2104 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#2105 = PCURVE('',#887,#2106);+#2106 = DEFINITIONAL_REPRESENTATION('',(#2107),#2111);+#2107 = LINE('',#2108,#2109);+#2108 = CARTESIAN_POINT('',(-1.467246570962,-0.7));+#2109 = VECTOR('',#2110,1.);+#2110 = DIRECTION('',(1.,0.));+#2111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2112 = PCURVE('',#859,#2113);+#2113 = DEFINITIONAL_REPRESENTATION('',(#2114),#2118);+#2114 = LINE('',#2115,#2116);+#2115 = CARTESIAN_POINT('',(6.1875,8.2625));+#2116 = VECTOR('',#2117,1.);+#2117 = DIRECTION('',(-0.707106781187,0.707106781187));+#2118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2119 = ORIENTED_EDGE('',*,*,#1263,.F.);+#2120 = ADVANCED_FACE('',(#2121),#859,.T.);+#2121 = FACE_BOUND('',#2122,.T.);+#2122 = EDGE_LOOP('',(#2123,#2124,#2125,#2126));+#2123 = ORIENTED_EDGE('',*,*,#1286,.F.);+#2124 = ORIENTED_EDGE('',*,*,#1028,.T.);+#2125 = ORIENTED_EDGE('',*,*,#843,.T.);+#2126 = ORIENTED_EDGE('',*,*,#2099,.T.);+#2127 = ADVANCED_FACE('',(#2128),#1128,.T.);+#2128 = FACE_BOUND('',#2129,.T.);+#2129 = EDGE_LOOP('',(#2130,#2131,#2132,#2158));+#2130 = ORIENTED_EDGE('',*,*,#1361,.F.);+#2131 = ORIENTED_EDGE('',*,*,#1533,.T.);+#2132 = ORIENTED_EDGE('',*,*,#2133,.F.);+#2133 = EDGE_CURVE('',#1085,#1534,#2134,.T.);+#2134 = SURFACE_CURVE('',#2135,(#2140,#2151),.PCURVE_S1.);+#2135 = CIRCLE('',#2136,0.4);+#2136 = AXIS2_PLACEMENT_3D('',#2137,#2138,#2139);+#2137 = CARTESIAN_POINT('',(4.75,4.75,1.15));+#2138 = DIRECTION('',(0.,0.,-1.));+#2139 = DIRECTION('',(1.224646799147E-16,1.,0.));+#2140 = PCURVE('',#1128,#2141);+#2141 = DEFINITIONAL_REPRESENTATION('',(#2142),#2150);+#2142 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2143,#2144,#2145,#2146,+#2147,#2148,#2149),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2143 = CARTESIAN_POINT('',(-4.588919129901,-5.15));+#2144 = CARTESIAN_POINT('',(-5.281739452929,-5.15));+#2145 = CARTESIAN_POINT('',(-4.935329291415,-4.55));+#2146 = CARTESIAN_POINT('',(-4.588919129901,-3.95));+#2147 = CARTESIAN_POINT('',(-4.242508968387,-4.55));+#2148 = CARTESIAN_POINT('',(-3.896098806873,-5.15));+#2149 = CARTESIAN_POINT('',(-4.588919129901,-5.15));+#2150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2151 = PCURVE('',#1100,#2152);+#2152 = DEFINITIONAL_REPRESENTATION('',(#2153),#2157);+#2153 = LINE('',#2154,#2155);+#2154 = CARTESIAN_POINT('',(6.28318530718,1.));+#2155 = VECTOR('',#2156,1.);+#2156 = DIRECTION('',(-1.,0.));+#2157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2158 = ORIENTED_EDGE('',*,*,#1112,.T.);+#2159 = ADVANCED_FACE('',(#2160),#1100,.T.);+#2160 = FACE_BOUND('',#2161,.T.);+#2161 = EDGE_LOOP('',(#2162,#2163,#2164,#2165));+#2162 = ORIENTED_EDGE('',*,*,#1084,.T.);+#2163 = ORIENTED_EDGE('',*,*,#2133,.T.);+#2164 = ORIENTED_EDGE('',*,*,#1556,.F.);+#2165 = ORIENTED_EDGE('',*,*,#1829,.F.);+#2166 = ADVANCED_FACE('',(#2167),#1228,.T.);+#2167 = FACE_BOUND('',#2168,.T.);+#2168 = EDGE_LOOP('',(#2169,#2170,#2196,#2197));+#2169 = ORIENTED_EDGE('',*,*,#1486,.T.);+#2170 = ORIENTED_EDGE('',*,*,#2171,.T.);+#2171 = EDGE_CURVE('',#1487,#1213,#2172,.T.);+#2172 = SURFACE_CURVE('',#2173,(#2178,#2185),.PCURVE_S1.);+#2173 = CIRCLE('',#2174,0.4);+#2174 = AXIS2_PLACEMENT_3D('',#2175,#2176,#2177);+#2175 = CARTESIAN_POINT('',(4.75,-4.75,1.15));+#2176 = DIRECTION('',(0.,0.,-1.));+#2177 = DIRECTION('',(1.224646799147E-16,1.,0.));+#2178 = PCURVE('',#1228,#2179);+#2179 = DEFINITIONAL_REPRESENTATION('',(#2180),#2184);+#2180 = LINE('',#2181,#2182);+#2181 = CARTESIAN_POINT('',(7.853981633974,1.));+#2182 = VECTOR('',#2183,1.);+#2183 = DIRECTION('',(-1.,0.));+#2184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2185 = PCURVE('',#1346,#2186);+#2186 = DEFINITIONAL_REPRESENTATION('',(#2187),#2195);+#2187 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2188,#2189,#2190,#2191,+#2192,#2193,#2194),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2188 = CARTESIAN_POINT('',(-4.588919129901,4.35));+#2189 = CARTESIAN_POINT('',(-5.281739452929,4.35));+#2190 = CARTESIAN_POINT('',(-4.935329291415,4.95));+#2191 = CARTESIAN_POINT('',(-4.588919129901,5.55));+#2192 = CARTESIAN_POINT('',(-4.242508968387,4.95));+#2193 = CARTESIAN_POINT('',(-3.896098806873,4.35));+#2194 = CARTESIAN_POINT('',(-4.588919129901,4.35));+#2195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2196 = ORIENTED_EDGE('',*,*,#1210,.F.);+#2197 = ORIENTED_EDGE('',*,*,#1718,.F.);+#2198 = ADVANCED_FACE('',(#2199),#1346,.T.);+#2199 = FACE_BOUND('',#2200,.T.);+#2200 = EDGE_LOOP('',(#2201,#2202,#2203,#2204));+#2201 = ORIENTED_EDGE('',*,*,#2171,.F.);+#2202 = ORIENTED_EDGE('',*,*,#1509,.T.);+#2203 = ORIENTED_EDGE('',*,*,#1434,.F.);+#2204 = ORIENTED_EDGE('',*,*,#1332,.T.);+#2205 = ADVANCED_FACE('',(#2206),#1616,.T.);+#2206 = FACE_BOUND('',#2207,.T.);+#2207 = EDGE_LOOP('',(#2208,#2231,#2259,#2280));+#2208 = ORIENTED_EDGE('',*,*,#2209,.T.);+#2209 = EDGE_CURVE('',#1464,#2210,#2212,.T.);+#2210 = VERTEX_POINT('',#2211);+#2211 = CARTESIAN_POINT('',(6.,-0.45,0.15));+#2212 = SURFACE_CURVE('',#2213,(#2217,#2224),.PCURVE_S1.);+#2213 = LINE('',#2214,#2215);+#2214 = CARTESIAN_POINT('',(2.75,-0.45,0.15));+#2215 = VECTOR('',#2216,1.);+#2216 = DIRECTION('',(1.,-2.449293598295E-16,0.));+#2217 = PCURVE('',#1616,#2218);+#2218 = DEFINITIONAL_REPRESENTATION('',(#2219),#2223);+#2219 = LINE('',#2220,#2221);+#2220 = CARTESIAN_POINT('',(-1.501343967025,-0.45));+#2221 = VECTOR('',#2222,1.);+#2222 = DIRECTION('',(1.,0.));+#2223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2224 = PCURVE('',#1761,#2225);+#2225 = DEFINITIONAL_REPRESENTATION('',(#2226),#2230);+#2226 = LINE('',#2227,#2228);+#2227 = CARTESIAN_POINT('',(0.,-0.15));+#2228 = VECTOR('',#2229,1.);+#2229 = DIRECTION('',(1.,0.));+#2230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2231 = ORIENTED_EDGE('',*,*,#2232,.T.);+#2232 = EDGE_CURVE('',#2210,#2233,#2235,.T.);+#2233 = VERTEX_POINT('',#2234);+#2234 = CARTESIAN_POINT('',(6.,0.45,0.15));+#2235 = SURFACE_CURVE('',#2236,(#2240,#2247),.PCURVE_S1.);+#2236 = LINE('',#2237,#2238);+#2237 = CARTESIAN_POINT('',(6.,-0.45,0.15));+#2238 = VECTOR('',#2239,1.);+#2239 = DIRECTION('',(2.449293598295E-16,1.,0.));+#2240 = PCURVE('',#1616,#2241);+#2241 = DEFINITIONAL_REPRESENTATION('',(#2242),#2246);+#2242 = LINE('',#2243,#2244);+#2243 = CARTESIAN_POINT('',(1.748656032975,-0.45));+#2244 = VECTOR('',#2245,1.);+#2245 = DIRECTION('',(0.,1.));+#2246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2247 = PCURVE('',#2248,#2253);+#2248 = PLANE('',#2249);+#2249 = AXIS2_PLACEMENT_3D('',#2250,#2251,#2252);+#2250 = CARTESIAN_POINT('',(6.,-0.45,0.));+#2251 = DIRECTION('',(-1.,2.449293598295E-16,0.));+#2252 = DIRECTION('',(2.449293598295E-16,1.,0.));+#2253 = DEFINITIONAL_REPRESENTATION('',(#2254),#2258);+#2254 = LINE('',#2255,#2256);+#2255 = CARTESIAN_POINT('',(0.,-0.15));+#2256 = VECTOR('',#2257,1.);+#2257 = DIRECTION('',(1.,0.));+#2258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2259 = ORIENTED_EDGE('',*,*,#2260,.T.);+#2260 = EDGE_CURVE('',#2233,#1580,#2261,.T.);+#2261 = SURFACE_CURVE('',#2262,(#2266,#2273),.PCURVE_S1.);+#2262 = LINE('',#2263,#2264);+#2263 = CARTESIAN_POINT('',(6.,0.45,0.15));+#2264 = VECTOR('',#2265,1.);+#2265 = DIRECTION('',(-1.,2.449293598295E-16,0.));+#2266 = PCURVE('',#1616,#2267);+#2267 = DEFINITIONAL_REPRESENTATION('',(#2268),#2272);+#2268 = LINE('',#2269,#2270);+#2269 = CARTESIAN_POINT('',(1.748656032975,0.45));+#2270 = VECTOR('',#2271,1.);+#2271 = DIRECTION('',(-1.,0.));+#2272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2273 = PCURVE('',#1816,#2274);+#2274 = DEFINITIONAL_REPRESENTATION('',(#2275),#2279);+#2275 = LINE('',#2276,#2277);+#2276 = CARTESIAN_POINT('',(0.,-0.15));+#2277 = VECTOR('',#2278,1.);+#2278 = DIRECTION('',(1.,0.));+#2279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2280 = ORIENTED_EDGE('',*,*,#1602,.F.);+#2281 = ADVANCED_FACE('',(#2282),#1679,.T.);+#2282 = FACE_BOUND('',#2283,.T.);+#2283 = EDGE_LOOP('',(#2284,#2285,#2308,#2337,#2366,#2390,#2417));+#2284 = ORIENTED_EDGE('',*,*,#1654,.F.);+#2285 = ORIENTED_EDGE('',*,*,#2286,.T.);+#2286 = EDGE_CURVE('',#1632,#2287,#2289,.T.);+#2287 = VERTEX_POINT('',#2288);+#2288 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,9.833333333333));+#2289 = SEAM_CURVE('',#2290,(#2294,#2301),.PCURVE_S1.);+#2290 = LINE('',#2291,#2292);+#2291 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,3.4));+#2292 = VECTOR('',#2293,1.);+#2293 = DIRECTION('',(0.,0.,1.));+#2294 = PCURVE('',#1679,#2295);+#2295 = DEFINITIONAL_REPRESENTATION('',(#2296),#2300);+#2296 = LINE('',#2297,#2298);+#2297 = CARTESIAN_POINT('',(6.28318530718,0.));+#2298 = VECTOR('',#2299,1.);+#2299 = DIRECTION('',(0.,1.));+#2300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2301 = PCURVE('',#1679,#2302);+#2302 = DEFINITIONAL_REPRESENTATION('',(#2303),#2307);+#2303 = LINE('',#2304,#2305);+#2304 = CARTESIAN_POINT('',(0.,0.));+#2305 = VECTOR('',#2306,1.);+#2306 = DIRECTION('',(0.,1.));+#2307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2308 = ORIENTED_EDGE('',*,*,#2309,.T.);+#2309 = EDGE_CURVE('',#2287,#2310,#2312,.T.);+#2310 = VERTEX_POINT('',#2311);+#2311 = CARTESIAN_POINT('',(1.5,4.769696007085,9.833333333333));+#2312 = SURFACE_CURVE('',#2313,(#2318,#2325),.PCURVE_S1.);+#2313 = CIRCLE('',#2314,5.);+#2314 = AXIS2_PLACEMENT_3D('',#2315,#2316,#2317);+#2315 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#2316 = DIRECTION('',(0.,0.,-1.));+#2317 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2318 = PCURVE('',#1679,#2319);+#2319 = DEFINITIONAL_REPRESENTATION('',(#2320),#2324);+#2320 = LINE('',#2321,#2322);+#2321 = CARTESIAN_POINT('',(6.28318530718,6.433333333333));+#2322 = VECTOR('',#2323,1.);+#2323 = DIRECTION('',(-1.,0.));+#2324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2325 = PCURVE('',#2326,#2331);+#2326 = TOROIDAL_SURFACE('',#2327,4.333333333333,0.666666666667);+#2327 = AXIS2_PLACEMENT_3D('',#2328,#2329,#2330);+#2328 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#2329 = DIRECTION('',(0.,0.,1.));+#2330 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2331 = DEFINITIONAL_REPRESENTATION('',(#2332),#2336);+#2332 = LINE('',#2333,#2334);+#2333 = CARTESIAN_POINT('',(6.28318530718,0.));+#2334 = VECTOR('',#2335,1.);+#2335 = DIRECTION('',(-1.,0.));+#2336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2337 = ORIENTED_EDGE('',*,*,#2338,.T.);+#2338 = EDGE_CURVE('',#2310,#2339,#2341,.T.);+#2339 = VERTEX_POINT('',#2340);+#2340 = CARTESIAN_POINT('',(5.,2.136328954389E-15,9.833333333333));+#2341 = SURFACE_CURVE('',#2342,(#2347,#2354),.PCURVE_S1.);+#2342 = CIRCLE('',#2343,5.);+#2343 = AXIS2_PLACEMENT_3D('',#2344,#2345,#2346);+#2344 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#2345 = DIRECTION('',(0.,0.,-1.));+#2346 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2347 = PCURVE('',#1679,#2348);+#2348 = DEFINITIONAL_REPRESENTATION('',(#2349),#2353);+#2349 = LINE('',#2350,#2351);+#2350 = CARTESIAN_POINT('',(6.28318530718,6.433333333333));+#2351 = VECTOR('',#2352,1.);+#2352 = DIRECTION('',(-1.,0.));+#2353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2354 = PCURVE('',#2355,#2360);+#2355 = TOROIDAL_SURFACE('',#2356,4.333333333333,0.666666666667);+#2356 = AXIS2_PLACEMENT_3D('',#2357,#2358,#2359);+#2357 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#2358 = DIRECTION('',(0.,0.,1.));+#2359 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2360 = DEFINITIONAL_REPRESENTATION('',(#2361),#2365);+#2361 = LINE('',#2362,#2363);+#2362 = CARTESIAN_POINT('',(6.28318530718,0.));+#2363 = VECTOR('',#2364,1.);+#2364 = DIRECTION('',(-1.,0.));+#2365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2366 = ORIENTED_EDGE('',*,*,#2367,.T.);+#2367 = EDGE_CURVE('',#2339,#2368,#2370,.T.);+#2368 = VERTEX_POINT('',#2369);+#2369 = CARTESIAN_POINT('',(1.5,-4.769696007085,9.833333333333));+#2370 = SURFACE_CURVE('',#2371,(#2376,#2383),.PCURVE_S1.);+#2371 = CIRCLE('',#2372,5.);+#2372 = AXIS2_PLACEMENT_3D('',#2373,#2374,#2375);+#2373 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#2374 = DIRECTION('',(0.,0.,-1.));+#2375 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2376 = PCURVE('',#1679,#2377);+#2377 = DEFINITIONAL_REPRESENTATION('',(#2378),#2382);+#2378 = LINE('',#2379,#2380);+#2379 = CARTESIAN_POINT('',(6.28318530718,6.433333333333));+#2380 = VECTOR('',#2381,1.);+#2381 = DIRECTION('',(-1.,0.));+#2382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2383 = PCURVE('',#2355,#2384);+#2384 = DEFINITIONAL_REPRESENTATION('',(#2385),#2389);+#2385 = LINE('',#2386,#2387);+#2386 = CARTESIAN_POINT('',(6.28318530718,0.));+#2387 = VECTOR('',#2388,1.);+#2388 = DIRECTION('',(-1.,0.));+#2389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2390 = ORIENTED_EDGE('',*,*,#2391,.T.);+#2391 = EDGE_CURVE('',#2368,#2287,#2392,.T.);+#2392 = SURFACE_CURVE('',#2393,(#2398,#2405),.PCURVE_S1.);+#2393 = CIRCLE('',#2394,5.);+#2394 = AXIS2_PLACEMENT_3D('',#2395,#2396,#2397);+#2395 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#2396 = DIRECTION('',(0.,0.,-1.));+#2397 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2398 = PCURVE('',#1679,#2399);+#2399 = DEFINITIONAL_REPRESENTATION('',(#2400),#2404);+#2400 = LINE('',#2401,#2402);+#2401 = CARTESIAN_POINT('',(6.28318530718,6.433333333333));+#2402 = VECTOR('',#2403,1.);+#2403 = DIRECTION('',(-1.,0.));+#2404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2405 = PCURVE('',#2406,#2411);+#2406 = TOROIDAL_SURFACE('',#2407,4.333333333333,0.666666666667);+#2407 = AXIS2_PLACEMENT_3D('',#2408,#2409,#2410);+#2408 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#2409 = DIRECTION('',(0.,0.,1.));+#2410 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2411 = DEFINITIONAL_REPRESENTATION('',(#2412),#2416);+#2412 = LINE('',#2413,#2414);+#2413 = CARTESIAN_POINT('',(6.28318530718,0.));+#2414 = VECTOR('',#2415,1.);+#2415 = DIRECTION('',(-1.,0.));+#2416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2417 = ORIENTED_EDGE('',*,*,#2286,.F.);+#2418 = ADVANCED_FACE('',(#2419),#1949,.F.);+#2419 = FACE_BOUND('',#2420,.F.);+#2420 = EDGE_LOOP('',(#2421,#2444,#2445,#2446,#2469));+#2421 = ORIENTED_EDGE('',*,*,#2422,.T.);+#2422 = EDGE_CURVE('',#2423,#2038,#2425,.T.);+#2423 = VERTEX_POINT('',#2424);+#2424 = CARTESIAN_POINT('',(-6.,-0.45,0.));+#2425 = SURFACE_CURVE('',#2426,(#2430,#2437),.PCURVE_S1.);+#2426 = LINE('',#2427,#2428);+#2427 = CARTESIAN_POINT('',(-6.,-0.45,0.));+#2428 = VECTOR('',#2429,1.);+#2429 = DIRECTION('',(0.,0.,1.));+#2430 = PCURVE('',#1949,#2431);+#2431 = DEFINITIONAL_REPRESENTATION('',(#2432),#2436);+#2432 = LINE('',#2433,#2434);+#2433 = CARTESIAN_POINT('',(0.,0.));+#2434 = VECTOR('',#2435,1.);+#2435 = DIRECTION('',(0.,-1.));+#2436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2437 = PCURVE('',#2053,#2438);+#2438 = DEFINITIONAL_REPRESENTATION('',(#2439),#2443);+#2439 = LINE('',#2440,#2441);+#2440 = CARTESIAN_POINT('',(0.9,0.));+#2441 = VECTOR('',#2442,1.);+#2442 = DIRECTION('',(0.,-1.));+#2443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2444 = ORIENTED_EDGE('',*,*,#2065,.T.);+#2445 = ORIENTED_EDGE('',*,*,#1935,.T.);+#2446 = ORIENTED_EDGE('',*,*,#2447,.F.);+#2447 = EDGE_CURVE('',#2448,#1907,#2450,.T.);+#2448 = VERTEX_POINT('',#2449);+#2449 = CARTESIAN_POINT('',(-2.75,-0.45,0.));+#2450 = SURFACE_CURVE('',#2451,(#2455,#2462),.PCURVE_S1.);+#2451 = LINE('',#2452,#2453);+#2452 = CARTESIAN_POINT('',(-2.75,-0.45,0.));+#2453 = VECTOR('',#2454,1.);+#2454 = DIRECTION('',(0.,0.,1.));+#2455 = PCURVE('',#1949,#2456);+#2456 = DEFINITIONAL_REPRESENTATION('',(#2457),#2461);+#2457 = LINE('',#2458,#2459);+#2458 = CARTESIAN_POINT('',(3.25,0.));+#2459 = VECTOR('',#2460,1.);+#2460 = DIRECTION('',(0.,-1.));+#2461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2462 = PCURVE('',#1923,#2463);+#2463 = DEFINITIONAL_REPRESENTATION('',(#2464),#2468);+#2464 = LINE('',#2465,#2466);+#2465 = CARTESIAN_POINT('',(6.28318530718,0.));+#2466 = VECTOR('',#2467,1.);+#2467 = DIRECTION('',(0.,-1.));+#2468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2469 = ORIENTED_EDGE('',*,*,#2470,.F.);+#2470 = EDGE_CURVE('',#2423,#2448,#2471,.T.);+#2471 = SURFACE_CURVE('',#2472,(#2476,#2483),.PCURVE_S1.);+#2472 = LINE('',#2473,#2474);+#2473 = CARTESIAN_POINT('',(-6.,-0.45,0.));+#2474 = VECTOR('',#2475,1.);+#2475 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#2476 = PCURVE('',#1949,#2477);+#2477 = DEFINITIONAL_REPRESENTATION('',(#2478),#2482);+#2478 = LINE('',#2479,#2480);+#2479 = CARTESIAN_POINT('',(0.,0.));+#2480 = VECTOR('',#2481,1.);+#2481 = DIRECTION('',(1.,0.));+#2482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2483 = PCURVE('',#2484,#2489);+#2484 = PLANE('',#2485);+#2485 = AXIS2_PLACEMENT_3D('',#2486,#2487,#2488);+#2486 = CARTESIAN_POINT('',(-4.251343967025,5.206394781291E-16,0.));+#2487 = DIRECTION('',(0.,0.,1.));+#2488 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2489 = DEFINITIONAL_REPRESENTATION('',(#2490),#2494);+#2490 = LINE('',#2491,#2492);+#2491 = CARTESIAN_POINT('',(1.748656032975,0.45));+#2492 = VECTOR('',#2493,1.);+#2493 = DIRECTION('',(-1.,0.));+#2494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2495 = ADVANCED_FACE('',(#2496),#1923,.T.);+#2496 = FACE_BOUND('',#2497,.T.);+#2497 = EDGE_LOOP('',(#2498,#2522,#2543,#2544));+#2498 = ORIENTED_EDGE('',*,*,#2499,.T.);+#2499 = EDGE_CURVE('',#2448,#2500,#2502,.T.);+#2500 = VERTEX_POINT('',#2501);+#2501 = CARTESIAN_POINT('',(-2.75,0.45,0.));+#2502 = SURFACE_CURVE('',#2503,(#2508,#2515),.PCURVE_S1.);+#2503 = CIRCLE('',#2504,0.45);+#2504 = AXIS2_PLACEMENT_3D('',#2505,#2506,#2507);+#2505 = CARTESIAN_POINT('',(-2.75,3.367778697655E-16,0.));+#2506 = DIRECTION('',(0.,0.,1.));+#2507 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#2508 = PCURVE('',#1923,#2509);+#2509 = DEFINITIONAL_REPRESENTATION('',(#2510),#2514);+#2510 = LINE('',#2511,#2512);+#2511 = CARTESIAN_POINT('',(6.28318530718,0.));+#2512 = VECTOR('',#2513,1.);+#2513 = DIRECTION('',(-1.,0.));+#2514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2515 = PCURVE('',#2484,#2516);+#2516 = DEFINITIONAL_REPRESENTATION('',(#2517),#2521);+#2517 = CIRCLE('',#2518,0.45);+#2518 = AXIS2_PLACEMENT_2D('',#2519,#2520);+#2519 = CARTESIAN_POINT('',(-1.501343967025,1.74781994313E-29));+#2520 = DIRECTION('',(0.,1.));+#2521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2522 = ORIENTED_EDGE('',*,*,#2523,.T.);+#2523 = EDGE_CURVE('',#2500,#1879,#2524,.T.);+#2524 = SURFACE_CURVE('',#2525,(#2529,#2536),.PCURVE_S1.);+#2525 = LINE('',#2526,#2527);+#2526 = CARTESIAN_POINT('',(-2.75,0.45,0.));+#2527 = VECTOR('',#2528,1.);+#2528 = DIRECTION('',(0.,0.,1.));+#2529 = PCURVE('',#1923,#2530);+#2530 = DEFINITIONAL_REPRESENTATION('',(#2531),#2535);+#2531 = LINE('',#2532,#2533);+#2532 = CARTESIAN_POINT('',(3.14159265359,0.));+#2533 = VECTOR('',#2534,1.);+#2534 = DIRECTION('',(0.,-1.));+#2535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2536 = PCURVE('',#1894,#2537);+#2537 = DEFINITIONAL_REPRESENTATION('',(#2538),#2542);+#2538 = LINE('',#2539,#2540);+#2539 = CARTESIAN_POINT('',(0.,0.));+#2540 = VECTOR('',#2541,1.);+#2541 = DIRECTION('',(0.,-1.));+#2542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2543 = ORIENTED_EDGE('',*,*,#1906,.F.);+#2544 = ORIENTED_EDGE('',*,*,#2447,.F.);+#2545 = ADVANCED_FACE('',(#2546),#1894,.F.);+#2546 = FACE_BOUND('',#2547,.F.);+#2547 = EDGE_LOOP('',(#2548,#2549,#2550,#2551,#2574));+#2548 = ORIENTED_EDGE('',*,*,#2523,.T.);+#2549 = ORIENTED_EDGE('',*,*,#1878,.T.);+#2550 = ORIENTED_EDGE('',*,*,#2014,.T.);+#2551 = ORIENTED_EDGE('',*,*,#2552,.F.);+#2552 = EDGE_CURVE('',#2553,#2015,#2555,.T.);+#2553 = VERTEX_POINT('',#2554);+#2554 = CARTESIAN_POINT('',(-6.,0.45,0.));+#2555 = SURFACE_CURVE('',#2556,(#2560,#2567),.PCURVE_S1.);+#2556 = LINE('',#2557,#2558);+#2557 = CARTESIAN_POINT('',(-6.,0.45,0.));+#2558 = VECTOR('',#2559,1.);+#2559 = DIRECTION('',(0.,0.,1.));+#2560 = PCURVE('',#1894,#2561);+#2561 = DEFINITIONAL_REPRESENTATION('',(#2562),#2566);+#2562 = LINE('',#2563,#2564);+#2563 = CARTESIAN_POINT('',(3.25,0.));+#2564 = VECTOR('',#2565,1.);+#2565 = DIRECTION('',(0.,-1.));+#2566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2567 = PCURVE('',#2053,#2568);+#2568 = DEFINITIONAL_REPRESENTATION('',(#2569),#2573);+#2569 = LINE('',#2570,#2571);+#2570 = CARTESIAN_POINT('',(0.,0.));+#2571 = VECTOR('',#2572,1.);+#2572 = DIRECTION('',(0.,-1.));+#2573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2574 = ORIENTED_EDGE('',*,*,#2575,.F.);+#2575 = EDGE_CURVE('',#2500,#2553,#2576,.T.);+#2576 = SURFACE_CURVE('',#2577,(#2581,#2588),.PCURVE_S1.);+#2577 = LINE('',#2578,#2579);+#2578 = CARTESIAN_POINT('',(-2.75,0.45,0.));+#2579 = VECTOR('',#2580,1.);+#2580 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2581 = PCURVE('',#1894,#2582);+#2582 = DEFINITIONAL_REPRESENTATION('',(#2583),#2587);+#2583 = LINE('',#2584,#2585);+#2584 = CARTESIAN_POINT('',(0.,0.));+#2585 = VECTOR('',#2586,1.);+#2586 = DIRECTION('',(1.,0.));+#2587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2588 = PCURVE('',#2484,#2589);+#2589 = DEFINITIONAL_REPRESENTATION('',(#2590),#2594);+#2590 = LINE('',#2591,#2592);+#2591 = CARTESIAN_POINT('',(-1.501343967025,-0.45));+#2592 = VECTOR('',#2593,1.);+#2593 = DIRECTION('',(1.,0.));+#2594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2595 = ADVANCED_FACE('',(#2596),#1816,.F.);+#2596 = FACE_BOUND('',#2597,.F.);+#2597 = EDGE_LOOP('',(#2598,#2621,#2622,#2623,#2646));+#2598 = ORIENTED_EDGE('',*,*,#2599,.T.);+#2599 = EDGE_CURVE('',#2600,#2233,#2602,.T.);+#2600 = VERTEX_POINT('',#2601);+#2601 = CARTESIAN_POINT('',(6.,0.45,0.));+#2602 = SURFACE_CURVE('',#2603,(#2607,#2614),.PCURVE_S1.);+#2603 = LINE('',#2604,#2605);+#2604 = CARTESIAN_POINT('',(6.,0.45,0.));+#2605 = VECTOR('',#2606,1.);+#2606 = DIRECTION('',(0.,0.,1.));+#2607 = PCURVE('',#1816,#2608);+#2608 = DEFINITIONAL_REPRESENTATION('',(#2609),#2613);+#2609 = LINE('',#2610,#2611);+#2610 = CARTESIAN_POINT('',(0.,0.));+#2611 = VECTOR('',#2612,1.);+#2612 = DIRECTION('',(0.,-1.));+#2613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2614 = PCURVE('',#2248,#2615);+#2615 = DEFINITIONAL_REPRESENTATION('',(#2616),#2620);+#2616 = LINE('',#2617,#2618);+#2617 = CARTESIAN_POINT('',(0.9,0.));+#2618 = VECTOR('',#2619,1.);+#2619 = DIRECTION('',(0.,-1.));+#2620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2621 = ORIENTED_EDGE('',*,*,#2260,.T.);+#2622 = ORIENTED_EDGE('',*,*,#1802,.T.);+#2623 = ORIENTED_EDGE('',*,*,#2624,.F.);+#2624 = EDGE_CURVE('',#2625,#1774,#2627,.T.);+#2625 = VERTEX_POINT('',#2626);+#2626 = CARTESIAN_POINT('',(2.75,0.45,0.));+#2627 = SURFACE_CURVE('',#2628,(#2632,#2639),.PCURVE_S1.);+#2628 = LINE('',#2629,#2630);+#2629 = CARTESIAN_POINT('',(2.75,0.45,0.));+#2630 = VECTOR('',#2631,1.);+#2631 = DIRECTION('',(0.,0.,1.));+#2632 = PCURVE('',#1816,#2633);+#2633 = DEFINITIONAL_REPRESENTATION('',(#2634),#2638);+#2634 = LINE('',#2635,#2636);+#2635 = CARTESIAN_POINT('',(3.25,0.));+#2636 = VECTOR('',#2637,1.);+#2637 = DIRECTION('',(0.,-1.));+#2638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2639 = PCURVE('',#1790,#2640);+#2640 = DEFINITIONAL_REPRESENTATION('',(#2641),#2645);+#2641 = LINE('',#2642,#2643);+#2642 = CARTESIAN_POINT('',(6.28318530718,0.));+#2643 = VECTOR('',#2644,1.);+#2644 = DIRECTION('',(0.,-1.));+#2645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2646 = ORIENTED_EDGE('',*,*,#2647,.F.);+#2647 = EDGE_CURVE('',#2600,#2625,#2648,.T.);+#2648 = SURFACE_CURVE('',#2649,(#2653,#2660),.PCURVE_S1.);+#2649 = LINE('',#2650,#2651);+#2650 = CARTESIAN_POINT('',(6.,0.45,0.));+#2651 = VECTOR('',#2652,1.);+#2652 = DIRECTION('',(-1.,2.449293598295E-16,0.));+#2653 = PCURVE('',#1816,#2654);+#2654 = DEFINITIONAL_REPRESENTATION('',(#2655),#2659);+#2655 = LINE('',#2656,#2657);+#2656 = CARTESIAN_POINT('',(0.,0.));+#2657 = VECTOR('',#2658,1.);+#2658 = DIRECTION('',(1.,0.));+#2659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2660 = PCURVE('',#2661,#2666);+#2661 = PLANE('',#2662);+#2662 = AXIS2_PLACEMENT_3D('',#2663,#2664,#2665);+#2663 = CARTESIAN_POINT('',(4.251343967025,-1.041278956258E-15,0.));+#2664 = DIRECTION('',(0.,0.,1.));+#2665 = DIRECTION('',(1.,-2.449293598295E-16,0.));+#2666 = DEFINITIONAL_REPRESENTATION('',(#2667),#2671);+#2667 = LINE('',#2668,#2669);+#2668 = CARTESIAN_POINT('',(1.748656032975,0.45));+#2669 = VECTOR('',#2670,1.);+#2670 = DIRECTION('',(-1.,0.));+#2671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2672 = ADVANCED_FACE('',(#2673),#1790,.T.);+#2673 = FACE_BOUND('',#2674,.T.);+#2674 = EDGE_LOOP('',(#2675,#2699,#2720,#2721));+#2675 = ORIENTED_EDGE('',*,*,#2676,.T.);+#2676 = EDGE_CURVE('',#2625,#2677,#2679,.T.);+#2677 = VERTEX_POINT('',#2678);+#2678 = CARTESIAN_POINT('',(2.75,-0.45,0.));+#2679 = SURFACE_CURVE('',#2680,(#2685,#2692),.PCURVE_S1.);+#2680 = CIRCLE('',#2681,0.45);+#2681 = AXIS2_PLACEMENT_3D('',#2682,#2683,#2684);+#2682 = CARTESIAN_POINT('',(2.75,-6.73555739531E-16,0.));+#2683 = DIRECTION('',(0.,-0.,1.));+#2684 = DIRECTION('',(2.449293598295E-16,1.,0.));+#2685 = PCURVE('',#1790,#2686);+#2686 = DEFINITIONAL_REPRESENTATION('',(#2687),#2691);+#2687 = LINE('',#2688,#2689);+#2688 = CARTESIAN_POINT('',(6.28318530718,0.));+#2689 = VECTOR('',#2690,1.);+#2690 = DIRECTION('',(-1.,0.));+#2691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2692 = PCURVE('',#2661,#2693);+#2693 = DEFINITIONAL_REPRESENTATION('',(#2694),#2698);+#2694 = CIRCLE('',#2695,0.45);+#2695 = AXIS2_PLACEMENT_2D('',#2696,#2697);+#2696 = CARTESIAN_POINT('',(-1.501343967025,-3.151499316358E-28));+#2697 = DIRECTION('',(0.,1.));+#2698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2699 = ORIENTED_EDGE('',*,*,#2700,.T.);+#2700 = EDGE_CURVE('',#2677,#1746,#2701,.T.);+#2701 = SURFACE_CURVE('',#2702,(#2706,#2713),.PCURVE_S1.);+#2702 = LINE('',#2703,#2704);+#2703 = CARTESIAN_POINT('',(2.75,-0.45,0.));+#2704 = VECTOR('',#2705,1.);+#2705 = DIRECTION('',(0.,0.,1.));+#2706 = PCURVE('',#1790,#2707);+#2707 = DEFINITIONAL_REPRESENTATION('',(#2708),#2712);+#2708 = LINE('',#2709,#2710);+#2709 = CARTESIAN_POINT('',(3.14159265359,0.));+#2710 = VECTOR('',#2711,1.);+#2711 = DIRECTION('',(0.,-1.));+#2712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2713 = PCURVE('',#1761,#2714);+#2714 = DEFINITIONAL_REPRESENTATION('',(#2715),#2719);+#2715 = LINE('',#2716,#2717);+#2716 = CARTESIAN_POINT('',(0.,0.));+#2717 = VECTOR('',#2718,1.);+#2718 = DIRECTION('',(0.,-1.));+#2719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2720 = ORIENTED_EDGE('',*,*,#1773,.F.);+#2721 = ORIENTED_EDGE('',*,*,#2624,.F.);+#2722 = ADVANCED_FACE('',(#2723),#1761,.F.);+#2723 = FACE_BOUND('',#2724,.F.);+#2724 = EDGE_LOOP('',(#2725,#2726,#2727,#2728,#2751));+#2725 = ORIENTED_EDGE('',*,*,#2700,.T.);+#2726 = ORIENTED_EDGE('',*,*,#1745,.T.);+#2727 = ORIENTED_EDGE('',*,*,#2209,.T.);+#2728 = ORIENTED_EDGE('',*,*,#2729,.F.);+#2729 = EDGE_CURVE('',#2730,#2210,#2732,.T.);+#2730 = VERTEX_POINT('',#2731);+#2731 = CARTESIAN_POINT('',(6.,-0.45,0.));+#2732 = SURFACE_CURVE('',#2733,(#2737,#2744),.PCURVE_S1.);+#2733 = LINE('',#2734,#2735);+#2734 = CARTESIAN_POINT('',(6.,-0.45,0.));+#2735 = VECTOR('',#2736,1.);+#2736 = DIRECTION('',(0.,0.,1.));+#2737 = PCURVE('',#1761,#2738);+#2738 = DEFINITIONAL_REPRESENTATION('',(#2739),#2743);+#2739 = LINE('',#2740,#2741);+#2740 = CARTESIAN_POINT('',(3.25,0.));+#2741 = VECTOR('',#2742,1.);+#2742 = DIRECTION('',(0.,-1.));+#2743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2744 = PCURVE('',#2248,#2745);+#2745 = DEFINITIONAL_REPRESENTATION('',(#2746),#2750);+#2746 = LINE('',#2747,#2748);+#2747 = CARTESIAN_POINT('',(0.,0.));+#2748 = VECTOR('',#2749,1.);+#2749 = DIRECTION('',(0.,-1.));+#2750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2751 = ORIENTED_EDGE('',*,*,#2752,.F.);+#2752 = EDGE_CURVE('',#2677,#2730,#2753,.T.);+#2753 = SURFACE_CURVE('',#2754,(#2758,#2765),.PCURVE_S1.);+#2754 = LINE('',#2755,#2756);+#2755 = CARTESIAN_POINT('',(2.75,-0.45,0.));+#2756 = VECTOR('',#2757,1.);+#2757 = DIRECTION('',(1.,-2.449293598295E-16,0.));+#2758 = PCURVE('',#1761,#2759);+#2759 = DEFINITIONAL_REPRESENTATION('',(#2760),#2764);+#2760 = LINE('',#2761,#2762);+#2761 = CARTESIAN_POINT('',(0.,0.));+#2762 = VECTOR('',#2763,1.);+#2763 = DIRECTION('',(1.,0.));+#2764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2765 = PCURVE('',#2661,#2766);+#2766 = DEFINITIONAL_REPRESENTATION('',(#2767),#2771);+#2767 = LINE('',#2768,#2769);+#2768 = CARTESIAN_POINT('',(-1.501343967025,-0.45));+#2769 = VECTOR('',#2770,1.);+#2770 = DIRECTION('',(1.,0.));+#2771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2772 = ADVANCED_FACE('',(#2773),#2053,.F.);+#2773 = FACE_BOUND('',#2774,.F.);+#2774 = EDGE_LOOP('',(#2775,#2776,#2777,#2778));+#2775 = ORIENTED_EDGE('',*,*,#2552,.T.);+#2776 = ORIENTED_EDGE('',*,*,#2037,.T.);+#2777 = ORIENTED_EDGE('',*,*,#2422,.F.);+#2778 = ORIENTED_EDGE('',*,*,#2779,.F.);+#2779 = EDGE_CURVE('',#2553,#2423,#2780,.T.);+#2780 = SURFACE_CURVE('',#2781,(#2785,#2792),.PCURVE_S1.);+#2781 = LINE('',#2782,#2783);+#2782 = CARTESIAN_POINT('',(-6.,0.45,0.));+#2783 = VECTOR('',#2784,1.);+#2784 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#2785 = PCURVE('',#2053,#2786);+#2786 = DEFINITIONAL_REPRESENTATION('',(#2787),#2791);+#2787 = LINE('',#2788,#2789);+#2788 = CARTESIAN_POINT('',(0.,0.));+#2789 = VECTOR('',#2790,1.);+#2790 = DIRECTION('',(1.,0.));+#2791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2792 = PCURVE('',#2484,#2793);+#2793 = DEFINITIONAL_REPRESENTATION('',(#2794),#2798);+#2794 = LINE('',#2795,#2796);+#2795 = CARTESIAN_POINT('',(1.748656032975,-0.45));+#2796 = VECTOR('',#2797,1.);+#2797 = DIRECTION('',(0.,1.));+#2798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2799 = ADVANCED_FACE('',(#2800),#2248,.F.);+#2800 = FACE_BOUND('',#2801,.F.);+#2801 = EDGE_LOOP('',(#2802,#2803,#2804,#2805));+#2802 = ORIENTED_EDGE('',*,*,#2729,.T.);+#2803 = ORIENTED_EDGE('',*,*,#2232,.T.);+#2804 = ORIENTED_EDGE('',*,*,#2599,.F.);+#2805 = ORIENTED_EDGE('',*,*,#2806,.F.);+#2806 = EDGE_CURVE('',#2730,#2600,#2807,.T.);+#2807 = SURFACE_CURVE('',#2808,(#2812,#2819),.PCURVE_S1.);+#2808 = LINE('',#2809,#2810);+#2809 = CARTESIAN_POINT('',(6.,-0.45,0.));+#2810 = VECTOR('',#2811,1.);+#2811 = DIRECTION('',(2.449293598295E-16,1.,0.));+#2812 = PCURVE('',#2248,#2813);+#2813 = DEFINITIONAL_REPRESENTATION('',(#2814),#2818);+#2814 = LINE('',#2815,#2816);+#2815 = CARTESIAN_POINT('',(0.,0.));+#2816 = VECTOR('',#2817,1.);+#2817 = DIRECTION('',(1.,0.));+#2818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2819 = PCURVE('',#2661,#2820);+#2820 = DEFINITIONAL_REPRESENTATION('',(#2821),#2825);+#2821 = LINE('',#2822,#2823);+#2822 = CARTESIAN_POINT('',(1.748656032975,-0.45));+#2823 = VECTOR('',#2824,1.);+#2824 = DIRECTION('',(0.,1.));+#2825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2826 = ADVANCED_FACE('',(#2827),#2326,.T.);+#2827 = FACE_BOUND('',#2828,.T.);+#2828 = EDGE_LOOP('',(#2829,#2860,#2939,#2940));+#2829 = ORIENTED_EDGE('',*,*,#2830,.T.);+#2830 = EDGE_CURVE('',#2831,#2833,#2835,.T.);+#2831 = VERTEX_POINT('',#2832);+#2832 = CARTESIAN_POINT('',(-4.333333333333,5.306802796305E-16,10.5));+#2833 = VERTEX_POINT('',#2834);+#2834 = CARTESIAN_POINT('',(1.5,4.06543697255,10.5));+#2835 = SURFACE_CURVE('',#2836,(#2841,#2848),.PCURVE_S1.);+#2836 = CIRCLE('',#2837,4.333333333333);+#2837 = AXIS2_PLACEMENT_3D('',#2838,#2839,#2840);+#2838 = CARTESIAN_POINT('',(0.,0.,10.5));+#2839 = DIRECTION('',(0.,0.,-1.));+#2840 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2841 = PCURVE('',#2326,#2842);+#2842 = DEFINITIONAL_REPRESENTATION('',(#2843),#2847);+#2843 = LINE('',#2844,#2845);+#2844 = CARTESIAN_POINT('',(6.28318530718,1.570796326795));+#2845 = VECTOR('',#2846,1.);+#2846 = DIRECTION('',(-1.,1.1539192263E-16));+#2847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2848 = PCURVE('',#2849,#2854);+#2849 = PLANE('',#2850);+#2850 = AXIS2_PLACEMENT_3D('',#2851,#2852,#2853);+#2851 = CARTESIAN_POINT('',(0.,0.,10.5));+#2852 = DIRECTION('',(-0.,0.,-1.));+#2853 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2854 = DEFINITIONAL_REPRESENTATION('',(#2855),#2859);+#2855 = CIRCLE('',#2856,4.333333333333);+#2856 = AXIS2_PLACEMENT_2D('',#2857,#2858);+#2857 = CARTESIAN_POINT('',(0.,0.));+#2858 = DIRECTION('',(1.,0.));+#2859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2860 = ORIENTED_EDGE('',*,*,#2861,.F.);+#2861 = EDGE_CURVE('',#2310,#2833,#2862,.T.);+#2862 = SURFACE_CURVE('',#2863,(#2881,#2910),.PCURVE_S1.);+#2863 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#2864,#2865,#2866,#2867,#2868,+    #2869,#2870,#2871,#2872,#2873,#2874,#2875,#2876,#2877,#2878,#2879,+    #2880),.UNSPECIFIED.,.F.,.F.,(7,5,5,7),(0.,0.292545836451,+    0.586684026067,1.),.UNSPECIFIED.);+#2864 = CARTESIAN_POINT('',(1.5,4.769696007085,9.833333333333));+#2865 = CARTESIAN_POINT('',(1.5,4.769696001668,9.8850036969));+#2866 = CARTESIAN_POINT('',(1.5,4.76465814093,9.936677106424));+#2867 = CARTESIAN_POINT('',(1.5,4.754581984896,9.987765117896));+#2868 = CARTESIAN_POINT('',(1.5,4.739571435322,10.037690905455));+#2869 = CARTESIAN_POINT('',(1.5,4.719826328517,10.085906943179));+#2870 = CARTESIAN_POINT('',(1.5,4.671310046965,10.178168843933));+#2871 = CARTESIAN_POINT('',(1.5,4.642487760068,10.222195378082));+#2872 = CARTESIAN_POINT('',(1.5,4.609458171659,10.263484248631));+#2873 = CARTESIAN_POINT('',(1.5,4.572590629578,10.301592557186));+#2874 = CARTESIAN_POINT('',(1.5,4.532315346484,10.336148036577));+#2875 = CARTESIAN_POINT('',(1.5,4.428389066153,10.410002586264));+#2876 = CARTESIAN_POINT('',(1.5,4.361871499493,10.445556014408));+#2877 = CARTESIAN_POINT('',(1.5,4.290865344823,10.472691103556));+#2878 = CARTESIAN_POINT('',(1.5,4.216810183434,10.490911731197));+#2879 = CARTESIAN_POINT('',(1.5,4.141175889764,10.499999992917));+#2880 = CARTESIAN_POINT('',(1.5,4.06543697255,10.5));+#2881 = PCURVE('',#2326,#2882);+#2882 = DEFINITIONAL_REPRESENTATION('',(#2883),#2909);+#2883 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2884,#2885,#2886,#2887,#2888,+    #2889,#2890,#2891,#2892,#2893,#2894,#2895,#2896,#2897,#2898,#2899,+    #2900,#2901,#2902,#2903,#2904,#2905,#2906,#2907,#2908),+  .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),+  (0.,4.545454545455E-02,9.090909090909E-02,0.136363636364,+    0.181818181818,0.227272727273,0.272727272727,0.318181818182,+    0.363636363636,0.409090909091,0.454545454545,0.5,0.545454545455,+    0.590909090909,0.636363636364,0.681818181818,0.727272727273,+    0.772727272727,0.818181818182,0.863636363636,0.909090909091,+    0.954545454545,1.),.QUASI_UNIFORM_KNOTS.);+#2884 = CARTESIAN_POINT('',(4.407696326369,0.));+#2885 = CARTESIAN_POINT('',(4.407696357461,2.408517540258E-02));+#2886 = CARTESIAN_POINT('',(4.407623327474,7.225583531193E-02));+#2887 = CARTESIAN_POINT('',(4.407295101134,0.144497066386));+#2888 = CARTESIAN_POINT('',(4.406748643608,0.216707118002));+#2889 = CARTESIAN_POINT('',(4.405984912466,0.288872140468));+#2890 = CARTESIAN_POINT('',(4.405005207407,0.360978787227));+#2891 = CARTESIAN_POINT('',(4.403811238483,0.433013963249));+#2892 = CARTESIAN_POINT('',(4.402405176011,0.504963170322));+#2893 = CARTESIAN_POINT('',(4.400789518835,0.576818913807));+#2894 = CARTESIAN_POINT('',(4.398967320195,0.648569991781));+#2895 = CARTESIAN_POINT('',(4.396942068163,0.720209200247));+#2896 = CARTESIAN_POINT('',(4.394717769889,0.791730911436));+#2897 = CARTESIAN_POINT('',(4.392298992007,0.863131185773));+#2898 = CARTESIAN_POINT('',(4.389690990782,0.934405643142));+#2899 = CARTESIAN_POINT('',(4.386899571863,1.00555496415));+#2900 = CARTESIAN_POINT('',(4.383931294584,1.076580587345));+#2901 = CARTESIAN_POINT('',(4.380793542491,1.147484909311));+#2902 = CARTESIAN_POINT('',(4.377494493213,1.2182736097));+#2903 = CARTESIAN_POINT('',(4.374043244126,1.288954331483));+#2904 = CARTESIAN_POINT('',(4.370449888442,1.359536487991));+#2905 = CARTESIAN_POINT('',(4.366725666485,1.430030887454));+#2906 = CARTESIAN_POINT('',(4.362882891926,1.500449379528));+#2907 = CARTESIAN_POINT('',(4.360251444937,1.547352965378));+#2908 = CARTESIAN_POINT('',(4.358920593807,1.570796326795));+#2909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2910 = PCURVE('',#2355,#2911);+#2911 = DEFINITIONAL_REPRESENTATION('',(#2912),#2938);+#2912 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#2913,#2914,#2915,#2916,#2917,+    #2918,#2919,#2920,#2921,#2922,#2923,#2924,#2925,#2926,#2927,#2928,+    #2929,#2930,#2931,#2932,#2933,#2934,#2935,#2936,#2937),+  .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),+  (0.,4.545454545455E-02,9.090909090909E-02,0.136363636364,+    0.181818181818,0.227272727273,0.272727272727,0.318181818182,+    0.363636363636,0.409090909091,0.454545454545,0.5,0.545454545455,+    0.590909090909,0.636363636364,0.681818181818,0.727272727273,+    0.772727272727,0.818181818182,0.863636363636,0.909090909091,+    0.954545454545,1.),.QUASI_UNIFORM_KNOTS.);+#2913 = CARTESIAN_POINT('',(4.407696326369,0.));+#2914 = CARTESIAN_POINT('',(4.407696357461,2.408517540258E-02));+#2915 = CARTESIAN_POINT('',(4.407623327474,7.225583531193E-02));+#2916 = CARTESIAN_POINT('',(4.407295101134,0.144497066386));+#2917 = CARTESIAN_POINT('',(4.406748643608,0.216707118002));+#2918 = CARTESIAN_POINT('',(4.405984912466,0.288872140468));+#2919 = CARTESIAN_POINT('',(4.405005207407,0.360978787227));+#2920 = CARTESIAN_POINT('',(4.403811238483,0.433013963249));+#2921 = CARTESIAN_POINT('',(4.402405176011,0.504963170322));+#2922 = CARTESIAN_POINT('',(4.400789518835,0.576818913807));+#2923 = CARTESIAN_POINT('',(4.398967320195,0.648569991781));+#2924 = CARTESIAN_POINT('',(4.396942068163,0.720209200247));+#2925 = CARTESIAN_POINT('',(4.394717769889,0.791730911436));+#2926 = CARTESIAN_POINT('',(4.392298992007,0.863131185773));+#2927 = CARTESIAN_POINT('',(4.389690990782,0.934405643142));+#2928 = CARTESIAN_POINT('',(4.386899571863,1.00555496415));+#2929 = CARTESIAN_POINT('',(4.383931294584,1.076580587345));+#2930 = CARTESIAN_POINT('',(4.380793542491,1.147484909311));+#2931 = CARTESIAN_POINT('',(4.377494493213,1.2182736097));+#2932 = CARTESIAN_POINT('',(4.374043244126,1.288954331483));+#2933 = CARTESIAN_POINT('',(4.370449888442,1.359536487991));+#2934 = CARTESIAN_POINT('',(4.366725666485,1.430030887454));+#2935 = CARTESIAN_POINT('',(4.362882891926,1.500449379528));+#2936 = CARTESIAN_POINT('',(4.360251444937,1.547352965378));+#2937 = CARTESIAN_POINT('',(4.358920593807,1.570796326795));+#2938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2939 = ORIENTED_EDGE('',*,*,#2309,.F.);+#2940 = ORIENTED_EDGE('',*,*,#2941,.T.);+#2941 = EDGE_CURVE('',#2287,#2831,#2942,.T.);+#2942 = SURFACE_CURVE('',#2943,(#2948,#2955),.PCURVE_S1.);+#2943 = CIRCLE('',#2944,0.666666666667);+#2944 = AXIS2_PLACEMENT_3D('',#2945,#2946,#2947);+#2945 = CARTESIAN_POINT('',(-4.333333333333,5.306802796305E-16,+    9.833333333333));+#2946 = DIRECTION('',(1.224646799147E-16,1.,-0.));+#2947 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2948 = PCURVE('',#2326,#2949);+#2949 = DEFINITIONAL_REPRESENTATION('',(#2950),#2954);+#2950 = LINE('',#2951,#2952);+#2951 = CARTESIAN_POINT('',(6.28318530718,0.));+#2952 = VECTOR('',#2953,1.);+#2953 = DIRECTION('',(0.,1.));+#2954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2955 = PCURVE('',#2406,#2956);+#2956 = DEFINITIONAL_REPRESENTATION('',(#2957),#2961);+#2957 = LINE('',#2958,#2959);+#2958 = CARTESIAN_POINT('',(0.,0.));+#2959 = VECTOR('',#2960,1.);+#2960 = DIRECTION('',(0.,1.));+#2961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2962 = ADVANCED_FACE('',(#2963),#2355,.T.);+#2963 = FACE_BOUND('',#2964,.T.);+#2964 = EDGE_LOOP('',(#2965,#2998,#3077,#3078,#3079));+#2965 = ORIENTED_EDGE('',*,*,#2966,.T.);+#2966 = EDGE_CURVE('',#2833,#2967,#2969,.T.);+#2967 = VERTEX_POINT('',#2968);+#2968 = CARTESIAN_POINT('',(1.5,-4.06543697255,10.5));+#2969 = SURFACE_CURVE('',#2970,(#2975,#2982),.PCURVE_S1.);+#2970 = CIRCLE('',#2971,4.333333333333);+#2971 = AXIS2_PLACEMENT_3D('',#2972,#2973,#2974);+#2972 = CARTESIAN_POINT('',(0.,0.,10.5));+#2973 = DIRECTION('',(0.,0.,-1.));+#2974 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2975 = PCURVE('',#2355,#2976);+#2976 = DEFINITIONAL_REPRESENTATION('',(#2977),#2981);+#2977 = LINE('',#2978,#2979);+#2978 = CARTESIAN_POINT('',(6.28318530718,1.570796326795));+#2979 = VECTOR('',#2980,1.);+#2980 = DIRECTION('',(-1.,-9.120163827234E-17));+#2981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2982 = PCURVE('',#2983,#2988);+#2983 = PLANE('',#2984);+#2984 = AXIS2_PLACEMENT_3D('',#2985,#2986,#2987);+#2985 = CARTESIAN_POINT('',(5.,5.,10.5));+#2986 = DIRECTION('',(0.,0.,1.));+#2987 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#2988 = DEFINITIONAL_REPRESENTATION('',(#2989),#2997);+#2989 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2990,#2991,#2992,#2993,+#2994,#2995,#2996),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2+    ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786,+6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,+1.,0.5,1.)) REPRESENTATION_ITEM('') );+#2990 = CARTESIAN_POINT('',(9.333333333333,5.));+#2991 = CARTESIAN_POINT('',(9.333333333333,-2.505553499465));+#2992 = CARTESIAN_POINT('',(2.833333333334,1.247223250268));+#2993 = CARTESIAN_POINT('',(-3.666666666666,5.));+#2994 = CARTESIAN_POINT('',(2.833333333333,8.752776749732));+#2995 = CARTESIAN_POINT('',(9.333333333333,12.505553499465));+#2996 = CARTESIAN_POINT('',(9.333333333333,5.));+#2997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#2998 = ORIENTED_EDGE('',*,*,#2999,.F.);+#2999 = EDGE_CURVE('',#2368,#2967,#3000,.T.);+#3000 = SURFACE_CURVE('',#3001,(#3019,#3048),.PCURVE_S1.);+#3001 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#3002,#3003,#3004,#3005,#3006,+    #3007,#3008,#3009,#3010,#3011,#3012,#3013,#3014,#3015,#3016,#3017,+    #3018),.UNSPECIFIED.,.F.,.F.,(7,5,5,7),(0.,0.29254583645,+    0.586684026066,1.),.UNSPECIFIED.);+#3002 = CARTESIAN_POINT('',(1.5,-4.769696007085,9.833333333333));+#3003 = CARTESIAN_POINT('',(1.5,-4.769696001668,9.8850036969));+#3004 = CARTESIAN_POINT('',(1.5,-4.76465814093,9.936677106424));+#3005 = CARTESIAN_POINT('',(1.5,-4.754581984896,9.987765117896));+#3006 = CARTESIAN_POINT('',(1.5,-4.739571435322,10.037690905455));+#3007 = CARTESIAN_POINT('',(1.5,-4.719826328517,10.085906943179));+#3008 = CARTESIAN_POINT('',(1.5,-4.671310046966,10.178168843933));+#3009 = CARTESIAN_POINT('',(1.5,-4.642487760068,10.222195378082));+#3010 = CARTESIAN_POINT('',(1.5,-4.609458171659,10.26348424863));+#3011 = CARTESIAN_POINT('',(1.5,-4.572590629578,10.301592557186));+#3012 = CARTESIAN_POINT('',(1.5,-4.532315346484,10.336148036576));+#3013 = CARTESIAN_POINT('',(1.5,-4.428389066154,10.410002586264));+#3014 = CARTESIAN_POINT('',(1.5,-4.361871499493,10.445556014408));+#3015 = CARTESIAN_POINT('',(1.5,-4.290865344823,10.472691103556));+#3016 = CARTESIAN_POINT('',(1.5,-4.216810183435,10.490911731197));+#3017 = CARTESIAN_POINT('',(1.5,-4.141175889764,10.499999992917));+#3018 = CARTESIAN_POINT('',(1.5,-4.06543697255,10.5));+#3019 = PCURVE('',#2355,#3020);+#3020 = DEFINITIONAL_REPRESENTATION('',(#3021),#3047);+#3021 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3022,#3023,#3024,#3025,#3026,+    #3027,#3028,#3029,#3030,#3031,#3032,#3033,#3034,#3035,#3036,#3037,+    #3038,#3039,#3040,#3041,#3042,#3043,#3044,#3045,#3046),+  .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),+  (0.,4.545454545455E-02,9.090909090909E-02,0.136363636364,+    0.181818181818,0.227272727273,0.272727272727,0.318181818182,+    0.363636363636,0.409090909091,0.454545454545,0.5,0.545454545455,+    0.590909090909,0.636363636364,0.681818181818,0.727272727273,+    0.772727272727,0.818181818182,0.863636363636,0.909090909091,+    0.954545454545,1.),.QUASI_UNIFORM_KNOTS.);+#3022 = CARTESIAN_POINT('',(1.87548898081,0.));+#3023 = CARTESIAN_POINT('',(1.875488949719,2.408517540266E-02));+#3024 = CARTESIAN_POINT('',(1.875561979705,7.225583531217E-02));+#3025 = CARTESIAN_POINT('',(1.875890206046,0.144497066386));+#3026 = CARTESIAN_POINT('',(1.876436663572,0.216707118003));+#3027 = CARTESIAN_POINT('',(1.877200394714,0.288872140469));+#3028 = CARTESIAN_POINT('',(1.878180099773,0.360978787228));+#3029 = CARTESIAN_POINT('',(1.879374068697,0.43301396325));+#3030 = CARTESIAN_POINT('',(1.880780131169,0.504963170323));+#3031 = CARTESIAN_POINT('',(1.882395788345,0.576818913808));+#3032 = CARTESIAN_POINT('',(1.884217986984,0.648569991782));+#3033 = CARTESIAN_POINT('',(1.886243239016,0.720209200248));+#3034 = CARTESIAN_POINT('',(1.88846753729,0.791730911437));+#3035 = CARTESIAN_POINT('',(1.890886315173,0.863131185774));+#3036 = CARTESIAN_POINT('',(1.893494316397,0.934405643142));+#3037 = CARTESIAN_POINT('',(1.896285735317,1.00555496415));+#3038 = CARTESIAN_POINT('',(1.899254012595,1.076580587345));+#3039 = CARTESIAN_POINT('',(1.902391764688,1.147484909312));+#3040 = CARTESIAN_POINT('',(1.905690813966,1.218273609701));+#3041 = CARTESIAN_POINT('',(1.909142063054,1.288954331483));+#3042 = CARTESIAN_POINT('',(1.912735418738,1.359536487991));+#3043 = CARTESIAN_POINT('',(1.916459640695,1.430030887454));+#3044 = CARTESIAN_POINT('',(1.920302415254,1.500449379528));+#3045 = CARTESIAN_POINT('',(1.922933862242,1.547352965378));+#3046 = CARTESIAN_POINT('',(1.924264713372,1.570796326795));+#3047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3048 = PCURVE('',#2406,#3049);+#3049 = DEFINITIONAL_REPRESENTATION('',(#3050),#3076);+#3050 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#3051,#3052,#3053,#3054,#3055,+    #3056,#3057,#3058,#3059,#3060,#3061,#3062,#3063,#3064,#3065,#3066,+    #3067,#3068,#3069,#3070,#3071,#3072,#3073,#3074,#3075),+  .UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,4),+  (0.,4.545454545455E-02,9.090909090909E-02,0.136363636364,+    0.181818181818,0.227272727273,0.272727272727,0.318181818182,+    0.363636363636,0.409090909091,0.454545454545,0.5,0.545454545455,+    0.590909090909,0.636363636364,0.681818181818,0.727272727273,+    0.772727272727,0.818181818182,0.863636363636,0.909090909091,+    0.954545454545,1.),.QUASI_UNIFORM_KNOTS.);+#3051 = CARTESIAN_POINT('',(1.87548898081,0.));+#3052 = CARTESIAN_POINT('',(1.875488949719,2.408517540266E-02));+#3053 = CARTESIAN_POINT('',(1.875561979705,7.225583531217E-02));+#3054 = CARTESIAN_POINT('',(1.875890206046,0.144497066386));+#3055 = CARTESIAN_POINT('',(1.876436663572,0.216707118003));+#3056 = CARTESIAN_POINT('',(1.877200394714,0.288872140469));+#3057 = CARTESIAN_POINT('',(1.878180099773,0.360978787228));+#3058 = CARTESIAN_POINT('',(1.879374068697,0.43301396325));+#3059 = CARTESIAN_POINT('',(1.880780131169,0.504963170323));+#3060 = CARTESIAN_POINT('',(1.882395788345,0.576818913808));+#3061 = CARTESIAN_POINT('',(1.884217986984,0.648569991782));+#3062 = CARTESIAN_POINT('',(1.886243239016,0.720209200248));+#3063 = CARTESIAN_POINT('',(1.88846753729,0.791730911437));+#3064 = CARTESIAN_POINT('',(1.890886315173,0.863131185774));+#3065 = CARTESIAN_POINT('',(1.893494316397,0.934405643142));+#3066 = CARTESIAN_POINT('',(1.896285735317,1.00555496415));+#3067 = CARTESIAN_POINT('',(1.899254012595,1.076580587345));+#3068 = CARTESIAN_POINT('',(1.902391764688,1.147484909312));+#3069 = CARTESIAN_POINT('',(1.905690813966,1.218273609701));+#3070 = CARTESIAN_POINT('',(1.909142063054,1.288954331483));+#3071 = CARTESIAN_POINT('',(1.912735418738,1.359536487991));+#3072 = CARTESIAN_POINT('',(1.916459640695,1.430030887454));+#3073 = CARTESIAN_POINT('',(1.920302415254,1.500449379528));+#3074 = CARTESIAN_POINT('',(1.922933862242,1.547352965378));+#3075 = CARTESIAN_POINT('',(1.924264713372,1.570796326795));+#3076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3077 = ORIENTED_EDGE('',*,*,#2367,.F.);+#3078 = ORIENTED_EDGE('',*,*,#2338,.F.);+#3079 = ORIENTED_EDGE('',*,*,#2861,.T.);+#3080 = ADVANCED_FACE('',(#3081),#2406,.T.);+#3081 = FACE_BOUND('',#3082,.T.);+#3082 = EDGE_LOOP('',(#3083,#3084,#3106,#3107));+#3083 = ORIENTED_EDGE('',*,*,#2999,.T.);+#3084 = ORIENTED_EDGE('',*,*,#3085,.T.);+#3085 = EDGE_CURVE('',#2967,#2831,#3086,.T.);+#3086 = SURFACE_CURVE('',#3087,(#3092,#3099),.PCURVE_S1.);+#3087 = CIRCLE('',#3088,4.333333333333);+#3088 = AXIS2_PLACEMENT_3D('',#3089,#3090,#3091);+#3089 = CARTESIAN_POINT('',(0.,0.,10.5));+#3090 = DIRECTION('',(0.,0.,-1.));+#3091 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#3092 = PCURVE('',#2406,#3093);+#3093 = DEFINITIONAL_REPRESENTATION('',(#3094),#3098);+#3094 = LINE('',#3095,#3096);+#3095 = CARTESIAN_POINT('',(6.28318530718,1.570796326795));+#3096 = VECTOR('',#3097,1.);+#3097 = DIRECTION('',(-1.,0.));+#3098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3099 = PCURVE('',#2849,#3100);+#3100 = DEFINITIONAL_REPRESENTATION('',(#3101),#3105);+#3101 = CIRCLE('',#3102,4.333333333333);+#3102 = AXIS2_PLACEMENT_2D('',#3103,#3104);+#3103 = CARTESIAN_POINT('',(0.,0.));+#3104 = DIRECTION('',(1.,0.));+#3105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3106 = ORIENTED_EDGE('',*,*,#2941,.F.);+#3107 = ORIENTED_EDGE('',*,*,#2391,.F.);+#3108 = ADVANCED_FACE('',(#3109),#2484,.F.);+#3109 = FACE_BOUND('',#3110,.F.);+#3110 = EDGE_LOOP('',(#3111,#3112,#3113,#3114));+#3111 = ORIENTED_EDGE('',*,*,#2779,.T.);+#3112 = ORIENTED_EDGE('',*,*,#2470,.T.);+#3113 = ORIENTED_EDGE('',*,*,#2499,.T.);+#3114 = ORIENTED_EDGE('',*,*,#2575,.T.);+#3115 = ADVANCED_FACE('',(#3116),#2661,.F.);+#3116 = FACE_BOUND('',#3117,.F.);+#3117 = EDGE_LOOP('',(#3118,#3119,#3120,#3121));+#3118 = ORIENTED_EDGE('',*,*,#2806,.T.);+#3119 = ORIENTED_EDGE('',*,*,#2647,.T.);+#3120 = ORIENTED_EDGE('',*,*,#2676,.T.);+#3121 = ORIENTED_EDGE('',*,*,#2752,.T.);+#3122 = ADVANCED_FACE('',(#3123),#2849,.F.);+#3123 = FACE_BOUND('',#3124,.F.);+#3124 = EDGE_LOOP('',(#3125,#3126,#3127));+#3125 = ORIENTED_EDGE('',*,*,#3085,.T.);+#3126 = ORIENTED_EDGE('',*,*,#2830,.T.);+#3127 = ORIENTED_EDGE('',*,*,#3128,.T.);+#3128 = EDGE_CURVE('',#2833,#2967,#3129,.T.);+#3129 = SURFACE_CURVE('',#3130,(#3134,#3141),.PCURVE_S1.);+#3130 = LINE('',#3131,#3132);+#3131 = CARTESIAN_POINT('',(1.5,5.,10.5));+#3132 = VECTOR('',#3133,1.);+#3133 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#3134 = PCURVE('',#2849,#3135);+#3135 = DEFINITIONAL_REPRESENTATION('',(#3136),#3140);+#3136 = LINE('',#3137,#3138);+#3137 = CARTESIAN_POINT('',(-1.5,5.));+#3138 = VECTOR('',#3139,1.);+#3139 = DIRECTION('',(0.,-1.));+#3140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3141 = PCURVE('',#2983,#3142);+#3142 = DEFINITIONAL_REPRESENTATION('',(#3143),#3147);+#3143 = LINE('',#3144,#3145);+#3144 = CARTESIAN_POINT('',(3.5,4.286263797014E-16));+#3145 = VECTOR('',#3146,1.);+#3146 = DIRECTION('',(0.,1.));+#3147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3148 = ADVANCED_FACE('',(#3149),#2983,.T.);+#3149 = FACE_BOUND('',#3150,.T.);+#3150 = EDGE_LOOP('',(#3151,#3152));+#3151 = ORIENTED_EDGE('',*,*,#2966,.F.);+#3152 = ORIENTED_EDGE('',*,*,#3128,.T.);+#3153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#3157)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#3154,#3155,#3156)) REPRESENTATION_CONTEXT+('Context #1','3D Context with UNIT and UNCERTAINTY') );+#3154 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#3155 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#3156 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#3157 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#3154,+  'distance_accuracy_value','confusion accuracy');+#3158 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3159,#3161);+#3159 = ( REPRESENTATION_RELATIONSHIP('','',#36,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3160) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#3160 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15);+#3161 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+  #3162);+#3162 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','=>[0:1:1:2]','',#5,#31,$);+#3163 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#33));+#3164 = SHAPE_DEFINITION_REPRESENTATION(#3165,#3171);+#3165 = PRODUCT_DEFINITION_SHAPE('','',#3166);+#3166 = PRODUCT_DEFINITION('design','',#3167,#3170);+#3167 = PRODUCT_DEFINITION_FORMATION('','',#3168);+#3168 = PRODUCT('Adom.LaserEtch','Adom.LaserEtch','',(#3169));+#3169 = PRODUCT_CONTEXT('',#2,'mechanical');+#3170 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#3171 = SHAPE_REPRESENTATION('',(#11,#3172,#3552,#3674,#3812,#3998,#4232+    ,#4418,#4556,#4824,#5010,#5228,#5414,#5552,#5820,#6006,#6144),#6412+  );+#3172 = SHELL_BASED_SURFACE_MODEL('',(#3173));+#3173 = OPEN_SHELL('',(#3174));+#3174 = ADVANCED_FACE('',(#3175,#3438),#3189,.T.);+#3175 = FACE_BOUND('',#3176,.F.);+#3176 = EDGE_LOOP('',(#3177,#3200,#3216,#3232,#3248,#3264,#3280,#3296,+    #3312,#3328,#3344,#3360,#3376,#3392,#3408,#3424));+#3177 = ORIENTED_EDGE('',*,*,#3178,.T.);+#3178 = EDGE_CURVE('',#3179,#3181,#3183,.T.);+#3179 = VERTEX_POINT('',#3180);+#3180 = CARTESIAN_POINT('',(-1.397528899652,-3.408176409765,10.505));+#3181 = VERTEX_POINT('',#3182);+#3182 = CARTESIAN_POINT('',(-1.377918595179,-3.372027294292,10.505));+#3183 = SURFACE_CURVE('',#3184,(#3188),.PCURVE_S1.);+#3184 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3185,#3186,#3187),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3185 = CARTESIAN_POINT('',(-1.397528899652,-3.408176409765,10.505));+#3186 = CARTESIAN_POINT('',(-1.393276062537,-3.38738476165,10.505));+#3187 = CARTESIAN_POINT('',(-1.377918595179,-3.372027294292,10.505));+#3188 = PCURVE('',#3189,#3194);+#3189 = PLANE('',#3190);+#3190 = AXIS2_PLACEMENT_3D('',#3191,#3192,#3193);+#3191 = CARTESIAN_POINT('',(-1.064389992354,-3.789514137693,10.505));+#3192 = DIRECTION('',(0.,0.,1.));+#3193 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#3194 = DEFINITIONAL_REPRESENTATION('',(#3195),#3199);+#3195 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3196,#3197,#3198),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3196 = CARTESIAN_POINT('',(0.381337727928,0.333138907298));+#3197 = CARTESIAN_POINT('',(0.402129376043,0.328886070183));+#3198 = CARTESIAN_POINT('',(0.417486843401,0.313528602825));+#3199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3200 = ORIENTED_EDGE('',*,*,#3201,.T.);+#3201 = EDGE_CURVE('',#3181,#3202,#3204,.T.);+#3202 = VERTEX_POINT('',#3203);+#3203 = CARTESIAN_POINT('',(-1.318142606849,-3.334460566448,10.505));+#3204 = SURFACE_CURVE('',#3205,(#3209),.PCURVE_S1.);+#3205 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3206,#3207,#3208),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3206 = CARTESIAN_POINT('',(-1.377918595179,-3.372027294292,10.505));+#3207 = CARTESIAN_POINT('',(-1.362561127822,-3.356669826935,10.505));+#3208 = CARTESIAN_POINT('',(-1.318142606849,-3.334460566448,10.505));+#3209 = PCURVE('',#3189,#3210);+#3210 = DEFINITIONAL_REPRESENTATION('',(#3211),#3215);+#3211 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3212,#3213,#3214),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3212 = CARTESIAN_POINT('',(0.417486843401,0.313528602825));+#3213 = CARTESIAN_POINT('',(0.432844310758,0.298171135468));+#3214 = CARTESIAN_POINT('',(0.455053571245,0.253752614495));+#3215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3216 = ORIENTED_EDGE('',*,*,#3217,.T.);+#3217 = EDGE_CURVE('',#3202,#3218,#3220,.T.);+#3218 = VERTEX_POINT('',#3219);+#3219 = CARTESIAN_POINT('',(-1.064389992354,-3.206875453015,10.505));+#3220 = SURFACE_CURVE('',#3221,(#3225),.PCURVE_S1.);+#3221 = LINE('',#3222,#3223);+#3222 = CARTESIAN_POINT('',(-1.318142606849,-3.334460566448,10.505));+#3223 = VECTOR('',#3224,1.);+#3224 = DIRECTION('',(0.893426720638,0.449208965684,0.));+#3225 = PCURVE('',#3189,#3226);+#3226 = DEFINITIONAL_REPRESENTATION('',(#3227),#3231);+#3227 = LINE('',#3228,#3229);+#3228 = CARTESIAN_POINT('',(0.455053571245,0.253752614495));+#3229 = VECTOR('',#3230,1.);+#3230 = DIRECTION('',(0.449208965684,-0.893426720638));+#3231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3232 = ORIENTED_EDGE('',*,*,#3233,.T.);+#3233 = EDGE_CURVE('',#3218,#3234,#3236,.T.);+#3234 = VERTEX_POINT('',#3235);+#3235 = CARTESIAN_POINT('',(-1.064389992354,-3.359977589135,10.505));+#3236 = SURFACE_CURVE('',#3237,(#3241),.PCURVE_S1.);+#3237 = LINE('',#3238,#3239);+#3238 = CARTESIAN_POINT('',(-1.064389992354,-3.206875453015,10.505));+#3239 = VECTOR('',#3240,1.);+#3240 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#3241 = PCURVE('',#3189,#3242);+#3242 = DEFINITIONAL_REPRESENTATION('',(#3243),#3247);+#3243 = LINE('',#3244,#3245);+#3244 = CARTESIAN_POINT('',(0.582638684678,6.468588827667E-17));+#3245 = VECTOR('',#3246,1.);+#3246 = DIRECTION('',(-1.,0.));+#3247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3248 = ORIENTED_EDGE('',*,*,#3249,.T.);+#3249 = EDGE_CURVE('',#3234,#3250,#3252,.T.);+#3250 = VERTEX_POINT('',#3251);+#3251 = CARTESIAN_POINT('',(-1.242536613703,-3.445034331423,10.505));+#3252 = SURFACE_CURVE('',#3253,(#3257),.PCURVE_S1.);+#3253 = LINE('',#3254,#3255);+#3254 = CARTESIAN_POINT('',(-1.064389992354,-3.359977589135,10.505));+#3255 = VECTOR('',#3256,1.);+#3256 = DIRECTION('',(-0.902417585892,-0.430862507853,0.));+#3257 = PCURVE('',#3189,#3258);+#3258 = DEFINITIONAL_REPRESENTATION('',(#3259),#3263);+#3259 = LINE('',#3260,#3261);+#3260 = CARTESIAN_POINT('',(0.429536548558,4.76881366127E-17));+#3261 = VECTOR('',#3262,1.);+#3262 = DIRECTION('',(-0.430862507853,0.902417585892));+#3263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3264 = ORIENTED_EDGE('',*,*,#3265,.T.);+#3265 = EDGE_CURVE('',#3250,#3266,#3268,.T.);+#3266 = VERTEX_POINT('',#3267);+#3267 = CARTESIAN_POINT('',(-1.263328261818,-3.454957618024,10.505));+#3268 = SURFACE_CURVE('',#3269,(#3273),.PCURVE_S1.);+#3269 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3270,#3271,#3272),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3270 = CARTESIAN_POINT('',(-1.242536613703,-3.445034331423,10.505));+#3271 = CARTESIAN_POINT('',(-1.250097213018,-3.448814631081,10.505));+#3272 = CARTESIAN_POINT('',(-1.263328261818,-3.454957618024,10.505));+#3273 = PCURVE('',#3189,#3274);+#3274 = DEFINITIONAL_REPRESENTATION('',(#3275),#3279);+#3275 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3276,#3277,#3278),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3276 = CARTESIAN_POINT('',(0.34447980627,0.178146621349));+#3277 = CARTESIAN_POINT('',(0.340699506612,0.185707220664));+#3278 = CARTESIAN_POINT('',(0.334556519669,0.198938269464));+#3279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3280 = ORIENTED_EDGE('',*,*,#3281,.T.);+#3281 = EDGE_CURVE('',#3266,#3282,#3284,.T.);+#3282 = VERTEX_POINT('',#3283);+#3283 = CARTESIAN_POINT('',(-1.343187092078,-3.542849585056,10.505));+#3284 = SURFACE_CURVE('',#3285,(#3289),.PCURVE_S1.);+#3285 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3286,#3287,#3288),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3286 = CARTESIAN_POINT('',(-1.263328261818,-3.454957618024,10.505));+#3287 = CARTESIAN_POINT('',(-1.343187092078,-3.492288077139,10.505));+#3288 = CARTESIAN_POINT('',(-1.343187092078,-3.542849585056,10.505));+#3289 = PCURVE('',#3189,#3290);+#3290 = DEFINITIONAL_REPRESENTATION('',(#3291),#3295);+#3291 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3292,#3293,#3294),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3292 = CARTESIAN_POINT('',(0.334556519669,0.198938269464));+#3293 = CARTESIAN_POINT('',(0.297226060554,0.278797099724));+#3294 = CARTESIAN_POINT('',(0.246664552637,0.278797099724));+#3295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3296 = ORIENTED_EDGE('',*,*,#3297,.T.);+#3297 = EDGE_CURVE('',#3282,#3298,#3300,.T.);+#3298 = VERTEX_POINT('',#3299);+#3299 = CARTESIAN_POINT('',(-1.343187092078,-3.587268106029,10.505));+#3300 = SURFACE_CURVE('',#3301,(#3305),.PCURVE_S1.);+#3301 = LINE('',#3302,#3303);+#3302 = CARTESIAN_POINT('',(-1.343187092078,-3.542849585056,10.505));+#3303 = VECTOR('',#3304,1.);+#3304 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#3305 = PCURVE('',#3189,#3306);+#3306 = DEFINITIONAL_REPRESENTATION('',(#3307),#3311);+#3307 = LINE('',#3308,#3309);+#3308 = CARTESIAN_POINT('',(0.246664552637,0.278797099724));+#3309 = VECTOR('',#3310,1.);+#3310 = DIRECTION('',(-1.,0.));+#3311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3312 = ORIENTED_EDGE('',*,*,#3313,.T.);+#3313 = EDGE_CURVE('',#3298,#3314,#3316,.T.);+#3314 = VERTEX_POINT('',#3315);+#3315 = CARTESIAN_POINT('',(-1.064389992354,-3.587268106029,10.505));+#3316 = SURFACE_CURVE('',#3317,(#3321),.PCURVE_S1.);+#3317 = LINE('',#3318,#3319);+#3318 = CARTESIAN_POINT('',(-1.343187092078,-3.587268106029,10.505));+#3319 = VECTOR('',#3320,1.);+#3320 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#3321 = PCURVE('',#3189,#3322);+#3322 = DEFINITIONAL_REPRESENTATION('',(#3323),#3327);+#3323 = LINE('',#3324,#3325);+#3324 = CARTESIAN_POINT('',(0.202246031664,0.278797099724));+#3325 = VECTOR('',#3326,1.);+#3326 = DIRECTION('',(0.,-1.));+#3327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3328 = ORIENTED_EDGE('',*,*,#3329,.T.);+#3329 = EDGE_CURVE('',#3314,#3330,#3332,.T.);+#3330 = VERTEX_POINT('',#3331);+#3331 = CARTESIAN_POINT('',(-1.064389992354,-3.726666655891,10.505));+#3332 = SURFACE_CURVE('',#3333,(#3337),.PCURVE_S1.);+#3333 = LINE('',#3334,#3335);+#3334 = CARTESIAN_POINT('',(-1.064389992354,-3.587268106029,10.505));+#3335 = VECTOR('',#3336,1.);+#3336 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#3337 = PCURVE('',#3189,#3338);+#3338 = DEFINITIONAL_REPRESENTATION('',(#3339),#3343);+#3339 = LINE('',#3340,#3341);+#3340 = CARTESIAN_POINT('',(0.202246031664,2.245382009924E-17));+#3341 = VECTOR('',#3342,1.);+#3342 = DIRECTION('',(-1.,0.));+#3343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3344 = ORIENTED_EDGE('',*,*,#3345,.T.);+#3345 = EDGE_CURVE('',#3330,#3346,#3348,.T.);+#3346 = VERTEX_POINT('',#3347);+#3347 = CARTESIAN_POINT('',(-1.769888415893,-3.726666655891,10.505));+#3348 = SURFACE_CURVE('',#3349,(#3353),.PCURVE_S1.);+#3349 = LINE('',#3350,#3351);+#3350 = CARTESIAN_POINT('',(-1.064389992354,-3.726666655891,10.505));+#3351 = VECTOR('',#3352,1.);+#3352 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#3353 = PCURVE('',#3189,#3354);+#3354 = DEFINITIONAL_REPRESENTATION('',(#3355),#3359);+#3355 = LINE('',#3356,#3357);+#3356 = CARTESIAN_POINT('',(6.2847481802E-02,6.977472133628E-18));+#3357 = VECTOR('',#3358,1.);+#3358 = DIRECTION('',(0.,1.));+#3359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3360 = ORIENTED_EDGE('',*,*,#3361,.T.);+#3361 = EDGE_CURVE('',#3346,#3362,#3364,.T.);+#3362 = VERTEX_POINT('',#3363);+#3363 = CARTESIAN_POINT('',(-1.769888415893,-3.525365699141,10.505));+#3364 = SURFACE_CURVE('',#3365,(#3369),.PCURVE_S1.);+#3365 = LINE('',#3366,#3367);+#3366 = CARTESIAN_POINT('',(-1.769888415893,-3.726666655891,10.505));+#3367 = VECTOR('',#3368,1.);+#3368 = DIRECTION('',(1.110223024625E-16,1.,0.));+#3369 = PCURVE('',#3189,#3370);+#3370 = DEFINITIONAL_REPRESENTATION('',(#3371),#3375);+#3371 = LINE('',#3372,#3373);+#3372 = CARTESIAN_POINT('',(6.2847481802E-02,0.705498423539));+#3373 = VECTOR('',#3374,1.);+#3374 = DIRECTION('',(1.,0.));+#3375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3376 = ORIENTED_EDGE('',*,*,#3377,.T.);+#3377 = EDGE_CURVE('',#3362,#3378,#3380,.T.);+#3378 = VERTEX_POINT('',#3379);+#3379 = CARTESIAN_POINT('',(-1.721689595263,-3.329971460605,10.505));+#3380 = SURFACE_CURVE('',#3381,(#3385),.PCURVE_S1.);+#3381 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3382,#3383,#3384),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3382 = CARTESIAN_POINT('',(-1.769888415893,-3.525365699141,10.505));+#3383 = CARTESIAN_POINT('',(-1.769888415893,-3.389274911479,10.505));+#3384 = CARTESIAN_POINT('',(-1.721689595263,-3.329971460605,10.505));+#3385 = PCURVE('',#3189,#3386);+#3386 = DEFINITIONAL_REPRESENTATION('',(#3387),#3391);+#3387 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3388,#3389,#3390),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3388 = CARTESIAN_POINT('',(0.264148438552,0.705498423539));+#3389 = CARTESIAN_POINT('',(0.400239226214,0.705498423539));+#3390 = CARTESIAN_POINT('',(0.459542677088,0.657299602909));+#3391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3392 = ORIENTED_EDGE('',*,*,#3393,.T.);+#3393 = EDGE_CURVE('',#3378,#3394,#3396,.T.);+#3394 = VERTEX_POINT('',#3395);+#3395 = CARTESIAN_POINT('',(-1.564807159486,-3.270668009732,10.505));+#3396 = SURFACE_CURVE('',#3397,(#3401),.PCURVE_S1.);+#3397 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3398,#3399,#3400),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3398 = CARTESIAN_POINT('',(-1.721689595263,-3.329971460605,10.505));+#3399 = CARTESIAN_POINT('',(-1.673490774633,-3.270668009732,10.505));+#3400 = CARTESIAN_POINT('',(-1.564807159486,-3.270668009732,10.505));+#3401 = PCURVE('',#3189,#3402);+#3402 = DEFINITIONAL_REPRESENTATION('',(#3403),#3407);+#3403 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3404,#3405,#3406),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3404 = CARTESIAN_POINT('',(0.459542677088,0.657299602909));+#3405 = CARTESIAN_POINT('',(0.518846127961,0.609100782279));+#3406 = CARTESIAN_POINT('',(0.518846127961,0.500417167132));+#3407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3408 = ORIENTED_EDGE('',*,*,#3409,.T.);+#3409 = EDGE_CURVE('',#3394,#3410,#3412,.T.);+#3410 = VERTEX_POINT('',#3411);+#3411 = CARTESIAN_POINT('',(-1.449035482482,-3.306108319018,10.505));+#3412 = SURFACE_CURVE('',#3413,(#3417),.PCURVE_S1.);+#3413 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3414,#3415,#3416),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3414 = CARTESIAN_POINT('',(-1.564807159486,-3.270668009732,10.505));+#3415 = CARTESIAN_POINT('',(-1.492036391083,-3.270668009732,10.505));+#3416 = CARTESIAN_POINT('',(-1.449035482482,-3.306108319018,10.505));+#3417 = PCURVE('',#3189,#3418);+#3418 = DEFINITIONAL_REPRESENTATION('',(#3419),#3423);+#3419 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3420,#3421,#3422),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3420 = CARTESIAN_POINT('',(0.518846127961,0.500417167132));+#3421 = CARTESIAN_POINT('',(0.518846127961,0.427646398729));+#3422 = CARTESIAN_POINT('',(0.483405818675,0.384645490128));+#3423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3424 = ORIENTED_EDGE('',*,*,#3425,.T.);+#3425 = EDGE_CURVE('',#3410,#3179,#3426,.T.);+#3426 = SURFACE_CURVE('',#3427,(#3431),.PCURVE_S1.);+#3427 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3428,#3429,#3430),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3428 = CARTESIAN_POINT('',(-1.449035482482,-3.306108319018,10.505));+#3429 = CARTESIAN_POINT('',(-1.40603457388,-3.341548628305,10.505));+#3430 = CARTESIAN_POINT('',(-1.397528899652,-3.408176409765,10.505));+#3431 = PCURVE('',#3189,#3432);+#3432 = DEFINITIONAL_REPRESENTATION('',(#3433),#3437);+#3433 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3434,#3435,#3436),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3434 = CARTESIAN_POINT('',(0.483405818675,0.384645490128));+#3435 = CARTESIAN_POINT('',(0.447965509388,0.341644581526));+#3436 = CARTESIAN_POINT('',(0.381337727928,0.333138907298));+#3437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3438 = FACE_BOUND('',#3439,.F.);+#3439 = EDGE_LOOP('',(#3440,#3458,#3474,#3490,#3506,#3522,#3538));+#3440 = ORIENTED_EDGE('',*,*,#3441,.T.);+#3441 = EDGE_CURVE('',#3442,#3444,#3446,.T.);+#3442 = VERTEX_POINT('',#3443);+#3443 = CARTESIAN_POINT('',(-1.652699126518,-3.521585399483,10.505));+#3444 = VERTEX_POINT('',#3445);+#3445 = CARTESIAN_POINT('',(-1.652699126518,-3.587268106029,10.505));+#3446 = SURFACE_CURVE('',#3447,(#3451),.PCURVE_S1.);+#3447 = LINE('',#3448,#3449);+#3448 = CARTESIAN_POINT('',(-1.652699126518,-3.521585399483,10.505));+#3449 = VECTOR('',#3450,1.);+#3450 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#3451 = PCURVE('',#3189,#3452);+#3452 = DEFINITIONAL_REPRESENTATION('',(#3453),#3457);+#3453 = LINE('',#3454,#3455);+#3454 = CARTESIAN_POINT('',(0.26792873821,0.588309134164));+#3455 = VECTOR('',#3456,1.);+#3456 = DIRECTION('',(-1.,0.));+#3457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3458 = ORIENTED_EDGE('',*,*,#3459,.T.);+#3459 = EDGE_CURVE('',#3444,#3460,#3462,.T.);+#3460 = VERTEX_POINT('',#3461);+#3461 = CARTESIAN_POINT('',(-1.460376381454,-3.587268106029,10.505));+#3462 = SURFACE_CURVE('',#3463,(#3467),.PCURVE_S1.);+#3463 = LINE('',#3464,#3465);+#3464 = CARTESIAN_POINT('',(-1.652699126518,-3.587268106029,10.505));+#3465 = VECTOR('',#3466,1.);+#3466 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#3467 = PCURVE('',#3189,#3468);+#3468 = DEFINITIONAL_REPRESENTATION('',(#3469),#3473);+#3469 = LINE('',#3470,#3471);+#3470 = CARTESIAN_POINT('',(0.202246031664,0.588309134164));+#3471 = VECTOR('',#3472,1.);+#3472 = DIRECTION('',(0.,-1.));+#3473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3474 = ORIENTED_EDGE('',*,*,#3475,.T.);+#3475 = EDGE_CURVE('',#3460,#3476,#3478,.T.);+#3476 = VERTEX_POINT('',#3477);+#3477 = CARTESIAN_POINT('',(-1.460376381454,-3.521585399483,10.505));+#3478 = SURFACE_CURVE('',#3479,(#3483),.PCURVE_S1.);+#3479 = LINE('',#3480,#3481);+#3480 = CARTESIAN_POINT('',(-1.460376381454,-3.587268106029,10.505));+#3481 = VECTOR('',#3482,1.);+#3482 = DIRECTION('',(1.110223024625E-16,1.,0.));+#3483 = PCURVE('',#3189,#3484);+#3484 = DEFINITIONAL_REPRESENTATION('',(#3485),#3489);+#3485 = LINE('',#3486,#3487);+#3486 = CARTESIAN_POINT('',(0.202246031664,0.3959863891));+#3487 = VECTOR('',#3488,1.);+#3488 = DIRECTION('',(1.,0.));+#3489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3490 = ORIENTED_EDGE('',*,*,#3491,.T.);+#3491 = EDGE_CURVE('',#3476,#3492,#3494,.T.);+#3492 = VERTEX_POINT('',#3493);+#3493 = CARTESIAN_POINT('',(-1.482821910669,-3.439600150666,10.505));+#3494 = SURFACE_CURVE('',#3495,(#3499),.PCURVE_S1.);+#3495 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3496,#3497,#3498),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3496 = CARTESIAN_POINT('',(-1.460376381454,-3.521585399483,10.505));+#3497 = CARTESIAN_POINT('',(-1.460376381454,-3.464408367167,10.505));+#3498 = CARTESIAN_POINT('',(-1.482821910669,-3.439600150666,10.505));+#3499 = PCURVE('',#3189,#3500);+#3500 = DEFINITIONAL_REPRESENTATION('',(#3501),#3505);+#3501 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3502,#3503,#3504),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3502 = CARTESIAN_POINT('',(0.26792873821,0.3959863891));+#3503 = CARTESIAN_POINT('',(0.325105770526,0.3959863891));+#3504 = CARTESIAN_POINT('',(0.349913987027,0.418431918315));+#3505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3506 = ORIENTED_EDGE('',*,*,#3507,.T.);+#3507 = EDGE_CURVE('',#3492,#3508,#3510,.T.);+#3508 = VERTEX_POINT('',#3509);+#3509 = CARTESIAN_POINT('',(-1.556774022714,-3.414791934165,10.505));+#3510 = SURFACE_CURVE('',#3511,(#3515),.PCURVE_S1.);+#3511 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3512,#3513,#3514),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3512 = CARTESIAN_POINT('',(-1.482821910669,-3.439600150666,10.505));+#3513 = CARTESIAN_POINT('',(-1.505267439884,-3.414791934165,10.505));+#3514 = CARTESIAN_POINT('',(-1.556774022714,-3.414791934165,10.505));+#3515 = PCURVE('',#3189,#3516);+#3516 = DEFINITIONAL_REPRESENTATION('',(#3517),#3521);+#3517 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3518,#3519,#3520),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3518 = CARTESIAN_POINT('',(0.349913987027,0.418431918315));+#3519 = CARTESIAN_POINT('',(0.374722203528,0.44087744753));+#3520 = CARTESIAN_POINT('',(0.374722203528,0.49238403036));+#3521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3522 = ORIENTED_EDGE('',*,*,#3523,.T.);+#3523 = EDGE_CURVE('',#3508,#3524,#3526,.T.);+#3524 = VERTEX_POINT('',#3525);+#3525 = CARTESIAN_POINT('',(-1.630489866031,-3.439363881938,10.505));+#3526 = SURFACE_CURVE('',#3527,(#3531),.PCURVE_S1.);+#3527 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3528,#3529,#3530),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3528 = CARTESIAN_POINT('',(-1.556774022714,-3.414791934165,10.505));+#3529 = CARTESIAN_POINT('',(-1.608280605545,-3.414791934165,10.505));+#3530 = CARTESIAN_POINT('',(-1.630489866031,-3.439363881938,10.505));+#3531 = PCURVE('',#3189,#3532);+#3532 = DEFINITIONAL_REPRESENTATION('',(#3533),#3537);+#3533 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3534,#3535,#3536),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3534 = CARTESIAN_POINT('',(0.374722203528,0.49238403036));+#3535 = CARTESIAN_POINT('',(0.374722203528,0.543890613191));+#3536 = CARTESIAN_POINT('',(0.350150255755,0.566099873677));+#3537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3538 = ORIENTED_EDGE('',*,*,#3539,.T.);+#3539 = EDGE_CURVE('',#3524,#3442,#3540,.T.);+#3540 = SURFACE_CURVE('',#3541,(#3545),.PCURVE_S1.);+#3541 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3542,#3543,#3544),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3542 = CARTESIAN_POINT('',(-1.630489866031,-3.439363881938,10.505));+#3543 = CARTESIAN_POINT('',(-1.652699126518,-3.46393582971,10.505));+#3544 = CARTESIAN_POINT('',(-1.652699126518,-3.521585399483,10.505));+#3545 = PCURVE('',#3189,#3546);+#3546 = DEFINITIONAL_REPRESENTATION('',(#3547),#3551);+#3547 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3548,#3549,#3550),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3548 = CARTESIAN_POINT('',(0.350150255755,0.566099873677));+#3549 = CARTESIAN_POINT('',(0.325578307983,0.588309134164));+#3550 = CARTESIAN_POINT('',(0.26792873821,0.588309134164));+#3551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3552 = SHELL_BASED_SURFACE_MODEL('',(#3553));+#3553 = OPEN_SHELL('',(#3554));+#3554 = ADVANCED_FACE('',(#3555),#3569,.T.);+#3555 = FACE_BOUND('',#3556,.F.);+#3556 = EDGE_LOOP('',(#3557,#3580,#3596,#3612,#3628,#3644,#3660));+#3557 = ORIENTED_EDGE('',*,*,#3558,.T.);+#3558 = EDGE_CURVE('',#3559,#3561,#3563,.T.);+#3559 = VERTEX_POINT('',#3560);+#3560 = CARTESIAN_POINT('',(-1.769888415893,-3.03959719318,10.505));+#3561 = VERTEX_POINT('',#3562);+#3562 = CARTESIAN_POINT('',(-1.180634206815,-2.915792379405,10.505));+#3563 = SURFACE_CURVE('',#3564,(#3568),.PCURVE_S1.);+#3564 = LINE('',#3565,#3566);+#3565 = CARTESIAN_POINT('',(-1.769888415893,-3.03959719318,10.505));+#3566 = VECTOR('',#3567,1.);+#3567 = DIRECTION('',(0.978632971885,0.205614946779,0.));+#3568 = PCURVE('',#3569,#3574);+#3569 = PLANE('',#3570);+#3570 = AXIS2_PLACEMENT_3D('',#3571,#3572,#3573);+#3571 = CARTESIAN_POINT('',(-1.064389992354,-3.206875453015,10.505));+#3572 = DIRECTION('',(0.,0.,1.));+#3573 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#3574 = DEFINITIONAL_REPRESENTATION('',(#3575),#3579);+#3575 = LINE('',#3576,#3577);+#3576 = CARTESIAN_POINT('',(0.167278259835,0.705498423539));+#3577 = VECTOR('',#3578,1.);+#3578 = DIRECTION('',(0.205614946779,-0.978632971885));+#3579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3580 = ORIENTED_EDGE('',*,*,#3581,.T.);+#3581 = EDGE_CURVE('',#3561,#3582,#3584,.T.);+#3582 = VERTEX_POINT('',#3583);+#3583 = CARTESIAN_POINT('',(-1.769888415893,-2.791515028171,10.505));+#3584 = SURFACE_CURVE('',#3585,(#3589),.PCURVE_S1.);+#3585 = LINE('',#3586,#3587);+#3586 = CARTESIAN_POINT('',(-1.180634206815,-2.915792379405,10.505));+#3587 = VECTOR('',#3588,1.);+#3588 = DIRECTION('',(-0.978474792229,0.206366375586,0.));+#3589 = PCURVE('',#3569,#3590);+#3590 = DEFINITIONAL_REPRESENTATION('',(#3591),#3595);+#3591 = LINE('',#3592,#3593);+#3592 = CARTESIAN_POINT('',(0.29108307361,0.116244214461));+#3593 = VECTOR('',#3594,1.);+#3594 = DIRECTION('',(0.206366375586,0.978474792229));+#3595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3596 = ORIENTED_EDGE('',*,*,#3597,.T.);+#3597 = EDGE_CURVE('',#3582,#3598,#3600,.T.);+#3598 = VERTEX_POINT('',#3599);+#3599 = CARTESIAN_POINT('',(-1.769888415893,-2.651171403395,10.505));+#3600 = SURFACE_CURVE('',#3601,(#3605),.PCURVE_S1.);+#3601 = LINE('',#3602,#3603);+#3602 = CARTESIAN_POINT('',(-1.769888415893,-2.791515028171,10.505));+#3603 = VECTOR('',#3604,1.);+#3604 = DIRECTION('',(1.110223024625E-16,1.,0.));+#3605 = PCURVE('',#3569,#3606);+#3606 = DEFINITIONAL_REPRESENTATION('',(#3607),#3611);+#3607 = LINE('',#3608,#3609);+#3608 = CARTESIAN_POINT('',(0.415360424844,0.705498423539));+#3609 = VECTOR('',#3610,1.);+#3610 = DIRECTION('',(1.,0.));+#3611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3612 = ORIENTED_EDGE('',*,*,#3613,.T.);+#3613 = EDGE_CURVE('',#3598,#3614,#3616,.T.);+#3614 = VERTEX_POINT('',#3615);+#3615 = CARTESIAN_POINT('',(-1.064389992354,-2.818922200687,10.505));+#3616 = SURFACE_CURVE('',#3617,(#3621),.PCURVE_S1.);+#3617 = LINE('',#3618,#3619);+#3618 = CARTESIAN_POINT('',(-1.769888415893,-2.651171403395,10.505));+#3619 = VECTOR('',#3620,1.);+#3620 = DIRECTION('',(0.972876087208,-0.231326866014,0.));+#3621 = PCURVE('',#3569,#3622);+#3622 = DEFINITIONAL_REPRESENTATION('',(#3623),#3627);+#3623 = LINE('',#3624,#3625);+#3624 = CARTESIAN_POINT('',(0.55570404962,0.705498423539));+#3625 = VECTOR('',#3626,1.);+#3626 = DIRECTION('',(-0.231326866014,-0.972876087208));+#3627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3628 = ORIENTED_EDGE('',*,*,#3629,.T.);+#3629 = EDGE_CURVE('',#3614,#3630,#3632,.T.);+#3630 = VERTEX_POINT('',#3631);+#3631 = CARTESIAN_POINT('',(-1.064389992354,-3.012190020665,10.505));+#3632 = SURFACE_CURVE('',#3633,(#3637),.PCURVE_S1.);+#3633 = LINE('',#3634,#3635);+#3634 = CARTESIAN_POINT('',(-1.064389992354,-2.818922200687,10.505));+#3635 = VECTOR('',#3636,1.);+#3636 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#3637 = PCURVE('',#3569,#3638);+#3638 = DEFINITIONAL_REPRESENTATION('',(#3639),#3643);+#3639 = LINE('',#3640,#3641);+#3640 = CARTESIAN_POINT('',(0.387953252328,4.307146332127E-17));+#3641 = VECTOR('',#3642,1.);+#3642 = DIRECTION('',(-1.,0.));+#3643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3644 = ORIENTED_EDGE('',*,*,#3645,.T.);+#3645 = EDGE_CURVE('',#3630,#3646,#3648,.T.);+#3646 = VERTEX_POINT('',#3647);+#3647 = CARTESIAN_POINT('',(-1.769888415893,-3.179940817957,10.505));+#3648 = SURFACE_CURVE('',#3649,(#3653),.PCURVE_S1.);+#3649 = LINE('',#3650,#3651);+#3650 = CARTESIAN_POINT('',(-1.064389992354,-3.012190020665,10.505));+#3651 = VECTOR('',#3652,1.);+#3652 = DIRECTION('',(-0.972876087208,-0.231326866014,0.));+#3653 = PCURVE('',#3569,#3654);+#3654 = DEFINITIONAL_REPRESENTATION('',(#3655),#3659);+#3655 = LINE('',#3656,#3657);+#3656 = CARTESIAN_POINT('',(0.19468543235,2.16144249554E-17));+#3657 = VECTOR('',#3658,1.);+#3658 = DIRECTION('',(-0.231326866014,0.972876087208));+#3659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3660 = ORIENTED_EDGE('',*,*,#3661,.T.);+#3661 = EDGE_CURVE('',#3646,#3559,#3662,.T.);+#3662 = SURFACE_CURVE('',#3663,(#3667),.PCURVE_S1.);+#3663 = LINE('',#3664,#3665);+#3664 = CARTESIAN_POINT('',(-1.769888415893,-3.179940817957,10.505));+#3665 = VECTOR('',#3666,1.);+#3666 = DIRECTION('',(1.110223024625E-16,1.,0.));+#3667 = PCURVE('',#3569,#3668);+#3668 = DEFINITIONAL_REPRESENTATION('',(#3669),#3673);+#3669 = LINE('',#3670,#3671);+#3670 = CARTESIAN_POINT('',(2.6934635058E-02,0.705498423539));+#3671 = VECTOR('',#3672,1.);+#3672 = DIRECTION('',(1.,0.));+#3673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3674 = SHELL_BASED_SURFACE_MODEL('',(#3675));+#3675 = OPEN_SHELL('',(#3676));+#3676 = ADVANCED_FACE('',(#3677),#3691,.T.);+#3677 = FACE_BOUND('',#3678,.F.);+#3678 = EDGE_LOOP('',(#3679,#3702,#3718,#3734,#3750,#3766,#3782,#3798));+#3679 = ORIENTED_EDGE('',*,*,#3680,.T.);+#3680 = EDGE_CURVE('',#3681,#3683,#3685,.T.);+#3681 = VERTEX_POINT('',#3682);+#3682 = CARTESIAN_POINT('',(-1.647973751946,-2.263218151067,10.505));+#3683 = VERTEX_POINT('',#3684);+#3684 = CARTESIAN_POINT('',(-1.064389992354,-2.263218151067,10.505));+#3685 = SURFACE_CURVE('',#3686,(#3690),.PCURVE_S1.);+#3686 = LINE('',#3687,#3688);+#3687 = CARTESIAN_POINT('',(-1.647973751946,-2.263218151067,10.505));+#3688 = VECTOR('',#3689,1.);+#3689 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#3690 = PCURVE('',#3691,#3696);+#3691 = PLANE('',#3692);+#3692 = AXIS2_PLACEMENT_3D('',#3693,#3694,#3695);+#3693 = CARTESIAN_POINT('',(-1.064389992354,-2.624236768337,10.505));+#3694 = DIRECTION('',(0.,0.,1.));+#3695 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#3696 = DEFINITIONAL_REPRESENTATION('',(#3697),#3701);+#3697 = LINE('',#3698,#3699);+#3698 = CARTESIAN_POINT('',(0.36101861727,0.583583759592));+#3699 = VECTOR('',#3700,1.);+#3700 = DIRECTION('',(0.,-1.));+#3701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3702 = ORIENTED_EDGE('',*,*,#3703,.T.);+#3703 = EDGE_CURVE('',#3683,#3704,#3706,.T.);+#3704 = VERTEX_POINT('',#3705);+#3705 = CARTESIAN_POINT('',(-1.064389992354,-2.402616700929,10.505));+#3706 = SURFACE_CURVE('',#3707,(#3711),.PCURVE_S1.);+#3707 = LINE('',#3708,#3709);+#3708 = CARTESIAN_POINT('',(-1.064389992354,-2.263218151067,10.505));+#3709 = VECTOR('',#3710,1.);+#3710 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#3711 = PCURVE('',#3691,#3712);+#3712 = DEFINITIONAL_REPRESENTATION('',(#3713),#3717);+#3713 = LINE('',#3714,#3715);+#3714 = CARTESIAN_POINT('',(0.36101861727,4.008111812114E-17));+#3715 = VECTOR('',#3716,1.);+#3716 = DIRECTION('',(-1.,0.));+#3717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3718 = ORIENTED_EDGE('',*,*,#3719,.T.);+#3719 = EDGE_CURVE('',#3704,#3720,#3722,.T.);+#3720 = VERTEX_POINT('',#3721);+#3721 = CARTESIAN_POINT('',(-1.647973751946,-2.402616700929,10.505));+#3722 = SURFACE_CURVE('',#3723,(#3727),.PCURVE_S1.);+#3723 = LINE('',#3724,#3725);+#3724 = CARTESIAN_POINT('',(-1.064389992354,-2.402616700929,10.505));+#3725 = VECTOR('',#3726,1.);+#3726 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#3727 = PCURVE('',#3691,#3728);+#3728 = DEFINITIONAL_REPRESENTATION('',(#3729),#3733);+#3729 = LINE('',#3730,#3731);+#3730 = CARTESIAN_POINT('',(0.221620067408,2.460477015553E-17));+#3731 = VECTOR('',#3732,1.);+#3732 = DIRECTION('',(0.,1.));+#3733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3734 = ORIENTED_EDGE('',*,*,#3735,.T.);+#3735 = EDGE_CURVE('',#3720,#3736,#3738,.T.);+#3736 = VERTEX_POINT('',#3737);+#3737 = CARTESIAN_POINT('',(-1.647973751946,-2.581708397193,10.505));+#3738 = SURFACE_CURVE('',#3739,(#3743),.PCURVE_S1.);+#3739 = LINE('',#3740,#3741);+#3740 = CARTESIAN_POINT('',(-1.647973751946,-2.402616700929,10.505));+#3741 = VECTOR('',#3742,1.);+#3742 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#3743 = PCURVE('',#3691,#3744);+#3744 = DEFINITIONAL_REPRESENTATION('',(#3745),#3749);+#3745 = LINE('',#3746,#3747);+#3746 = CARTESIAN_POINT('',(0.221620067408,0.583583759592));+#3747 = VECTOR('',#3748,1.);+#3748 = DIRECTION('',(-1.,0.));+#3749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3750 = ORIENTED_EDGE('',*,*,#3751,.T.);+#3751 = EDGE_CURVE('',#3736,#3752,#3754,.T.);+#3752 = VERTEX_POINT('',#3753);+#3753 = CARTESIAN_POINT('',(-1.769888415893,-2.581708397193,10.505));+#3754 = SURFACE_CURVE('',#3755,(#3759),.PCURVE_S1.);+#3755 = LINE('',#3756,#3757);+#3756 = CARTESIAN_POINT('',(-1.647973751946,-2.581708397193,10.505));+#3757 = VECTOR('',#3758,1.);+#3758 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#3759 = PCURVE('',#3691,#3760);+#3760 = DEFINITIONAL_REPRESENTATION('',(#3761),#3765);+#3761 = LINE('',#3762,#3763);+#3762 = CARTESIAN_POINT('',(4.2528371144E-02,0.583583759592));+#3763 = VECTOR('',#3764,1.);+#3764 = DIRECTION('',(0.,1.));+#3765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3766 = ORIENTED_EDGE('',*,*,#3767,.T.);+#3767 = EDGE_CURVE('',#3752,#3768,#3770,.T.);+#3768 = VERTEX_POINT('',#3769);+#3769 = CARTESIAN_POINT('',(-1.769888415893,-2.084126454803,10.505));+#3770 = SURFACE_CURVE('',#3771,(#3775),.PCURVE_S1.);+#3771 = LINE('',#3772,#3773);+#3772 = CARTESIAN_POINT('',(-1.769888415893,-2.581708397193,10.505));+#3773 = VECTOR('',#3774,1.);+#3774 = DIRECTION('',(1.110223024625E-16,1.,0.));+#3775 = PCURVE('',#3691,#3776);+#3776 = DEFINITIONAL_REPRESENTATION('',(#3777),#3781);+#3777 = LINE('',#3778,#3779);+#3778 = CARTESIAN_POINT('',(4.2528371144E-02,0.705498423539));+#3779 = VECTOR('',#3780,1.);+#3780 = DIRECTION('',(1.,0.));+#3781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3782 = ORIENTED_EDGE('',*,*,#3783,.T.);+#3783 = EDGE_CURVE('',#3768,#3784,#3786,.T.);+#3784 = VERTEX_POINT('',#3785);+#3785 = CARTESIAN_POINT('',(-1.647973751946,-2.084126454803,10.505));+#3786 = SURFACE_CURVE('',#3787,(#3791),.PCURVE_S1.);+#3787 = LINE('',#3788,#3789);+#3788 = CARTESIAN_POINT('',(-1.769888415893,-2.084126454803,10.505));+#3789 = VECTOR('',#3790,1.);+#3790 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#3791 = PCURVE('',#3691,#3792);+#3792 = DEFINITIONAL_REPRESENTATION('',(#3793),#3797);+#3793 = LINE('',#3794,#3795);+#3794 = CARTESIAN_POINT('',(0.540110313534,0.705498423539));+#3795 = VECTOR('',#3796,1.);+#3796 = DIRECTION('',(0.,-1.));+#3797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3798 = ORIENTED_EDGE('',*,*,#3799,.T.);+#3799 = EDGE_CURVE('',#3784,#3681,#3800,.T.);+#3800 = SURFACE_CURVE('',#3801,(#3805),.PCURVE_S1.);+#3801 = LINE('',#3802,#3803);+#3802 = CARTESIAN_POINT('',(-1.647973751946,-2.084126454803,10.505));+#3803 = VECTOR('',#3804,1.);+#3804 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#3805 = PCURVE('',#3691,#3806);+#3806 = DEFINITIONAL_REPRESENTATION('',(#3807),#3811);+#3807 = LINE('',#3808,#3809);+#3808 = CARTESIAN_POINT('',(0.540110313534,0.583583759592));+#3809 = VECTOR('',#3810,1.);+#3810 = DIRECTION('',(-1.,0.));+#3811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3812 = SHELL_BASED_SURFACE_MODEL('',(#3813));+#3813 = OPEN_SHELL('',(#3814));+#3814 = ADVANCED_FACE('',(#3815),#3829,.T.);+#3815 = FACE_BOUND('',#3816,.F.);+#3816 = EDGE_LOOP('',(#3817,#3840,#3856,#3872,#3888,#3904,#3920,#3936,+    #3952,#3968,#3984));+#3817 = ORIENTED_EDGE('',*,*,#3818,.T.);+#3818 = EDGE_CURVE('',#3819,#3821,#3823,.T.);+#3819 = VERTEX_POINT('',#3820);+#3820 = CARTESIAN_POINT('',(-1.064389992354,-1.952761041713,10.505));+#3821 = VERTEX_POINT('',#3822);+#3822 = CARTESIAN_POINT('',(-1.187249731215,-1.952761041713,10.505));+#3823 = SURFACE_CURVE('',#3824,(#3828),.PCURVE_S1.);+#3824 = LINE('',#3825,#3826);+#3825 = CARTESIAN_POINT('',(-1.064389992354,-1.952761041713,10.505));+#3826 = VECTOR('',#3827,1.);+#3827 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#3828 = PCURVE('',#3829,#3834);+#3829 = PLANE('',#3830);+#3830 = AXIS2_PLACEMENT_3D('',#3831,#3832,#3833);+#3831 = CARTESIAN_POINT('',(-1.064389992354,-2.041598083659,10.505));+#3832 = DIRECTION('',(0.,0.,1.));+#3833 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#3834 = DEFINITIONAL_REPRESENTATION('',(#3835),#3839);+#3835 = LINE('',#3836,#3837);+#3836 = CARTESIAN_POINT('',(8.8837041946E-02,9.862892940803E-18));+#3837 = VECTOR('',#3838,1.);+#3838 = DIRECTION('',(0.,1.));+#3839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3840 = ORIENTED_EDGE('',*,*,#3841,.T.);+#3841 = EDGE_CURVE('',#3821,#3842,#3844,.T.);+#3842 = VERTEX_POINT('',#3843);+#3843 = CARTESIAN_POINT('',(-1.187249731215,-1.79682368085,10.505));+#3844 = SURFACE_CURVE('',#3845,(#3849),.PCURVE_S1.);+#3845 = LINE('',#3846,#3847);+#3846 = CARTESIAN_POINT('',(-1.187249731215,-1.952761041713,10.505));+#3847 = VECTOR('',#3848,1.);+#3848 = DIRECTION('',(1.110223024625E-16,1.,0.));+#3849 = PCURVE('',#3829,#3850);+#3850 = DEFINITIONAL_REPRESENTATION('',(#3851),#3855);+#3851 = LINE('',#3852,#3853);+#3852 = CARTESIAN_POINT('',(8.8837041946E-02,0.122859738861));+#3853 = VECTOR('',#3854,1.);+#3854 = DIRECTION('',(1.,0.));+#3855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3856 = ORIENTED_EDGE('',*,*,#3857,.T.);+#3857 = EDGE_CURVE('',#3842,#3858,#3860,.T.);+#3858 = VERTEX_POINT('',#3859);+#3859 = CARTESIAN_POINT('',(-1.645138527203,-1.79682368085,10.505));+#3860 = SURFACE_CURVE('',#3861,(#3865),.PCURVE_S1.);+#3861 = LINE('',#3862,#3863);+#3862 = CARTESIAN_POINT('',(-1.187249731215,-1.79682368085,10.505));+#3863 = VECTOR('',#3864,1.);+#3864 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#3865 = PCURVE('',#3829,#3866);+#3866 = DEFINITIONAL_REPRESENTATION('',(#3867),#3871);+#3867 = LINE('',#3868,#3869);+#3868 = CARTESIAN_POINT('',(0.244774402809,0.122859738861));+#3869 = VECTOR('',#3870,1.);+#3870 = DIRECTION('',(0.,1.));+#3871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3872 = ORIENTED_EDGE('',*,*,#3873,.T.);+#3873 = EDGE_CURVE('',#3858,#3874,#3876,.T.);+#3874 = VERTEX_POINT('',#3875);+#3875 = CARTESIAN_POINT('',(-1.609225680459,-1.941892680198,10.505));+#3876 = SURFACE_CURVE('',#3877,(#3881),.PCURVE_S1.);+#3877 = LINE('',#3878,#3879);+#3878 = CARTESIAN_POINT('',(-1.645138527203,-1.79682368085,10.505));+#3879 = VECTOR('',#3880,1.);+#3880 = DIRECTION('',(0.240303066167,-0.970697912015,0.));+#3881 = PCURVE('',#3829,#3882);+#3882 = DEFINITIONAL_REPRESENTATION('',(#3883),#3887);+#3883 = LINE('',#3884,#3885);+#3884 = CARTESIAN_POINT('',(0.244774402809,0.580748534849));+#3885 = VECTOR('',#3886,1.);+#3886 = DIRECTION('',(-0.970697912015,-0.240303066167));+#3887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3888 = ORIENTED_EDGE('',*,*,#3889,.T.);+#3889 = EDGE_CURVE('',#3874,#3890,#3892,.T.);+#3890 = VERTEX_POINT('',#3891);+#3891 = CARTESIAN_POINT('',(-1.734920644064,-1.941892680198,10.505));+#3892 = SURFACE_CURVE('',#3893,(#3897),.PCURVE_S1.);+#3893 = LINE('',#3894,#3895);+#3894 = CARTESIAN_POINT('',(-1.609225680459,-1.941892680198,10.505));+#3895 = VECTOR('',#3896,1.);+#3896 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#3897 = PCURVE('',#3829,#3898);+#3898 = DEFINITIONAL_REPRESENTATION('',(#3899),#3903);+#3899 = LINE('',#3900,#3901);+#3900 = CARTESIAN_POINT('',(9.9705403461E-02,0.544835688105));+#3901 = VECTOR('',#3902,1.);+#3902 = DIRECTION('',(0.,1.));+#3903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3904 = ORIENTED_EDGE('',*,*,#3905,.T.);+#3905 = EDGE_CURVE('',#3890,#3906,#3908,.T.);+#3906 = VERTEX_POINT('',#3907);+#3907 = CARTESIAN_POINT('',(-1.769888415893,-1.795878605936,10.505));+#3908 = SURFACE_CURVE('',#3909,(#3913),.PCURVE_S1.);+#3909 = LINE('',#3910,#3911);+#3910 = CARTESIAN_POINT('',(-1.734920644064,-1.941892680198,10.505));+#3911 = VECTOR('',#3912,1.);+#3912 = DIRECTION('',(-0.232896789262,0.972501457866,0.));+#3913 = PCURVE('',#3829,#3914);+#3914 = DEFINITIONAL_REPRESENTATION('',(#3915),#3919);+#3915 = LINE('',#3916,#3917);+#3916 = CARTESIAN_POINT('',(9.9705403461E-02,0.67053065171));+#3917 = VECTOR('',#3918,1.);+#3918 = DIRECTION('',(0.972501457866,0.232896789262));+#3919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3920 = ORIENTED_EDGE('',*,*,#3921,.T.);+#3921 = EDGE_CURVE('',#3906,#3922,#3924,.T.);+#3922 = VERTEX_POINT('',#3923);+#3923 = CARTESIAN_POINT('',(-1.769888415893,-1.661205430645,10.505));+#3924 = SURFACE_CURVE('',#3925,(#3929),.PCURVE_S1.);+#3925 = LINE('',#3926,#3927);+#3926 = CARTESIAN_POINT('',(-1.769888415893,-1.795878605936,10.505));+#3927 = VECTOR('',#3928,1.);+#3928 = DIRECTION('',(1.110223024625E-16,1.,0.));+#3929 = PCURVE('',#3829,#3930);+#3930 = DEFINITIONAL_REPRESENTATION('',(#3931),#3935);+#3931 = LINE('',#3932,#3933);+#3932 = CARTESIAN_POINT('',(0.245719477723,0.705498423539));+#3933 = VECTOR('',#3934,1.);+#3934 = DIRECTION('',(1.,0.));+#3935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3936 = ORIENTED_EDGE('',*,*,#3937,.T.);+#3937 = EDGE_CURVE('',#3922,#3938,#3940,.T.);+#3938 = VERTEX_POINT('',#3939);+#3939 = CARTESIAN_POINT('',(-1.187249731215,-1.661205430645,10.505));+#3940 = SURFACE_CURVE('',#3941,(#3945),.PCURVE_S1.);+#3941 = LINE('',#3942,#3943);+#3942 = CARTESIAN_POINT('',(-1.769888415893,-1.661205430645,10.505));+#3943 = VECTOR('',#3944,1.);+#3944 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#3945 = PCURVE('',#3829,#3946);+#3946 = DEFINITIONAL_REPRESENTATION('',(#3947),#3951);+#3947 = LINE('',#3948,#3949);+#3948 = CARTESIAN_POINT('',(0.380392653014,0.705498423539));+#3949 = VECTOR('',#3950,1.);+#3950 = DIRECTION('',(0.,-1.));+#3951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3952 = ORIENTED_EDGE('',*,*,#3953,.T.);+#3953 = EDGE_CURVE('',#3938,#3954,#3956,.T.);+#3954 = VERTEX_POINT('',#3955);+#3955 = CARTESIAN_POINT('',(-1.187249731215,-1.505268069783,10.505));+#3956 = SURFACE_CURVE('',#3957,(#3961),.PCURVE_S1.);+#3957 = LINE('',#3958,#3959);+#3958 = CARTESIAN_POINT('',(-1.187249731215,-1.661205430645,10.505));+#3959 = VECTOR('',#3960,1.);+#3960 = DIRECTION('',(1.110223024625E-16,1.,0.));+#3961 = PCURVE('',#3829,#3962);+#3962 = DEFINITIONAL_REPRESENTATION('',(#3963),#3967);+#3963 = LINE('',#3964,#3965);+#3964 = CARTESIAN_POINT('',(0.380392653014,0.122859738861));+#3965 = VECTOR('',#3966,1.);+#3966 = DIRECTION('',(1.,0.));+#3967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3968 = ORIENTED_EDGE('',*,*,#3969,.T.);+#3969 = EDGE_CURVE('',#3954,#3970,#3972,.T.);+#3970 = VERTEX_POINT('',#3971);+#3971 = CARTESIAN_POINT('',(-1.064389992354,-1.505268069783,10.505));+#3972 = SURFACE_CURVE('',#3973,(#3977),.PCURVE_S1.);+#3973 = LINE('',#3974,#3975);+#3974 = CARTESIAN_POINT('',(-1.187249731215,-1.505268069783,10.505));+#3975 = VECTOR('',#3976,1.);+#3976 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#3977 = PCURVE('',#3829,#3978);+#3978 = DEFINITIONAL_REPRESENTATION('',(#3979),#3983);+#3979 = LINE('',#3980,#3981);+#3980 = CARTESIAN_POINT('',(0.536330013876,0.122859738861));+#3981 = VECTOR('',#3982,1.);+#3982 = DIRECTION('',(0.,-1.));+#3983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3984 = ORIENTED_EDGE('',*,*,#3985,.T.);+#3985 = EDGE_CURVE('',#3970,#3819,#3986,.T.);+#3986 = SURFACE_CURVE('',#3987,(#3991),.PCURVE_S1.);+#3987 = LINE('',#3988,#3989);+#3988 = CARTESIAN_POINT('',(-1.064389992354,-1.505268069783,10.505));+#3989 = VECTOR('',#3990,1.);+#3990 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#3991 = PCURVE('',#3829,#3992);+#3992 = DEFINITIONAL_REPRESENTATION('',(#3993),#3997);+#3993 = LINE('',#3994,#3995);+#3994 = CARTESIAN_POINT('',(0.536330013876,5.954459302026E-17));+#3995 = VECTOR('',#3996,1.);+#3996 = DIRECTION('',(-1.,0.));+#3997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#3998 = SHELL_BASED_SURFACE_MODEL('',(#3999));+#3999 = OPEN_SHELL('',(#4000));+#4000 = ADVANCED_FACE('',(#4001),#4015,.T.);+#4001 = FACE_BOUND('',#4002,.F.);+#4002 = EDGE_LOOP('',(#4003,#4026,#4042,#4058,#4074,#4090,#4106,#4122,+    #4138,#4154,#4170,#4186,#4202,#4218));+#4003 = ORIENTED_EDGE('',*,*,#4004,.T.);+#4004 = EDGE_CURVE('',#4005,#4007,#4009,.T.);+#4005 = VERTEX_POINT('',#4006);+#4006 = CARTESIAN_POINT('',(-1.099357764184,-1.40745281615,10.505));+#4007 = VERTEX_POINT('',#4008);+#4008 = CARTESIAN_POINT('',(-1.260965574532,-1.40745281615,10.505));+#4009 = SURFACE_CURVE('',#4010,(#4014),.PCURVE_S1.);+#4010 = LINE('',#4011,#4012);+#4011 = CARTESIAN_POINT('',(-1.099357764184,-1.40745281615,10.505));+#4012 = VECTOR('',#4013,1.);+#4013 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4014 = PCURVE('',#4015,#4020);+#4015 = PLANE('',#4016);+#4016 = AXIS2_PLACEMENT_3D('',#4017,#4018,#4019);+#4017 = CARTESIAN_POINT('',(-1.064389992354,-1.458959398981,10.505));+#4018 = DIRECTION('',(0.,0.,1.));+#4019 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#4020 = DEFINITIONAL_REPRESENTATION('',(#4021),#4025);+#4021 = LINE('',#4022,#4023);+#4022 = CARTESIAN_POINT('',(5.1506582831E-02,3.496777183E-02));+#4023 = VECTOR('',#4024,1.);+#4024 = DIRECTION('',(0.,1.));+#4025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4026 = ORIENTED_EDGE('',*,*,#4027,.T.);+#4027 = EDGE_CURVE('',#4007,#4028,#4030,.T.);+#4028 = VERTEX_POINT('',#4029);+#4029 = CARTESIAN_POINT('',(-1.197645555273,-1.320742192762,10.505));+#4030 = SURFACE_CURVE('',#4031,(#4035),.PCURVE_S1.);+#4031 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4032,#4033,#4034),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4032 = CARTESIAN_POINT('',(-1.260965574532,-1.40745281615,10.505));+#4033 = CARTESIAN_POINT('',(-1.219382278302,-1.366814594835,10.505));+#4034 = CARTESIAN_POINT('',(-1.197645555273,-1.320742192762,10.505));+#4035 = PCURVE('',#4015,#4036);+#4036 = DEFINITIONAL_REPRESENTATION('',(#4037),#4041);+#4037 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4038,#4039,#4040),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4038 = CARTESIAN_POINT('',(5.1506582831E-02,0.196575582178));+#4039 = CARTESIAN_POINT('',(9.2144804146E-02,0.154992285948));+#4040 = CARTESIAN_POINT('',(0.138217206219,0.133255562919));+#4041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4042 = ORIENTED_EDGE('',*,*,#4043,.T.);+#4043 = EDGE_CURVE('',#4028,#4044,#4046,.T.);+#4044 = VERTEX_POINT('',#4045);+#4045 = CARTESIAN_POINT('',(-1.175908832244,-1.22788858243,10.505));+#4046 = SURFACE_CURVE('',#4047,(#4051),.PCURVE_S1.);+#4047 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4048,#4049,#4050),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4048 = CARTESIAN_POINT('',(-1.197645555273,-1.320742192762,10.505));+#4049 = CARTESIAN_POINT('',(-1.175908832244,-1.274669790689,10.505));+#4050 = CARTESIAN_POINT('',(-1.175908832244,-1.22788858243,10.505));+#4051 = PCURVE('',#4015,#4052);+#4052 = DEFINITIONAL_REPRESENTATION('',(#4053),#4057);+#4053 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4054,#4055,#4056),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4054 = CARTESIAN_POINT('',(0.138217206219,0.133255562919));+#4055 = CARTESIAN_POINT('',(0.184289608292,0.11151883989));+#4056 = CARTESIAN_POINT('',(0.231070816551,0.11151883989));+#4057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4058 = ORIENTED_EDGE('',*,*,#4059,.T.);+#4059 = EDGE_CURVE('',#4044,#4060,#4062,.T.);+#4060 = VERTEX_POINT('',#4061);+#4061 = CARTESIAN_POINT('',(-1.203316004759,-1.147557214713,10.505));+#4062 = SURFACE_CURVE('',#4063,(#4067),.PCURVE_S1.);+#4063 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4064,#4065,#4066),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4064 = CARTESIAN_POINT('',(-1.175908832244,-1.22788858243,10.505));+#4065 = CARTESIAN_POINT('',(-1.175908832244,-1.173074237399,10.505));+#4066 = CARTESIAN_POINT('',(-1.203316004759,-1.147557214713,10.505));+#4067 = PCURVE('',#4015,#4068);+#4068 = DEFINITIONAL_REPRESENTATION('',(#4069),#4073);+#4069 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4070,#4071,#4072),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4070 = CARTESIAN_POINT('',(0.231070816551,0.11151883989));+#4071 = CARTESIAN_POINT('',(0.285885161582,0.11151883989));+#4072 = CARTESIAN_POINT('',(0.311402184268,0.138926012405));+#4073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4074 = ORIENTED_EDGE('',*,*,#4075,.T.);+#4075 = EDGE_CURVE('',#4060,#4076,#4078,.T.);+#4076 = VERTEX_POINT('',#4077);+#4077 = CARTESIAN_POINT('',(-1.290735434333,-1.122040192026,10.505));+#4078 = SURFACE_CURVE('',#4079,(#4083),.PCURVE_S1.);+#4079 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4080,#4081,#4082),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4080 = CARTESIAN_POINT('',(-1.203316004759,-1.147557214713,10.505));+#4081 = CARTESIAN_POINT('',(-1.230723177274,-1.122040192026,10.505));+#4082 = CARTESIAN_POINT('',(-1.290735434333,-1.122040192026,10.505));+#4083 = PCURVE('',#4015,#4084);+#4084 = DEFINITIONAL_REPRESENTATION('',(#4085),#4089);+#4085 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4086,#4087,#4088),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4086 = CARTESIAN_POINT('',(0.311402184268,0.138926012405));+#4087 = CARTESIAN_POINT('',(0.336919206955,0.16633318492));+#4088 = CARTESIAN_POINT('',(0.336919206955,0.226345441979));+#4089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4090 = ORIENTED_EDGE('',*,*,#4091,.T.);+#4091 = EDGE_CURVE('',#4076,#4092,#4094,.T.);+#4092 = VERTEX_POINT('',#4093);+#4093 = CARTESIAN_POINT('',(-1.647028677032,-1.122040192026,10.505));+#4094 = SURFACE_CURVE('',#4095,(#4099),.PCURVE_S1.);+#4095 = LINE('',#4096,#4097);+#4096 = CARTESIAN_POINT('',(-1.290735434333,-1.122040192026,10.505));+#4097 = VECTOR('',#4098,1.);+#4098 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4099 = PCURVE('',#4015,#4100);+#4100 = DEFINITIONAL_REPRESENTATION('',(#4101),#4105);+#4101 = LINE('',#4102,#4103);+#4102 = CARTESIAN_POINT('',(0.336919206955,0.226345441979));+#4103 = VECTOR('',#4104,1.);+#4104 = DIRECTION('',(0.,1.));+#4105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4106 = ORIENTED_EDGE('',*,*,#4107,.T.);+#4107 = EDGE_CURVE('',#4092,#4108,#4110,.T.);+#4108 = VERTEX_POINT('',#4109);+#4109 = CARTESIAN_POINT('',(-1.647028677032,-1.292626214061,10.505));+#4110 = SURFACE_CURVE('',#4111,(#4115),.PCURVE_S1.);+#4111 = LINE('',#4112,#4113);+#4112 = CARTESIAN_POINT('',(-1.647028677032,-1.122040192026,10.505));+#4113 = VECTOR('',#4114,1.);+#4114 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4115 = PCURVE('',#4015,#4116);+#4116 = DEFINITIONAL_REPRESENTATION('',(#4117),#4121);+#4117 = LINE('',#4118,#4119);+#4118 = CARTESIAN_POINT('',(0.336919206955,0.582638684678));+#4119 = VECTOR('',#4120,1.);+#4120 = DIRECTION('',(-1.,0.));+#4121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4122 = ORIENTED_EDGE('',*,*,#4123,.T.);+#4123 = EDGE_CURVE('',#4108,#4124,#4126,.T.);+#4124 = VERTEX_POINT('',#4125);+#4125 = CARTESIAN_POINT('',(-1.769888415893,-1.292626214061,10.505));+#4126 = SURFACE_CURVE('',#4127,(#4131),.PCURVE_S1.);+#4127 = LINE('',#4128,#4129);+#4128 = CARTESIAN_POINT('',(-1.647028677032,-1.292626214061,10.505));+#4129 = VECTOR('',#4130,1.);+#4130 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4131 = PCURVE('',#4015,#4132);+#4132 = DEFINITIONAL_REPRESENTATION('',(#4133),#4137);+#4133 = LINE('',#4134,#4135);+#4134 = CARTESIAN_POINT('',(0.16633318492,0.582638684678));+#4135 = VECTOR('',#4136,1.);+#4136 = DIRECTION('',(0.,1.));+#4137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4138 = ORIENTED_EDGE('',*,*,#4139,.T.);+#4139 = EDGE_CURVE('',#4124,#4140,#4142,.T.);+#4140 = VERTEX_POINT('',#4141);+#4141 = CARTESIAN_POINT('',(-1.769888415893,-0.982641642164,10.505));+#4142 = SURFACE_CURVE('',#4143,(#4147),.PCURVE_S1.);+#4143 = LINE('',#4144,#4145);+#4144 = CARTESIAN_POINT('',(-1.769888415893,-1.292626214061,10.505));+#4145 = VECTOR('',#4146,1.);+#4146 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4147 = PCURVE('',#4015,#4148);+#4148 = DEFINITIONAL_REPRESENTATION('',(#4149),#4153);+#4149 = LINE('',#4150,#4151);+#4150 = CARTESIAN_POINT('',(0.16633318492,0.705498423539));+#4151 = VECTOR('',#4152,1.);+#4152 = DIRECTION('',(1.,0.));+#4153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4154 = ORIENTED_EDGE('',*,*,#4155,.T.);+#4155 = EDGE_CURVE('',#4140,#4156,#4158,.T.);+#4156 = VERTEX_POINT('',#4157);+#4157 = CARTESIAN_POINT('',(-1.290735434333,-0.982641642164,10.505));+#4158 = SURFACE_CURVE('',#4159,(#4163),.PCURVE_S1.);+#4159 = LINE('',#4160,#4161);+#4160 = CARTESIAN_POINT('',(-1.769888415893,-0.982641642164,10.505));+#4161 = VECTOR('',#4162,1.);+#4162 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4163 = PCURVE('',#4015,#4164);+#4164 = DEFINITIONAL_REPRESENTATION('',(#4165),#4169);+#4165 = LINE('',#4166,#4167);+#4166 = CARTESIAN_POINT('',(0.476317756817,0.705498423539));+#4167 = VECTOR('',#4168,1.);+#4168 = DIRECTION('',(0.,-1.));+#4169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4170 = ORIENTED_EDGE('',*,*,#4171,.T.);+#4171 = EDGE_CURVE('',#4156,#4172,#4174,.T.);+#4172 = VERTEX_POINT('',#4173);+#4173 = CARTESIAN_POINT('',(-1.106209557313,-1.036747181009,10.505));+#4174 = SURFACE_CURVE('',#4175,(#4179),.PCURVE_S1.);+#4175 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4176,#4177,#4178),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4176 = CARTESIAN_POINT('',(-1.290735434333,-0.982641642164,10.505));+#4177 = CARTESIAN_POINT('',(-1.161732708529,-0.982641642164,10.505));+#4178 = CARTESIAN_POINT('',(-1.106209557313,-1.036747181009,10.505));+#4179 = PCURVE('',#4015,#4180);+#4180 = DEFINITIONAL_REPRESENTATION('',(#4181),#4185);+#4181 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4182,#4183,#4184),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4182 = CARTESIAN_POINT('',(0.476317756817,0.226345441979));+#4183 = CARTESIAN_POINT('',(0.476317756817,9.7342716175E-02));+#4184 = CARTESIAN_POINT('',(0.422212217972,4.1819564959E-02));+#4185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4186 = ORIENTED_EDGE('',*,*,#4187,.T.);+#4187 = EDGE_CURVE('',#4172,#4188,#4190,.T.);+#4188 = VERTEX_POINT('',#4189);+#4189 = CARTESIAN_POINT('',(-1.050686406096,-1.215130071086,10.505));+#4190 = SURFACE_CURVE('',#4191,(#4195),.PCURVE_S1.);+#4191 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4192,#4193,#4194),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4192 = CARTESIAN_POINT('',(-1.106209557313,-1.036747181009,10.505));+#4193 = CARTESIAN_POINT('',(-1.050686406096,-1.090852719853,10.505));+#4194 = CARTESIAN_POINT('',(-1.050686406096,-1.215130071086,10.505));+#4195 = PCURVE('',#4015,#4196);+#4196 = DEFINITIONAL_REPRESENTATION('',(#4197),#4201);+#4197 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4198,#4199,#4200),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4198 = CARTESIAN_POINT('',(0.422212217972,4.1819564959E-02));+#4199 = CARTESIAN_POINT('',(0.368106679128,-1.3703586258E-02));+#4200 = CARTESIAN_POINT('',(0.243829327895,-1.3703586258E-02));+#4201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4202 = ORIENTED_EDGE('',*,*,#4203,.T.);+#4203 = EDGE_CURVE('',#4188,#4204,#4206,.T.);+#4204 = VERTEX_POINT('',#4205);+#4205 = CARTESIAN_POINT('',(-1.062972379982,-1.308928756333,10.505));+#4206 = SURFACE_CURVE('',#4207,(#4211),.PCURVE_S1.);+#4207 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4208,#4209,#4210),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4208 = CARTESIAN_POINT('',(-1.050686406096,-1.215130071086,10.505));+#4209 = CARTESIAN_POINT('',(-1.050686406096,-1.260021129517,10.505));+#4210 = CARTESIAN_POINT('',(-1.062972379982,-1.308928756333,10.505));+#4211 = PCURVE('',#4015,#4212);+#4212 = DEFINITIONAL_REPRESENTATION('',(#4213),#4217);+#4213 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4214,#4215,#4216),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4214 = CARTESIAN_POINT('',(0.243829327895,-1.3703586258E-02));+#4215 = CARTESIAN_POINT('',(0.198938269464,-1.3703586258E-02));+#4216 = CARTESIAN_POINT('',(0.150030642648,-1.417612372E-03));+#4217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4218 = ORIENTED_EDGE('',*,*,#4219,.T.);+#4219 = EDGE_CURVE('',#4204,#4005,#4220,.T.);+#4220 = SURFACE_CURVE('',#4221,(#4225),.PCURVE_S1.);+#4221 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4222,#4223,#4224),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4222 = CARTESIAN_POINT('',(-1.062972379982,-1.308928756333,10.505));+#4223 = CARTESIAN_POINT('',(-1.075258353869,-1.357836383149,10.505));+#4224 = CARTESIAN_POINT('',(-1.099357764184,-1.40745281615,10.505));+#4225 = PCURVE('',#4015,#4226);+#4226 = DEFINITIONAL_REPRESENTATION('',(#4227),#4231);+#4227 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4228,#4229,#4230),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4228 = CARTESIAN_POINT('',(0.150030642648,-1.417612372E-03));+#4229 = CARTESIAN_POINT('',(0.101123015832,1.0868361515E-02));+#4230 = CARTESIAN_POINT('',(5.1506582831E-02,3.496777183E-02));+#4231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4232 = SHELL_BASED_SURFACE_MODEL('',(#4233));+#4233 = OPEN_SHELL('',(#4234));+#4234 = ADVANCED_FACE('',(#4235),#4249,.T.);+#4235 = FACE_BOUND('',#4236,.F.);+#4236 = EDGE_LOOP('',(#4237,#4260,#4276,#4292,#4308,#4324,#4340,#4356,+    #4372,#4388,#4404));+#4237 = ORIENTED_EDGE('',*,*,#4238,.T.);+#4238 = EDGE_CURVE('',#4239,#4241,#4243,.T.);+#4239 = VERTEX_POINT('',#4240);+#4240 = CARTESIAN_POINT('',(-1.064389992354,-0.787483672357,10.505));+#4241 = VERTEX_POINT('',#4242);+#4242 = CARTESIAN_POINT('',(-1.187249731215,-0.787483672357,10.505));+#4243 = SURFACE_CURVE('',#4244,(#4248),.PCURVE_S1.);+#4244 = LINE('',#4245,#4246);+#4245 = CARTESIAN_POINT('',(-1.064389992354,-0.787483672357,10.505));+#4246 = VECTOR('',#4247,1.);+#4247 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4248 = PCURVE('',#4249,#4254);+#4249 = PLANE('',#4250);+#4250 = AXIS2_PLACEMENT_3D('',#4251,#4252,#4253);+#4251 = CARTESIAN_POINT('',(-1.064389992354,-0.876320714303,10.505));+#4252 = DIRECTION('',(0.,0.,1.));+#4253 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#4254 = DEFINITIONAL_REPRESENTATION('',(#4255),#4259);+#4255 = LINE('',#4256,#4257);+#4256 = CARTESIAN_POINT('',(8.8837041946E-02,9.862892940803E-18));+#4257 = VECTOR('',#4258,1.);+#4258 = DIRECTION('',(0.,1.));+#4259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4260 = ORIENTED_EDGE('',*,*,#4261,.T.);+#4261 = EDGE_CURVE('',#4241,#4262,#4264,.T.);+#4262 = VERTEX_POINT('',#4263);+#4263 = CARTESIAN_POINT('',(-1.187249731215,-0.631546311494,10.505));+#4264 = SURFACE_CURVE('',#4265,(#4269),.PCURVE_S1.);+#4265 = LINE('',#4266,#4267);+#4266 = CARTESIAN_POINT('',(-1.187249731215,-0.787483672357,10.505));+#4267 = VECTOR('',#4268,1.);+#4268 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4269 = PCURVE('',#4249,#4270);+#4270 = DEFINITIONAL_REPRESENTATION('',(#4271),#4275);+#4271 = LINE('',#4272,#4273);+#4272 = CARTESIAN_POINT('',(8.8837041946E-02,0.122859738861));+#4273 = VECTOR('',#4274,1.);+#4274 = DIRECTION('',(1.,0.));+#4275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4276 = ORIENTED_EDGE('',*,*,#4277,.T.);+#4277 = EDGE_CURVE('',#4262,#4278,#4280,.T.);+#4278 = VERTEX_POINT('',#4279);+#4279 = CARTESIAN_POINT('',(-1.645138527203,-0.631546311494,10.505));+#4280 = SURFACE_CURVE('',#4281,(#4285),.PCURVE_S1.);+#4281 = LINE('',#4282,#4283);+#4282 = CARTESIAN_POINT('',(-1.187249731215,-0.631546311494,10.505));+#4283 = VECTOR('',#4284,1.);+#4284 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4285 = PCURVE('',#4249,#4286);+#4286 = DEFINITIONAL_REPRESENTATION('',(#4287),#4291);+#4287 = LINE('',#4288,#4289);+#4288 = CARTESIAN_POINT('',(0.244774402809,0.122859738861));+#4289 = VECTOR('',#4290,1.);+#4290 = DIRECTION('',(0.,1.));+#4291 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4292 = ORIENTED_EDGE('',*,*,#4293,.T.);+#4293 = EDGE_CURVE('',#4278,#4294,#4296,.T.);+#4294 = VERTEX_POINT('',#4295);+#4295 = CARTESIAN_POINT('',(-1.609225680459,-0.776615310842,10.505));+#4296 = SURFACE_CURVE('',#4297,(#4301),.PCURVE_S1.);+#4297 = LINE('',#4298,#4299);+#4298 = CARTESIAN_POINT('',(-1.645138527203,-0.631546311494,10.505));+#4299 = VECTOR('',#4300,1.);+#4300 = DIRECTION('',(0.240303066167,-0.970697912015,0.));+#4301 = PCURVE('',#4249,#4302);+#4302 = DEFINITIONAL_REPRESENTATION('',(#4303),#4307);+#4303 = LINE('',#4304,#4305);+#4304 = CARTESIAN_POINT('',(0.244774402809,0.580748534849));+#4305 = VECTOR('',#4306,1.);+#4306 = DIRECTION('',(-0.970697912015,-0.240303066167));+#4307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4308 = ORIENTED_EDGE('',*,*,#4309,.T.);+#4309 = EDGE_CURVE('',#4294,#4310,#4312,.T.);+#4310 = VERTEX_POINT('',#4311);+#4311 = CARTESIAN_POINT('',(-1.734920644064,-0.776615310842,10.505));+#4312 = SURFACE_CURVE('',#4313,(#4317),.PCURVE_S1.);+#4313 = LINE('',#4314,#4315);+#4314 = CARTESIAN_POINT('',(-1.609225680459,-0.776615310842,10.505));+#4315 = VECTOR('',#4316,1.);+#4316 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4317 = PCURVE('',#4249,#4318);+#4318 = DEFINITIONAL_REPRESENTATION('',(#4319),#4323);+#4319 = LINE('',#4320,#4321);+#4320 = CARTESIAN_POINT('',(9.9705403461E-02,0.544835688105));+#4321 = VECTOR('',#4322,1.);+#4322 = DIRECTION('',(0.,1.));+#4323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4324 = ORIENTED_EDGE('',*,*,#4325,.T.);+#4325 = EDGE_CURVE('',#4310,#4326,#4328,.T.);+#4326 = VERTEX_POINT('',#4327);+#4327 = CARTESIAN_POINT('',(-1.769888415893,-0.63060123658,10.505));+#4328 = SURFACE_CURVE('',#4329,(#4333),.PCURVE_S1.);+#4329 = LINE('',#4330,#4331);+#4330 = CARTESIAN_POINT('',(-1.734920644064,-0.776615310842,10.505));+#4331 = VECTOR('',#4332,1.);+#4332 = DIRECTION('',(-0.232896789262,0.972501457866,0.));+#4333 = PCURVE('',#4249,#4334);+#4334 = DEFINITIONAL_REPRESENTATION('',(#4335),#4339);+#4335 = LINE('',#4336,#4337);+#4336 = CARTESIAN_POINT('',(9.9705403461E-02,0.67053065171));+#4337 = VECTOR('',#4338,1.);+#4338 = DIRECTION('',(0.972501457866,0.232896789262));+#4339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4340 = ORIENTED_EDGE('',*,*,#4341,.T.);+#4341 = EDGE_CURVE('',#4326,#4342,#4344,.T.);+#4342 = VERTEX_POINT('',#4343);+#4343 = CARTESIAN_POINT('',(-1.769888415893,-0.495928061289,10.505));+#4344 = SURFACE_CURVE('',#4345,(#4349),.PCURVE_S1.);+#4345 = LINE('',#4346,#4347);+#4346 = CARTESIAN_POINT('',(-1.769888415893,-0.63060123658,10.505));+#4347 = VECTOR('',#4348,1.);+#4348 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4349 = PCURVE('',#4249,#4350);+#4350 = DEFINITIONAL_REPRESENTATION('',(#4351),#4355);+#4351 = LINE('',#4352,#4353);+#4352 = CARTESIAN_POINT('',(0.245719477723,0.705498423539));+#4353 = VECTOR('',#4354,1.);+#4354 = DIRECTION('',(1.,0.));+#4355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4356 = ORIENTED_EDGE('',*,*,#4357,.T.);+#4357 = EDGE_CURVE('',#4342,#4358,#4360,.T.);+#4358 = VERTEX_POINT('',#4359);+#4359 = CARTESIAN_POINT('',(-1.187249731215,-0.495928061289,10.505));+#4360 = SURFACE_CURVE('',#4361,(#4365),.PCURVE_S1.);+#4361 = LINE('',#4362,#4363);+#4362 = CARTESIAN_POINT('',(-1.769888415893,-0.495928061289,10.505));+#4363 = VECTOR('',#4364,1.);+#4364 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4365 = PCURVE('',#4249,#4366);+#4366 = DEFINITIONAL_REPRESENTATION('',(#4367),#4371);+#4367 = LINE('',#4368,#4369);+#4368 = CARTESIAN_POINT('',(0.380392653014,0.705498423539));+#4369 = VECTOR('',#4370,1.);+#4370 = DIRECTION('',(0.,-1.));+#4371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4372 = ORIENTED_EDGE('',*,*,#4373,.T.);+#4373 = EDGE_CURVE('',#4358,#4374,#4376,.T.);+#4374 = VERTEX_POINT('',#4375);+#4375 = CARTESIAN_POINT('',(-1.187249731215,-0.339990700426,10.505));+#4376 = SURFACE_CURVE('',#4377,(#4381),.PCURVE_S1.);+#4377 = LINE('',#4378,#4379);+#4378 = CARTESIAN_POINT('',(-1.187249731215,-0.495928061289,10.505));+#4379 = VECTOR('',#4380,1.);+#4380 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4381 = PCURVE('',#4249,#4382);+#4382 = DEFINITIONAL_REPRESENTATION('',(#4383),#4387);+#4383 = LINE('',#4384,#4385);+#4384 = CARTESIAN_POINT('',(0.380392653014,0.122859738861));+#4385 = VECTOR('',#4386,1.);+#4386 = DIRECTION('',(1.,0.));+#4387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4388 = ORIENTED_EDGE('',*,*,#4389,.T.);+#4389 = EDGE_CURVE('',#4374,#4390,#4392,.T.);+#4390 = VERTEX_POINT('',#4391);+#4391 = CARTESIAN_POINT('',(-1.064389992354,-0.339990700426,10.505));+#4392 = SURFACE_CURVE('',#4393,(#4397),.PCURVE_S1.);+#4393 = LINE('',#4394,#4395);+#4394 = CARTESIAN_POINT('',(-1.187249731215,-0.339990700426,10.505));+#4395 = VECTOR('',#4396,1.);+#4396 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4397 = PCURVE('',#4249,#4398);+#4398 = DEFINITIONAL_REPRESENTATION('',(#4399),#4403);+#4399 = LINE('',#4400,#4401);+#4400 = CARTESIAN_POINT('',(0.536330013877,0.122859738861));+#4401 = VECTOR('',#4402,1.);+#4402 = DIRECTION('',(0.,-1.));+#4403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4404 = ORIENTED_EDGE('',*,*,#4405,.T.);+#4405 = EDGE_CURVE('',#4390,#4239,#4406,.T.);+#4406 = SURFACE_CURVE('',#4407,(#4411),.PCURVE_S1.);+#4407 = LINE('',#4408,#4409);+#4408 = CARTESIAN_POINT('',(-1.064389992354,-0.339990700426,10.505));+#4409 = VECTOR('',#4410,1.);+#4410 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#4411 = PCURVE('',#4249,#4412);+#4412 = DEFINITIONAL_REPRESENTATION('',(#4413),#4417);+#4413 = LINE('',#4414,#4415);+#4414 = CARTESIAN_POINT('',(0.536330013877,5.954459302037E-17));+#4415 = VECTOR('',#4416,1.);+#4416 = DIRECTION('',(-1.,0.));+#4417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4418 = SHELL_BASED_SURFACE_MODEL('',(#4419));+#4419 = OPEN_SHELL('',(#4420));+#4420 = ADVANCED_FACE('',(#4421),#4435,.T.);+#4421 = FACE_BOUND('',#4422,.F.);+#4422 = EDGE_LOOP('',(#4423,#4446,#4462,#4478,#4494,#4510,#4526,#4542));+#4423 = ORIENTED_EDGE('',*,*,#4424,.T.);+#4424 = EDGE_CURVE('',#4425,#4427,#4429,.T.);+#4425 = VERTEX_POINT('',#4426);+#4426 = CARTESIAN_POINT('',(-1.416430397938,-6.119360070219E-02,10.505)+  );+#4427 = VERTEX_POINT('',#4428);+#4428 = CARTESIAN_POINT('',(-1.458486231625,-4.418225224444E-02,10.505)+  );+#4429 = SURFACE_CURVE('',#4430,(#4434),.PCURVE_S1.);+#4430 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4431,#4432,#4433),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4431 = CARTESIAN_POINT('',(-1.416430397938,-6.119360070219E-02,10.505)+  );+#4432 = CARTESIAN_POINT('',(-1.441474883167,-6.119360070219E-02,10.505)+  );+#4433 = CARTESIAN_POINT('',(-1.458486231625,-4.418225224444E-02,10.505)+  );+#4434 = PCURVE('',#4435,#4440);+#4435 = PLANE('',#4436);+#4436 = AXIS2_PLACEMENT_3D('',#4437,#4438,#4439);+#4437 = CARTESIAN_POINT('',(-1.064389992354,-0.293682029625,10.505));+#4438 = DIRECTION('',(0.,0.,1.));+#4439 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#4440 = DEFINITIONAL_REPRESENTATION('',(#4441),#4445);+#4441 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4442,#4443,#4444),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4442 = CARTESIAN_POINT('',(0.232488428923,0.352040405584));+#4443 = CARTESIAN_POINT('',(0.232488428923,0.377084890813));+#4444 = CARTESIAN_POINT('',(0.249499777381,0.394096239271));+#4445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4446 = ORIENTED_EDGE('',*,*,#4447,.T.);+#4447 = EDGE_CURVE('',#4427,#4448,#4450,.T.);+#4448 = VERTEX_POINT('',#4449);+#4449 = CARTESIAN_POINT('',(-1.475497580083,-2.598956014379E-03,10.505)+  );+#4450 = SURFACE_CURVE('',#4451,(#4455),.PCURVE_S1.);+#4451 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4452,#4453,#4454),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4452 = CARTESIAN_POINT('',(-1.458486231625,-4.418225224444E-02,10.505)+  );+#4453 = CARTESIAN_POINT('',(-1.475497580083,-2.717090378669E-02,10.505)+  );+#4454 = CARTESIAN_POINT('',(-1.475497580083,-2.598956014379E-03,10.505)+  );+#4455 = PCURVE('',#4435,#4456);+#4456 = DEFINITIONAL_REPRESENTATION('',(#4457),#4461);+#4457 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4458,#4459,#4460),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4458 = CARTESIAN_POINT('',(0.249499777381,0.394096239271));+#4459 = CARTESIAN_POINT('',(0.266511125838,0.411107587729));+#4460 = CARTESIAN_POINT('',(0.291083073611,0.411107587729));+#4461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4462 = ORIENTED_EDGE('',*,*,#4463,.T.);+#4463 = EDGE_CURVE('',#4448,#4464,#4466,.T.);+#4464 = VERTEX_POINT('',#4465);+#4465 = CARTESIAN_POINT('',(-1.458486231625,3.945687767284E-02,10.505));+#4466 = SURFACE_CURVE('',#4467,(#4471),.PCURVE_S1.);+#4467 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4468,#4469,#4470),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4468 = CARTESIAN_POINT('',(-1.475497580083,-2.598956014379E-03,10.505)+  );+#4469 = CARTESIAN_POINT('',(-1.475497580083,2.244552921509E-02,10.505));+#4470 = CARTESIAN_POINT('',(-1.458486231625,3.945687767284E-02,10.505));+#4471 = PCURVE('',#4435,#4472);+#4472 = DEFINITIONAL_REPRESENTATION('',(#4473),#4477);+#4473 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4474,#4475,#4476),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4474 = CARTESIAN_POINT('',(0.291083073611,0.411107587729));+#4475 = CARTESIAN_POINT('',(0.31612755884,0.411107587729));+#4476 = CARTESIAN_POINT('',(0.333138907298,0.394096239271));+#4477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4478 = ORIENTED_EDGE('',*,*,#4479,.T.);+#4479 = EDGE_CURVE('',#4464,#4480,#4482,.T.);+#4480 = VERTEX_POINT('',#4481);+#4481 = CARTESIAN_POINT('',(-1.416430397938,5.64682261306E-02,10.505));+#4482 = SURFACE_CURVE('',#4483,(#4487),.PCURVE_S1.);+#4483 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4484,#4485,#4486),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4484 = CARTESIAN_POINT('',(-1.458486231625,3.945687767284E-02,10.505));+#4485 = CARTESIAN_POINT('',(-1.441474883167,5.646822613059E-02,10.505));+#4486 = CARTESIAN_POINT('',(-1.416430397938,5.646822613059E-02,10.505));+#4487 = PCURVE('',#4435,#4488);+#4488 = DEFINITIONAL_REPRESENTATION('',(#4489),#4493);+#4489 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4490,#4491,#4492),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4490 = CARTESIAN_POINT('',(0.333138907298,0.394096239271));+#4491 = CARTESIAN_POINT('',(0.350150255756,0.377084890813));+#4492 = CARTESIAN_POINT('',(0.350150255756,0.352040405584));+#4493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4494 = ORIENTED_EDGE('',*,*,#4495,.T.);+#4495 = EDGE_CURVE('',#4480,#4496,#4498,.T.);+#4496 = VERTEX_POINT('',#4497);+#4497 = CARTESIAN_POINT('',(-1.374847101708,3.945687767284E-02,10.505));+#4498 = SURFACE_CURVE('',#4499,(#4503),.PCURVE_S1.);+#4499 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4500,#4501,#4502),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4500 = CARTESIAN_POINT('',(-1.416430397938,5.646822613059E-02,10.505));+#4501 = CARTESIAN_POINT('',(-1.391858450166,5.646822613059E-02,10.505));+#4502 = CARTESIAN_POINT('',(-1.374847101708,3.945687767284E-02,10.505));+#4503 = PCURVE('',#4435,#4504);+#4504 = DEFINITIONAL_REPRESENTATION('',(#4505),#4509);+#4505 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4506,#4507,#4508),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4506 = CARTESIAN_POINT('',(0.350150255756,0.352040405584));+#4507 = CARTESIAN_POINT('',(0.350150255756,0.327468457812));+#4508 = CARTESIAN_POINT('',(0.333138907298,0.310457109354));+#4509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4510 = ORIENTED_EDGE('',*,*,#4511,.T.);+#4511 = EDGE_CURVE('',#4496,#4512,#4514,.T.);+#4512 = VERTEX_POINT('',#4513);+#4513 = CARTESIAN_POINT('',(-1.35783575325,-2.598956014379E-03,10.505));+#4514 = SURFACE_CURVE('',#4515,(#4519),.PCURVE_S1.);+#4515 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4516,#4517,#4518),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4516 = CARTESIAN_POINT('',(-1.374847101708,3.945687767284E-02,10.505));+#4517 = CARTESIAN_POINT('',(-1.35783575325,2.244552921509E-02,10.505));+#4518 = CARTESIAN_POINT('',(-1.35783575325,-2.598956014379E-03,10.505));+#4519 = PCURVE('',#4435,#4520);+#4520 = DEFINITIONAL_REPRESENTATION('',(#4521),#4525);+#4521 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4522,#4523,#4524),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4522 = CARTESIAN_POINT('',(0.333138907298,0.310457109354));+#4523 = CARTESIAN_POINT('',(0.31612755884,0.293445760896));+#4524 = CARTESIAN_POINT('',(0.291083073611,0.293445760896));+#4525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4526 = ORIENTED_EDGE('',*,*,#4527,.T.);+#4527 = EDGE_CURVE('',#4512,#4528,#4530,.T.);+#4528 = VERTEX_POINT('',#4529);+#4529 = CARTESIAN_POINT('',(-1.374610832979,-4.418225224444E-02,10.505)+  );+#4530 = SURFACE_CURVE('',#4531,(#4535),.PCURVE_S1.);+#4531 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4532,#4533,#4534),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4532 = CARTESIAN_POINT('',(-1.35783575325,-2.598956014379E-03,10.505));+#4533 = CARTESIAN_POINT('',(-1.35783575325,-2.717090378669E-02,10.505));+#4534 = CARTESIAN_POINT('',(-1.374610832979,-4.418225224444E-02,10.505)+  );+#4535 = PCURVE('',#4435,#4536);+#4536 = DEFINITIONAL_REPRESENTATION('',(#4537),#4541);+#4537 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4538,#4539,#4540),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4538 = CARTESIAN_POINT('',(0.291083073611,0.293445760896));+#4539 = CARTESIAN_POINT('',(0.266511125838,0.293445760896));+#4540 = CARTESIAN_POINT('',(0.249499777381,0.310220840625));+#4541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4542 = ORIENTED_EDGE('',*,*,#4543,.T.);+#4543 = EDGE_CURVE('',#4528,#4425,#4544,.T.);+#4544 = SURFACE_CURVE('',#4545,(#4549),.PCURVE_S1.);+#4545 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4546,#4547,#4548),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4546 = CARTESIAN_POINT('',(-1.374610832979,-4.418225224444E-02,10.505)+  );+#4547 = CARTESIAN_POINT('',(-1.391385912708,-6.119360070219E-02,10.505)+  );+#4548 = CARTESIAN_POINT('',(-1.416430397938,-6.119360070219E-02,10.505)+  );+#4549 = PCURVE('',#4435,#4550);+#4550 = DEFINITIONAL_REPRESENTATION('',(#4551),#4555);+#4551 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4552,#4553,#4554),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4552 = CARTESIAN_POINT('',(0.249499777381,0.310220840625));+#4553 = CARTESIAN_POINT('',(0.232488428923,0.326995920354));+#4554 = CARTESIAN_POINT('',(0.232488428923,0.352040405584));+#4555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4556 = SHELL_BASED_SURFACE_MODEL('',(#4557));+#4557 = OPEN_SHELL('',(#4558));+#4558 = ADVANCED_FACE('',(#4559,#4694),#4573,.T.);+#4559 = FACE_BOUND('',#4560,.F.);+#4560 = EDGE_LOOP('',(#4561,#4584,#4600,#4616,#4632,#4648,#4664,#4680));+#4561 = ORIENTED_EDGE('',*,*,#4562,.T.);+#4562 = EDGE_CURVE('',#4563,#4565,#4567,.T.);+#4563 = VERTEX_POINT('',#4564);+#4564 = CARTESIAN_POINT('',(-1.416430397938,-0.235559922394,10.505));+#4565 = VERTEX_POINT('',#4566);+#4566 = CARTESIAN_POINT('',(-1.691210929276,-0.177437815164,10.505));+#4567 = SURFACE_CURVE('',#4568,(#4572),.PCURVE_S1.);+#4568 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4569,#4570,#4571),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4569 = CARTESIAN_POINT('',(-1.416430397938,-0.235559922394,10.505));+#4570 = CARTESIAN_POINT('',(-1.599774931316,-0.235559922394,10.505));+#4571 = CARTESIAN_POINT('',(-1.691210929276,-0.177437815164,10.505));+#4572 = PCURVE('',#4573,#4578);+#4573 = PLANE('',#4574);+#4574 = AXIS2_PLACEMENT_3D('',#4575,#4576,#4577);+#4575 = CARTESIAN_POINT('',(-1.064389992354,-0.293682029625,10.505));+#4576 = DIRECTION('',(0.,0.,1.));+#4577 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#4578 = DEFINITIONAL_REPRESENTATION('',(#4579),#4583);+#4579 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4580,#4581,#4582),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4580 = CARTESIAN_POINT('',(5.8122107231E-02,0.352040405584));+#4581 = CARTESIAN_POINT('',(5.8122107231E-02,0.535384938962));+#4582 = CARTESIAN_POINT('',(0.116244214461,0.626820936922));+#4583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4584 = ORIENTED_EDGE('',*,*,#4585,.T.);+#4585 = EDGE_CURVE('',#4565,#4586,#4588,.T.);+#4586 = VERTEX_POINT('',#4587);+#4587 = CARTESIAN_POINT('',(-1.782646927237,-2.598956014379E-03,10.505)+  );+#4588 = SURFACE_CURVE('',#4589,(#4593),.PCURVE_S1.);+#4589 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4590,#4591,#4592),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4590 = CARTESIAN_POINT('',(-1.691210929276,-0.177437815164,10.505));+#4591 = CARTESIAN_POINT('',(-1.782646927237,-0.119315707933,10.505));+#4592 = CARTESIAN_POINT('',(-1.782646927237,-2.598956014379E-03,10.505)+  );+#4593 = PCURVE('',#4573,#4594);+#4594 = DEFINITIONAL_REPRESENTATION('',(#4595),#4599);+#4595 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4596,#4597,#4598),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4596 = CARTESIAN_POINT('',(0.116244214461,0.626820936922));+#4597 = CARTESIAN_POINT('',(0.174366321692,0.718256934883));+#4598 = CARTESIAN_POINT('',(0.291083073611,0.718256934883));+#4599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4600 = ORIENTED_EDGE('',*,*,#4601,.T.);+#4601 = EDGE_CURVE('',#4586,#4602,#4604,.T.);+#4602 = VERTEX_POINT('',#4603);+#4603 = CARTESIAN_POINT('',(-1.691447198005,0.172712440592,10.505));+#4604 = SURFACE_CURVE('',#4605,(#4609),.PCURVE_S1.);+#4605 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4606,#4607,#4608),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4606 = CARTESIAN_POINT('',(-1.782646927237,-2.598956014379E-03,10.505)+  );+#4607 = CARTESIAN_POINT('',(-1.782646927237,0.114590333361,10.505));+#4608 = CARTESIAN_POINT('',(-1.691447198005,0.172712440592,10.505));+#4609 = PCURVE('',#4573,#4610);+#4610 = DEFINITIONAL_REPRESENTATION('',(#4611),#4615);+#4611 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4612,#4613,#4614),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4612 = CARTESIAN_POINT('',(0.291083073611,0.718256934883));+#4613 = CARTESIAN_POINT('',(0.408272362986,0.718256934883));+#4614 = CARTESIAN_POINT('',(0.466394470217,0.627057205651));+#4615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4616 = ORIENTED_EDGE('',*,*,#4617,.T.);+#4617 = EDGE_CURVE('',#4602,#4618,#4620,.T.);+#4618 = VERTEX_POINT('',#4619);+#4619 = CARTESIAN_POINT('',(-1.416430397938,0.230834547823,10.505));+#4620 = SURFACE_CURVE('',#4621,(#4625),.PCURVE_S1.);+#4621 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4622,#4623,#4624),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4622 = CARTESIAN_POINT('',(-1.691447198005,0.172712440592,10.505));+#4623 = CARTESIAN_POINT('',(-1.600247468773,0.230834547823,10.505));+#4624 = CARTESIAN_POINT('',(-1.416430397938,0.230834547823,10.505));+#4625 = PCURVE('',#4573,#4626);+#4626 = DEFINITIONAL_REPRESENTATION('',(#4627),#4631);+#4627 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4628,#4629,#4630),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4628 = CARTESIAN_POINT('',(0.466394470217,0.627057205651));+#4629 = CARTESIAN_POINT('',(0.524516577448,0.535857476419));+#4630 = CARTESIAN_POINT('',(0.524516577448,0.352040405584));+#4631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4632 = ORIENTED_EDGE('',*,*,#4633,.T.);+#4633 = EDGE_CURVE('',#4618,#4634,#4636,.T.);+#4634 = VERTEX_POINT('',#4635);+#4635 = CARTESIAN_POINT('',(-1.141886135328,0.172712440592,10.505));+#4636 = SURFACE_CURVE('',#4637,(#4641),.PCURVE_S1.);+#4637 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4638,#4639,#4640),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4638 = CARTESIAN_POINT('',(-1.416430397938,0.230834547823,10.505));+#4639 = CARTESIAN_POINT('',(-1.23308586456,0.230834547823,10.505));+#4640 = CARTESIAN_POINT('',(-1.141886135328,0.172712440592,10.505));+#4641 = PCURVE('',#4573,#4642);+#4642 = DEFINITIONAL_REPRESENTATION('',(#4643),#4647);+#4643 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4644,#4645,#4646),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4644 = CARTESIAN_POINT('',(0.524516577448,0.352040405584));+#4645 = CARTESIAN_POINT('',(0.524516577448,0.168695872206));+#4646 = CARTESIAN_POINT('',(0.466394470217,7.7496142974E-02));+#4647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4648 = ORIENTED_EDGE('',*,*,#4649,.T.);+#4649 = EDGE_CURVE('',#4634,#4650,#4652,.T.);+#4650 = VERTEX_POINT('',#4651);+#4651 = CARTESIAN_POINT('',(-1.050686406096,-2.598956014379E-03,10.505)+  );+#4652 = SURFACE_CURVE('',#4653,(#4657),.PCURVE_S1.);+#4653 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4654,#4655,#4656),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4654 = CARTESIAN_POINT('',(-1.141886135328,0.172712440592,10.505));+#4655 = CARTESIAN_POINT('',(-1.050686406096,0.114590333361,10.505));+#4656 = CARTESIAN_POINT('',(-1.050686406096,-2.598956014379E-03,10.505)+  );+#4657 = PCURVE('',#4573,#4658);+#4658 = DEFINITIONAL_REPRESENTATION('',(#4659),#4663);+#4659 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4660,#4661,#4662),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4660 = CARTESIAN_POINT('',(0.466394470217,7.7496142974E-02));+#4661 = CARTESIAN_POINT('',(0.408272362986,-1.3703586258E-02));+#4662 = CARTESIAN_POINT('',(0.291083073611,-1.3703586258E-02));+#4663 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4664 = ORIENTED_EDGE('',*,*,#4665,.T.);+#4665 = EDGE_CURVE('',#4650,#4666,#4668,.T.);+#4666 = VERTEX_POINT('',#4667);+#4667 = CARTESIAN_POINT('',(-1.142122404057,-0.177437815164,10.505));+#4668 = SURFACE_CURVE('',#4669,(#4673),.PCURVE_S1.);+#4669 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4670,#4671,#4672),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4670 = CARTESIAN_POINT('',(-1.050686406096,-2.598956014379E-03,10.505)+  );+#4671 = CARTESIAN_POINT('',(-1.050686406096,-0.119315707933,10.505));+#4672 = CARTESIAN_POINT('',(-1.142122404057,-0.177437815164,10.505));+#4673 = PCURVE('',#4573,#4674);+#4674 = DEFINITIONAL_REPRESENTATION('',(#4675),#4679);+#4675 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4676,#4677,#4678),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4676 = CARTESIAN_POINT('',(0.291083073611,-1.3703586258E-02));+#4677 = CARTESIAN_POINT('',(0.174366321692,-1.3703586258E-02));+#4678 = CARTESIAN_POINT('',(0.116244214461,7.7732411703E-02));+#4679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4680 = ORIENTED_EDGE('',*,*,#4681,.T.);+#4681 = EDGE_CURVE('',#4666,#4563,#4682,.T.);+#4682 = SURFACE_CURVE('',#4683,(#4687),.PCURVE_S1.);+#4683 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4684,#4685,#4686),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4684 = CARTESIAN_POINT('',(-1.142122404057,-0.177437815164,10.505));+#4685 = CARTESIAN_POINT('',(-1.233558402017,-0.235559922394,10.505));+#4686 = CARTESIAN_POINT('',(-1.416430397938,-0.235559922394,10.505));+#4687 = PCURVE('',#4573,#4688);+#4688 = DEFINITIONAL_REPRESENTATION('',(#4689),#4693);+#4689 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4690,#4691,#4692),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4690 = CARTESIAN_POINT('',(0.116244214461,7.7732411703E-02));+#4691 = CARTESIAN_POINT('',(5.8122107231E-02,0.169168409663));+#4692 = CARTESIAN_POINT('',(5.8122107231E-02,0.352040405584));+#4693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4694 = FACE_BOUND('',#4695,.F.);+#4695 = EDGE_LOOP('',(#4696,#4714,#4730,#4746,#4762,#4778,#4794,#4810));+#4696 = ORIENTED_EDGE('',*,*,#4697,.T.);+#4697 = EDGE_CURVE('',#4698,#4700,#4702,.T.);+#4698 = VERTEX_POINT('',#4699);+#4699 = CARTESIAN_POINT('',(-1.664512562947,-2.598956014379E-03,10.505)+  );+#4700 = VERTEX_POINT('',#4701);+#4701 = CARTESIAN_POINT('',(-1.605445380802,-7.300703713119E-02,10.505)+  );+#4702 = SURFACE_CURVE('',#4703,(#4707),.PCURVE_S1.);+#4703 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4704,#4705,#4706),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4704 = CARTESIAN_POINT('',(-1.664512562947,-2.598956014379E-03,10.505)+  );+#4705 = CARTESIAN_POINT('',(-1.664512562947,-5.079777664468E-02,10.505)+  );+#4706 = CARTESIAN_POINT('',(-1.605445380802,-7.300703713119E-02,10.505)+  );+#4707 = PCURVE('',#4573,#4708);+#4708 = DEFINITIONAL_REPRESENTATION('',(#4709),#4713);+#4709 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4710,#4711,#4712),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4710 = CARTESIAN_POINT('',(0.291083073611,0.600122570593));+#4711 = CARTESIAN_POINT('',(0.24288425298,0.600122570593));+#4712 = CARTESIAN_POINT('',(0.220674992494,0.541055388448));+#4713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4714 = ORIENTED_EDGE('',*,*,#4715,.T.);+#4715 = EDGE_CURVE('',#4700,#4716,#4718,.T.);+#4716 = VERTEX_POINT('',#4717);+#4717 = CARTESIAN_POINT('',(-1.416430397938,-9.52162976177E-02,10.505));+#4718 = SURFACE_CURVE('',#4719,(#4723),.PCURVE_S1.);+#4719 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4720,#4721,#4722),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4720 = CARTESIAN_POINT('',(-1.605445380802,-7.300703713119E-02,10.505)+  );+#4721 = CARTESIAN_POINT('',(-1.546378198657,-9.52162976177E-02,10.505));+#4722 = CARTESIAN_POINT('',(-1.416430397938,-9.52162976177E-02,10.505));+#4723 = PCURVE('',#4573,#4724);+#4724 = DEFINITIONAL_REPRESENTATION('',(#4725),#4729);+#4725 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4726,#4727,#4728),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4726 = CARTESIAN_POINT('',(0.220674992494,0.541055388448));+#4727 = CARTESIAN_POINT('',(0.198465732007,0.481988206303));+#4728 = CARTESIAN_POINT('',(0.198465732007,0.352040405584));+#4729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4730 = ORIENTED_EDGE('',*,*,#4731,.T.);+#4731 = EDGE_CURVE('',#4716,#4732,#4734,.T.);+#4732 = VERTEX_POINT('',#4733);+#4733 = CARTESIAN_POINT('',(-1.227887952531,-7.300703713119E-02,10.505)+  );+#4734 = SURFACE_CURVE('',#4735,(#4739),.PCURVE_S1.);+#4735 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4736,#4737,#4738),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4736 = CARTESIAN_POINT('',(-1.416430397938,-9.52162976177E-02,10.505));+#4737 = CARTESIAN_POINT('',(-1.286955134676,-9.52162976177E-02,10.505));+#4738 = CARTESIAN_POINT('',(-1.227887952531,-7.300703713119E-02,10.505)+  );+#4739 = PCURVE('',#4573,#4740);+#4740 = DEFINITIONAL_REPRESENTATION('',(#4741),#4745);+#4741 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4742,#4743,#4744),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4742 = CARTESIAN_POINT('',(0.198465732007,0.352040405584));+#4743 = CARTESIAN_POINT('',(0.198465732007,0.222565142322));+#4744 = CARTESIAN_POINT('',(0.220674992494,0.163497960177));+#4745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4746 = ORIENTED_EDGE('',*,*,#4747,.T.);+#4747 = EDGE_CURVE('',#4732,#4748,#4750,.T.);+#4748 = VERTEX_POINT('',#4749);+#4749 = CARTESIAN_POINT('',(-1.168820770386,-2.598956014379E-03,10.505)+  );+#4750 = SURFACE_CURVE('',#4751,(#4755),.PCURVE_S1.);+#4751 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4752,#4753,#4754),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4752 = CARTESIAN_POINT('',(-1.227887952531,-7.300703713119E-02,10.505)+  );+#4753 = CARTESIAN_POINT('',(-1.168820770386,-5.079777664468E-02,10.505)+  );+#4754 = CARTESIAN_POINT('',(-1.168820770386,-2.598956014379E-03,10.505)+  );+#4755 = PCURVE('',#4573,#4756);+#4756 = DEFINITIONAL_REPRESENTATION('',(#4757),#4761);+#4757 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4758,#4759,#4760),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4758 = CARTESIAN_POINT('',(0.220674992494,0.163497960177));+#4759 = CARTESIAN_POINT('',(0.24288425298,0.104430778032));+#4760 = CARTESIAN_POINT('',(0.291083073611,0.104430778032));+#4761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4762 = ORIENTED_EDGE('',*,*,#4763,.T.);+#4763 = EDGE_CURVE('',#4748,#4764,#4766,.T.);+#4764 = VERTEX_POINT('',#4765);+#4765 = CARTESIAN_POINT('',(-1.227887952531,6.828166255959E-02,10.505));+#4766 = SURFACE_CURVE('',#4767,(#4771),.PCURVE_S1.);+#4767 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4768,#4769,#4770),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4768 = CARTESIAN_POINT('',(-1.168820770386,-2.598956014379E-03,10.505)+  );+#4769 = CARTESIAN_POINT('',(-1.168820770386,4.607240207308E-02,10.505));+#4770 = CARTESIAN_POINT('',(-1.227887952531,6.828166255959E-02,10.505));+#4771 = PCURVE('',#4573,#4772);+#4772 = DEFINITIONAL_REPRESENTATION('',(#4773),#4777);+#4773 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4774,#4775,#4776),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4774 = CARTESIAN_POINT('',(0.291083073611,0.104430778032));+#4775 = CARTESIAN_POINT('',(0.339754431698,0.104430778032));+#4776 = CARTESIAN_POINT('',(0.361963692185,0.163497960177));+#4777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4778 = ORIENTED_EDGE('',*,*,#4779,.T.);+#4779 = EDGE_CURVE('',#4764,#4780,#4782,.T.);+#4780 = VERTEX_POINT('',#4781);+#4781 = CARTESIAN_POINT('',(-1.416430397938,9.04909230461E-02,10.505));+#4782 = SURFACE_CURVE('',#4783,(#4787),.PCURVE_S1.);+#4783 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4784,#4785,#4786),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4784 = CARTESIAN_POINT('',(-1.227887952531,6.828166255959E-02,10.505));+#4785 = CARTESIAN_POINT('',(-1.286955134676,9.04909230461E-02,10.505));+#4786 = CARTESIAN_POINT('',(-1.416430397938,9.04909230461E-02,10.505));+#4787 = PCURVE('',#4573,#4788);+#4788 = DEFINITIONAL_REPRESENTATION('',(#4789),#4793);+#4789 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4790,#4791,#4792),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4790 = CARTESIAN_POINT('',(0.361963692185,0.163497960177));+#4791 = CARTESIAN_POINT('',(0.384172952671,0.222565142322));+#4792 = CARTESIAN_POINT('',(0.384172952671,0.352040405584));+#4793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4794 = ORIENTED_EDGE('',*,*,#4795,.T.);+#4795 = EDGE_CURVE('',#4780,#4796,#4798,.T.);+#4796 = VERTEX_POINT('',#4797);+#4797 = CARTESIAN_POINT('',(-1.605445380802,6.828166255959E-02,10.505));+#4798 = SURFACE_CURVE('',#4799,(#4803),.PCURVE_S1.);+#4799 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4800,#4801,#4802),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4800 = CARTESIAN_POINT('',(-1.416430397938,9.04909230461E-02,10.505));+#4801 = CARTESIAN_POINT('',(-1.546378198657,9.04909230461E-02,10.505));+#4802 = CARTESIAN_POINT('',(-1.605445380802,6.828166255959E-02,10.505));+#4803 = PCURVE('',#4573,#4804);+#4804 = DEFINITIONAL_REPRESENTATION('',(#4805),#4809);+#4805 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4806,#4807,#4808),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4806 = CARTESIAN_POINT('',(0.384172952671,0.352040405584));+#4807 = CARTESIAN_POINT('',(0.384172952671,0.481988206303));+#4808 = CARTESIAN_POINT('',(0.361963692185,0.541055388448));+#4809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4810 = ORIENTED_EDGE('',*,*,#4811,.T.);+#4811 = EDGE_CURVE('',#4796,#4698,#4812,.T.);+#4812 = SURFACE_CURVE('',#4813,(#4817),.PCURVE_S1.);+#4813 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4814,#4815,#4816),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4814 = CARTESIAN_POINT('',(-1.605445380802,6.828166255959E-02,10.505));+#4815 = CARTESIAN_POINT('',(-1.664512562947,4.607240207308E-02,10.505));+#4816 = CARTESIAN_POINT('',(-1.664512562947,-2.598956014379E-03,10.505)+  );+#4817 = PCURVE('',#4573,#4818);+#4818 = DEFINITIONAL_REPRESENTATION('',(#4819),#4823);+#4819 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4820,#4821,#4822),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4820 = CARTESIAN_POINT('',(0.361963692185,0.541055388448));+#4821 = CARTESIAN_POINT('',(0.339754431698,0.600122570593));+#4822 = CARTESIAN_POINT('',(0.291083073611,0.600122570593));+#4823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4824 = SHELL_BASED_SURFACE_MODEL('',(#4825));+#4825 = OPEN_SHELL('',(#4826));+#4826 = ADVANCED_FACE('',(#4827),#4841,.T.);+#4827 = FACE_BOUND('',#4828,.F.);+#4828 = EDGE_LOOP('',(#4829,#4852,#4868,#4884,#4900,#4916,#4932,#4948,+    #4964,#4980,#4996));+#4829 = ORIENTED_EDGE('',*,*,#4830,.T.);+#4830 = EDGE_CURVE('',#4831,#4833,#4835,.T.);+#4831 = VERTEX_POINT('',#4832);+#4832 = CARTESIAN_POINT('',(-1.064389992354,0.377793696999,10.505));+#4833 = VERTEX_POINT('',#4834);+#4834 = CARTESIAN_POINT('',(-1.187249731215,0.377793696999,10.505));+#4835 = SURFACE_CURVE('',#4836,(#4840),.PCURVE_S1.);+#4836 = LINE('',#4837,#4838);+#4837 = CARTESIAN_POINT('',(-1.064389992354,0.377793696999,10.505));+#4838 = VECTOR('',#4839,1.);+#4839 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4840 = PCURVE('',#4841,#4846);+#4841 = PLANE('',#4842);+#4842 = AXIS2_PLACEMENT_3D('',#4843,#4844,#4845);+#4843 = CARTESIAN_POINT('',(-1.064389992354,0.288956655053,10.505));+#4844 = DIRECTION('',(0.,0.,1.));+#4845 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#4846 = DEFINITIONAL_REPRESENTATION('',(#4847),#4851);+#4847 = LINE('',#4848,#4849);+#4848 = CARTESIAN_POINT('',(8.8837041946E-02,9.862892940803E-18));+#4849 = VECTOR('',#4850,1.);+#4850 = DIRECTION('',(0.,1.));+#4851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4852 = ORIENTED_EDGE('',*,*,#4853,.T.);+#4853 = EDGE_CURVE('',#4833,#4854,#4856,.T.);+#4854 = VERTEX_POINT('',#4855);+#4855 = CARTESIAN_POINT('',(-1.187249731215,0.533731057862,10.505));+#4856 = SURFACE_CURVE('',#4857,(#4861),.PCURVE_S1.);+#4857 = LINE('',#4858,#4859);+#4858 = CARTESIAN_POINT('',(-1.187249731215,0.377793696999,10.505));+#4859 = VECTOR('',#4860,1.);+#4860 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4861 = PCURVE('',#4841,#4862);+#4862 = DEFINITIONAL_REPRESENTATION('',(#4863),#4867);+#4863 = LINE('',#4864,#4865);+#4864 = CARTESIAN_POINT('',(8.8837041946E-02,0.122859738861));+#4865 = VECTOR('',#4866,1.);+#4866 = DIRECTION('',(1.,0.));+#4867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4868 = ORIENTED_EDGE('',*,*,#4869,.T.);+#4869 = EDGE_CURVE('',#4854,#4870,#4872,.T.);+#4870 = VERTEX_POINT('',#4871);+#4871 = CARTESIAN_POINT('',(-1.645138527203,0.533731057862,10.505));+#4872 = SURFACE_CURVE('',#4873,(#4877),.PCURVE_S1.);+#4873 = LINE('',#4874,#4875);+#4874 = CARTESIAN_POINT('',(-1.187249731215,0.533731057862,10.505));+#4875 = VECTOR('',#4876,1.);+#4876 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4877 = PCURVE('',#4841,#4878);+#4878 = DEFINITIONAL_REPRESENTATION('',(#4879),#4883);+#4879 = LINE('',#4880,#4881);+#4880 = CARTESIAN_POINT('',(0.244774402809,0.122859738861));+#4881 = VECTOR('',#4882,1.);+#4882 = DIRECTION('',(0.,1.));+#4883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4884 = ORIENTED_EDGE('',*,*,#4885,.T.);+#4885 = EDGE_CURVE('',#4870,#4886,#4888,.T.);+#4886 = VERTEX_POINT('',#4887);+#4887 = CARTESIAN_POINT('',(-1.609225680459,0.388662058514,10.505));+#4888 = SURFACE_CURVE('',#4889,(#4893),.PCURVE_S1.);+#4889 = LINE('',#4890,#4891);+#4890 = CARTESIAN_POINT('',(-1.645138527203,0.533731057862,10.505));+#4891 = VECTOR('',#4892,1.);+#4892 = DIRECTION('',(0.240303066167,-0.970697912015,0.));+#4893 = PCURVE('',#4841,#4894);+#4894 = DEFINITIONAL_REPRESENTATION('',(#4895),#4899);+#4895 = LINE('',#4896,#4897);+#4896 = CARTESIAN_POINT('',(0.244774402809,0.580748534849));+#4897 = VECTOR('',#4898,1.);+#4898 = DIRECTION('',(-0.970697912015,-0.240303066167));+#4899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4900 = ORIENTED_EDGE('',*,*,#4901,.T.);+#4901 = EDGE_CURVE('',#4886,#4902,#4904,.T.);+#4902 = VERTEX_POINT('',#4903);+#4903 = CARTESIAN_POINT('',(-1.734920644064,0.388662058514,10.505));+#4904 = SURFACE_CURVE('',#4905,(#4909),.PCURVE_S1.);+#4905 = LINE('',#4906,#4907);+#4906 = CARTESIAN_POINT('',(-1.609225680459,0.388662058514,10.505));+#4907 = VECTOR('',#4908,1.);+#4908 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#4909 = PCURVE('',#4841,#4910);+#4910 = DEFINITIONAL_REPRESENTATION('',(#4911),#4915);+#4911 = LINE('',#4912,#4913);+#4912 = CARTESIAN_POINT('',(9.9705403461E-02,0.544835688105));+#4913 = VECTOR('',#4914,1.);+#4914 = DIRECTION('',(0.,1.));+#4915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4916 = ORIENTED_EDGE('',*,*,#4917,.T.);+#4917 = EDGE_CURVE('',#4902,#4918,#4920,.T.);+#4918 = VERTEX_POINT('',#4919);+#4919 = CARTESIAN_POINT('',(-1.769888415893,0.534676132776,10.505));+#4920 = SURFACE_CURVE('',#4921,(#4925),.PCURVE_S1.);+#4921 = LINE('',#4922,#4923);+#4922 = CARTESIAN_POINT('',(-1.734920644064,0.388662058514,10.505));+#4923 = VECTOR('',#4924,1.);+#4924 = DIRECTION('',(-0.232896789262,0.972501457866,0.));+#4925 = PCURVE('',#4841,#4926);+#4926 = DEFINITIONAL_REPRESENTATION('',(#4927),#4931);+#4927 = LINE('',#4928,#4929);+#4928 = CARTESIAN_POINT('',(9.9705403461E-02,0.67053065171));+#4929 = VECTOR('',#4930,1.);+#4930 = DIRECTION('',(0.972501457866,0.232896789262));+#4931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4932 = ORIENTED_EDGE('',*,*,#4933,.T.);+#4933 = EDGE_CURVE('',#4918,#4934,#4936,.T.);+#4934 = VERTEX_POINT('',#4935);+#4935 = CARTESIAN_POINT('',(-1.769888415893,0.669349308067,10.505));+#4936 = SURFACE_CURVE('',#4937,(#4941),.PCURVE_S1.);+#4937 = LINE('',#4938,#4939);+#4938 = CARTESIAN_POINT('',(-1.769888415893,0.534676132776,10.505));+#4939 = VECTOR('',#4940,1.);+#4940 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4941 = PCURVE('',#4841,#4942);+#4942 = DEFINITIONAL_REPRESENTATION('',(#4943),#4947);+#4943 = LINE('',#4944,#4945);+#4944 = CARTESIAN_POINT('',(0.245719477723,0.705498423539));+#4945 = VECTOR('',#4946,1.);+#4946 = DIRECTION('',(1.,0.));+#4947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4948 = ORIENTED_EDGE('',*,*,#4949,.T.);+#4949 = EDGE_CURVE('',#4934,#4950,#4952,.T.);+#4950 = VERTEX_POINT('',#4951);+#4951 = CARTESIAN_POINT('',(-1.187249731215,0.669349308067,10.505));+#4952 = SURFACE_CURVE('',#4953,(#4957),.PCURVE_S1.);+#4953 = LINE('',#4954,#4955);+#4954 = CARTESIAN_POINT('',(-1.769888415893,0.669349308067,10.505));+#4955 = VECTOR('',#4956,1.);+#4956 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4957 = PCURVE('',#4841,#4958);+#4958 = DEFINITIONAL_REPRESENTATION('',(#4959),#4963);+#4959 = LINE('',#4960,#4961);+#4960 = CARTESIAN_POINT('',(0.380392653014,0.705498423539));+#4961 = VECTOR('',#4962,1.);+#4962 = DIRECTION('',(0.,-1.));+#4963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4964 = ORIENTED_EDGE('',*,*,#4965,.T.);+#4965 = EDGE_CURVE('',#4950,#4966,#4968,.T.);+#4966 = VERTEX_POINT('',#4967);+#4967 = CARTESIAN_POINT('',(-1.187249731215,0.82528666893,10.505));+#4968 = SURFACE_CURVE('',#4969,(#4973),.PCURVE_S1.);+#4969 = LINE('',#4970,#4971);+#4970 = CARTESIAN_POINT('',(-1.187249731215,0.669349308067,10.505));+#4971 = VECTOR('',#4972,1.);+#4972 = DIRECTION('',(1.110223024625E-16,1.,0.));+#4973 = PCURVE('',#4841,#4974);+#4974 = DEFINITIONAL_REPRESENTATION('',(#4975),#4979);+#4975 = LINE('',#4976,#4977);+#4976 = CARTESIAN_POINT('',(0.380392653014,0.122859738861));+#4977 = VECTOR('',#4978,1.);+#4978 = DIRECTION('',(1.,0.));+#4979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4980 = ORIENTED_EDGE('',*,*,#4981,.T.);+#4981 = EDGE_CURVE('',#4966,#4982,#4984,.T.);+#4982 = VERTEX_POINT('',#4983);+#4983 = CARTESIAN_POINT('',(-1.064389992354,0.82528666893,10.505));+#4984 = SURFACE_CURVE('',#4985,(#4989),.PCURVE_S1.);+#4985 = LINE('',#4986,#4987);+#4986 = CARTESIAN_POINT('',(-1.187249731215,0.82528666893,10.505));+#4987 = VECTOR('',#4988,1.);+#4988 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#4989 = PCURVE('',#4841,#4990);+#4990 = DEFINITIONAL_REPRESENTATION('',(#4991),#4995);+#4991 = LINE('',#4992,#4993);+#4992 = CARTESIAN_POINT('',(0.536330013877,0.122859738861));+#4993 = VECTOR('',#4994,1.);+#4994 = DIRECTION('',(0.,-1.));+#4995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#4996 = ORIENTED_EDGE('',*,*,#4997,.T.);+#4997 = EDGE_CURVE('',#4982,#4831,#4998,.T.);+#4998 = SURFACE_CURVE('',#4999,(#5003),.PCURVE_S1.);+#4999 = LINE('',#5000,#5001);+#5000 = CARTESIAN_POINT('',(-1.064389992354,0.82528666893,10.505));+#5001 = VECTOR('',#5002,1.);+#5002 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5003 = PCURVE('',#4841,#5004);+#5004 = DEFINITIONAL_REPRESENTATION('',(#5005),#5009);+#5005 = LINE('',#5006,#5007);+#5006 = CARTESIAN_POINT('',(0.536330013877,5.954459302037E-17));+#5007 = VECTOR('',#5008,1.);+#5008 = DIRECTION('',(-1.,0.));+#5009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5010 = SHELL_BASED_SURFACE_MODEL('',(#5011));+#5011 = OPEN_SHELL('',(#5012));+#5012 = ADVANCED_FACE('',(#5013),#5027,.T.);+#5013 = FACE_BOUND('',#5014,.F.);+#5014 = EDGE_LOOP('',(#5015,#5038,#5054,#5070,#5086,#5102,#5118,#5134,+    #5150,#5166,#5182,#5198,#5214));+#5015 = ORIENTED_EDGE('',*,*,#5016,.T.);+#5016 = EDGE_CURVE('',#5017,#5019,#5021,.T.);+#5017 = VERTEX_POINT('',#5018);+#5018 = CARTESIAN_POINT('',(-1.064389992354,0.912233561047,10.505));+#5019 = VERTEX_POINT('',#5020);+#5020 = CARTESIAN_POINT('',(-1.769888415893,0.912233561047,10.505));+#5021 = SURFACE_CURVE('',#5022,(#5026),.PCURVE_S1.);+#5022 = LINE('',#5023,#5024);+#5023 = CARTESIAN_POINT('',(-1.064389992354,0.912233561047,10.505));+#5024 = VECTOR('',#5025,1.);+#5025 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5026 = PCURVE('',#5027,#5032);+#5027 = PLANE('',#5028);+#5028 = AXIS2_PLACEMENT_3D('',#5029,#5030,#5031);+#5029 = CARTESIAN_POINT('',(-1.064389992354,0.871595339731,10.505));+#5030 = DIRECTION('',(0.,0.,1.));+#5031 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#5032 = DEFINITIONAL_REPRESENTATION('',(#5033),#5037);+#5033 = LINE('',#5034,#5035);+#5034 = CARTESIAN_POINT('',(4.0638221316E-02,4.511748898483E-18));+#5035 = VECTOR('',#5036,1.);+#5036 = DIRECTION('',(0.,1.));+#5037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5038 = ORIENTED_EDGE('',*,*,#5039,.T.);+#5039 = EDGE_CURVE('',#5019,#5040,#5042,.T.);+#5040 = VERTEX_POINT('',#5041);+#5041 = CARTESIAN_POINT('',(-1.769888415893,1.078566745967,10.505));+#5042 = SURFACE_CURVE('',#5043,(#5047),.PCURVE_S1.);+#5043 = LINE('',#5044,#5045);+#5044 = CARTESIAN_POINT('',(-1.769888415893,0.912233561047,10.505));+#5045 = VECTOR('',#5046,1.);+#5046 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5047 = PCURVE('',#5027,#5048);+#5048 = DEFINITIONAL_REPRESENTATION('',(#5049),#5053);+#5049 = LINE('',#5050,#5051);+#5050 = CARTESIAN_POINT('',(4.0638221316E-02,0.705498423539));+#5051 = VECTOR('',#5052,1.);+#5052 = DIRECTION('',(1.,0.));+#5053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5054 = ORIENTED_EDGE('',*,*,#5055,.T.);+#5055 = EDGE_CURVE('',#5040,#5056,#5058,.T.);+#5056 = VERTEX_POINT('',#5057);+#5057 = CARTESIAN_POINT('',(-1.460376381454,1.162678413342,10.505));+#5058 = SURFACE_CURVE('',#5059,(#5063),.PCURVE_S1.);+#5059 = LINE('',#5060,#5061);+#5060 = CARTESIAN_POINT('',(-1.769888415893,1.078566745967,10.505));+#5061 = VECTOR('',#5062,1.);+#5062 = DIRECTION('',(0.965001418712,0.262244660352,0.));+#5063 = PCURVE('',#5027,#5064);+#5064 = DEFINITIONAL_REPRESENTATION('',(#5065),#5069);+#5065 = LINE('',#5066,#5067);+#5066 = CARTESIAN_POINT('',(0.206971406236,0.705498423539));+#5067 = VECTOR('',#5068,1.);+#5068 = DIRECTION('',(0.262244660352,-0.965001418712));+#5069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5070 = ORIENTED_EDGE('',*,*,#5071,.T.);+#5071 = EDGE_CURVE('',#5056,#5072,#5074,.T.);+#5072 = VERTEX_POINT('',#5073);+#5073 = CARTESIAN_POINT('',(-1.769888415893,1.246317543259,10.505));+#5074 = SURFACE_CURVE('',#5075,(#5079),.PCURVE_S1.);+#5075 = LINE('',#5076,#5077);+#5076 = CARTESIAN_POINT('',(-1.460376381454,1.162678413342,10.505));+#5077 = VECTOR('',#5078,1.);+#5078 = DIRECTION('',(-0.965373425347,0.260871902728,0.));+#5079 = PCURVE('',#5027,#5080);+#5080 = DEFINITIONAL_REPRESENTATION('',(#5081),#5085);+#5081 = LINE('',#5082,#5083);+#5082 = CARTESIAN_POINT('',(0.291083073611,0.3959863891));+#5083 = VECTOR('',#5084,1.);+#5084 = DIRECTION('',(0.260871902728,0.965373425347));+#5085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5086 = ORIENTED_EDGE('',*,*,#5087,.T.);+#5087 = EDGE_CURVE('',#5072,#5088,#5090,.T.);+#5088 = VERTEX_POINT('',#5089);+#5089 = CARTESIAN_POINT('',(-1.769888415893,1.413595803094,10.505));+#5090 = SURFACE_CURVE('',#5091,(#5095),.PCURVE_S1.);+#5091 = LINE('',#5092,#5093);+#5092 = CARTESIAN_POINT('',(-1.769888415893,1.246317543259,10.505));+#5093 = VECTOR('',#5094,1.);+#5094 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5095 = PCURVE('',#5027,#5096);+#5096 = DEFINITIONAL_REPRESENTATION('',(#5097),#5101);+#5097 = LINE('',#5098,#5099);+#5098 = CARTESIAN_POINT('',(0.374722203528,0.705498423539));+#5099 = VECTOR('',#5100,1.);+#5100 = DIRECTION('',(1.,0.));+#5101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5102 = ORIENTED_EDGE('',*,*,#5103,.T.);+#5103 = EDGE_CURVE('',#5088,#5104,#5106,.T.);+#5104 = VERTEX_POINT('',#5105);+#5105 = CARTESIAN_POINT('',(-1.064389992354,1.413595803094,10.505));+#5106 = SURFACE_CURVE('',#5107,(#5111),.PCURVE_S1.);+#5107 = LINE('',#5108,#5109);+#5108 = CARTESIAN_POINT('',(-1.769888415893,1.413595803094,10.505));+#5109 = VECTOR('',#5110,1.);+#5110 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5111 = PCURVE('',#5027,#5112);+#5112 = DEFINITIONAL_REPRESENTATION('',(#5113),#5117);+#5113 = LINE('',#5114,#5115);+#5114 = CARTESIAN_POINT('',(0.542000463363,0.705498423539));+#5115 = VECTOR('',#5116,1.);+#5116 = DIRECTION('',(0.,-1.));+#5117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5118 = ORIENTED_EDGE('',*,*,#5119,.T.);+#5119 = EDGE_CURVE('',#5104,#5120,#5122,.T.);+#5120 = VERTEX_POINT('',#5121);+#5121 = CARTESIAN_POINT('',(-1.064389992354,1.293571288975,10.505));+#5122 = SURFACE_CURVE('',#5123,(#5127),.PCURVE_S1.);+#5123 = LINE('',#5124,#5125);+#5124 = CARTESIAN_POINT('',(-1.064389992354,1.413595803094,10.505));+#5125 = VECTOR('',#5126,1.);+#5126 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5127 = PCURVE('',#5027,#5128);+#5128 = DEFINITIONAL_REPRESENTATION('',(#5129),#5133);+#5129 = LINE('',#5130,#5131);+#5130 = CARTESIAN_POINT('',(0.542000463363,6.01741393783E-17));+#5131 = VECTOR('',#5132,1.);+#5132 = DIRECTION('',(-1.,0.));+#5133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5134 = ORIENTED_EDGE('',*,*,#5135,.T.);+#5135 = EDGE_CURVE('',#5120,#5136,#5138,.T.);+#5136 = VERTEX_POINT('',#5137);+#5137 = CARTESIAN_POINT('',(-1.629544791117,1.293571288975,10.505));+#5138 = SURFACE_CURVE('',#5139,(#5143),.PCURVE_S1.);+#5139 = LINE('',#5140,#5141);+#5140 = CARTESIAN_POINT('',(-1.064389992354,1.293571288975,10.505));+#5141 = VECTOR('',#5142,1.);+#5142 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5143 = PCURVE('',#5027,#5144);+#5144 = DEFINITIONAL_REPRESENTATION('',(#5145),#5149);+#5145 = LINE('',#5146,#5147);+#5146 = CARTESIAN_POINT('',(0.421975949244,4.684874146887E-17));+#5147 = VECTOR('',#5148,1.);+#5148 = DIRECTION('',(0.,1.));+#5149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5150 = ORIENTED_EDGE('',*,*,#5151,.T.);+#5151 = EDGE_CURVE('',#5136,#5152,#5154,.T.);+#5152 = VERTEX_POINT('',#5153);+#5153 = CARTESIAN_POINT('',(-1.320977831592,1.218910370744,10.505));+#5154 = SURFACE_CURVE('',#5155,(#5159),.PCURVE_S1.);+#5155 = LINE('',#5156,#5157);+#5156 = CARTESIAN_POINT('',(-1.629544791117,1.293571288975,10.505));+#5157 = VECTOR('',#5158,1.);+#5158 = DIRECTION('',(0.971953286769,-0.23517399588,0.));+#5159 = PCURVE('',#5027,#5160);+#5160 = DEFINITIONAL_REPRESENTATION('',(#5161),#5165);+#5161 = LINE('',#5162,#5163);+#5162 = CARTESIAN_POINT('',(0.421975949244,0.565154798763));+#5163 = VECTOR('',#5164,1.);+#5164 = DIRECTION('',(-0.23517399588,-0.971953286769));+#5165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5166 = ORIENTED_EDGE('',*,*,#5167,.T.);+#5167 = EDGE_CURVE('',#5152,#5168,#5170,.T.);+#5168 = VERTEX_POINT('',#5169);+#5169 = CARTESIAN_POINT('',(-1.320977831592,1.107864068311,10.505));+#5170 = SURFACE_CURVE('',#5171,(#5175),.PCURVE_S1.);+#5171 = LINE('',#5172,#5173);+#5172 = CARTESIAN_POINT('',(-1.320977831592,1.218910370744,10.505));+#5173 = VECTOR('',#5174,1.);+#5174 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5175 = PCURVE('',#5027,#5176);+#5176 = DEFINITIONAL_REPRESENTATION('',(#5177),#5181);+#5177 = LINE('',#5178,#5179);+#5178 = CARTESIAN_POINT('',(0.347315031013,0.256587839238));+#5179 = VECTOR('',#5180,1.);+#5180 = DIRECTION('',(-1.,0.));+#5181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5182 = ORIENTED_EDGE('',*,*,#5183,.T.);+#5183 = EDGE_CURVE('',#5168,#5184,#5186,.T.);+#5184 = VERTEX_POINT('',#5185);+#5185 = CARTESIAN_POINT('',(-1.629544791117,1.032258075166,10.505));+#5186 = SURFACE_CURVE('',#5187,(#5191),.PCURVE_S1.);+#5187 = LINE('',#5188,#5189);+#5188 = CARTESIAN_POINT('',(-1.320977831592,1.107864068311,10.505));+#5189 = VECTOR('',#5190,1.);+#5190 = DIRECTION('',(-0.971269251839,-0.237983277633,0.));+#5191 = PCURVE('',#5027,#5192);+#5192 = DEFINITIONAL_REPRESENTATION('',(#5193),#5197);+#5193 = LINE('',#5194,#5195);+#5194 = CARTESIAN_POINT('',(0.23626872858,0.256587839238));+#5195 = VECTOR('',#5196,1.);+#5196 = DIRECTION('',(-0.237983277633,0.971269251839));+#5197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5198 = ORIENTED_EDGE('',*,*,#5199,.T.);+#5199 = EDGE_CURVE('',#5184,#5200,#5202,.T.);+#5200 = VERTEX_POINT('',#5201);+#5201 = CARTESIAN_POINT('',(-1.064389992354,1.032258075166,10.505));+#5202 = SURFACE_CURVE('',#5203,(#5207),.PCURVE_S1.);+#5203 = LINE('',#5204,#5205);+#5204 = CARTESIAN_POINT('',(-1.629544791117,1.032258075166,10.505));+#5205 = VECTOR('',#5206,1.);+#5206 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5207 = PCURVE('',#5027,#5208);+#5208 = DEFINITIONAL_REPRESENTATION('',(#5209),#5213);+#5209 = LINE('',#5210,#5211);+#5210 = CARTESIAN_POINT('',(0.160662735435,0.565154798763));+#5211 = VECTOR('',#5212,1.);+#5212 = DIRECTION('',(0.,-1.));+#5213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5214 = ORIENTED_EDGE('',*,*,#5215,.T.);+#5215 = EDGE_CURVE('',#5200,#5017,#5216,.T.);+#5216 = SURFACE_CURVE('',#5217,(#5221),.PCURVE_S1.);+#5217 = LINE('',#5218,#5219);+#5218 = CARTESIAN_POINT('',(-1.064389992354,1.032258075166,10.505));+#5219 = VECTOR('',#5220,1.);+#5220 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5221 = PCURVE('',#5027,#5222);+#5222 = DEFINITIONAL_REPRESENTATION('',(#5223),#5227);+#5223 = LINE('',#5224,#5225);+#5224 = CARTESIAN_POINT('',(0.160662735435,1.783714680792E-17));+#5225 = VECTOR('',#5226,1.);+#5226 = DIRECTION('',(-1.,0.));+#5227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5228 = SHELL_BASED_SURFACE_MODEL('',(#5229));+#5229 = OPEN_SHELL('',(#5230));+#5230 = ADVANCED_FACE('',(#5231),#5245,.T.);+#5231 = FACE_BOUND('',#5232,.F.);+#5232 = EDGE_LOOP('',(#5233,#5256,#5272,#5288,#5304,#5320,#5336,#5352,+    #5368,#5384,#5400));+#5233 = ORIENTED_EDGE('',*,*,#5234,.T.);+#5234 = EDGE_CURVE('',#5235,#5237,#5239,.T.);+#5235 = VERTEX_POINT('',#5236);+#5236 = CARTESIAN_POINT('',(-1.064389992354,1.543071066355,10.505));+#5237 = VERTEX_POINT('',#5238);+#5238 = CARTESIAN_POINT('',(-1.187249731215,1.543071066355,10.505));+#5239 = SURFACE_CURVE('',#5240,(#5244),.PCURVE_S1.);+#5240 = LINE('',#5241,#5242);+#5241 = CARTESIAN_POINT('',(-1.064389992354,1.543071066355,10.505));+#5242 = VECTOR('',#5243,1.);+#5243 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5244 = PCURVE('',#5245,#5250);+#5245 = PLANE('',#5246);+#5246 = AXIS2_PLACEMENT_3D('',#5247,#5248,#5249);+#5247 = CARTESIAN_POINT('',(-1.064389992354,1.454234024409,10.505));+#5248 = DIRECTION('',(0.,0.,1.));+#5249 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#5250 = DEFINITIONAL_REPRESENTATION('',(#5251),#5255);+#5251 = LINE('',#5252,#5253);+#5252 = CARTESIAN_POINT('',(8.8837041946E-02,9.862892940803E-18));+#5253 = VECTOR('',#5254,1.);+#5254 = DIRECTION('',(0.,1.));+#5255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5256 = ORIENTED_EDGE('',*,*,#5257,.T.);+#5257 = EDGE_CURVE('',#5237,#5258,#5260,.T.);+#5258 = VERTEX_POINT('',#5259);+#5259 = CARTESIAN_POINT('',(-1.187249731215,1.699008427218,10.505));+#5260 = SURFACE_CURVE('',#5261,(#5265),.PCURVE_S1.);+#5261 = LINE('',#5262,#5263);+#5262 = CARTESIAN_POINT('',(-1.187249731215,1.543071066355,10.505));+#5263 = VECTOR('',#5264,1.);+#5264 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5265 = PCURVE('',#5245,#5266);+#5266 = DEFINITIONAL_REPRESENTATION('',(#5267),#5271);+#5267 = LINE('',#5268,#5269);+#5268 = CARTESIAN_POINT('',(8.8837041946E-02,0.122859738861));+#5269 = VECTOR('',#5270,1.);+#5270 = DIRECTION('',(1.,0.));+#5271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5272 = ORIENTED_EDGE('',*,*,#5273,.T.);+#5273 = EDGE_CURVE('',#5258,#5274,#5276,.T.);+#5274 = VERTEX_POINT('',#5275);+#5275 = CARTESIAN_POINT('',(-1.645138527203,1.699008427218,10.505));+#5276 = SURFACE_CURVE('',#5277,(#5281),.PCURVE_S1.);+#5277 = LINE('',#5278,#5279);+#5278 = CARTESIAN_POINT('',(-1.187249731215,1.699008427218,10.505));+#5279 = VECTOR('',#5280,1.);+#5280 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5281 = PCURVE('',#5245,#5282);+#5282 = DEFINITIONAL_REPRESENTATION('',(#5283),#5287);+#5283 = LINE('',#5284,#5285);+#5284 = CARTESIAN_POINT('',(0.244774402809,0.122859738861));+#5285 = VECTOR('',#5286,1.);+#5286 = DIRECTION('',(0.,1.));+#5287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5288 = ORIENTED_EDGE('',*,*,#5289,.T.);+#5289 = EDGE_CURVE('',#5274,#5290,#5292,.T.);+#5290 = VERTEX_POINT('',#5291);+#5291 = CARTESIAN_POINT('',(-1.609225680459,1.55393942787,10.505));+#5292 = SURFACE_CURVE('',#5293,(#5297),.PCURVE_S1.);+#5293 = LINE('',#5294,#5295);+#5294 = CARTESIAN_POINT('',(-1.645138527203,1.699008427218,10.505));+#5295 = VECTOR('',#5296,1.);+#5296 = DIRECTION('',(0.240303066167,-0.970697912015,0.));+#5297 = PCURVE('',#5245,#5298);+#5298 = DEFINITIONAL_REPRESENTATION('',(#5299),#5303);+#5299 = LINE('',#5300,#5301);+#5300 = CARTESIAN_POINT('',(0.244774402809,0.580748534849));+#5301 = VECTOR('',#5302,1.);+#5302 = DIRECTION('',(-0.970697912015,-0.240303066167));+#5303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5304 = ORIENTED_EDGE('',*,*,#5305,.T.);+#5305 = EDGE_CURVE('',#5290,#5306,#5308,.T.);+#5306 = VERTEX_POINT('',#5307);+#5307 = CARTESIAN_POINT('',(-1.734920644064,1.55393942787,10.505));+#5308 = SURFACE_CURVE('',#5309,(#5313),.PCURVE_S1.);+#5309 = LINE('',#5310,#5311);+#5310 = CARTESIAN_POINT('',(-1.609225680459,1.55393942787,10.505));+#5311 = VECTOR('',#5312,1.);+#5312 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5313 = PCURVE('',#5245,#5314);+#5314 = DEFINITIONAL_REPRESENTATION('',(#5315),#5319);+#5315 = LINE('',#5316,#5317);+#5316 = CARTESIAN_POINT('',(9.9705403461E-02,0.544835688105));+#5317 = VECTOR('',#5318,1.);+#5318 = DIRECTION('',(0.,1.));+#5319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5320 = ORIENTED_EDGE('',*,*,#5321,.T.);+#5321 = EDGE_CURVE('',#5306,#5322,#5324,.T.);+#5322 = VERTEX_POINT('',#5323);+#5323 = CARTESIAN_POINT('',(-1.769888415893,1.699953502132,10.505));+#5324 = SURFACE_CURVE('',#5325,(#5329),.PCURVE_S1.);+#5325 = LINE('',#5326,#5327);+#5326 = CARTESIAN_POINT('',(-1.734920644064,1.55393942787,10.505));+#5327 = VECTOR('',#5328,1.);+#5328 = DIRECTION('',(-0.232896789262,0.972501457866,0.));+#5329 = PCURVE('',#5245,#5330);+#5330 = DEFINITIONAL_REPRESENTATION('',(#5331),#5335);+#5331 = LINE('',#5332,#5333);+#5332 = CARTESIAN_POINT('',(9.9705403461E-02,0.67053065171));+#5333 = VECTOR('',#5334,1.);+#5334 = DIRECTION('',(0.972501457866,0.232896789262));+#5335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5336 = ORIENTED_EDGE('',*,*,#5337,.T.);+#5337 = EDGE_CURVE('',#5322,#5338,#5340,.T.);+#5338 = VERTEX_POINT('',#5339);+#5339 = CARTESIAN_POINT('',(-1.769888415893,1.834626677423,10.505));+#5340 = SURFACE_CURVE('',#5341,(#5345),.PCURVE_S1.);+#5341 = LINE('',#5342,#5343);+#5342 = CARTESIAN_POINT('',(-1.769888415893,1.699953502132,10.505));+#5343 = VECTOR('',#5344,1.);+#5344 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5345 = PCURVE('',#5245,#5346);+#5346 = DEFINITIONAL_REPRESENTATION('',(#5347),#5351);+#5347 = LINE('',#5348,#5349);+#5348 = CARTESIAN_POINT('',(0.245719477723,0.705498423539));+#5349 = VECTOR('',#5350,1.);+#5350 = DIRECTION('',(1.,0.));+#5351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5352 = ORIENTED_EDGE('',*,*,#5353,.T.);+#5353 = EDGE_CURVE('',#5338,#5354,#5356,.T.);+#5354 = VERTEX_POINT('',#5355);+#5355 = CARTESIAN_POINT('',(-1.187249731215,1.834626677423,10.505));+#5356 = SURFACE_CURVE('',#5357,(#5361),.PCURVE_S1.);+#5357 = LINE('',#5358,#5359);+#5358 = CARTESIAN_POINT('',(-1.769888415893,1.834626677423,10.505));+#5359 = VECTOR('',#5360,1.);+#5360 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5361 = PCURVE('',#5245,#5362);+#5362 = DEFINITIONAL_REPRESENTATION('',(#5363),#5367);+#5363 = LINE('',#5364,#5365);+#5364 = CARTESIAN_POINT('',(0.380392653014,0.705498423539));+#5365 = VECTOR('',#5366,1.);+#5366 = DIRECTION('',(0.,-1.));+#5367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5368 = ORIENTED_EDGE('',*,*,#5369,.T.);+#5369 = EDGE_CURVE('',#5354,#5370,#5372,.T.);+#5370 = VERTEX_POINT('',#5371);+#5371 = CARTESIAN_POINT('',(-1.187249731215,1.990564038286,10.505));+#5372 = SURFACE_CURVE('',#5373,(#5377),.PCURVE_S1.);+#5373 = LINE('',#5374,#5375);+#5374 = CARTESIAN_POINT('',(-1.187249731215,1.834626677423,10.505));+#5375 = VECTOR('',#5376,1.);+#5376 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5377 = PCURVE('',#5245,#5378);+#5378 = DEFINITIONAL_REPRESENTATION('',(#5379),#5383);+#5379 = LINE('',#5380,#5381);+#5380 = CARTESIAN_POINT('',(0.380392653014,0.122859738861));+#5381 = VECTOR('',#5382,1.);+#5382 = DIRECTION('',(1.,0.));+#5383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5384 = ORIENTED_EDGE('',*,*,#5385,.T.);+#5385 = EDGE_CURVE('',#5370,#5386,#5388,.T.);+#5386 = VERTEX_POINT('',#5387);+#5387 = CARTESIAN_POINT('',(-1.064389992354,1.990564038286,10.505));+#5388 = SURFACE_CURVE('',#5389,(#5393),.PCURVE_S1.);+#5389 = LINE('',#5390,#5391);+#5390 = CARTESIAN_POINT('',(-1.187249731215,1.990564038286,10.505));+#5391 = VECTOR('',#5392,1.);+#5392 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5393 = PCURVE('',#5245,#5394);+#5394 = DEFINITIONAL_REPRESENTATION('',(#5395),#5399);+#5395 = LINE('',#5396,#5397);+#5396 = CARTESIAN_POINT('',(0.536330013877,0.122859738861));+#5397 = VECTOR('',#5398,1.);+#5398 = DIRECTION('',(0.,-1.));+#5399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5400 = ORIENTED_EDGE('',*,*,#5401,.T.);+#5401 = EDGE_CURVE('',#5386,#5235,#5402,.T.);+#5402 = SURFACE_CURVE('',#5403,(#5407),.PCURVE_S1.);+#5403 = LINE('',#5404,#5405);+#5404 = CARTESIAN_POINT('',(-1.064389992354,1.990564038286,10.505));+#5405 = VECTOR('',#5406,1.);+#5406 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5407 = PCURVE('',#5245,#5408);+#5408 = DEFINITIONAL_REPRESENTATION('',(#5409),#5413);+#5409 = LINE('',#5410,#5411);+#5410 = CARTESIAN_POINT('',(0.536330013877,5.954459302037E-17));+#5411 = VECTOR('',#5412,1.);+#5412 = DIRECTION('',(-1.,0.));+#5413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5414 = SHELL_BASED_SURFACE_MODEL('',(#5415));+#5415 = OPEN_SHELL('',(#5416));+#5416 = ADVANCED_FACE('',(#5417),#5431,.T.);+#5417 = FACE_BOUND('',#5418,.F.);+#5418 = EDGE_LOOP('',(#5419,#5442,#5458,#5474,#5490,#5506,#5522,#5538));+#5419 = ORIENTED_EDGE('',*,*,#5420,.T.);+#5420 = EDGE_CURVE('',#5421,#5423,#5425,.T.);+#5421 = VERTEX_POINT('',#5422);+#5422 = CARTESIAN_POINT('',(-1.416430397938,2.26936113801,10.505));+#5423 = VERTEX_POINT('',#5424);+#5424 = CARTESIAN_POINT('',(-1.458486231625,2.286372486468,10.505));+#5425 = SURFACE_CURVE('',#5426,(#5430),.PCURVE_S1.);+#5426 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5427,#5428,#5429),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5427 = CARTESIAN_POINT('',(-1.416430397938,2.26936113801,10.505));+#5428 = CARTESIAN_POINT('',(-1.441474883167,2.26936113801,10.505));+#5429 = CARTESIAN_POINT('',(-1.458486231625,2.286372486468,10.505));+#5430 = PCURVE('',#5431,#5436);+#5431 = PLANE('',#5432);+#5432 = AXIS2_PLACEMENT_3D('',#5433,#5434,#5435);+#5433 = CARTESIAN_POINT('',(-1.064389992354,2.036872709087,10.505));+#5434 = DIRECTION('',(0.,0.,1.));+#5435 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#5436 = DEFINITIONAL_REPRESENTATION('',(#5437),#5441);+#5437 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5438,#5439,#5440),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5438 = CARTESIAN_POINT('',(0.232488428923,0.352040405584));+#5439 = CARTESIAN_POINT('',(0.232488428923,0.377084890813));+#5440 = CARTESIAN_POINT('',(0.249499777381,0.394096239271));+#5441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5442 = ORIENTED_EDGE('',*,*,#5443,.T.);+#5443 = EDGE_CURVE('',#5423,#5444,#5446,.T.);+#5444 = VERTEX_POINT('',#5445);+#5445 = CARTESIAN_POINT('',(-1.475497580083,2.327955782698,10.505));+#5446 = SURFACE_CURVE('',#5447,(#5451),.PCURVE_S1.);+#5447 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5448,#5449,#5450),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5448 = CARTESIAN_POINT('',(-1.458486231625,2.286372486468,10.505));+#5449 = CARTESIAN_POINT('',(-1.475497580083,2.303383834925,10.505));+#5450 = CARTESIAN_POINT('',(-1.475497580083,2.327955782698,10.505));+#5451 = PCURVE('',#5431,#5452);+#5452 = DEFINITIONAL_REPRESENTATION('',(#5453),#5457);+#5453 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5454,#5455,#5456),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5454 = CARTESIAN_POINT('',(0.249499777381,0.394096239271));+#5455 = CARTESIAN_POINT('',(0.266511125838,0.411107587729));+#5456 = CARTESIAN_POINT('',(0.291083073611,0.411107587729));+#5457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5458 = ORIENTED_EDGE('',*,*,#5459,.T.);+#5459 = EDGE_CURVE('',#5444,#5460,#5462,.T.);+#5460 = VERTEX_POINT('',#5461);+#5461 = CARTESIAN_POINT('',(-1.458486231625,2.370011616385,10.505));+#5462 = SURFACE_CURVE('',#5463,(#5467),.PCURVE_S1.);+#5463 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5464,#5465,#5466),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5464 = CARTESIAN_POINT('',(-1.475497580083,2.327955782698,10.505));+#5465 = CARTESIAN_POINT('',(-1.475497580083,2.353000267927,10.505));+#5466 = CARTESIAN_POINT('',(-1.458486231625,2.370011616385,10.505));+#5467 = PCURVE('',#5431,#5468);+#5468 = DEFINITIONAL_REPRESENTATION('',(#5469),#5473);+#5469 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5470,#5471,#5472),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5470 = CARTESIAN_POINT('',(0.291083073611,0.411107587729));+#5471 = CARTESIAN_POINT('',(0.31612755884,0.411107587729));+#5472 = CARTESIAN_POINT('',(0.333138907298,0.394096239271));+#5473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5474 = ORIENTED_EDGE('',*,*,#5475,.T.);+#5475 = EDGE_CURVE('',#5460,#5476,#5478,.T.);+#5476 = VERTEX_POINT('',#5477);+#5477 = CARTESIAN_POINT('',(-1.416430397938,2.387022964843,10.505));+#5478 = SURFACE_CURVE('',#5479,(#5483),.PCURVE_S1.);+#5479 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5480,#5481,#5482),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5480 = CARTESIAN_POINT('',(-1.458486231625,2.370011616385,10.505));+#5481 = CARTESIAN_POINT('',(-1.441474883167,2.387022964843,10.505));+#5482 = CARTESIAN_POINT('',(-1.416430397938,2.387022964843,10.505));+#5483 = PCURVE('',#5431,#5484);+#5484 = DEFINITIONAL_REPRESENTATION('',(#5485),#5489);+#5485 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5486,#5487,#5488),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5486 = CARTESIAN_POINT('',(0.333138907298,0.394096239271));+#5487 = CARTESIAN_POINT('',(0.350150255756,0.377084890813));+#5488 = CARTESIAN_POINT('',(0.350150255756,0.352040405584));+#5489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5490 = ORIENTED_EDGE('',*,*,#5491,.T.);+#5491 = EDGE_CURVE('',#5476,#5492,#5494,.T.);+#5492 = VERTEX_POINT('',#5493);+#5493 = CARTESIAN_POINT('',(-1.374847101708,2.370011616385,10.505));+#5494 = SURFACE_CURVE('',#5495,(#5499),.PCURVE_S1.);+#5495 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5496,#5497,#5498),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5496 = CARTESIAN_POINT('',(-1.416430397938,2.387022964843,10.505));+#5497 = CARTESIAN_POINT('',(-1.391858450166,2.387022964843,10.505));+#5498 = CARTESIAN_POINT('',(-1.374847101708,2.370011616385,10.505));+#5499 = PCURVE('',#5431,#5500);+#5500 = DEFINITIONAL_REPRESENTATION('',(#5501),#5505);+#5501 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5502,#5503,#5504),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5502 = CARTESIAN_POINT('',(0.350150255756,0.352040405584));+#5503 = CARTESIAN_POINT('',(0.350150255756,0.327468457812));+#5504 = CARTESIAN_POINT('',(0.333138907298,0.310457109354));+#5505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5506 = ORIENTED_EDGE('',*,*,#5507,.T.);+#5507 = EDGE_CURVE('',#5492,#5508,#5510,.T.);+#5508 = VERTEX_POINT('',#5509);+#5509 = CARTESIAN_POINT('',(-1.35783575325,2.327955782698,10.505));+#5510 = SURFACE_CURVE('',#5511,(#5515),.PCURVE_S1.);+#5511 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5512,#5513,#5514),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5512 = CARTESIAN_POINT('',(-1.374847101708,2.370011616385,10.505));+#5513 = CARTESIAN_POINT('',(-1.35783575325,2.353000267927,10.505));+#5514 = CARTESIAN_POINT('',(-1.35783575325,2.327955782698,10.505));+#5515 = PCURVE('',#5431,#5516);+#5516 = DEFINITIONAL_REPRESENTATION('',(#5517),#5521);+#5517 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5518,#5519,#5520),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5518 = CARTESIAN_POINT('',(0.333138907298,0.310457109354));+#5519 = CARTESIAN_POINT('',(0.31612755884,0.293445760896));+#5520 = CARTESIAN_POINT('',(0.291083073611,0.293445760896));+#5521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5522 = ORIENTED_EDGE('',*,*,#5523,.T.);+#5523 = EDGE_CURVE('',#5508,#5524,#5526,.T.);+#5524 = VERTEX_POINT('',#5525);+#5525 = CARTESIAN_POINT('',(-1.374610832979,2.286372486468,10.505));+#5526 = SURFACE_CURVE('',#5527,(#5531),.PCURVE_S1.);+#5527 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5528,#5529,#5530),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5528 = CARTESIAN_POINT('',(-1.35783575325,2.327955782698,10.505));+#5529 = CARTESIAN_POINT('',(-1.35783575325,2.303383834925,10.505));+#5530 = CARTESIAN_POINT('',(-1.374610832979,2.286372486468,10.505));+#5531 = PCURVE('',#5431,#5532);+#5532 = DEFINITIONAL_REPRESENTATION('',(#5533),#5537);+#5533 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5534,#5535,#5536),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5534 = CARTESIAN_POINT('',(0.291083073611,0.293445760896));+#5535 = CARTESIAN_POINT('',(0.266511125838,0.293445760896));+#5536 = CARTESIAN_POINT('',(0.249499777381,0.310220840625));+#5537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5538 = ORIENTED_EDGE('',*,*,#5539,.T.);+#5539 = EDGE_CURVE('',#5524,#5421,#5540,.T.);+#5540 = SURFACE_CURVE('',#5541,(#5545),.PCURVE_S1.);+#5541 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5542,#5543,#5544),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5542 = CARTESIAN_POINT('',(-1.374610832979,2.286372486468,10.505));+#5543 = CARTESIAN_POINT('',(-1.391385912708,2.26936113801,10.505));+#5544 = CARTESIAN_POINT('',(-1.416430397938,2.26936113801,10.505));+#5545 = PCURVE('',#5431,#5546);+#5546 = DEFINITIONAL_REPRESENTATION('',(#5547),#5551);+#5547 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5548,#5549,#5550),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5548 = CARTESIAN_POINT('',(0.249499777381,0.310220840625));+#5549 = CARTESIAN_POINT('',(0.232488428923,0.326995920354));+#5550 = CARTESIAN_POINT('',(0.232488428923,0.352040405584));+#5551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5552 = SHELL_BASED_SURFACE_MODEL('',(#5553));+#5553 = OPEN_SHELL('',(#5554));+#5554 = ADVANCED_FACE('',(#5555,#5690),#5569,.T.);+#5555 = FACE_BOUND('',#5556,.F.);+#5556 = EDGE_LOOP('',(#5557,#5580,#5596,#5612,#5628,#5644,#5660,#5676));+#5557 = ORIENTED_EDGE('',*,*,#5558,.T.);+#5558 = EDGE_CURVE('',#5559,#5561,#5563,.T.);+#5559 = VERTEX_POINT('',#5560);+#5560 = CARTESIAN_POINT('',(-1.416430397938,2.094994816318,10.505));+#5561 = VERTEX_POINT('',#5562);+#5562 = CARTESIAN_POINT('',(-1.691210929276,2.153116923549,10.505));+#5563 = SURFACE_CURVE('',#5564,(#5568),.PCURVE_S1.);+#5564 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5565,#5566,#5567),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5565 = CARTESIAN_POINT('',(-1.416430397938,2.094994816318,10.505));+#5566 = CARTESIAN_POINT('',(-1.599774931316,2.094994816318,10.505));+#5567 = CARTESIAN_POINT('',(-1.691210929276,2.153116923549,10.505));+#5568 = PCURVE('',#5569,#5574);+#5569 = PLANE('',#5570);+#5570 = AXIS2_PLACEMENT_3D('',#5571,#5572,#5573);+#5571 = CARTESIAN_POINT('',(-1.064389992354,2.036872709087,10.505));+#5572 = DIRECTION('',(0.,0.,1.));+#5573 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#5574 = DEFINITIONAL_REPRESENTATION('',(#5575),#5579);+#5575 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5576,#5577,#5578),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5576 = CARTESIAN_POINT('',(5.8122107231E-02,0.352040405584));+#5577 = CARTESIAN_POINT('',(5.8122107231E-02,0.535384938962));+#5578 = CARTESIAN_POINT('',(0.116244214462,0.626820936922));+#5579 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5580 = ORIENTED_EDGE('',*,*,#5581,.T.);+#5581 = EDGE_CURVE('',#5561,#5582,#5584,.T.);+#5582 = VERTEX_POINT('',#5583);+#5583 = CARTESIAN_POINT('',(-1.782646927237,2.327955782698,10.505));+#5584 = SURFACE_CURVE('',#5585,(#5589),.PCURVE_S1.);+#5585 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5586,#5587,#5588),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5586 = CARTESIAN_POINT('',(-1.691210929276,2.153116923549,10.505));+#5587 = CARTESIAN_POINT('',(-1.782646927237,2.211239030779,10.505));+#5588 = CARTESIAN_POINT('',(-1.782646927237,2.327955782698,10.505));+#5589 = PCURVE('',#5569,#5590);+#5590 = DEFINITIONAL_REPRESENTATION('',(#5591),#5595);+#5591 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5592,#5593,#5594),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5592 = CARTESIAN_POINT('',(0.116244214462,0.626820936922));+#5593 = CARTESIAN_POINT('',(0.174366321692,0.718256934883));+#5594 = CARTESIAN_POINT('',(0.291083073611,0.718256934883));+#5595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5596 = ORIENTED_EDGE('',*,*,#5597,.T.);+#5597 = EDGE_CURVE('',#5582,#5598,#5600,.T.);+#5598 = VERTEX_POINT('',#5599);+#5599 = CARTESIAN_POINT('',(-1.691447198005,2.503267179304,10.505));+#5600 = SURFACE_CURVE('',#5601,(#5605),.PCURVE_S1.);+#5601 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5602,#5603,#5604),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5602 = CARTESIAN_POINT('',(-1.782646927237,2.327955782698,10.505));+#5603 = CARTESIAN_POINT('',(-1.782646927237,2.445145072073,10.505));+#5604 = CARTESIAN_POINT('',(-1.691447198005,2.503267179304,10.505));+#5605 = PCURVE('',#5569,#5606);+#5606 = DEFINITIONAL_REPRESENTATION('',(#5607),#5611);+#5607 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5608,#5609,#5610),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5608 = CARTESIAN_POINT('',(0.291083073611,0.718256934883));+#5609 = CARTESIAN_POINT('',(0.408272362986,0.718256934883));+#5610 = CARTESIAN_POINT('',(0.466394470217,0.627057205651));+#5611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5612 = ORIENTED_EDGE('',*,*,#5613,.T.);+#5613 = EDGE_CURVE('',#5598,#5614,#5616,.T.);+#5614 = VERTEX_POINT('',#5615);+#5615 = CARTESIAN_POINT('',(-1.416430397938,2.561389286535,10.505));+#5616 = SURFACE_CURVE('',#5617,(#5621),.PCURVE_S1.);+#5617 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5618,#5619,#5620),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5618 = CARTESIAN_POINT('',(-1.691447198005,2.503267179304,10.505));+#5619 = CARTESIAN_POINT('',(-1.600247468773,2.561389286535,10.505));+#5620 = CARTESIAN_POINT('',(-1.416430397938,2.561389286535,10.505));+#5621 = PCURVE('',#5569,#5622);+#5622 = DEFINITIONAL_REPRESENTATION('',(#5623),#5627);+#5623 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5624,#5625,#5626),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5624 = CARTESIAN_POINT('',(0.466394470217,0.627057205651));+#5625 = CARTESIAN_POINT('',(0.524516577448,0.535857476419));+#5626 = CARTESIAN_POINT('',(0.524516577448,0.352040405584));+#5627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5628 = ORIENTED_EDGE('',*,*,#5629,.T.);+#5629 = EDGE_CURVE('',#5614,#5630,#5632,.T.);+#5630 = VERTEX_POINT('',#5631);+#5631 = CARTESIAN_POINT('',(-1.141886135328,2.503267179304,10.505));+#5632 = SURFACE_CURVE('',#5633,(#5637),.PCURVE_S1.);+#5633 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5634,#5635,#5636),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5634 = CARTESIAN_POINT('',(-1.416430397938,2.561389286535,10.505));+#5635 = CARTESIAN_POINT('',(-1.23308586456,2.561389286535,10.505));+#5636 = CARTESIAN_POINT('',(-1.141886135328,2.503267179304,10.505));+#5637 = PCURVE('',#5569,#5638);+#5638 = DEFINITIONAL_REPRESENTATION('',(#5639),#5643);+#5639 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5640,#5641,#5642),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5640 = CARTESIAN_POINT('',(0.524516577448,0.352040405584));+#5641 = CARTESIAN_POINT('',(0.524516577448,0.168695872206));+#5642 = CARTESIAN_POINT('',(0.466394470217,7.7496142974E-02));+#5643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5644 = ORIENTED_EDGE('',*,*,#5645,.T.);+#5645 = EDGE_CURVE('',#5630,#5646,#5648,.T.);+#5646 = VERTEX_POINT('',#5647);+#5647 = CARTESIAN_POINT('',(-1.050686406096,2.327955782698,10.505));+#5648 = SURFACE_CURVE('',#5649,(#5653),.PCURVE_S1.);+#5649 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5650,#5651,#5652),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5650 = CARTESIAN_POINT('',(-1.141886135328,2.503267179304,10.505));+#5651 = CARTESIAN_POINT('',(-1.050686406096,2.445145072073,10.505));+#5652 = CARTESIAN_POINT('',(-1.050686406096,2.327955782698,10.505));+#5653 = PCURVE('',#5569,#5654);+#5654 = DEFINITIONAL_REPRESENTATION('',(#5655),#5659);+#5655 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5656,#5657,#5658),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5656 = CARTESIAN_POINT('',(0.466394470217,7.7496142974E-02));+#5657 = CARTESIAN_POINT('',(0.408272362986,-1.3703586258E-02));+#5658 = CARTESIAN_POINT('',(0.291083073611,-1.3703586258E-02));+#5659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5660 = ORIENTED_EDGE('',*,*,#5661,.T.);+#5661 = EDGE_CURVE('',#5646,#5662,#5664,.T.);+#5662 = VERTEX_POINT('',#5663);+#5663 = CARTESIAN_POINT('',(-1.142122404057,2.153116923549,10.505));+#5664 = SURFACE_CURVE('',#5665,(#5669),.PCURVE_S1.);+#5665 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5666,#5667,#5668),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5666 = CARTESIAN_POINT('',(-1.050686406096,2.327955782698,10.505));+#5667 = CARTESIAN_POINT('',(-1.050686406096,2.211239030779,10.505));+#5668 = CARTESIAN_POINT('',(-1.142122404057,2.153116923549,10.505));+#5669 = PCURVE('',#5569,#5670);+#5670 = DEFINITIONAL_REPRESENTATION('',(#5671),#5675);+#5671 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5672,#5673,#5674),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5672 = CARTESIAN_POINT('',(0.291083073611,-1.3703586258E-02));+#5673 = CARTESIAN_POINT('',(0.174366321692,-1.3703586258E-02));+#5674 = CARTESIAN_POINT('',(0.116244214462,7.7732411703E-02));+#5675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5676 = ORIENTED_EDGE('',*,*,#5677,.T.);+#5677 = EDGE_CURVE('',#5662,#5559,#5678,.T.);+#5678 = SURFACE_CURVE('',#5679,(#5683),.PCURVE_S1.);+#5679 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5680,#5681,#5682),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5680 = CARTESIAN_POINT('',(-1.142122404057,2.153116923549,10.505));+#5681 = CARTESIAN_POINT('',(-1.233558402017,2.094994816318,10.505));+#5682 = CARTESIAN_POINT('',(-1.416430397938,2.094994816318,10.505));+#5683 = PCURVE('',#5569,#5684);+#5684 = DEFINITIONAL_REPRESENTATION('',(#5685),#5689);+#5685 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5686,#5687,#5688),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5686 = CARTESIAN_POINT('',(0.116244214462,7.7732411703E-02));+#5687 = CARTESIAN_POINT('',(5.8122107231E-02,0.169168409663));+#5688 = CARTESIAN_POINT('',(5.8122107231E-02,0.352040405584));+#5689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5690 = FACE_BOUND('',#5691,.F.);+#5691 = EDGE_LOOP('',(#5692,#5710,#5726,#5742,#5758,#5774,#5790,#5806));+#5692 = ORIENTED_EDGE('',*,*,#5693,.T.);+#5693 = EDGE_CURVE('',#5694,#5696,#5698,.T.);+#5694 = VERTEX_POINT('',#5695);+#5695 = CARTESIAN_POINT('',(-1.664512562947,2.327955782698,10.505));+#5696 = VERTEX_POINT('',#5697);+#5697 = CARTESIAN_POINT('',(-1.605445380802,2.257547701581,10.505));+#5698 = SURFACE_CURVE('',#5699,(#5703),.PCURVE_S1.);+#5699 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5700,#5701,#5702),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5700 = CARTESIAN_POINT('',(-1.664512562947,2.327955782698,10.505));+#5701 = CARTESIAN_POINT('',(-1.664512562947,2.279756962067,10.505));+#5702 = CARTESIAN_POINT('',(-1.605445380802,2.257547701581,10.505));+#5703 = PCURVE('',#5569,#5704);+#5704 = DEFINITIONAL_REPRESENTATION('',(#5705),#5709);+#5705 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5706,#5707,#5708),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5706 = CARTESIAN_POINT('',(0.291083073611,0.600122570593));+#5707 = CARTESIAN_POINT('',(0.24288425298,0.600122570593));+#5708 = CARTESIAN_POINT('',(0.220674992494,0.541055388448));+#5709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5710 = ORIENTED_EDGE('',*,*,#5711,.T.);+#5711 = EDGE_CURVE('',#5696,#5712,#5714,.T.);+#5712 = VERTEX_POINT('',#5713);+#5713 = CARTESIAN_POINT('',(-1.416430397938,2.235338441094,10.505));+#5714 = SURFACE_CURVE('',#5715,(#5719),.PCURVE_S1.);+#5715 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5716,#5717,#5718),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5716 = CARTESIAN_POINT('',(-1.605445380802,2.257547701581,10.505));+#5717 = CARTESIAN_POINT('',(-1.546378198657,2.235338441094,10.505));+#5718 = CARTESIAN_POINT('',(-1.416430397938,2.235338441094,10.505));+#5719 = PCURVE('',#5569,#5720);+#5720 = DEFINITIONAL_REPRESENTATION('',(#5721),#5725);+#5721 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5722,#5723,#5724),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5722 = CARTESIAN_POINT('',(0.220674992494,0.541055388448));+#5723 = CARTESIAN_POINT('',(0.198465732007,0.481988206303));+#5724 = CARTESIAN_POINT('',(0.198465732007,0.352040405584));+#5725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5726 = ORIENTED_EDGE('',*,*,#5727,.T.);+#5727 = EDGE_CURVE('',#5712,#5728,#5730,.T.);+#5728 = VERTEX_POINT('',#5729);+#5729 = CARTESIAN_POINT('',(-1.227887952531,2.257547701581,10.505));+#5730 = SURFACE_CURVE('',#5731,(#5735),.PCURVE_S1.);+#5731 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5732,#5733,#5734),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5732 = CARTESIAN_POINT('',(-1.416430397938,2.235338441094,10.505));+#5733 = CARTESIAN_POINT('',(-1.286955134676,2.235338441094,10.505));+#5734 = CARTESIAN_POINT('',(-1.227887952531,2.257547701581,10.505));+#5735 = PCURVE('',#5569,#5736);+#5736 = DEFINITIONAL_REPRESENTATION('',(#5737),#5741);+#5737 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5738,#5739,#5740),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5738 = CARTESIAN_POINT('',(0.198465732007,0.352040405584));+#5739 = CARTESIAN_POINT('',(0.198465732007,0.222565142322));+#5740 = CARTESIAN_POINT('',(0.220674992494,0.163497960177));+#5741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5742 = ORIENTED_EDGE('',*,*,#5743,.T.);+#5743 = EDGE_CURVE('',#5728,#5744,#5746,.T.);+#5744 = VERTEX_POINT('',#5745);+#5745 = CARTESIAN_POINT('',(-1.168820770386,2.327955782698,10.505));+#5746 = SURFACE_CURVE('',#5747,(#5751),.PCURVE_S1.);+#5747 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5748,#5749,#5750),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5748 = CARTESIAN_POINT('',(-1.227887952531,2.257547701581,10.505));+#5749 = CARTESIAN_POINT('',(-1.168820770386,2.279756962067,10.505));+#5750 = CARTESIAN_POINT('',(-1.168820770386,2.327955782698,10.505));+#5751 = PCURVE('',#5569,#5752);+#5752 = DEFINITIONAL_REPRESENTATION('',(#5753),#5757);+#5753 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5754,#5755,#5756),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5754 = CARTESIAN_POINT('',(0.220674992494,0.163497960177));+#5755 = CARTESIAN_POINT('',(0.24288425298,0.104430778032));+#5756 = CARTESIAN_POINT('',(0.291083073611,0.104430778032));+#5757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5758 = ORIENTED_EDGE('',*,*,#5759,.T.);+#5759 = EDGE_CURVE('',#5744,#5760,#5762,.T.);+#5760 = VERTEX_POINT('',#5761);+#5761 = CARTESIAN_POINT('',(-1.227887952531,2.398836401272,10.505));+#5762 = SURFACE_CURVE('',#5763,(#5767),.PCURVE_S1.);+#5763 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5764,#5765,#5766),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5764 = CARTESIAN_POINT('',(-1.168820770386,2.327955782698,10.505));+#5765 = CARTESIAN_POINT('',(-1.168820770386,2.376627140785,10.505));+#5766 = CARTESIAN_POINT('',(-1.227887952531,2.398836401272,10.505));+#5767 = PCURVE('',#5569,#5768);+#5768 = DEFINITIONAL_REPRESENTATION('',(#5769),#5773);+#5769 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5770,#5771,#5772),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5770 = CARTESIAN_POINT('',(0.291083073611,0.104430778032));+#5771 = CARTESIAN_POINT('',(0.339754431698,0.104430778032));+#5772 = CARTESIAN_POINT('',(0.361963692185,0.163497960177));+#5773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5774 = ORIENTED_EDGE('',*,*,#5775,.T.);+#5775 = EDGE_CURVE('',#5760,#5776,#5778,.T.);+#5776 = VERTEX_POINT('',#5777);+#5777 = CARTESIAN_POINT('',(-1.416430397938,2.421045661758,10.505));+#5778 = SURFACE_CURVE('',#5779,(#5783),.PCURVE_S1.);+#5779 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5780,#5781,#5782),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5780 = CARTESIAN_POINT('',(-1.227887952531,2.398836401272,10.505));+#5781 = CARTESIAN_POINT('',(-1.286955134676,2.421045661758,10.505));+#5782 = CARTESIAN_POINT('',(-1.416430397938,2.421045661758,10.505));+#5783 = PCURVE('',#5569,#5784);+#5784 = DEFINITIONAL_REPRESENTATION('',(#5785),#5789);+#5785 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5786,#5787,#5788),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5786 = CARTESIAN_POINT('',(0.361963692185,0.163497960177));+#5787 = CARTESIAN_POINT('',(0.384172952671,0.222565142322));+#5788 = CARTESIAN_POINT('',(0.384172952671,0.352040405584));+#5789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5790 = ORIENTED_EDGE('',*,*,#5791,.T.);+#5791 = EDGE_CURVE('',#5776,#5792,#5794,.T.);+#5792 = VERTEX_POINT('',#5793);+#5793 = CARTESIAN_POINT('',(-1.605445380802,2.398836401272,10.505));+#5794 = SURFACE_CURVE('',#5795,(#5799),.PCURVE_S1.);+#5795 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5796,#5797,#5798),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5796 = CARTESIAN_POINT('',(-1.416430397938,2.421045661758,10.505));+#5797 = CARTESIAN_POINT('',(-1.546378198657,2.421045661758,10.505));+#5798 = CARTESIAN_POINT('',(-1.605445380802,2.398836401272,10.505));+#5799 = PCURVE('',#5569,#5800);+#5800 = DEFINITIONAL_REPRESENTATION('',(#5801),#5805);+#5801 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5802,#5803,#5804),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5802 = CARTESIAN_POINT('',(0.384172952671,0.352040405584));+#5803 = CARTESIAN_POINT('',(0.384172952671,0.481988206303));+#5804 = CARTESIAN_POINT('',(0.361963692185,0.541055388448));+#5805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5806 = ORIENTED_EDGE('',*,*,#5807,.T.);+#5807 = EDGE_CURVE('',#5792,#5694,#5808,.T.);+#5808 = SURFACE_CURVE('',#5809,(#5813),.PCURVE_S1.);+#5809 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5810,#5811,#5812),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5810 = CARTESIAN_POINT('',(-1.605445380802,2.398836401272,10.505));+#5811 = CARTESIAN_POINT('',(-1.664512562947,2.376627140785,10.505));+#5812 = CARTESIAN_POINT('',(-1.664512562947,2.327955782698,10.505));+#5813 = PCURVE('',#5569,#5814);+#5814 = DEFINITIONAL_REPRESENTATION('',(#5815),#5819);+#5815 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5816,#5817,#5818),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5816 = CARTESIAN_POINT('',(0.361963692185,0.541055388448));+#5817 = CARTESIAN_POINT('',(0.339754431698,0.600122570593));+#5818 = CARTESIAN_POINT('',(0.291083073611,0.600122570593));+#5819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5820 = SHELL_BASED_SURFACE_MODEL('',(#5821));+#5821 = OPEN_SHELL('',(#5822));+#5822 = ADVANCED_FACE('',(#5823),#5837,.T.);+#5823 = FACE_BOUND('',#5824,.F.);+#5824 = EDGE_LOOP('',(#5825,#5848,#5864,#5880,#5896,#5912,#5928,#5944,+    #5960,#5976,#5992));+#5825 = ORIENTED_EDGE('',*,*,#5826,.T.);+#5826 = EDGE_CURVE('',#5827,#5829,#5831,.T.);+#5827 = VERTEX_POINT('',#5828);+#5828 = CARTESIAN_POINT('',(-1.064389992354,2.708348435711,10.505));+#5829 = VERTEX_POINT('',#5830);+#5830 = CARTESIAN_POINT('',(-1.187249731215,2.708348435711,10.505));+#5831 = SURFACE_CURVE('',#5832,(#5836),.PCURVE_S1.);+#5832 = LINE('',#5833,#5834);+#5833 = CARTESIAN_POINT('',(-1.064389992354,2.708348435711,10.505));+#5834 = VECTOR('',#5835,1.);+#5835 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5836 = PCURVE('',#5837,#5842);+#5837 = PLANE('',#5838);+#5838 = AXIS2_PLACEMENT_3D('',#5839,#5840,#5841);+#5839 = CARTESIAN_POINT('',(-1.064389992354,2.619511393765,10.505));+#5840 = DIRECTION('',(0.,0.,1.));+#5841 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#5842 = DEFINITIONAL_REPRESENTATION('',(#5843),#5847);+#5843 = LINE('',#5844,#5845);+#5844 = CARTESIAN_POINT('',(8.8837041946E-02,9.862892940803E-18));+#5845 = VECTOR('',#5846,1.);+#5846 = DIRECTION('',(0.,1.));+#5847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5848 = ORIENTED_EDGE('',*,*,#5849,.T.);+#5849 = EDGE_CURVE('',#5829,#5850,#5852,.T.);+#5850 = VERTEX_POINT('',#5851);+#5851 = CARTESIAN_POINT('',(-1.187249731215,2.864285796574,10.505));+#5852 = SURFACE_CURVE('',#5853,(#5857),.PCURVE_S1.);+#5853 = LINE('',#5854,#5855);+#5854 = CARTESIAN_POINT('',(-1.187249731215,2.708348435711,10.505));+#5855 = VECTOR('',#5856,1.);+#5856 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5857 = PCURVE('',#5837,#5858);+#5858 = DEFINITIONAL_REPRESENTATION('',(#5859),#5863);+#5859 = LINE('',#5860,#5861);+#5860 = CARTESIAN_POINT('',(8.8837041946E-02,0.122859738861));+#5861 = VECTOR('',#5862,1.);+#5862 = DIRECTION('',(1.,0.));+#5863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5864 = ORIENTED_EDGE('',*,*,#5865,.T.);+#5865 = EDGE_CURVE('',#5850,#5866,#5868,.T.);+#5866 = VERTEX_POINT('',#5867);+#5867 = CARTESIAN_POINT('',(-1.645138527203,2.864285796574,10.505));+#5868 = SURFACE_CURVE('',#5869,(#5873),.PCURVE_S1.);+#5869 = LINE('',#5870,#5871);+#5870 = CARTESIAN_POINT('',(-1.187249731215,2.864285796574,10.505));+#5871 = VECTOR('',#5872,1.);+#5872 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5873 = PCURVE('',#5837,#5874);+#5874 = DEFINITIONAL_REPRESENTATION('',(#5875),#5879);+#5875 = LINE('',#5876,#5877);+#5876 = CARTESIAN_POINT('',(0.244774402809,0.122859738861));+#5877 = VECTOR('',#5878,1.);+#5878 = DIRECTION('',(0.,1.));+#5879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5880 = ORIENTED_EDGE('',*,*,#5881,.T.);+#5881 = EDGE_CURVE('',#5866,#5882,#5884,.T.);+#5882 = VERTEX_POINT('',#5883);+#5883 = CARTESIAN_POINT('',(-1.609225680459,2.719216797226,10.505));+#5884 = SURFACE_CURVE('',#5885,(#5889),.PCURVE_S1.);+#5885 = LINE('',#5886,#5887);+#5886 = CARTESIAN_POINT('',(-1.645138527203,2.864285796574,10.505));+#5887 = VECTOR('',#5888,1.);+#5888 = DIRECTION('',(0.240303066167,-0.970697912015,0.));+#5889 = PCURVE('',#5837,#5890);+#5890 = DEFINITIONAL_REPRESENTATION('',(#5891),#5895);+#5891 = LINE('',#5892,#5893);+#5892 = CARTESIAN_POINT('',(0.244774402809,0.580748534849));+#5893 = VECTOR('',#5894,1.);+#5894 = DIRECTION('',(-0.970697912015,-0.240303066167));+#5895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5896 = ORIENTED_EDGE('',*,*,#5897,.T.);+#5897 = EDGE_CURVE('',#5882,#5898,#5900,.T.);+#5898 = VERTEX_POINT('',#5899);+#5899 = CARTESIAN_POINT('',(-1.734920644064,2.719216797226,10.505));+#5900 = SURFACE_CURVE('',#5901,(#5905),.PCURVE_S1.);+#5901 = LINE('',#5902,#5903);+#5902 = CARTESIAN_POINT('',(-1.609225680459,2.719216797226,10.505));+#5903 = VECTOR('',#5904,1.);+#5904 = DIRECTION('',(-1.,1.110223024625E-16,0.));+#5905 = PCURVE('',#5837,#5906);+#5906 = DEFINITIONAL_REPRESENTATION('',(#5907),#5911);+#5907 = LINE('',#5908,#5909);+#5908 = CARTESIAN_POINT('',(9.9705403461E-02,0.544835688105));+#5909 = VECTOR('',#5910,1.);+#5910 = DIRECTION('',(0.,1.));+#5911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5912 = ORIENTED_EDGE('',*,*,#5913,.T.);+#5913 = EDGE_CURVE('',#5898,#5914,#5916,.T.);+#5914 = VERTEX_POINT('',#5915);+#5915 = CARTESIAN_POINT('',(-1.769888415893,2.865230871488,10.505));+#5916 = SURFACE_CURVE('',#5917,(#5921),.PCURVE_S1.);+#5917 = LINE('',#5918,#5919);+#5918 = CARTESIAN_POINT('',(-1.734920644064,2.719216797226,10.505));+#5919 = VECTOR('',#5920,1.);+#5920 = DIRECTION('',(-0.232896789262,0.972501457866,0.));+#5921 = PCURVE('',#5837,#5922);+#5922 = DEFINITIONAL_REPRESENTATION('',(#5923),#5927);+#5923 = LINE('',#5924,#5925);+#5924 = CARTESIAN_POINT('',(9.9705403461E-02,0.67053065171));+#5925 = VECTOR('',#5926,1.);+#5926 = DIRECTION('',(0.972501457866,0.232896789262));+#5927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5928 = ORIENTED_EDGE('',*,*,#5929,.T.);+#5929 = EDGE_CURVE('',#5914,#5930,#5932,.T.);+#5930 = VERTEX_POINT('',#5931);+#5931 = CARTESIAN_POINT('',(-1.769888415893,2.999904046779,10.505));+#5932 = SURFACE_CURVE('',#5933,(#5937),.PCURVE_S1.);+#5933 = LINE('',#5934,#5935);+#5934 = CARTESIAN_POINT('',(-1.769888415893,2.865230871488,10.505));+#5935 = VECTOR('',#5936,1.);+#5936 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5937 = PCURVE('',#5837,#5938);+#5938 = DEFINITIONAL_REPRESENTATION('',(#5939),#5943);+#5939 = LINE('',#5940,#5941);+#5940 = CARTESIAN_POINT('',(0.245719477723,0.705498423539));+#5941 = VECTOR('',#5942,1.);+#5942 = DIRECTION('',(1.,0.));+#5943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5944 = ORIENTED_EDGE('',*,*,#5945,.T.);+#5945 = EDGE_CURVE('',#5930,#5946,#5948,.T.);+#5946 = VERTEX_POINT('',#5947);+#5947 = CARTESIAN_POINT('',(-1.187249731215,2.999904046779,10.505));+#5948 = SURFACE_CURVE('',#5949,(#5953),.PCURVE_S1.);+#5949 = LINE('',#5950,#5951);+#5950 = CARTESIAN_POINT('',(-1.769888415893,2.999904046779,10.505));+#5951 = VECTOR('',#5952,1.);+#5952 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5953 = PCURVE('',#5837,#5954);+#5954 = DEFINITIONAL_REPRESENTATION('',(#5955),#5959);+#5955 = LINE('',#5956,#5957);+#5956 = CARTESIAN_POINT('',(0.380392653014,0.705498423539));+#5957 = VECTOR('',#5958,1.);+#5958 = DIRECTION('',(0.,-1.));+#5959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5960 = ORIENTED_EDGE('',*,*,#5961,.T.);+#5961 = EDGE_CURVE('',#5946,#5962,#5964,.T.);+#5962 = VERTEX_POINT('',#5963);+#5963 = CARTESIAN_POINT('',(-1.187249731215,3.155841407642,10.505));+#5964 = SURFACE_CURVE('',#5965,(#5969),.PCURVE_S1.);+#5965 = LINE('',#5966,#5967);+#5966 = CARTESIAN_POINT('',(-1.187249731215,2.999904046779,10.505));+#5967 = VECTOR('',#5968,1.);+#5968 = DIRECTION('',(1.110223024625E-16,1.,0.));+#5969 = PCURVE('',#5837,#5970);+#5970 = DEFINITIONAL_REPRESENTATION('',(#5971),#5975);+#5971 = LINE('',#5972,#5973);+#5972 = CARTESIAN_POINT('',(0.380392653014,0.122859738861));+#5973 = VECTOR('',#5974,1.);+#5974 = DIRECTION('',(1.,0.));+#5975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5976 = ORIENTED_EDGE('',*,*,#5977,.T.);+#5977 = EDGE_CURVE('',#5962,#5978,#5980,.T.);+#5978 = VERTEX_POINT('',#5979);+#5979 = CARTESIAN_POINT('',(-1.064389992354,3.155841407642,10.505));+#5980 = SURFACE_CURVE('',#5981,(#5985),.PCURVE_S1.);+#5981 = LINE('',#5982,#5983);+#5982 = CARTESIAN_POINT('',(-1.187249731215,3.155841407642,10.505));+#5983 = VECTOR('',#5984,1.);+#5984 = DIRECTION('',(1.,-1.110223024625E-16,0.));+#5985 = PCURVE('',#5837,#5986);+#5986 = DEFINITIONAL_REPRESENTATION('',(#5987),#5991);+#5987 = LINE('',#5988,#5989);+#5988 = CARTESIAN_POINT('',(0.536330013877,0.122859738861));+#5989 = VECTOR('',#5990,1.);+#5990 = DIRECTION('',(0.,-1.));+#5991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#5992 = ORIENTED_EDGE('',*,*,#5993,.T.);+#5993 = EDGE_CURVE('',#5978,#5827,#5994,.T.);+#5994 = SURFACE_CURVE('',#5995,(#5999),.PCURVE_S1.);+#5995 = LINE('',#5996,#5997);+#5996 = CARTESIAN_POINT('',(-1.064389992354,3.155841407642,10.505));+#5997 = VECTOR('',#5998,1.);+#5998 = DIRECTION('',(-1.110223024625E-16,-1.,0.));+#5999 = PCURVE('',#5837,#6000);+#6000 = DEFINITIONAL_REPRESENTATION('',(#6001),#6005);+#6001 = LINE('',#6002,#6003);+#6002 = CARTESIAN_POINT('',(0.536330013877,5.954459302037E-17));+#6003 = VECTOR('',#6004,1.);+#6004 = DIRECTION('',(-1.,0.));+#6005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6006 = SHELL_BASED_SURFACE_MODEL('',(#6007));+#6007 = OPEN_SHELL('',(#6008));+#6008 = ADVANCED_FACE('',(#6009),#6023,.T.);+#6009 = FACE_BOUND('',#6010,.F.);+#6010 = EDGE_LOOP('',(#6011,#6034,#6050,#6066,#6082,#6098,#6114,#6130));+#6011 = ORIENTED_EDGE('',*,*,#6012,.T.);+#6012 = EDGE_CURVE('',#6013,#6015,#6017,.T.);+#6013 = VERTEX_POINT('',#6014);+#6014 = CARTESIAN_POINT('',(-1.416430397938,3.434638507366,10.505));+#6015 = VERTEX_POINT('',#6016);+#6016 = CARTESIAN_POINT('',(-1.458486231625,3.451649855824,10.505));+#6017 = SURFACE_CURVE('',#6018,(#6022),.PCURVE_S1.);+#6018 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6019,#6020,#6021),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6019 = CARTESIAN_POINT('',(-1.416430397938,3.434638507366,10.505));+#6020 = CARTESIAN_POINT('',(-1.441474883167,3.434638507366,10.505));+#6021 = CARTESIAN_POINT('',(-1.458486231625,3.451649855824,10.505));+#6022 = PCURVE('',#6023,#6028);+#6023 = PLANE('',#6024);+#6024 = AXIS2_PLACEMENT_3D('',#6025,#6026,#6027);+#6025 = CARTESIAN_POINT('',(-1.064389992354,3.202150078443,10.505));+#6026 = DIRECTION('',(0.,0.,1.));+#6027 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#6028 = DEFINITIONAL_REPRESENTATION('',(#6029),#6033);+#6029 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6030,#6031,#6032),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6030 = CARTESIAN_POINT('',(0.232488428923,0.352040405584));+#6031 = CARTESIAN_POINT('',(0.232488428923,0.377084890813));+#6032 = CARTESIAN_POINT('',(0.249499777381,0.394096239271));+#6033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6034 = ORIENTED_EDGE('',*,*,#6035,.T.);+#6035 = EDGE_CURVE('',#6015,#6036,#6038,.T.);+#6036 = VERTEX_POINT('',#6037);+#6037 = CARTESIAN_POINT('',(-1.475497580083,3.493233152054,10.505));+#6038 = SURFACE_CURVE('',#6039,(#6043),.PCURVE_S1.);+#6039 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6040,#6041,#6042),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6040 = CARTESIAN_POINT('',(-1.458486231625,3.451649855824,10.505));+#6041 = CARTESIAN_POINT('',(-1.475497580083,3.468661204281,10.505));+#6042 = CARTESIAN_POINT('',(-1.475497580083,3.493233152054,10.505));+#6043 = PCURVE('',#6023,#6044);+#6044 = DEFINITIONAL_REPRESENTATION('',(#6045),#6049);+#6045 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6046,#6047,#6048),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6046 = CARTESIAN_POINT('',(0.249499777381,0.394096239271));+#6047 = CARTESIAN_POINT('',(0.266511125838,0.411107587729));+#6048 = CARTESIAN_POINT('',(0.291083073611,0.411107587729));+#6049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6050 = ORIENTED_EDGE('',*,*,#6051,.T.);+#6051 = EDGE_CURVE('',#6036,#6052,#6054,.T.);+#6052 = VERTEX_POINT('',#6053);+#6053 = CARTESIAN_POINT('',(-1.458486231625,3.535288985741,10.505));+#6054 = SURFACE_CURVE('',#6055,(#6059),.PCURVE_S1.);+#6055 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6056,#6057,#6058),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6056 = CARTESIAN_POINT('',(-1.475497580083,3.493233152054,10.505));+#6057 = CARTESIAN_POINT('',(-1.475497580083,3.518277637283,10.505));+#6058 = CARTESIAN_POINT('',(-1.458486231625,3.535288985741,10.505));+#6059 = PCURVE('',#6023,#6060);+#6060 = DEFINITIONAL_REPRESENTATION('',(#6061),#6065);+#6061 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6062,#6063,#6064),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6062 = CARTESIAN_POINT('',(0.291083073611,0.411107587729));+#6063 = CARTESIAN_POINT('',(0.31612755884,0.411107587729));+#6064 = CARTESIAN_POINT('',(0.333138907298,0.394096239271));+#6065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6066 = ORIENTED_EDGE('',*,*,#6067,.T.);+#6067 = EDGE_CURVE('',#6052,#6068,#6070,.T.);+#6068 = VERTEX_POINT('',#6069);+#6069 = CARTESIAN_POINT('',(-1.416430397938,3.552300334199,10.505));+#6070 = SURFACE_CURVE('',#6071,(#6075),.PCURVE_S1.);+#6071 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6072,#6073,#6074),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6072 = CARTESIAN_POINT('',(-1.458486231625,3.535288985741,10.505));+#6073 = CARTESIAN_POINT('',(-1.441474883167,3.552300334199,10.505));+#6074 = CARTESIAN_POINT('',(-1.416430397938,3.552300334199,10.505));+#6075 = PCURVE('',#6023,#6076);+#6076 = DEFINITIONAL_REPRESENTATION('',(#6077),#6081);+#6077 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6078,#6079,#6080),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6078 = CARTESIAN_POINT('',(0.333138907298,0.394096239271));+#6079 = CARTESIAN_POINT('',(0.350150255756,0.377084890813));+#6080 = CARTESIAN_POINT('',(0.350150255756,0.352040405584));+#6081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6082 = ORIENTED_EDGE('',*,*,#6083,.T.);+#6083 = EDGE_CURVE('',#6068,#6084,#6086,.T.);+#6084 = VERTEX_POINT('',#6085);+#6085 = CARTESIAN_POINT('',(-1.374847101708,3.535288985741,10.505));+#6086 = SURFACE_CURVE('',#6087,(#6091),.PCURVE_S1.);+#6087 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6088,#6089,#6090),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6088 = CARTESIAN_POINT('',(-1.416430397938,3.552300334199,10.505));+#6089 = CARTESIAN_POINT('',(-1.391858450166,3.552300334199,10.505));+#6090 = CARTESIAN_POINT('',(-1.374847101708,3.535288985741,10.505));+#6091 = PCURVE('',#6023,#6092);+#6092 = DEFINITIONAL_REPRESENTATION('',(#6093),#6097);+#6093 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6094,#6095,#6096),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6094 = CARTESIAN_POINT('',(0.350150255756,0.352040405584));+#6095 = CARTESIAN_POINT('',(0.350150255756,0.327468457812));+#6096 = CARTESIAN_POINT('',(0.333138907298,0.310457109354));+#6097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6098 = ORIENTED_EDGE('',*,*,#6099,.T.);+#6099 = EDGE_CURVE('',#6084,#6100,#6102,.T.);+#6100 = VERTEX_POINT('',#6101);+#6101 = CARTESIAN_POINT('',(-1.35783575325,3.493233152054,10.505));+#6102 = SURFACE_CURVE('',#6103,(#6107),.PCURVE_S1.);+#6103 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6104,#6105,#6106),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6104 = CARTESIAN_POINT('',(-1.374847101708,3.535288985741,10.505));+#6105 = CARTESIAN_POINT('',(-1.35783575325,3.518277637283,10.505));+#6106 = CARTESIAN_POINT('',(-1.35783575325,3.493233152054,10.505));+#6107 = PCURVE('',#6023,#6108);+#6108 = DEFINITIONAL_REPRESENTATION('',(#6109),#6113);+#6109 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6110,#6111,#6112),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6110 = CARTESIAN_POINT('',(0.333138907298,0.310457109354));+#6111 = CARTESIAN_POINT('',(0.31612755884,0.293445760896));+#6112 = CARTESIAN_POINT('',(0.291083073611,0.293445760896));+#6113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6114 = ORIENTED_EDGE('',*,*,#6115,.T.);+#6115 = EDGE_CURVE('',#6100,#6116,#6118,.T.);+#6116 = VERTEX_POINT('',#6117);+#6117 = CARTESIAN_POINT('',(-1.374610832979,3.451649855824,10.505));+#6118 = SURFACE_CURVE('',#6119,(#6123),.PCURVE_S1.);+#6119 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6120,#6121,#6122),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6120 = CARTESIAN_POINT('',(-1.35783575325,3.493233152054,10.505));+#6121 = CARTESIAN_POINT('',(-1.35783575325,3.468661204281,10.505));+#6122 = CARTESIAN_POINT('',(-1.374610832979,3.451649855824,10.505));+#6123 = PCURVE('',#6023,#6124);+#6124 = DEFINITIONAL_REPRESENTATION('',(#6125),#6129);+#6125 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6126,#6127,#6128),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6126 = CARTESIAN_POINT('',(0.291083073611,0.293445760896));+#6127 = CARTESIAN_POINT('',(0.266511125838,0.293445760896));+#6128 = CARTESIAN_POINT('',(0.249499777381,0.310220840625));+#6129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6130 = ORIENTED_EDGE('',*,*,#6131,.T.);+#6131 = EDGE_CURVE('',#6116,#6013,#6132,.T.);+#6132 = SURFACE_CURVE('',#6133,(#6137),.PCURVE_S1.);+#6133 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6134,#6135,#6136),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6134 = CARTESIAN_POINT('',(-1.374610832979,3.451649855824,10.505));+#6135 = CARTESIAN_POINT('',(-1.391385912708,3.434638507366,10.505));+#6136 = CARTESIAN_POINT('',(-1.416430397938,3.434638507366,10.505));+#6137 = PCURVE('',#6023,#6138);+#6138 = DEFINITIONAL_REPRESENTATION('',(#6139),#6143);+#6139 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6140,#6141,#6142),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6140 = CARTESIAN_POINT('',(0.249499777381,0.310220840625));+#6141 = CARTESIAN_POINT('',(0.232488428923,0.326995920354));+#6142 = CARTESIAN_POINT('',(0.232488428923,0.352040405584));+#6143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6144 = SHELL_BASED_SURFACE_MODEL('',(#6145));+#6145 = OPEN_SHELL('',(#6146));+#6146 = ADVANCED_FACE('',(#6147,#6282),#6161,.T.);+#6147 = FACE_BOUND('',#6148,.F.);+#6148 = EDGE_LOOP('',(#6149,#6172,#6188,#6204,#6220,#6236,#6252,#6268));+#6149 = ORIENTED_EDGE('',*,*,#6150,.T.);+#6150 = EDGE_CURVE('',#6151,#6153,#6155,.T.);+#6151 = VERTEX_POINT('',#6152);+#6152 = CARTESIAN_POINT('',(-1.416430397938,3.260272185674,10.505));+#6153 = VERTEX_POINT('',#6154);+#6154 = CARTESIAN_POINT('',(-1.691210929276,3.318394292905,10.505));+#6155 = SURFACE_CURVE('',#6156,(#6160),.PCURVE_S1.);+#6156 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6157,#6158,#6159),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6157 = CARTESIAN_POINT('',(-1.416430397938,3.260272185674,10.505));+#6158 = CARTESIAN_POINT('',(-1.599774931316,3.260272185674,10.505));+#6159 = CARTESIAN_POINT('',(-1.691210929276,3.318394292905,10.505));+#6160 = PCURVE('',#6161,#6166);+#6161 = PLANE('',#6162);+#6162 = AXIS2_PLACEMENT_3D('',#6163,#6164,#6165);+#6163 = CARTESIAN_POINT('',(-1.064389992354,3.202150078443,10.505));+#6164 = DIRECTION('',(0.,0.,1.));+#6165 = DIRECTION('',(1.110223024625E-16,1.,-0.));+#6166 = DEFINITIONAL_REPRESENTATION('',(#6167),#6171);+#6167 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6168,#6169,#6170),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6168 = CARTESIAN_POINT('',(5.8122107231E-02,0.352040405584));+#6169 = CARTESIAN_POINT('',(5.8122107231E-02,0.535384938962));+#6170 = CARTESIAN_POINT('',(0.116244214462,0.626820936922));+#6171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6172 = ORIENTED_EDGE('',*,*,#6173,.T.);+#6173 = EDGE_CURVE('',#6153,#6174,#6176,.T.);+#6174 = VERTEX_POINT('',#6175);+#6175 = CARTESIAN_POINT('',(-1.782646927237,3.493233152054,10.505));+#6176 = SURFACE_CURVE('',#6177,(#6181),.PCURVE_S1.);+#6177 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6178,#6179,#6180),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6178 = CARTESIAN_POINT('',(-1.691210929276,3.318394292905,10.505));+#6179 = CARTESIAN_POINT('',(-1.782646927237,3.376516400135,10.505));+#6180 = CARTESIAN_POINT('',(-1.782646927237,3.493233152054,10.505));+#6181 = PCURVE('',#6161,#6182);+#6182 = DEFINITIONAL_REPRESENTATION('',(#6183),#6187);+#6183 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6184,#6185,#6186),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6184 = CARTESIAN_POINT('',(0.116244214462,0.626820936922));+#6185 = CARTESIAN_POINT('',(0.174366321692,0.718256934883));+#6186 = CARTESIAN_POINT('',(0.291083073611,0.718256934883));+#6187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6188 = ORIENTED_EDGE('',*,*,#6189,.T.);+#6189 = EDGE_CURVE('',#6174,#6190,#6192,.T.);+#6190 = VERTEX_POINT('',#6191);+#6191 = CARTESIAN_POINT('',(-1.691447198005,3.66854454866,10.505));+#6192 = SURFACE_CURVE('',#6193,(#6197),.PCURVE_S1.);+#6193 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6194,#6195,#6196),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6194 = CARTESIAN_POINT('',(-1.782646927237,3.493233152054,10.505));+#6195 = CARTESIAN_POINT('',(-1.782646927237,3.610422441429,10.505));+#6196 = CARTESIAN_POINT('',(-1.691447198005,3.66854454866,10.505));+#6197 = PCURVE('',#6161,#6198);+#6198 = DEFINITIONAL_REPRESENTATION('',(#6199),#6203);+#6199 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6200,#6201,#6202),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6200 = CARTESIAN_POINT('',(0.291083073611,0.718256934883));+#6201 = CARTESIAN_POINT('',(0.408272362986,0.718256934883));+#6202 = CARTESIAN_POINT('',(0.466394470217,0.627057205651));+#6203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6204 = ORIENTED_EDGE('',*,*,#6205,.T.);+#6205 = EDGE_CURVE('',#6190,#6206,#6208,.T.);+#6206 = VERTEX_POINT('',#6207);+#6207 = CARTESIAN_POINT('',(-1.416430397938,3.726666655891,10.505));+#6208 = SURFACE_CURVE('',#6209,(#6213),.PCURVE_S1.);+#6209 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6210,#6211,#6212),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6210 = CARTESIAN_POINT('',(-1.691447198005,3.66854454866,10.505));+#6211 = CARTESIAN_POINT('',(-1.600247468773,3.726666655891,10.505));+#6212 = CARTESIAN_POINT('',(-1.416430397938,3.726666655891,10.505));+#6213 = PCURVE('',#6161,#6214);+#6214 = DEFINITIONAL_REPRESENTATION('',(#6215),#6219);+#6215 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6216,#6217,#6218),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6216 = CARTESIAN_POINT('',(0.466394470217,0.627057205651));+#6217 = CARTESIAN_POINT('',(0.524516577448,0.535857476419));+#6218 = CARTESIAN_POINT('',(0.524516577448,0.352040405584));+#6219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6220 = ORIENTED_EDGE('',*,*,#6221,.T.);+#6221 = EDGE_CURVE('',#6206,#6222,#6224,.T.);+#6222 = VERTEX_POINT('',#6223);+#6223 = CARTESIAN_POINT('',(-1.141886135328,3.66854454866,10.505));+#6224 = SURFACE_CURVE('',#6225,(#6229),.PCURVE_S1.);+#6225 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6226,#6227,#6228),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6226 = CARTESIAN_POINT('',(-1.416430397938,3.726666655891,10.505));+#6227 = CARTESIAN_POINT('',(-1.23308586456,3.726666655891,10.505));+#6228 = CARTESIAN_POINT('',(-1.141886135328,3.66854454866,10.505));+#6229 = PCURVE('',#6161,#6230);+#6230 = DEFINITIONAL_REPRESENTATION('',(#6231),#6235);+#6231 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6232,#6233,#6234),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6232 = CARTESIAN_POINT('',(0.524516577448,0.352040405584));+#6233 = CARTESIAN_POINT('',(0.524516577448,0.168695872206));+#6234 = CARTESIAN_POINT('',(0.466394470217,7.7496142974E-02));+#6235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6236 = ORIENTED_EDGE('',*,*,#6237,.T.);+#6237 = EDGE_CURVE('',#6222,#6238,#6240,.T.);+#6238 = VERTEX_POINT('',#6239);+#6239 = CARTESIAN_POINT('',(-1.050686406096,3.493233152054,10.505));+#6240 = SURFACE_CURVE('',#6241,(#6245),.PCURVE_S1.);+#6241 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6242,#6243,#6244),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6242 = CARTESIAN_POINT('',(-1.141886135328,3.66854454866,10.505));+#6243 = CARTESIAN_POINT('',(-1.050686406096,3.610422441429,10.505));+#6244 = CARTESIAN_POINT('',(-1.050686406096,3.493233152054,10.505));+#6245 = PCURVE('',#6161,#6246);+#6246 = DEFINITIONAL_REPRESENTATION('',(#6247),#6251);+#6247 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6248,#6249,#6250),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6248 = CARTESIAN_POINT('',(0.466394470217,7.7496142974E-02));+#6249 = CARTESIAN_POINT('',(0.408272362986,-1.3703586258E-02));+#6250 = CARTESIAN_POINT('',(0.291083073611,-1.3703586258E-02));+#6251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6252 = ORIENTED_EDGE('',*,*,#6253,.T.);+#6253 = EDGE_CURVE('',#6238,#6254,#6256,.T.);+#6254 = VERTEX_POINT('',#6255);+#6255 = CARTESIAN_POINT('',(-1.142122404057,3.318394292905,10.505));+#6256 = SURFACE_CURVE('',#6257,(#6261),.PCURVE_S1.);+#6257 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6258,#6259,#6260),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6258 = CARTESIAN_POINT('',(-1.050686406096,3.493233152054,10.505));+#6259 = CARTESIAN_POINT('',(-1.050686406096,3.376516400135,10.505));+#6260 = CARTESIAN_POINT('',(-1.142122404057,3.318394292905,10.505));+#6261 = PCURVE('',#6161,#6262);+#6262 = DEFINITIONAL_REPRESENTATION('',(#6263),#6267);+#6263 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6264,#6265,#6266),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6264 = CARTESIAN_POINT('',(0.291083073611,-1.3703586258E-02));+#6265 = CARTESIAN_POINT('',(0.174366321692,-1.3703586258E-02));+#6266 = CARTESIAN_POINT('',(0.116244214462,7.7732411703E-02));+#6267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6268 = ORIENTED_EDGE('',*,*,#6269,.T.);+#6269 = EDGE_CURVE('',#6254,#6151,#6270,.T.);+#6270 = SURFACE_CURVE('',#6271,(#6275),.PCURVE_S1.);+#6271 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6272,#6273,#6274),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6272 = CARTESIAN_POINT('',(-1.142122404057,3.318394292905,10.505));+#6273 = CARTESIAN_POINT('',(-1.233558402017,3.260272185674,10.505));+#6274 = CARTESIAN_POINT('',(-1.416430397938,3.260272185674,10.505));+#6275 = PCURVE('',#6161,#6276);+#6276 = DEFINITIONAL_REPRESENTATION('',(#6277),#6281);+#6277 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6278,#6279,#6280),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6278 = CARTESIAN_POINT('',(0.116244214462,7.7732411703E-02));+#6279 = CARTESIAN_POINT('',(5.8122107231E-02,0.169168409663));+#6280 = CARTESIAN_POINT('',(5.8122107231E-02,0.352040405584));+#6281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6282 = FACE_BOUND('',#6283,.F.);+#6283 = EDGE_LOOP('',(#6284,#6302,#6318,#6334,#6350,#6366,#6382,#6398));+#6284 = ORIENTED_EDGE('',*,*,#6285,.T.);+#6285 = EDGE_CURVE('',#6286,#6288,#6290,.T.);+#6286 = VERTEX_POINT('',#6287);+#6287 = CARTESIAN_POINT('',(-1.664512562947,3.493233152054,10.505));+#6288 = VERTEX_POINT('',#6289);+#6289 = CARTESIAN_POINT('',(-1.605445380802,3.422825070937,10.505));+#6290 = SURFACE_CURVE('',#6291,(#6295),.PCURVE_S1.);+#6291 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6292,#6293,#6294),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6292 = CARTESIAN_POINT('',(-1.664512562947,3.493233152054,10.505));+#6293 = CARTESIAN_POINT('',(-1.664512562947,3.445034331423,10.505));+#6294 = CARTESIAN_POINT('',(-1.605445380802,3.422825070937,10.505));+#6295 = PCURVE('',#6161,#6296);+#6296 = DEFINITIONAL_REPRESENTATION('',(#6297),#6301);+#6297 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6298,#6299,#6300),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6298 = CARTESIAN_POINT('',(0.291083073611,0.600122570593));+#6299 = CARTESIAN_POINT('',(0.24288425298,0.600122570593));+#6300 = CARTESIAN_POINT('',(0.220674992494,0.541055388448));+#6301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6302 = ORIENTED_EDGE('',*,*,#6303,.T.);+#6303 = EDGE_CURVE('',#6288,#6304,#6306,.T.);+#6304 = VERTEX_POINT('',#6305);+#6305 = CARTESIAN_POINT('',(-1.416430397938,3.40061581045,10.505));+#6306 = SURFACE_CURVE('',#6307,(#6311),.PCURVE_S1.);+#6307 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6308,#6309,#6310),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6308 = CARTESIAN_POINT('',(-1.605445380802,3.422825070937,10.505));+#6309 = CARTESIAN_POINT('',(-1.546378198657,3.40061581045,10.505));+#6310 = CARTESIAN_POINT('',(-1.416430397938,3.40061581045,10.505));+#6311 = PCURVE('',#6161,#6312);+#6312 = DEFINITIONAL_REPRESENTATION('',(#6313),#6317);+#6313 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6314,#6315,#6316),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6314 = CARTESIAN_POINT('',(0.220674992494,0.541055388448));+#6315 = CARTESIAN_POINT('',(0.198465732007,0.481988206303));+#6316 = CARTESIAN_POINT('',(0.198465732007,0.352040405584));+#6317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6318 = ORIENTED_EDGE('',*,*,#6319,.T.);+#6319 = EDGE_CURVE('',#6304,#6320,#6322,.T.);+#6320 = VERTEX_POINT('',#6321);+#6321 = CARTESIAN_POINT('',(-1.227887952531,3.422825070937,10.505));+#6322 = SURFACE_CURVE('',#6323,(#6327),.PCURVE_S1.);+#6323 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6324,#6325,#6326),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6324 = CARTESIAN_POINT('',(-1.416430397938,3.40061581045,10.505));+#6325 = CARTESIAN_POINT('',(-1.286955134676,3.40061581045,10.505));+#6326 = CARTESIAN_POINT('',(-1.227887952531,3.422825070937,10.505));+#6327 = PCURVE('',#6161,#6328);+#6328 = DEFINITIONAL_REPRESENTATION('',(#6329),#6333);+#6329 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6330,#6331,#6332),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6330 = CARTESIAN_POINT('',(0.198465732007,0.352040405584));+#6331 = CARTESIAN_POINT('',(0.198465732007,0.222565142322));+#6332 = CARTESIAN_POINT('',(0.220674992494,0.163497960177));+#6333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6334 = ORIENTED_EDGE('',*,*,#6335,.T.);+#6335 = EDGE_CURVE('',#6320,#6336,#6338,.T.);+#6336 = VERTEX_POINT('',#6337);+#6337 = CARTESIAN_POINT('',(-1.168820770386,3.493233152054,10.505));+#6338 = SURFACE_CURVE('',#6339,(#6343),.PCURVE_S1.);+#6339 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6340,#6341,#6342),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6340 = CARTESIAN_POINT('',(-1.227887952531,3.422825070937,10.505));+#6341 = CARTESIAN_POINT('',(-1.168820770386,3.445034331423,10.505));+#6342 = CARTESIAN_POINT('',(-1.168820770386,3.493233152054,10.505));+#6343 = PCURVE('',#6161,#6344);+#6344 = DEFINITIONAL_REPRESENTATION('',(#6345),#6349);+#6345 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6346,#6347,#6348),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6346 = CARTESIAN_POINT('',(0.220674992494,0.163497960177));+#6347 = CARTESIAN_POINT('',(0.24288425298,0.104430778032));+#6348 = CARTESIAN_POINT('',(0.291083073611,0.104430778032));+#6349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6350 = ORIENTED_EDGE('',*,*,#6351,.T.);+#6351 = EDGE_CURVE('',#6336,#6352,#6354,.T.);+#6352 = VERTEX_POINT('',#6353);+#6353 = CARTESIAN_POINT('',(-1.227887952531,3.564113770628,10.505));+#6354 = SURFACE_CURVE('',#6355,(#6359),.PCURVE_S1.);+#6355 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6356,#6357,#6358),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6356 = CARTESIAN_POINT('',(-1.168820770386,3.493233152054,10.505));+#6357 = CARTESIAN_POINT('',(-1.168820770386,3.541904510141,10.505));+#6358 = CARTESIAN_POINT('',(-1.227887952531,3.564113770628,10.505));+#6359 = PCURVE('',#6161,#6360);+#6360 = DEFINITIONAL_REPRESENTATION('',(#6361),#6365);+#6361 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6362,#6363,#6364),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6362 = CARTESIAN_POINT('',(0.291083073611,0.104430778032));+#6363 = CARTESIAN_POINT('',(0.339754431698,0.104430778032));+#6364 = CARTESIAN_POINT('',(0.361963692185,0.163497960177));+#6365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6366 = ORIENTED_EDGE('',*,*,#6367,.T.);+#6367 = EDGE_CURVE('',#6352,#6368,#6370,.T.);+#6368 = VERTEX_POINT('',#6369);+#6369 = CARTESIAN_POINT('',(-1.416430397938,3.586323031114,10.505));+#6370 = SURFACE_CURVE('',#6371,(#6375),.PCURVE_S1.);+#6371 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6372,#6373,#6374),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6372 = CARTESIAN_POINT('',(-1.227887952531,3.564113770628,10.505));+#6373 = CARTESIAN_POINT('',(-1.286955134676,3.586323031114,10.505));+#6374 = CARTESIAN_POINT('',(-1.416430397938,3.586323031114,10.505));+#6375 = PCURVE('',#6161,#6376);+#6376 = DEFINITIONAL_REPRESENTATION('',(#6377),#6381);+#6377 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6378,#6379,#6380),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6378 = CARTESIAN_POINT('',(0.361963692185,0.163497960177));+#6379 = CARTESIAN_POINT('',(0.384172952671,0.222565142322));+#6380 = CARTESIAN_POINT('',(0.384172952671,0.352040405584));+#6381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6382 = ORIENTED_EDGE('',*,*,#6383,.T.);+#6383 = EDGE_CURVE('',#6368,#6384,#6386,.T.);+#6384 = VERTEX_POINT('',#6385);+#6385 = CARTESIAN_POINT('',(-1.605445380802,3.564113770628,10.505));+#6386 = SURFACE_CURVE('',#6387,(#6391),.PCURVE_S1.);+#6387 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6388,#6389,#6390),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6388 = CARTESIAN_POINT('',(-1.416430397938,3.586323031114,10.505));+#6389 = CARTESIAN_POINT('',(-1.546378198657,3.586323031114,10.505));+#6390 = CARTESIAN_POINT('',(-1.605445380802,3.564113770628,10.505));+#6391 = PCURVE('',#6161,#6392);+#6392 = DEFINITIONAL_REPRESENTATION('',(#6393),#6397);+#6393 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6394,#6395,#6396),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6394 = CARTESIAN_POINT('',(0.384172952671,0.352040405584));+#6395 = CARTESIAN_POINT('',(0.384172952671,0.481988206303));+#6396 = CARTESIAN_POINT('',(0.361963692185,0.541055388448));+#6397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6398 = ORIENTED_EDGE('',*,*,#6399,.T.);+#6399 = EDGE_CURVE('',#6384,#6286,#6400,.T.);+#6400 = SURFACE_CURVE('',#6401,(#6405),.PCURVE_S1.);+#6401 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6402,#6403,#6404),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6402 = CARTESIAN_POINT('',(-1.605445380802,3.564113770628,10.505));+#6403 = CARTESIAN_POINT('',(-1.664512562947,3.541904510141,10.505));+#6404 = CARTESIAN_POINT('',(-1.664512562947,3.493233152054,10.505));+#6405 = PCURVE('',#6161,#6406);+#6406 = DEFINITIONAL_REPRESENTATION('',(#6407),#6411);+#6407 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6408,#6409,#6410),+  .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6408 = CARTESIAN_POINT('',(0.361963692185,0.541055388448));+#6409 = CARTESIAN_POINT('',(0.339754431698,0.600122570593));+#6410 = CARTESIAN_POINT('',(0.291083073611,0.600122570593));+#6411 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+  ) );+#6412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#6416)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#6413,#6414,#6415)) REPRESENTATION_CONTEXT+('Context #1','3D Context with UNIT and UNCERTAINTY') );+#6413 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#6414 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#6415 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#6416 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#6413,+  'distance_accuracy_value','confusion accuracy');+#6417 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#6418,#6420);+#6418 = ( REPRESENTATION_RELATIONSHIP('','',#3171,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#6419) +SHAPE_REPRESENTATION_RELATIONSHIP() );+#6419 = ITEM_DEFINED_TRANSFORMATION('','',#11,#19);+#6420 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item',+  #6421);+#6421 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('2','Adom.LaserEtch','',#5,#3166,+  $);+#6422 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#3168));+#6423 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+    #6424,#6432,#6439,#6446,#6454,#6461,#6468,#6475,#6482,#6489,#6496,+    #6503,#6510,#6517,#6524,#6531,#6538,#6545,#6552,#6559,#6566,#6573,+    #6580,#6587,#6594,#6601,#6608,#6615,#6622,#6629,#6636,#6643,#6650,+    #6657,#6664,#6671,#6678,#6685,#6692,#6699,#6706),#3153);+#6424 = STYLED_ITEM('color',(#6425),#39);+#6425 = PRESENTATION_STYLE_ASSIGNMENT((#6426));+#6426 = SURFACE_STYLE_USAGE(.BOTH.,#6427);+#6427 = SURFACE_SIDE_STYLE('',(#6428));+#6428 = SURFACE_STYLE_FILL_AREA(#6429);+#6429 = FILL_AREA_STYLE('',(#6430));+#6430 = FILL_AREA_STYLE_COLOUR('',#6431);+#6431 = COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#6432 = STYLED_ITEM('color',(#6433),#197);+#6433 = PRESENTATION_STYLE_ASSIGNMENT((#6434));+#6434 = SURFACE_STYLE_USAGE(.BOTH.,#6435);+#6435 = SURFACE_SIDE_STYLE('',(#6436));+#6436 = SURFACE_STYLE_FILL_AREA(#6437);+#6437 = FILL_AREA_STYLE('',(#6438));+#6438 = FILL_AREA_STYLE_COLOUR('',#6431);+#6439 = STYLED_ITEM('color',(#6440),#257);+#6440 = PRESENTATION_STYLE_ASSIGNMENT((#6441));+#6441 = SURFACE_STYLE_USAGE(.BOTH.,#6442);+#6442 = SURFACE_SIDE_STYLE('',(#6443));+#6443 = SURFACE_STYLE_FILL_AREA(#6444);+#6444 = FILL_AREA_STYLE('',(#6445));+#6445 = FILL_AREA_STYLE_COLOUR('',#6431);+#6446 = STYLED_ITEM('color',(#6447),#348);+#6447 = PRESENTATION_STYLE_ASSIGNMENT((#6448));+#6448 = SURFACE_STYLE_USAGE(.BOTH.,#6449);+#6449 = SURFACE_SIDE_STYLE('',(#6450));+#6450 = SURFACE_STYLE_FILL_AREA(#6451);+#6451 = FILL_AREA_STYLE('',(#6452));+#6452 = FILL_AREA_STYLE_COLOUR('',#6453);+#6453 = COLOUR_RGB('',0.147999998088,0.144999993226,0.144999993226);+#6454 = STYLED_ITEM('color',(#6455),#582);+#6455 = PRESENTATION_STYLE_ASSIGNMENT((#6456));+#6456 = SURFACE_STYLE_USAGE(.BOTH.,#6457);+#6457 = SURFACE_SIDE_STYLE('',(#6458));+#6458 = SURFACE_STYLE_FILL_AREA(#6459);+#6459 = FILL_AREA_STYLE('',(#6460));+#6460 = FILL_AREA_STYLE_COLOUR('',#6431);+#6461 = STYLED_ITEM('color',(#6462),#708);+#6462 = PRESENTATION_STYLE_ASSIGNMENT((#6463));+#6463 = SURFACE_STYLE_USAGE(.BOTH.,#6464);+#6464 = SURFACE_SIDE_STYLE('',(#6465));+#6465 = SURFACE_STYLE_FILL_AREA(#6466);+#6466 = FILL_AREA_STYLE('',(#6467));+#6467 = FILL_AREA_STYLE_COLOUR('',#6453);+#6468 = STYLED_ITEM('color',(#6469),#947);+#6469 = PRESENTATION_STYLE_ASSIGNMENT((#6470));+#6470 = SURFACE_STYLE_USAGE(.BOTH.,#6471);+#6471 = SURFACE_SIDE_STYLE('',(#6472));+#6472 = SURFACE_STYLE_FILL_AREA(#6473);+#6473 = FILL_AREA_STYLE('',(#6474));+#6474 = FILL_AREA_STYLE_COLOUR('',#6453);+#6475 = STYLED_ITEM('color',(#6476),#1001);+#6476 = PRESENTATION_STYLE_ASSIGNMENT((#6477));+#6477 = SURFACE_STYLE_USAGE(.BOTH.,#6478);+#6478 = SURFACE_SIDE_STYLE('',(#6479));+#6479 = SURFACE_STYLE_FILL_AREA(#6480);+#6480 = FILL_AREA_STYLE('',(#6481));+#6481 = FILL_AREA_STYLE_COLOUR('',#6453);+#6482 = STYLED_ITEM('color',(#6483),#1055);+#6483 = PRESENTATION_STYLE_ASSIGNMENT((#6484));+#6484 = SURFACE_STYLE_USAGE(.BOTH.,#6485);+#6485 = SURFACE_SIDE_STYLE('',(#6486));+#6486 = SURFACE_STYLE_FILL_AREA(#6487);+#6487 = FILL_AREA_STYLE('',(#6488));+#6488 = FILL_AREA_STYLE_COLOUR('',#6453);+#6489 = STYLED_ITEM('color',(#6490),#1206);+#6490 = PRESENTATION_STYLE_ASSIGNMENT((#6491));+#6491 = SURFACE_STYLE_USAGE(.BOTH.,#6492);+#6492 = SURFACE_SIDE_STYLE('',(#6493));+#6493 = SURFACE_STYLE_FILL_AREA(#6494);+#6494 = FILL_AREA_STYLE('',(#6495));+#6495 = FILL_AREA_STYLE_COLOUR('',#6453);+#6496 = STYLED_ITEM('color',(#6497),#1357);+#6497 = PRESENTATION_STYLE_ASSIGNMENT((#6498));+#6498 = SURFACE_STYLE_USAGE(.BOTH.,#6499);+#6499 = SURFACE_SIDE_STYLE('',(#6500));+#6500 = SURFACE_STYLE_FILL_AREA(#6501);+#6501 = FILL_AREA_STYLE('',(#6502));+#6502 = FILL_AREA_STYLE_COLOUR('',#6453);+#6503 = STYLED_ITEM('color',(#6504),#1407);+#6504 = PRESENTATION_STYLE_ASSIGNMENT((#6505));+#6505 = SURFACE_STYLE_USAGE(.BOTH.,#6506);+#6506 = SURFACE_SIDE_STYLE('',(#6507));+#6507 = SURFACE_STYLE_FILL_AREA(#6508);+#6508 = FILL_AREA_STYLE('',(#6509));+#6509 = FILL_AREA_STYLE_COLOUR('',#6453);+#6510 = STYLED_ITEM('color',(#6511),#1457);+#6511 = PRESENTATION_STYLE_ASSIGNMENT((#6512));+#6512 = SURFACE_STYLE_USAGE(.BOTH.,#6513);+#6513 = SURFACE_SIDE_STYLE('',(#6514));+#6514 = SURFACE_STYLE_FILL_AREA(#6515);+#6515 = FILL_AREA_STYLE('',(#6516));+#6516 = FILL_AREA_STYLE_COLOUR('',#6453);+#6517 = STYLED_ITEM('color',(#6518),#1627);+#6518 = PRESENTATION_STYLE_ASSIGNMENT((#6519));+#6519 = SURFACE_STYLE_USAGE(.BOTH.,#6520);+#6520 = SURFACE_SIDE_STYLE('',(#6521));+#6521 = SURFACE_STYLE_FILL_AREA(#6522);+#6522 = FILL_AREA_STYLE('',(#6523));+#6523 = FILL_AREA_STYLE_COLOUR('',#6431);+#6524 = STYLED_ITEM('color',(#6525),#1714);+#6525 = PRESENTATION_STYLE_ASSIGNMENT((#6526));+#6526 = SURFACE_STYLE_USAGE(.BOTH.,#6527);+#6527 = SURFACE_SIDE_STYLE('',(#6528));+#6528 = SURFACE_STYLE_FILL_AREA(#6529);+#6529 = FILL_AREA_STYLE('',(#6530));+#6530 = FILL_AREA_STYLE_COLOUR('',#6453);+#6531 = STYLED_ITEM('color',(#6532),#1983);+#6532 = PRESENTATION_STYLE_ASSIGNMENT((#6533));+#6533 = SURFACE_STYLE_USAGE(.BOTH.,#6534);+#6534 = SURFACE_SIDE_STYLE('',(#6535));+#6535 = SURFACE_STYLE_FILL_AREA(#6536);+#6536 = FILL_AREA_STYLE('',(#6537));+#6537 = FILL_AREA_STYLE_COLOUR('',#6453);+#6538 = STYLED_ITEM('color',(#6539),#2010);+#6539 = PRESENTATION_STYLE_ASSIGNMENT((#6540));+#6540 = SURFACE_STYLE_USAGE(.BOTH.,#6541);+#6541 = SURFACE_SIDE_STYLE('',(#6542));+#6542 = SURFACE_STYLE_FILL_AREA(#6543);+#6543 = FILL_AREA_STYLE('',(#6544));+#6544 = FILL_AREA_STYLE_COLOUR('',#6431);+#6545 = STYLED_ITEM('color',(#6546),#2086);+#6546 = PRESENTATION_STYLE_ASSIGNMENT((#6547));+#6547 = SURFACE_STYLE_USAGE(.BOTH.,#6548);+#6548 = SURFACE_SIDE_STYLE('',(#6549));+#6549 = SURFACE_STYLE_FILL_AREA(#6550);+#6550 = FILL_AREA_STYLE('',(#6551));+#6551 = FILL_AREA_STYLE_COLOUR('',#6453);+#6552 = STYLED_ITEM('color',(#6553),#2093);+#6553 = PRESENTATION_STYLE_ASSIGNMENT((#6554));+#6554 = SURFACE_STYLE_USAGE(.BOTH.,#6555);+#6555 = SURFACE_SIDE_STYLE('',(#6556));+#6556 = SURFACE_STYLE_FILL_AREA(#6557);+#6557 = FILL_AREA_STYLE('',(#6558));+#6558 = FILL_AREA_STYLE_COLOUR('',#6453);+#6559 = STYLED_ITEM('color',(#6560),#2120);+#6560 = PRESENTATION_STYLE_ASSIGNMENT((#6561));+#6561 = SURFACE_STYLE_USAGE(.BOTH.,#6562);+#6562 = SURFACE_SIDE_STYLE('',(#6563));+#6563 = SURFACE_STYLE_FILL_AREA(#6564);+#6564 = FILL_AREA_STYLE('',(#6565));+#6565 = FILL_AREA_STYLE_COLOUR('',#6453);+#6566 = STYLED_ITEM('color',(#6567),#2127);+#6567 = PRESENTATION_STYLE_ASSIGNMENT((#6568));+#6568 = SURFACE_STYLE_USAGE(.BOTH.,#6569);+#6569 = SURFACE_SIDE_STYLE('',(#6570));+#6570 = SURFACE_STYLE_FILL_AREA(#6571);+#6571 = FILL_AREA_STYLE('',(#6572));+#6572 = FILL_AREA_STYLE_COLOUR('',#6453);+#6573 = STYLED_ITEM('color',(#6574),#2159);+#6574 = PRESENTATION_STYLE_ASSIGNMENT((#6575));+#6575 = SURFACE_STYLE_USAGE(.BOTH.,#6576);+#6576 = SURFACE_SIDE_STYLE('',(#6577));+#6577 = SURFACE_STYLE_FILL_AREA(#6578);+#6578 = FILL_AREA_STYLE('',(#6579));+#6579 = FILL_AREA_STYLE_COLOUR('',#6453);+#6580 = STYLED_ITEM('color',(#6581),#2166);+#6581 = PRESENTATION_STYLE_ASSIGNMENT((#6582));+#6582 = SURFACE_STYLE_USAGE(.BOTH.,#6583);+#6583 = SURFACE_SIDE_STYLE('',(#6584));+#6584 = SURFACE_STYLE_FILL_AREA(#6585);+#6585 = FILL_AREA_STYLE('',(#6586));+#6586 = FILL_AREA_STYLE_COLOUR('',#6453);+#6587 = STYLED_ITEM('color',(#6588),#2198);+#6588 = PRESENTATION_STYLE_ASSIGNMENT((#6589));+#6589 = SURFACE_STYLE_USAGE(.BOTH.,#6590);+#6590 = SURFACE_SIDE_STYLE('',(#6591));+#6591 = SURFACE_STYLE_FILL_AREA(#6592);+#6592 = FILL_AREA_STYLE('',(#6593));+#6593 = FILL_AREA_STYLE_COLOUR('',#6453);+#6594 = STYLED_ITEM('color',(#6595),#2205);+#6595 = PRESENTATION_STYLE_ASSIGNMENT((#6596));+#6596 = SURFACE_STYLE_USAGE(.BOTH.,#6597);+#6597 = SURFACE_SIDE_STYLE('',(#6598));+#6598 = SURFACE_STYLE_FILL_AREA(#6599);+#6599 = FILL_AREA_STYLE('',(#6600));+#6600 = FILL_AREA_STYLE_COLOUR('',#6431);+#6601 = STYLED_ITEM('color',(#6602),#2281);+#6602 = PRESENTATION_STYLE_ASSIGNMENT((#6603));+#6603 = SURFACE_STYLE_USAGE(.BOTH.,#6604);+#6604 = SURFACE_SIDE_STYLE('',(#6605));+#6605 = SURFACE_STYLE_FILL_AREA(#6606);+#6606 = FILL_AREA_STYLE('',(#6607));+#6607 = FILL_AREA_STYLE_COLOUR('',#6431);+#6608 = STYLED_ITEM('color',(#6609),#2418);+#6609 = PRESENTATION_STYLE_ASSIGNMENT((#6610));+#6610 = SURFACE_STYLE_USAGE(.BOTH.,#6611);+#6611 = SURFACE_SIDE_STYLE('',(#6612));+#6612 = SURFACE_STYLE_FILL_AREA(#6613);+#6613 = FILL_AREA_STYLE('',(#6614));+#6614 = FILL_AREA_STYLE_COLOUR('',#6431);+#6615 = STYLED_ITEM('color',(#6616),#2495);+#6616 = PRESENTATION_STYLE_ASSIGNMENT((#6617));+#6617 = SURFACE_STYLE_USAGE(.BOTH.,#6618);+#6618 = SURFACE_SIDE_STYLE('',(#6619));+#6619 = SURFACE_STYLE_FILL_AREA(#6620);+#6620 = FILL_AREA_STYLE('',(#6621));+#6621 = FILL_AREA_STYLE_COLOUR('',#6431);+#6622 = STYLED_ITEM('color',(#6623),#2545);+#6623 = PRESENTATION_STYLE_ASSIGNMENT((#6624));+#6624 = SURFACE_STYLE_USAGE(.BOTH.,#6625);+#6625 = SURFACE_SIDE_STYLE('',(#6626));+#6626 = SURFACE_STYLE_FILL_AREA(#6627);+#6627 = FILL_AREA_STYLE('',(#6628));+#6628 = FILL_AREA_STYLE_COLOUR('',#6431);+#6629 = STYLED_ITEM('color',(#6630),#2595);+#6630 = PRESENTATION_STYLE_ASSIGNMENT((#6631));+#6631 = SURFACE_STYLE_USAGE(.BOTH.,#6632);+#6632 = SURFACE_SIDE_STYLE('',(#6633));+#6633 = SURFACE_STYLE_FILL_AREA(#6634);+#6634 = FILL_AREA_STYLE('',(#6635));+#6635 = FILL_AREA_STYLE_COLOUR('',#6431);+#6636 = STYLED_ITEM('color',(#6637),#2672);+#6637 = PRESENTATION_STYLE_ASSIGNMENT((#6638));+#6638 = SURFACE_STYLE_USAGE(.BOTH.,#6639);+#6639 = SURFACE_SIDE_STYLE('',(#6640));+#6640 = SURFACE_STYLE_FILL_AREA(#6641);+#6641 = FILL_AREA_STYLE('',(#6642));+#6642 = FILL_AREA_STYLE_COLOUR('',#6431);+#6643 = STYLED_ITEM('color',(#6644),#2722);+#6644 = PRESENTATION_STYLE_ASSIGNMENT((#6645));+#6645 = SURFACE_STYLE_USAGE(.BOTH.,#6646);+#6646 = SURFACE_SIDE_STYLE('',(#6647));+#6647 = SURFACE_STYLE_FILL_AREA(#6648);+#6648 = FILL_AREA_STYLE('',(#6649));+#6649 = FILL_AREA_STYLE_COLOUR('',#6431);+#6650 = STYLED_ITEM('color',(#6651),#2772);+#6651 = PRESENTATION_STYLE_ASSIGNMENT((#6652));+#6652 = SURFACE_STYLE_USAGE(.BOTH.,#6653);+#6653 = SURFACE_SIDE_STYLE('',(#6654));+#6654 = SURFACE_STYLE_FILL_AREA(#6655);+#6655 = FILL_AREA_STYLE('',(#6656));+#6656 = FILL_AREA_STYLE_COLOUR('',#6431);+#6657 = STYLED_ITEM('color',(#6658),#2799);+#6658 = PRESENTATION_STYLE_ASSIGNMENT((#6659));+#6659 = SURFACE_STYLE_USAGE(.BOTH.,#6660);+#6660 = SURFACE_SIDE_STYLE('',(#6661));+#6661 = SURFACE_STYLE_FILL_AREA(#6662);+#6662 = FILL_AREA_STYLE('',(#6663));+#6663 = FILL_AREA_STYLE_COLOUR('',#6431);+#6664 = STYLED_ITEM('color',(#6665),#2826);+#6665 = PRESENTATION_STYLE_ASSIGNMENT((#6666));+#6666 = SURFACE_STYLE_USAGE(.BOTH.,#6667);+#6667 = SURFACE_SIDE_STYLE('',(#6668));+#6668 = SURFACE_STYLE_FILL_AREA(#6669);+#6669 = FILL_AREA_STYLE('',(#6670));+#6670 = FILL_AREA_STYLE_COLOUR('',#6431);+#6671 = STYLED_ITEM('color',(#6672),#2962);+#6672 = PRESENTATION_STYLE_ASSIGNMENT((#6673));+#6673 = SURFACE_STYLE_USAGE(.BOTH.,#6674);+#6674 = SURFACE_SIDE_STYLE('',(#6675));+#6675 = SURFACE_STYLE_FILL_AREA(#6676);+#6676 = FILL_AREA_STYLE('',(#6677));+#6677 = FILL_AREA_STYLE_COLOUR('',#6453);+#6678 = STYLED_ITEM('color',(#6679),#3080);+#6679 = PRESENTATION_STYLE_ASSIGNMENT((#6680));+#6680 = SURFACE_STYLE_USAGE(.BOTH.,#6681);+#6681 = SURFACE_SIDE_STYLE('',(#6682));+#6682 = SURFACE_STYLE_FILL_AREA(#6683);+#6683 = FILL_AREA_STYLE('',(#6684));+#6684 = FILL_AREA_STYLE_COLOUR('',#6431);+#6685 = STYLED_ITEM('color',(#6686),#3108);+#6686 = PRESENTATION_STYLE_ASSIGNMENT((#6687));+#6687 = SURFACE_STYLE_USAGE(.BOTH.,#6688);+#6688 = SURFACE_SIDE_STYLE('',(#6689));+#6689 = SURFACE_STYLE_FILL_AREA(#6690);+#6690 = FILL_AREA_STYLE('',(#6691));+#6691 = FILL_AREA_STYLE_COLOUR('',#6431);+#6692 = STYLED_ITEM('color',(#6693),#3115);+#6693 = PRESENTATION_STYLE_ASSIGNMENT((#6694));+#6694 = SURFACE_STYLE_USAGE(.BOTH.,#6695);+#6695 = SURFACE_SIDE_STYLE('',(#6696));+#6696 = SURFACE_STYLE_FILL_AREA(#6697);+#6697 = FILL_AREA_STYLE('',(#6698));+#6698 = FILL_AREA_STYLE_COLOUR('',#6431);+#6699 = STYLED_ITEM('color',(#6700),#3122);+#6700 = PRESENTATION_STYLE_ASSIGNMENT((#6701));+#6701 = SURFACE_STYLE_USAGE(.BOTH.,#6702);+#6702 = SURFACE_SIDE_STYLE('',(#6703));+#6703 = SURFACE_STYLE_FILL_AREA(#6704);+#6704 = FILL_AREA_STYLE('',(#6705));+#6705 = FILL_AREA_STYLE_COLOUR('',#6431);+#6706 = STYLED_ITEM('color',(#6707),#3148);+#6707 = PRESENTATION_STYLE_ASSIGNMENT((#6708));+#6708 = SURFACE_STYLE_USAGE(.BOTH.,#6709);+#6709 = SURFACE_SIDE_STYLE('',(#6710));+#6710 = SURFACE_STYLE_FILL_AREA(#6711);+#6711 = FILL_AREA_STYLE('',(#6712));+#6712 = FILL_AREA_STYLE_COLOUR('',#6453);+ENDSEC;+END-ISO-10303-21;
rvt1j101m1010.glbadded
⋯ 1 unchanged line ⋯
rvt1j101m1010.kicad_modadded+358
@@ -0,0 +1,358 @@+(footprint "RVT1J101M1010"+	(layer "F.Cu")+	(descr "SMD capacitor, aluminum electrolytic, Vishay 1010, 10.0x10.5mm, http://www.vishay.com/docs/28395/150crz.pdf"+	)+	(tags "capacitor electrolytic")+	(property "Reference" "REF**"+		(at 0 -6.3 180)+		(layer "F.SilkS")+		(hide yes)+		(uuid "b92fc2e3-2a2a-4c58-9107-af20b89e90c0")+		(effects+			(font (size 1 1) (thickness 0.15))+		)+	)+	(property "Value" "RVT1J101M1010"+		(at 0.199999 0 180)+		(layer "F.Fab")+		(hide yes)+		(uuid "43c145f5-7aed-40cc-b2b5-1a5fd947c527")+		(effects+			(font (size 1 1) (thickness 0.15))+		)+	)+	(property "Datasheet" ""+		(at 0 0 180)+		(layer "F.Fab")+		(hide yes)+		(uuid "17ef6bce-aa4e-4e31-bcef-a6ee12ee520f")+		(effects+			(font (size 1.27 1.27))+		)+	)+	(property "Description" "-55℃~+105℃ 10.2mm 100uF 10mm 2000hrs@105℃ 63V ±20% SMD,D10xL10.2mm Aluminum Electrolytic Capacitor"+		(at 0 0 180)+		(layer "F.Fab")+		(hide yes)+		(uuid "1f21882b-5cc2-4678-854b-6459657f6d7e")+		(effects+			(font (size 1.27 1.27))+		)+	)+	(property "LCSC" "C28241"+		(at 0 0)+		(unlocked yes)+		(layer "F.Fab")+		(hide yes)+		(uuid "f3a47fe7-0d84-4a0a-8f95-cc9ac55c8b94")+		(effects+			(font (size 1 1) (thickness 0.15))+		)+	)+	(property "MFR" "Honor Elec"+		(at 0 0)+		(unlocked yes)+		(layer "F.Fab")+		(hide yes)+		(uuid "3157af1b-b003-47a2-be97-b051fe72bf79")+		(effects+			(font (size 1 1) (thickness 0.15))+		)+	)+	(property "PN" "RVT1J101M1010"+		(at 0 0)+		(unlocked yes)+		(layer "F.Fab")+		(hide yes)+		(uuid "259ac095-9ddf-4d80-9f03-4ee54e00a77a")+		(effects+			(font (size 1 1) (thickness 0.15))+		)+	)+	(property ki_fp_filters "CP_*")+	(units+		(unit (name "A") (pins "1" "2"))+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start 5.36 5.36)+		(end 5.36 1.51)+		(stroke (width 0.12) (type solid))+		(layer "F.SilkS")+		(uuid "406befbe-b639-4949-8204-d5e825bdacdf")+	)+	(fp_line+		(start 5.36 -5.36)+		(end 5.36 -1.51)+		(stroke (width 0.12) (type solid))+		(layer "F.SilkS")+		(uuid "044715f1-9f47-43bc-89fa-7f9e7016ffba")+	)+	(fp_line+		(start -4.295563 5.36)+		(end 5.36 5.36)+		(stroke (width 0.12) (type solid))+		(layer "F.SilkS")+		(uuid "e0502dbc-6a33-4e92-a4ff-c41bf4fecbdd")+	)+	(fp_line+		(start -4.295563 -5.36)+		(end 5.36 -5.36)+		(stroke (width 0.12) (type solid))+		(layer "F.SilkS")+		(uuid "e6b90d7e-8429-493f-8d11-5a094d2aad1b")+	)+	(fp_line+		(start -5.36 4.295563)+		(end -4.295563 5.36)+		(stroke (width 0.12) (type solid))+		(layer "F.SilkS")+		(uuid "045775c3-eb39-4582-b049-8bdec105f60f")+	)+	(fp_line+		(start -5.36 4.295563)+		(end -5.36 1.51)+		(stroke (width 0.12) (type solid))+		(layer "F.SilkS")+		(uuid "32605b53-3ec2-4833-9055-efb0dc4bdbac")+	)+	(fp_line+		(start -5.36 -4.295563)+		(end -4.295563 -5.36)+		(stroke (width 0.12) (type solid))+		(layer "F.SilkS")+		(uuid "a3944836-f9c7-41df-a463-3335cc5ffc55")+	)+	(fp_line+		(start -5.36 -4.295563)+		(end -5.36 -1.51)+		(stroke (width 0.12) (type solid))+		(layer "F.SilkS")+		(uuid "b84d8d9a-ca13-460f-a2f6-9dfa915b9a18")+	)+	(fp_line+		(start -6.225 -3.385)+		(end -6.225 -2.135)+		(stroke (width 0.12) (type solid))+		(layer "F.SilkS")+		(uuid "882010d7-d635-417c-83f6-bf448237a32f")+	)+	(fp_line+		(start -6.85 -2.76)+		(end -5.6 -2.76)+		(stroke (width 0.12) (type solid))+		(layer "F.SilkS")+		(uuid "9dcd07ab-5dec-423e-901b-67b8a1822141")+	)+	(fp_line+		(start 6.65 1.5)+		(end 5.5 1.5)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "c4d319ee-f468-411b-9cc4-f091df18d92a")+	)+	(fp_line+		(start 6.65 -1.5)+		(end 6.65 1.5)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "486c20a6-8d04-4b00-a610-1d8de3fe9a3c")+	)+	(fp_line+		(start 5.5 1.5)+		(end 5.5 5.5)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "13effba0-833f-4ec3-8bc1-397173bca28a")+	)+	(fp_line+		(start 5.5 -1.5)+		(end 6.65 -1.5)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "90929d33-4f60-42e8-aa62-85c2c02df654")+	)+	(fp_line+		(start 5.5 -5.5)+		(end 5.5 -1.5)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "a26d1817-dc8a-448d-b2c3-d5d3cd44cb1c")+	)+	(fp_line+		(start -4.35 5.5)+		(end 5.5 5.5)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "dd0ce7aa-c094-4c0c-b107-544fb94c7ce0")+	)+	(fp_line+		(start -4.35 -5.5)+		(end 5.5 -5.5)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "f1819460-f902-4433-9f0e-11366eefebd1")+	)+	(fp_line+		(start -5.5 4.35)+		(end -4.35 5.5)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "5fe00b2e-8481-4afa-93ec-c16d6b3f252a")+	)+	(fp_line+		(start -5.5 1.5)+		(end -5.5 4.35)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "4fa46eb2-0d1c-426c-bf4b-0b56401bb988")+	)+	(fp_line+		(start -5.5 -1.5)+		(end -6.65 -1.5)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "2e1a108a-9be0-47c5-9de4-27ec5ec73204")+	)+	(fp_line+		(start -5.5 -4.35)+		(end -4.35 -5.5)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "5e76fe9c-b971-4ff1-844f-549bb314d57e")+	)+	(fp_line+		(start -5.5 -4.35)+		(end -5.5 -1.5)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "54635011-bacb-4fba-bb0c-54716f16477c")+	)+	(fp_line+		(start -6.65 1.5)+		(end -5.5 1.5)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "827a1694-7b27-494c-aab6-0358dc13d6c1")+	)+	(fp_line+		(start -6.65 -1.5)+		(end -6.65 1.5)+		(stroke (width 0.05) (type solid))+		(layer "F.CrtYd")+		(uuid "9d787f84-a06a-4f3b-8aa7-f10b4edbf294")+	)+	(fp_line+		(start 5.25 -5.25)+		(end 5.25 5.25)+		(stroke (width 0.1) (type solid))+		(layer "F.Fab")+		(uuid "781bf0c7-5b3c-4307-8659-9ac1504c926c")+	)+	(fp_line+		(start -4.058325 -2.2)+		(end -4.058325 -1.2)+		(stroke (width 0.1) (type solid))+		(layer "F.Fab")+		(uuid "b1679b66-d575-4ab0-bbb8-4242d1c34911")+	)+	(fp_line+		(start -4.25 5.25)+		(end 5.25 5.25)+		(stroke (width 0.1) (type solid))+		(layer "F.Fab")+		(uuid "c2e6aeab-4c2e-4f31-b3c4-02657c84e9e3")+	)+	(fp_line+		(start -4.25 -5.25)+		(end 5.25 -5.25)+		(stroke (width 0.1) (type solid))+		(layer "F.Fab")+		(uuid "aa9f951d-d73c-4c6e-93d6-893be03e9bc4")+	)+	(fp_line+		(start -4.558325 -1.7)+		(end -3.558325 -1.7)+		(stroke (width 0.1) (type solid))+		(layer "F.Fab")+		(uuid "03f4ff12-c5d6-4646-881b-d7a97e500b44")+	)+	(fp_line+		(start -5.25 4.25)+		(end -4.25 5.25)+		(stroke (width 0.1) (type solid))+		(layer "F.Fab")+		(uuid "573763cf-4ce8-4c43-a331-a18159dc8742")+	)+	(fp_line+		(start -5.25 -4.25)+		(end -4.25 -5.25)+		(stroke (width 0.1) (type solid))+		(layer "F.Fab")+		(uuid "ade80f3e-3401-4d48-b8eb-d044749e480d")+	)+	(fp_line+		(start -5.25 -4.25)+		(end -5.25 4.25)+		(stroke (width 0.1) (type solid))+		(layer "F.Fab")+		(uuid "65a66b1b-553e-4c1a-82e2-adff3e898d43")+	)+	(fp_circle+		(center 0 0)+		(end 5 0)+		(stroke (width 0.1) (type solid))+		(fill no)+		(layer "F.Fab")+		(uuid "64eb410b-30c0-4bd4-b09b-8ec16a5e323c")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 180)+		(layer "F.Fab")+		(uuid "fd04cc2a-a683-439d-9a7e-38d345e065c5")+		(effects+			(font (size 1 1) (thickness 0.15))+		)+	)+	(pad "1" smd roundrect+		(at -4.199999 0)+		(size 4.4 2.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.1)+		(teardrops+			(best_length_ratio 0.5)+			(max_length 1)+			(best_width_ratio 1)+			(max_width 2)+			(curved_edges yes)+			(filter_ratio 0.9)+			(enabled yes)+			(allow_two_segments yes)+			(prefer_zone_connections yes)+		)+	)+	(pad "2" smd roundrect+		(at 4.199999 0)+		(size 4.4 2.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.1)+		(teardrops+			(best_length_ratio 0.5)+			(max_length 1)+			(best_width_ratio 1)+			(max_width 2)+			(curved_edges yes)+			(filter_ratio 0.9)+			(enabled yes)+			(allow_two_segments yes)+			(prefer_zone_connections yes)+		)+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Capacitor_SMD.3dshapes/CP_Elec_10x10.5.step"+		(offset (xyz 0 0 0))+		(scale (xyz 1 1 1))+		(rotate (xyz 0 0 0))+	)+)
rvt1j101m1010.kicad_symadded+153
@@ -0,0 +1,153 @@+(kicad_symbol_lib+	(version 20241209)+	(generator "adom-parts")+	(generator_version "1.0")+	(symbol "RVT1J101M1010"+		(pin_numbers (hide yes))+		(pin_names (offset 0.254))+		(exclude_from_sim no)+		(in_bom yes)+		(on_board yes)+		(in_pos_files yes)+		(duplicate_pin_numbers_are_jumpers no)+		(property "Reference" "C"+			(at 0.635 2.54 0)+			(show_name no)+			(do_not_autoplace no)+			(effects+				(font (size 1.27 1.27))+				(justify left)+			)+		)+		(property "Manufacturer" "Honor Elec"+			(at 0 0 0)+			(effects+				(font (size 1.27 1.27))+				(hide yes)+			)+		)+		(property "Value" "RVT1J101M1010"+			(at 0.635 -2.54 0)+			(show_name no)+			(do_not_autoplace no)+			(effects+				(font (size 1.27 1.27))+				(justify left)+			)+		)+		(property "Footprint" "Capacitor_SMD:CP_Elec_10x10.5"+			(at 0.9652 -3.81 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font (size 1.27 1.27))+			)+		)+		(property "Datasheet" "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757290979353747456"+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font (size 1.27 1.27))+			)+		)+		(property "Description" "-55℃~+105℃ 10.2mm 100uF 10mm 2000hrs@105℃ 63V ±20% SMD,D10xL10.2mm Aluminum Electrolytic Capacitors - SMD ROHS"+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font (size 1.27 1.27))+			)+		)+		(property "ki_keywords" "cap capacitor"+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font (size 1.27 1.27))+			)+		)+		(property "ki_fp_filters" "CP_*"+			(at 0 0 0)+			(show_name no)+			(do_not_autoplace no)+			(hide yes)+			(effects+				(font (size 1.27 1.27))+			)+		)+		(property "MPN" "RVT1J101M1010"+			(at 0 0 0)+			(effects+				(font (size 1.27 1.27))+				(hide yes)+			)+		)+		(property "LCSC" "C28241"+			(at 0 0 0)+			(effects+				(font (size 1.27 1.27))+				(hide yes)+			)+		)+		(symbol "RVT1J101M1010_0_1"+			(rectangle+				(start -2.286 0.508)+				(end 2.286 1.016)+				(stroke (width 0) (type default))+				(fill (type none))+			)+			(polyline+				(pts (xy -1.778 2.286) (xy -0.762 2.286))+				(stroke (width 0) (type default))+				(fill (type none))+			)+			(polyline+				(pts (xy -1.27 2.794) (xy -1.27 1.778))+				(stroke (width 0) (type default))+				(fill (type none))+			)+			(rectangle+				(start 2.286 -0.508)+				(end -2.286 -1.016)+				(stroke (width 0) (type default))+				(fill (type outline))+			)+		)+		(symbol "RVT1J101M1010_1_1"+			(pin passive line+				(at 0 3.81 270)+				(length 2.794)+				(name ""+					(effects+						(font (size 1.27 1.27))+					)+				)+				(number "1"+					(effects+						(font (size 1.27 1.27))+					)+				)+			)+			(pin passive line+				(at 0 -3.81 90)+				(length 2.794)+				(name ""+					(effects+						(font (size 1.27 1.27))+					)+				)+				(number "2"+					(effects+						(font (size 1.27 1.27))+					)+				)+			)+		)+		(embedded_fonts no)+	)+)
rvt1j101m1010.lbradded+127
@@ -0,0 +1,127 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description>-55℃~+105℃ 10.2mm 100uF 10mm 2000hrs@105℃ 63V ±20% SMD,D10xL10.2mm Aluminum Electrolytic Capacitors - SMD ROHS</description>+<packages>+<package name="RVT1J101M1010">+  <description>2 pads, 12.8 x 2.5 mm. SMD capacitor, aluminum electrolytic, Vishay 1010, 10.0x10.5mm</description>+  <smd name="1" x="-4.2000" y="-0.0000" dx="4.4000" dy="2.5000" layer="1" roundness="20"/>+  <smd name="2" x="4.2000" y="-0.0000" dx="4.4000" dy="2.5000" layer="1" roundness="20"/>+  <circle x="0.0000" y="-0.0000" radius="5.0000" width="0.1000" layer="51"/>+  <wire x1="5.3600" y1="-5.3600" x2="5.3600" y2="-1.5100" width="0.1200" layer="21"/>+  <wire x1="5.3600" y1="5.3600" x2="5.3600" y2="1.5100" width="0.1200" layer="21"/>+  <wire x1="-4.2956" y1="-5.3600" x2="5.3600" y2="-5.3600" width="0.1200" layer="21"/>+  <wire x1="-4.2956" y1="5.3600" x2="5.3600" y2="5.3600" width="0.1200" layer="21"/>+  <wire x1="-5.3600" y1="-4.2956" x2="-4.2956" y2="-5.3600" width="0.1200" layer="21"/>+  <wire x1="-5.3600" y1="-4.2956" x2="-5.3600" y2="-1.5100" width="0.1200" layer="21"/>+  <wire x1="-5.3600" y1="4.2956" x2="-4.2956" y2="5.3600" width="0.1200" layer="21"/>+  <wire x1="-5.3600" y1="4.2956" x2="-5.3600" y2="1.5100" width="0.1200" layer="21"/>+  <wire x1="-6.2250" y1="3.3850" x2="-6.2250" y2="2.1350" width="0.1200" layer="21"/>+  <wire x1="-6.8500" y1="2.7600" x2="-5.6000" y2="2.7600" width="0.1200" layer="21"/>+  <wire x1="5.2500" y1="5.2500" x2="5.2500" y2="-5.2500" width="0.1000" layer="51"/>+  <wire x1="-4.0583" y1="2.2000" x2="-4.0583" y2="1.2000" width="0.1000" layer="51"/>+  <wire x1="-4.2500" y1="-5.2500" x2="5.2500" y2="-5.2500" width="0.1000" layer="51"/>+  <wire x1="-4.2500" y1="5.2500" x2="5.2500" y2="5.2500" width="0.1000" layer="51"/>+  <wire x1="-4.5583" y1="1.7000" x2="-3.5583" y2="1.7000" width="0.1000" layer="51"/>+  <wire x1="-5.2500" y1="-4.2500" x2="-4.2500" y2="-5.2500" width="0.1000" layer="51"/>+  <wire x1="-5.2500" y1="4.2500" x2="-4.2500" y2="5.2500" width="0.1000" layer="51"/>+  <wire x1="-5.2500" y1="4.2500" x2="-5.2500" y2="-4.2500" width="0.1000" layer="51"/>+  <text x="0" y="5.960" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-5.960" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="RVT1J101M1010">+  <description>-55℃~+105℃ 10.2mm 100uF 10mm 2000hrs@105℃ 63V ±20% SMD,D10xL10.2mm Aluminum Electrolytic Capacitors - SMD ROHS</description>+  <wire x1="-2.286" y1="0.508" x2="2.286" y2="0.508" width="0.254" layer="94"/>+  <wire x1="2.286" y1="0.508" x2="2.286" y2="1.016" width="0.254" layer="94"/>+  <wire x1="2.286" y1="1.016" x2="-2.286" y2="1.016" width="0.254" layer="94"/>+  <wire x1="-2.286" y1="1.016" x2="-2.286" y2="0.508" width="0.254" layer="94"/>+  <rectangle x1="2.2860" y1="-0.5080" x2="-2.2860" y2="-1.0160" layer="94"/>+  <wire x1="-1.7780" y1="2.2860" x2="-0.7620" y2="2.2860" width="0.1524" layer="94"/>+  <wire x1="-1.2700" y1="2.7940" x2="-1.2700" y2="1.7780" width="0.1524" layer="94"/>+  <text x="0.6350" y="2.5400" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.6350" y="-2.5400" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <wire x1="0.0000" y1="3.8100" x2="0.0000" y2="1.0160" width="0.254" layer="94"/>+  <pin name="1" x="0" y="3.81" length="point" direction="pas" rot="R270" visible="pad"/>+  <wire x1="0.0000" y1="-3.8100" x2="0.0000" y2="-1.0160" width="0.254" layer="94"/>+  <pin name="2" x="0" y="-3.81" length="point" direction="pas" rot="R90" visible="pad"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="RVT1J101M1010" prefix="C">+  <description>-55℃~+105℃ 10.2mm 100uF 10mm 2000hrs@105℃ 63V ±20% SMD,D10xL10.2mm Aluminum Electrolytic Capacitors - SMD ROHS</description>+  <gates>+    <gate name="G$1" symbol="RVT1J101M1010" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="RVT1J101M1010">+      <connects>+        <connect gate="G$1" pin="1" pad="1"/>+        <connect gate="G$1" pin="2" pad="2"/>+      </connects>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="RVT1J101M1010" constant="no"/>+          <attribute name="MANUFACTURER" value="Honor Elec" constant="no"/>+          <attribute name="DATASHEET" value="https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8757290979353747456" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/rvt1j101m1010" constant="no"/>+          <attribute name="LCSC_PN" value="C28241" constant="no"/>+        </technology>+      </technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file
rvt1j101m1010.stepadded+1945
@@ -0,0 +1,1945 @@+ISO-10303-21;+HEADER;+/* CP_Elec_10x10.5.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2018, kicad StepUp+ * + * This work is licensed under the [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode), + * with the following exception:+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be considered to be 'Adapted Material', + * then the copyright holder waives article 3 of the license with respect to these designs and any generated files which use data provided + * as part of the 'Licensed Material'.+ * You are free to use the library data in your own projects without the obligation to share your project files under this or any other license agreement.+ * However, if you wish to redistribute these libraries, or parts thereof (including in modified form) as a collection then the exception above does not apply. + * Please refer to https://github.com/KiCad/kicad-packages3D/blob/master/LICENSE.md for further clarification of the exception.+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * *USE 3D CAD DATA AT YOUR OWN RISK*+ * *DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.*+ * + */++FILE_DESCRIPTION(+/* description */ ('model of CP_Elec_10x10.5'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'CP_Elec_10x10.5.step',+/* time_stamp */ '2018-06-25T02:13:49',+/* author */ ('kicad StepUp','ksu'),+/* organization */ ('FreeCAD'),+/* preprocessor_version */ 'OCC',+/* originating_system */ 'kicad StepUp',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('CP_Elec_10x105','CP_Elec_10x105','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#1378);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = MANIFOLD_SOLID_BREP('',#16);+#16 = CLOSED_SHELL('',(#17,#60,#86,#159,#238,#278,#357,#382,#407,#463,+#519,#544,#569,#634,#707,#793,#810,#841,#853,#870,#882,#900,#912,+#930,#942,#973,#1025,#1057,#1082,#1107,#1139,#1164,#1189,#1206,#1223+,#1270,#1310,#1328,#1340,#1352,#1368));+#17 = ADVANCED_FACE('',(#18),#55,.T.);+#18 = FACE_BOUND('',#19,.F.);+#19 = EDGE_LOOP('',(#20,#30,#37,#38));+#20 = ORIENTED_EDGE('',*,*,#21,.F.);+#21 = EDGE_CURVE('',#22,#24,#26,.T.);+#22 = VERTEX_POINT('',#23);+#23 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,1.316666666667));+#24 = VERTEX_POINT('',#25);+#25 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.352277442495));+#26 = LINE('',#27,#28);+#27 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,0.65));+#28 = VECTOR('',#29,1.);+#29 = DIRECTION('',(0.,0.,1.));+#30 = ORIENTED_EDGE('',*,*,#31,.T.);+#31 = EDGE_CURVE('',#22,#22,#32,.T.);+#32 = CIRCLE('',#33,5.);+#33 = AXIS2_PLACEMENT_3D('',#34,#35,#36);+#34 = CARTESIAN_POINT('',(0.,0.,1.316666666667));+#35 = DIRECTION('',(0.,0.,-1.));+#36 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#37 = ORIENTED_EDGE('',*,*,#21,.T.);+#38 = ORIENTED_EDGE('',*,*,#39,.F.);+#39 = EDGE_CURVE('',#24,#24,#40,.T.);+#40 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#41,#42,#43,#44,#45,#46,#47,+#48,#49,#50,#51,#52,#53,#54),.UNSPECIFIED.,.T.,.F.)+B_SPLINE_CURVE_WITH_KNOTS((14,14),(6.213111017846E-16,31.415926535898),+.PIECEWISE_BEZIER_KNOTS.) CURVE() GEOMETRIC_REPRESENTATION_ITEM()+RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999997,+1.000000000006,0.99999999999,1.000000000011,0.99999999999,+1.000000000008,0.999999999995,1.000000000002,0.999999999999,1.,1.))+REPRESENTATION_ITEM('') );+#41 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.352277442495));+#42 = CARTESIAN_POINT('',(-5.000000000003,2.381651773529,2.352277442495)+);+#43 = CARTESIAN_POINT('',(-3.769083784592,4.818226231738,2.352277442495)+);+#44 = CARTESIAN_POINT('',(-1.23603057165,6.560480641773,2.352277442495)+);+#45 = CARTESIAN_POINT('',(2.249772170806,6.828057715712,2.352277442495)+);+#46 = CARTESIAN_POINT('',(5.261090838749,4.971090302087,2.352277442495)+);+#47 = CARTESIAN_POINT('',(7.469576757511,2.260332741401,2.352277442495)+);+#48 = CARTESIAN_POINT('',(7.469576757546,-2.26033274145,2.352277442495)+);+#49 = CARTESIAN_POINT('',(5.261090838759,-4.971090302,2.352277442495));+#50 = CARTESIAN_POINT('',(2.249772170765,-6.828057715787,2.352277442495)+);+#51 = CARTESIAN_POINT('',(-1.236030571611,-6.560480641737,2.352277442495+));+#52 = CARTESIAN_POINT('',(-3.769083784611,-4.818226231748,2.352277442495+));+#53 = CARTESIAN_POINT('',(-4.999999999998,-2.381651773528,2.352277442495+));+#54 = CARTESIAN_POINT('',(-5.,-6.123233995737E-16,2.352277442495));+#55 = CYLINDRICAL_SURFACE('',#56,5.);+#56 = AXIS2_PLACEMENT_3D('',#57,#58,#59);+#57 = CARTESIAN_POINT('',(0.,0.,0.65));+#58 = DIRECTION('',(0.,0.,1.));+#59 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#60 = ADVANCED_FACE('',(#61),#81,.T.);+#61 = FACE_BOUND('',#62,.T.);+#62 = EDGE_LOOP('',(#63,#64,#73,#80));+#63 = ORIENTED_EDGE('',*,*,#31,.T.);+#64 = ORIENTED_EDGE('',*,*,#65,.T.);+#65 = EDGE_CURVE('',#22,#66,#68,.T.);+#66 = VERTEX_POINT('',#67);+#67 = CARTESIAN_POINT('',(-4.333333333333,5.306802796305E-16,0.65));+#68 = CIRCLE('',#69,0.666666666667);+#69 = AXIS2_PLACEMENT_3D('',#70,#71,#72);+#70 = CARTESIAN_POINT('',(-4.333333333333,5.306802796305E-16,+1.316666666667));+#71 = DIRECTION('',(-1.224646799147E-16,-1.,-0.));+#72 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#73 = ORIENTED_EDGE('',*,*,#74,.F.);+#74 = EDGE_CURVE('',#66,#66,#75,.T.);+#75 = CIRCLE('',#76,4.333333333333);+#76 = AXIS2_PLACEMENT_3D('',#77,#78,#79);+#77 = CARTESIAN_POINT('',(0.,0.,0.65));+#78 = DIRECTION('',(0.,0.,-1.));+#79 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#80 = ORIENTED_EDGE('',*,*,#65,.F.);+#81 = TOROIDAL_SURFACE('',#82,4.333333333333,0.666666666667);+#82 = AXIS2_PLACEMENT_3D('',#83,#84,#85);+#83 = CARTESIAN_POINT('',(0.,0.,1.316666666667));+#84 = DIRECTION('',(0.,0.,-1.));+#85 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#86 = ADVANCED_FACE('',(#87),#116,.T.);+#87 = FACE_BOUND('',#88,.T.);+#88 = EDGE_LOOP('',(#89,#97,#114,#115));+#89 = ORIENTED_EDGE('',*,*,#90,.T.);+#90 = EDGE_CURVE('',#24,#91,#93,.T.);+#91 = VERTEX_POINT('',#92);+#92 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+2.402070402268));+#93 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#94,#95,#96),.UNSPECIFIED.,.F.+,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,31.415926535898),+.PIECEWISE_BEZIER_KNOTS.) CURVE() GEOMETRIC_REPRESENTATION_ITEM()+RATIONAL_B_SPLINE_CURVE((1.,0.738548945876,1.)) REPRESENTATION_ITEM('')+);+#94 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.352277442495));+#95 = CARTESIAN_POINT('',(-5.,5.394650135827E-16,2.397920988954));+#96 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+2.402070402268));+#97 = ORIENTED_EDGE('',*,*,#98,.T.);+#98 = EDGE_CURVE('',#91,#91,#99,.T.);+#99 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#100,#101,#102,#103,#104,#105+,#106,#107,#108,#109,#110,#111,#112,#113),.UNSPECIFIED.,.T.,.F.)+B_SPLINE_CURVE_WITH_KNOTS((14,14),(6.213111017846E-16,31.415926535898),+.PIECEWISE_BEZIER_KNOTS.) CURVE() GEOMETRIC_REPRESENTATION_ITEM()+RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999997,+1.000000000006,0.99999999999,1.000000000011,0.99999999999,+1.000000000008,0.999999999995,1.000000000002,0.999999999999,1.,1.))+REPRESENTATION_ITEM('') );+#100 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+2.402070402268));+#101 = CARTESIAN_POINT('',(-4.954545454548,2.360000393769,2.402070402268+));+#102 = CARTESIAN_POINT('',(-3.73481938655,4.774424175086,2.402070402268)+);+#103 = CARTESIAN_POINT('',(-1.224793930091,6.500839908667,2.402070402268+));+#104 = CARTESIAN_POINT('',(2.229319696528,6.765984463749,2.402070402268)+);+#105 = CARTESIAN_POINT('',(5.213262740212,4.92589857207,2.402070402268)+);+#106 = CARTESIAN_POINT('',(7.401671514264,2.239784261931,2.402070402268)+);+#107 = CARTESIAN_POINT('',(7.401671514293,-2.239784261978,2.402070402268+));+#108 = CARTESIAN_POINT('',(5.213262740226,-4.925898571987,2.402070402268+));+#109 = CARTESIAN_POINT('',(2.229319696485,-6.765984463822,2.402070402268+));+#110 = CARTESIAN_POINT('',(-1.224793930051,-6.500839908633,+2.402070402268));+#111 = CARTESIAN_POINT('',(-3.734819386569,-4.774424175095,+2.402070402268));+#112 = CARTESIAN_POINT('',(-4.954545454544,-2.360000393769,+2.402070402268));+#113 = CARTESIAN_POINT('',(-4.954545454545,-6.067568232139E-16,+2.402070402268));+#114 = ORIENTED_EDGE('',*,*,#90,.F.);+#115 = ORIENTED_EDGE('',*,*,#39,.F.);+#116 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,(+(#117,#118,#119,#120,#121,#122,#123,#124,#125,#126,#127,#128,#129+,#130)+,(#131,#132,#133,#134,#135,#136,#137,#138,#139,#140,#141,#142,#143+,#144)+,(#145,#146,#147,#148,#149,#150,#151,#152,#153,#154,#155,#156,#157+,#158+)),.UNSPECIFIED.,.F.,.T.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(14,+14),(0.,31.415926535898),(6.213111017846E-16,31.415926535898),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM()+RATIONAL_B_SPLINE_SURFACE((+(1.,1.,1.000000000001,0.999999999997,1.000000000006,0.99999999999+,1.000000000011,0.99999999999,1.000000000008,0.999999999995+,1.000000000002,0.999999999999,1.,1.)+,(0.738548945876,0.738548945876,0.738548945877,0.738548945873+,0.738548945882,0.738548945867,0.738548945886,0.738548945866+,0.738548945883,0.738548945871,0.738548945878,0.738548945875+,0.738548945876,0.738548945876)+,(1.,1.,1.000000000001,0.999999999997,1.000000000006,0.99999999999+,1.000000000011,0.99999999999,1.000000000008,0.999999999995+,1.000000000002,0.999999999999,1.,1.+))) REPRESENTATION_ITEM('') SURFACE() );+#117 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.352277442495));+#118 = CARTESIAN_POINT('',(-5.000000000003,2.381651773529,2.352277442495+));+#119 = CARTESIAN_POINT('',(-3.769083784592,4.818226231738,2.352277442495+));+#120 = CARTESIAN_POINT('',(-1.23603057165,6.560480641773,2.352277442495)+);+#121 = CARTESIAN_POINT('',(2.249772170806,6.828057715712,2.352277442495)+);+#122 = CARTESIAN_POINT('',(5.261090838749,4.971090302087,2.352277442495)+);+#123 = CARTESIAN_POINT('',(7.469576757511,2.260332741401,2.352277442495)+);+#124 = CARTESIAN_POINT('',(7.469576757546,-2.26033274145,2.352277442495)+);+#125 = CARTESIAN_POINT('',(5.261090838759,-4.971090302,2.352277442495));+#126 = CARTESIAN_POINT('',(2.249772170765,-6.828057715787,2.352277442495+));+#127 = CARTESIAN_POINT('',(-1.236030571611,-6.560480641737,+2.352277442495));+#128 = CARTESIAN_POINT('',(-3.769083784611,-4.818226231748,+2.352277442495));+#129 = CARTESIAN_POINT('',(-4.999999999998,-2.381651773528,+2.352277442495));+#130 = CARTESIAN_POINT('',(-5.,-6.123233995737E-16,2.352277442495));+#131 = CARTESIAN_POINT('',(-5.,5.394650135827E-16,2.397920988954));+#132 = CARTESIAN_POINT('',(-5.000000000003,2.381651773529,2.397920988954+));+#133 = CARTESIAN_POINT('',(-3.76908378459,4.818226231737,2.397920988954)+);+#134 = CARTESIAN_POINT('',(-1.236030571653,6.560480641776,2.397920988954+));+#135 = CARTESIAN_POINT('',(2.249772170807,6.828057715706,2.397920988954)+);+#136 = CARTESIAN_POINT('',(5.261090838754,4.971090302092,2.397920988953)+);+#137 = CARTESIAN_POINT('',(7.469576757498,2.260332741402,2.397920988954)+);+#138 = CARTESIAN_POINT('',(7.469576757561,-2.260332741463,2.397920988953+));+#139 = CARTESIAN_POINT('',(5.26109083875,-4.971090301982,2.397920988954)+);+#140 = CARTESIAN_POINT('',(2.249772170767,-6.828057715803,2.397920988954+));+#141 = CARTESIAN_POINT('',(-1.236030571609,-6.560480641729,+2.397920988954));+#142 = CARTESIAN_POINT('',(-3.769083784613,-4.81822623175,2.397920988954+));+#143 = CARTESIAN_POINT('',(-4.999999999998,-2.381651773527,+2.397920988954));+#144 = CARTESIAN_POINT('',(-5.,5.690726375496E-15,2.397920988954));+#145 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+2.402070402268));+#146 = CARTESIAN_POINT('',(-4.954545454548,2.360000393769,2.402070402268+));+#147 = CARTESIAN_POINT('',(-3.73481938655,4.774424175086,2.402070402268)+);+#148 = CARTESIAN_POINT('',(-1.224793930091,6.500839908667,2.402070402268+));+#149 = CARTESIAN_POINT('',(2.229319696528,6.765984463749,2.402070402268)+);+#150 = CARTESIAN_POINT('',(5.213262740212,4.92589857207,2.402070402268)+);+#151 = CARTESIAN_POINT('',(7.401671514264,2.239784261931,2.402070402268)+);+#152 = CARTESIAN_POINT('',(7.401671514293,-2.239784261978,2.402070402268+));+#153 = CARTESIAN_POINT('',(5.213262740226,-4.925898571987,2.402070402268+));+#154 = CARTESIAN_POINT('',(2.229319696485,-6.765984463822,2.402070402268+));+#155 = CARTESIAN_POINT('',(-1.224793930051,-6.500839908633,+2.402070402268));+#156 = CARTESIAN_POINT('',(-3.734819386569,-4.774424175095,+2.402070402268));+#157 = CARTESIAN_POINT('',(-4.954545454544,-2.360000393769,+2.402070402268));+#158 = CARTESIAN_POINT('',(-4.954545454545,-6.067568232139E-16,+2.402070402268));+#159 = ADVANCED_FACE('',(#160,#230),#233,.T.);+#160 = FACE_BOUND('',#161,.T.);+#161 = EDGE_LOOP('',(#162,#172,#181,#189,#198,#206,#215,#223));+#162 = ORIENTED_EDGE('',*,*,#163,.T.);+#163 = EDGE_CURVE('',#164,#166,#168,.T.);+#164 = VERTEX_POINT('',#165);+#165 = CARTESIAN_POINT('',(-5.15,0.719374728497,0.65));+#166 = VERTEX_POINT('',#167);+#167 = CARTESIAN_POINT('',(-5.15,-0.719374728497,0.65));+#168 = LINE('',#169,#170);+#169 = CARTESIAN_POINT('',(-5.15,2.075,0.65));+#170 = VECTOR('',#171,1.);+#171 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#172 = ORIENTED_EDGE('',*,*,#173,.T.);+#173 = EDGE_CURVE('',#166,#174,#176,.T.);+#174 = VERTEX_POINT('',#175);+#175 = CARTESIAN_POINT('',(-0.719374728497,-5.15,0.65));+#176 = CIRCLE('',#177,5.2);+#177 = AXIS2_PLACEMENT_3D('',#178,#179,#180);+#178 = CARTESIAN_POINT('',(0.,0.,0.65));+#179 = DIRECTION('',(0.,0.,1.));+#180 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#181 = ORIENTED_EDGE('',*,*,#182,.T.);+#182 = EDGE_CURVE('',#174,#183,#185,.T.);+#183 = VERTEX_POINT('',#184);+#184 = CARTESIAN_POINT('',(0.719374728497,-5.15,0.65));+#185 = LINE('',#186,#187);+#186 = CARTESIAN_POINT('',(-2.075,-5.15,0.65));+#187 = VECTOR('',#188,1.);+#188 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#189 = ORIENTED_EDGE('',*,*,#190,.T.);+#190 = EDGE_CURVE('',#183,#191,#193,.T.);+#191 = VERTEX_POINT('',#192);+#192 = CARTESIAN_POINT('',(5.15,-0.719374728497,0.65));+#193 = CIRCLE('',#194,5.2);+#194 = AXIS2_PLACEMENT_3D('',#195,#196,#197);+#195 = CARTESIAN_POINT('',(0.,0.,0.65));+#196 = DIRECTION('',(0.,0.,1.));+#197 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#198 = ORIENTED_EDGE('',*,*,#199,.T.);+#199 = EDGE_CURVE('',#191,#200,#202,.T.);+#200 = VERTEX_POINT('',#201);+#201 = CARTESIAN_POINT('',(5.15,0.719374728497,0.65));+#202 = LINE('',#203,#204);+#203 = CARTESIAN_POINT('',(5.15,-2.575,0.65));+#204 = VECTOR('',#205,1.);+#205 = DIRECTION('',(1.224646799147E-16,1.,0.));+#206 = ORIENTED_EDGE('',*,*,#207,.T.);+#207 = EDGE_CURVE('',#200,#208,#210,.T.);+#208 = VERTEX_POINT('',#209);+#209 = CARTESIAN_POINT('',(0.719374728497,5.15,0.65));+#210 = CIRCLE('',#211,5.2);+#211 = AXIS2_PLACEMENT_3D('',#212,#213,#214);+#212 = CARTESIAN_POINT('',(0.,0.,0.65));+#213 = DIRECTION('',(0.,0.,1.));+#214 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#215 = ORIENTED_EDGE('',*,*,#216,.T.);+#216 = EDGE_CURVE('',#208,#217,#219,.T.);+#217 = VERTEX_POINT('',#218);+#218 = CARTESIAN_POINT('',(-0.719374728497,5.15,0.65));+#219 = LINE('',#220,#221);+#220 = CARTESIAN_POINT('',(2.575,5.15,0.65));+#221 = VECTOR('',#222,1.);+#222 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#223 = ORIENTED_EDGE('',*,*,#224,.T.);+#224 = EDGE_CURVE('',#217,#164,#225,.T.);+#225 = CIRCLE('',#226,5.2);+#226 = AXIS2_PLACEMENT_3D('',#227,#228,#229);+#227 = CARTESIAN_POINT('',(0.,0.,0.65));+#228 = DIRECTION('',(0.,0.,1.));+#229 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#230 = FACE_BOUND('',#231,.T.);+#231 = EDGE_LOOP('',(#232));+#232 = ORIENTED_EDGE('',*,*,#74,.T.);+#233 = PLANE('',#234);+#234 = AXIS2_PLACEMENT_3D('',#235,#236,#237);+#235 = CARTESIAN_POINT('',(2.629692562576E-16,-5.069714440537E-17,0.65)+);+#236 = DIRECTION('',(0.,0.,1.));+#237 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#238 = ADVANCED_FACE('',(#239),#269,.F.);+#239 = FACE_BOUND('',#240,.F.);+#240 = EDGE_LOOP('',(#241,#250,#251,#252));+#241 = ORIENTED_EDGE('',*,*,#242,.F.);+#242 = EDGE_CURVE('',#91,#243,#245,.T.);+#243 = VERTEX_POINT('',#244);+#244 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+3.397929597732));+#245 = CIRCLE('',#246,0.5);+#246 = AXIS2_PLACEMENT_3D('',#247,#248,#249);+#247 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.9));+#248 = DIRECTION('',(-1.224646799147E-16,-1.,-0.));+#249 = DIRECTION('',(0.,0.,-1.));+#250 = ORIENTED_EDGE('',*,*,#98,.T.);+#251 = ORIENTED_EDGE('',*,*,#242,.T.);+#252 = ORIENTED_EDGE('',*,*,#253,.F.);+#253 = EDGE_CURVE('',#243,#243,#254,.T.);+#254 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#255,#256,#257,#258,#259,+#260,#261,#262,#263,#264,#265,#266,#267,#268),.UNSPECIFIED.,.T.,.F.)+B_SPLINE_CURVE_WITH_KNOTS((14,14),(6.213111017846E-16,31.415926535898),+.PIECEWISE_BEZIER_KNOTS.) CURVE() GEOMETRIC_REPRESENTATION_ITEM()+RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999997,+1.000000000006,0.99999999999,1.000000000011,0.99999999999,+1.000000000008,0.999999999995,1.000000000002,0.999999999999,1.,1.))+REPRESENTATION_ITEM('') );+#255 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+3.397929597732));+#256 = CARTESIAN_POINT('',(-4.954545454548,2.360000393769,3.397929597732+));+#257 = CARTESIAN_POINT('',(-3.73481938655,4.774424175087,3.397929597732)+);+#258 = CARTESIAN_POINT('',(-1.22479393009,6.500839908663,3.397929597732)+);+#259 = CARTESIAN_POINT('',(2.229319696526,6.765984463757,3.397929597732)+);+#260 = CARTESIAN_POINT('',(5.213262740214,4.925898572058,3.397929597732)+);+#261 = CARTESIAN_POINT('',(7.401671514262,2.239784261947,3.397929597732)+);+#262 = CARTESIAN_POINT('',(7.401671514295,-2.239784261995,3.397929597732+));+#263 = CARTESIAN_POINT('',(5.213262740226,-4.925898571972,3.397929597732+));+#264 = CARTESIAN_POINT('',(2.229319696486,-6.765984463832,3.397929597732+));+#265 = CARTESIAN_POINT('',(-1.224793930051,-6.500839908627,+3.397929597732));+#266 = CARTESIAN_POINT('',(-3.734819386569,-4.774424175097,+3.397929597732));+#267 = CARTESIAN_POINT('',(-4.954545454544,-2.360000393768,+3.397929597732));+#268 = CARTESIAN_POINT('',(-4.954545454545,-6.067568232139E-16,+3.397929597732));+#269 = SURFACE_OF_REVOLUTION('',#270,#275);+#270 = CIRCLE('',#271,0.5);+#271 = AXIS2_PLACEMENT_3D('',#272,#273,#274);+#272 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,2.9));+#273 = DIRECTION('',(-1.224646799147E-16,-1.,-0.));+#274 = DIRECTION('',(0.,0.,-1.));+#275 = AXIS1_PLACEMENT('',#276,#277);+#276 = CARTESIAN_POINT('',(0.,0.,0.65));+#277 = DIRECTION('',(-0.,0.,-1.));+#278 = ADVANCED_FACE('',(#279),#352,.F.);+#279 = FACE_BOUND('',#280,.F.);+#280 = EDGE_LOOP('',(#281,#291,#299,#307,#313,#314,#322,#330,#338,#346)+);+#281 = ORIENTED_EDGE('',*,*,#282,.F.);+#282 = EDGE_CURVE('',#283,#285,#287,.T.);+#283 = VERTEX_POINT('',#284);+#284 = CARTESIAN_POINT('',(-5.15,4.15,0.15));+#285 = VERTEX_POINT('',#286);+#286 = CARTESIAN_POINT('',(-5.15,0.45,0.15));+#287 = LINE('',#288,#289);+#288 = CARTESIAN_POINT('',(-5.15,4.15,0.15));+#289 = VECTOR('',#290,1.);+#290 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#291 = ORIENTED_EDGE('',*,*,#292,.T.);+#292 = EDGE_CURVE('',#283,#293,#295,.T.);+#293 = VERTEX_POINT('',#294);+#294 = CARTESIAN_POINT('',(-5.15,4.15,0.85));+#295 = LINE('',#296,#297);+#296 = CARTESIAN_POINT('',(-5.15,4.15,0.15));+#297 = VECTOR('',#298,1.);+#298 = DIRECTION('',(0.,0.,1.));+#299 = ORIENTED_EDGE('',*,*,#300,.T.);+#300 = EDGE_CURVE('',#293,#301,#303,.T.);+#301 = VERTEX_POINT('',#302);+#302 = CARTESIAN_POINT('',(-5.15,0.719374728497,0.85));+#303 = LINE('',#304,#305);+#304 = CARTESIAN_POINT('',(-5.15,5.15,0.85));+#305 = VECTOR('',#306,1.);+#306 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#307 = ORIENTED_EDGE('',*,*,#308,.T.);+#308 = EDGE_CURVE('',#301,#164,#309,.T.);+#309 = LINE('',#310,#311);+#310 = CARTESIAN_POINT('',(-5.15,0.719374728497,0.65));+#311 = VECTOR('',#312,1.);+#312 = DIRECTION('',(0.,0.,-1.));+#313 = ORIENTED_EDGE('',*,*,#163,.T.);+#314 = ORIENTED_EDGE('',*,*,#315,.F.);+#315 = EDGE_CURVE('',#316,#166,#318,.T.);+#316 = VERTEX_POINT('',#317);+#317 = CARTESIAN_POINT('',(-5.15,-0.719374728497,0.85));+#318 = LINE('',#319,#320);+#319 = CARTESIAN_POINT('',(-5.15,-0.719374728497,0.65));+#320 = VECTOR('',#321,1.);+#321 = DIRECTION('',(0.,0.,-1.));+#322 = ORIENTED_EDGE('',*,*,#323,.T.);+#323 = EDGE_CURVE('',#316,#324,#326,.T.);+#324 = VERTEX_POINT('',#325);+#325 = CARTESIAN_POINT('',(-5.15,-4.15,0.85));+#326 = LINE('',#327,#328);+#327 = CARTESIAN_POINT('',(-5.15,5.15,0.85));+#328 = VECTOR('',#329,1.);+#329 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#330 = ORIENTED_EDGE('',*,*,#331,.F.);+#331 = EDGE_CURVE('',#332,#324,#334,.T.);+#332 = VERTEX_POINT('',#333);+#333 = CARTESIAN_POINT('',(-5.15,-4.15,0.15));+#334 = LINE('',#335,#336);+#335 = CARTESIAN_POINT('',(-5.15,-4.15,0.15));+#336 = VECTOR('',#337,1.);+#337 = DIRECTION('',(0.,0.,1.));+#338 = ORIENTED_EDGE('',*,*,#339,.F.);+#339 = EDGE_CURVE('',#340,#332,#342,.T.);+#340 = VERTEX_POINT('',#341);+#341 = CARTESIAN_POINT('',(-5.15,-0.45,0.15));+#342 = LINE('',#343,#344);+#343 = CARTESIAN_POINT('',(-5.15,4.15,0.15));+#344 = VECTOR('',#345,1.);+#345 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#346 = ORIENTED_EDGE('',*,*,#347,.F.);+#347 = EDGE_CURVE('',#285,#340,#348,.T.);+#348 = LINE('',#349,#350);+#349 = CARTESIAN_POINT('',(-5.15,4.15,0.15));+#350 = VECTOR('',#351,1.);+#351 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#352 = PLANE('',#353);+#353 = AXIS2_PLACEMENT_3D('',#354,#355,#356);+#354 = CARTESIAN_POINT('',(-5.15,4.15,0.15));+#355 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#356 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#357 = ADVANCED_FACE('',(#358),#377,.F.);+#358 = FACE_BOUND('',#359,.T.);+#359 = EDGE_LOOP('',(#360,#369,#370,#371));+#360 = ORIENTED_EDGE('',*,*,#361,.F.);+#361 = EDGE_CURVE('',#301,#362,#364,.T.);+#362 = VERTEX_POINT('',#363);+#363 = CARTESIAN_POINT('',(-0.719374728497,5.15,0.85));+#364 = CIRCLE('',#365,5.2);+#365 = AXIS2_PLACEMENT_3D('',#366,#367,#368);+#366 = CARTESIAN_POINT('',(0.,0.,0.85));+#367 = DIRECTION('',(0.,0.,-1.));+#368 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#369 = ORIENTED_EDGE('',*,*,#308,.T.);+#370 = ORIENTED_EDGE('',*,*,#224,.F.);+#371 = ORIENTED_EDGE('',*,*,#372,.F.);+#372 = EDGE_CURVE('',#362,#217,#373,.T.);+#373 = LINE('',#374,#375);+#374 = CARTESIAN_POINT('',(-0.719374728497,5.15,0.65));+#375 = VECTOR('',#376,1.);+#376 = DIRECTION('',(0.,0.,-1.));+#377 = CYLINDRICAL_SURFACE('',#378,5.2);+#378 = AXIS2_PLACEMENT_3D('',#379,#380,#381);+#379 = CARTESIAN_POINT('',(0.,0.,0.65));+#380 = DIRECTION('',(0.,0.,-1.));+#381 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#382 = ADVANCED_FACE('',(#383),#402,.F.);+#383 = FACE_BOUND('',#384,.T.);+#384 = EDGE_LOOP('',(#385,#386,#387,#396));+#385 = ORIENTED_EDGE('',*,*,#173,.F.);+#386 = ORIENTED_EDGE('',*,*,#315,.F.);+#387 = ORIENTED_EDGE('',*,*,#388,.F.);+#388 = EDGE_CURVE('',#389,#316,#391,.T.);+#389 = VERTEX_POINT('',#390);+#390 = CARTESIAN_POINT('',(-0.719374728497,-5.15,0.85));+#391 = CIRCLE('',#392,5.2);+#392 = AXIS2_PLACEMENT_3D('',#393,#394,#395);+#393 = CARTESIAN_POINT('',(0.,0.,0.85));+#394 = DIRECTION('',(0.,0.,-1.));+#395 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#396 = ORIENTED_EDGE('',*,*,#397,.T.);+#397 = EDGE_CURVE('',#389,#174,#398,.T.);+#398 = LINE('',#399,#400);+#399 = CARTESIAN_POINT('',(-0.719374728497,-5.15,0.65));+#400 = VECTOR('',#401,1.);+#401 = DIRECTION('',(0.,0.,-1.));+#402 = CYLINDRICAL_SURFACE('',#403,5.2);+#403 = AXIS2_PLACEMENT_3D('',#404,#405,#406);+#404 = CARTESIAN_POINT('',(0.,0.,0.65));+#405 = DIRECTION('',(0.,0.,-1.));+#406 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#407 = ADVANCED_FACE('',(#408),#458,.F.);+#408 = FACE_BOUND('',#409,.F.);+#409 = EDGE_LOOP('',(#410,#420,#428,#436,#442,#443,#444,#452));+#410 = ORIENTED_EDGE('',*,*,#411,.F.);+#411 = EDGE_CURVE('',#412,#414,#416,.T.);+#412 = VERTEX_POINT('',#413);+#413 = CARTESIAN_POINT('',(4.75,5.15,0.15));+#414 = VERTEX_POINT('',#415);+#415 = CARTESIAN_POINT('',(-4.15,5.15,0.15));+#416 = LINE('',#417,#418);+#417 = CARTESIAN_POINT('',(5.15,5.15,0.15));+#418 = VECTOR('',#419,1.);+#419 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#420 = ORIENTED_EDGE('',*,*,#421,.T.);+#421 = EDGE_CURVE('',#412,#422,#424,.T.);+#422 = VERTEX_POINT('',#423);+#423 = CARTESIAN_POINT('',(4.75,5.15,1.15));+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(4.75,5.15,0.15));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(0.,0.,1.));+#428 = ORIENTED_EDGE('',*,*,#429,.T.);+#429 = EDGE_CURVE('',#422,#430,#432,.T.);+#430 = VERTEX_POINT('',#431);+#431 = CARTESIAN_POINT('',(0.719374728497,5.15,1.15));+#432 = LINE('',#433,#434);+#433 = CARTESIAN_POINT('',(5.15,5.15,1.15));+#434 = VECTOR('',#435,1.);+#435 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#436 = ORIENTED_EDGE('',*,*,#437,.T.);+#437 = EDGE_CURVE('',#430,#208,#438,.T.);+#438 = LINE('',#439,#440);+#439 = CARTESIAN_POINT('',(0.719374728497,5.15,0.65));+#440 = VECTOR('',#441,1.);+#441 = DIRECTION('',(0.,0.,-1.));+#442 = ORIENTED_EDGE('',*,*,#216,.T.);+#443 = ORIENTED_EDGE('',*,*,#372,.F.);+#444 = ORIENTED_EDGE('',*,*,#445,.T.);+#445 = EDGE_CURVE('',#362,#446,#448,.T.);+#446 = VERTEX_POINT('',#447);+#447 = CARTESIAN_POINT('',(-4.15,5.15,0.85));+#448 = LINE('',#449,#450);+#449 = CARTESIAN_POINT('',(6.306931015609E-16,5.15,0.85));+#450 = VECTOR('',#451,1.);+#451 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#452 = ORIENTED_EDGE('',*,*,#453,.F.);+#453 = EDGE_CURVE('',#414,#446,#454,.T.);+#454 = LINE('',#455,#456);+#455 = CARTESIAN_POINT('',(-4.15,5.15,0.15));+#456 = VECTOR('',#457,1.);+#457 = DIRECTION('',(0.,0.,1.));+#458 = PLANE('',#459);+#459 = AXIS2_PLACEMENT_3D('',#460,#461,#462);+#460 = CARTESIAN_POINT('',(5.15,5.15,0.15));+#461 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#462 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#463 = ADVANCED_FACE('',(#464),#514,.F.);+#464 = FACE_BOUND('',#465,.F.);+#465 = EDGE_LOOP('',(#466,#476,#484,#492,#498,#499,#500,#508));+#466 = ORIENTED_EDGE('',*,*,#467,.F.);+#467 = EDGE_CURVE('',#468,#470,#472,.T.);+#468 = VERTEX_POINT('',#469);+#469 = CARTESIAN_POINT('',(4.75,-5.15,0.15));+#470 = VERTEX_POINT('',#471);+#471 = CARTESIAN_POINT('',(4.75,-5.15,1.15));+#472 = LINE('',#473,#474);+#473 = CARTESIAN_POINT('',(4.75,-5.15,0.15));+#474 = VECTOR('',#475,1.);+#475 = DIRECTION('',(0.,0.,1.));+#476 = ORIENTED_EDGE('',*,*,#477,.F.);+#477 = EDGE_CURVE('',#478,#468,#480,.T.);+#478 = VERTEX_POINT('',#479);+#479 = CARTESIAN_POINT('',(-4.15,-5.15,0.15));+#480 = LINE('',#481,#482);+#481 = CARTESIAN_POINT('',(-4.15,-5.15,0.15));+#482 = VECTOR('',#483,1.);+#483 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#484 = ORIENTED_EDGE('',*,*,#485,.T.);+#485 = EDGE_CURVE('',#478,#486,#488,.T.);+#486 = VERTEX_POINT('',#487);+#487 = CARTESIAN_POINT('',(-4.15,-5.15,0.85));+#488 = LINE('',#489,#490);+#489 = CARTESIAN_POINT('',(-4.15,-5.15,0.15));+#490 = VECTOR('',#491,1.);+#491 = DIRECTION('',(0.,0.,1.));+#492 = ORIENTED_EDGE('',*,*,#493,.F.);+#493 = EDGE_CURVE('',#389,#486,#494,.T.);+#494 = LINE('',#495,#496);+#495 = CARTESIAN_POINT('',(-6.306931015609E-16,-5.15,0.85));+#496 = VECTOR('',#497,1.);+#497 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#498 = ORIENTED_EDGE('',*,*,#397,.T.);+#499 = ORIENTED_EDGE('',*,*,#182,.T.);+#500 = ORIENTED_EDGE('',*,*,#501,.F.);+#501 = EDGE_CURVE('',#502,#183,#504,.T.);+#502 = VERTEX_POINT('',#503);+#503 = CARTESIAN_POINT('',(0.719374728497,-5.15,1.15));+#504 = LINE('',#505,#506);+#505 = CARTESIAN_POINT('',(0.719374728497,-5.15,0.65));+#506 = VECTOR('',#507,1.);+#507 = DIRECTION('',(0.,0.,-1.));+#508 = ORIENTED_EDGE('',*,*,#509,.T.);+#509 = EDGE_CURVE('',#502,#470,#510,.T.);+#510 = LINE('',#511,#512);+#511 = CARTESIAN_POINT('',(-4.15,-5.15,1.15));+#512 = VECTOR('',#513,1.);+#513 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#514 = PLANE('',#515);+#515 = AXIS2_PLACEMENT_3D('',#516,#517,#518);+#516 = CARTESIAN_POINT('',(-4.15,-5.15,0.15));+#517 = DIRECTION('',(1.224646799147E-16,1.,0.));+#518 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#519 = ADVANCED_FACE('',(#520),#539,.F.);+#520 = FACE_BOUND('',#521,.T.);+#521 = EDGE_LOOP('',(#522,#523,#524,#532));+#522 = ORIENTED_EDGE('',*,*,#437,.T.);+#523 = ORIENTED_EDGE('',*,*,#207,.F.);+#524 = ORIENTED_EDGE('',*,*,#525,.F.);+#525 = EDGE_CURVE('',#526,#200,#528,.T.);+#526 = VERTEX_POINT('',#527);+#527 = CARTESIAN_POINT('',(5.15,0.719374728497,1.15));+#528 = LINE('',#529,#530);+#529 = CARTESIAN_POINT('',(5.15,0.719374728497,0.65));+#530 = VECTOR('',#531,1.);+#531 = DIRECTION('',(0.,0.,-1.));+#532 = ORIENTED_EDGE('',*,*,#533,.T.);+#533 = EDGE_CURVE('',#526,#430,#534,.T.);+#534 = CIRCLE('',#535,5.2);+#535 = AXIS2_PLACEMENT_3D('',#536,#537,#538);+#536 = CARTESIAN_POINT('',(0.,0.,1.15));+#537 = DIRECTION('',(0.,0.,1.));+#538 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#539 = CYLINDRICAL_SURFACE('',#540,5.2);+#540 = AXIS2_PLACEMENT_3D('',#541,#542,#543);+#541 = CARTESIAN_POINT('',(0.,0.,0.65));+#542 = DIRECTION('',(0.,0.,-1.));+#543 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#544 = ADVANCED_FACE('',(#545),#564,.F.);+#545 = FACE_BOUND('',#546,.T.);+#546 = EDGE_LOOP('',(#547,#548,#549,#558));+#547 = ORIENTED_EDGE('',*,*,#190,.F.);+#548 = ORIENTED_EDGE('',*,*,#501,.F.);+#549 = ORIENTED_EDGE('',*,*,#550,.T.);+#550 = EDGE_CURVE('',#502,#551,#553,.T.);+#551 = VERTEX_POINT('',#552);+#552 = CARTESIAN_POINT('',(5.15,-0.719374728497,1.15));+#553 = CIRCLE('',#554,5.2);+#554 = AXIS2_PLACEMENT_3D('',#555,#556,#557);+#555 = CARTESIAN_POINT('',(0.,0.,1.15));+#556 = DIRECTION('',(0.,0.,1.));+#557 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#558 = ORIENTED_EDGE('',*,*,#559,.T.);+#559 = EDGE_CURVE('',#551,#191,#560,.T.);+#560 = LINE('',#561,#562);+#561 = CARTESIAN_POINT('',(5.15,-0.719374728497,0.65));+#562 = VECTOR('',#563,1.);+#563 = DIRECTION('',(0.,0.,-1.));+#564 = CYLINDRICAL_SURFACE('',#565,5.2);+#565 = AXIS2_PLACEMENT_3D('',#566,#567,#568);+#566 = CARTESIAN_POINT('',(0.,0.,0.65));+#567 = DIRECTION('',(0.,0.,-1.));+#568 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#569 = ADVANCED_FACE('',(#570),#629,.F.);+#570 = FACE_BOUND('',#571,.F.);+#571 = EDGE_LOOP('',(#572,#582,#590,#596,#597,#598,#599,#607,#615,#623)+);+#572 = ORIENTED_EDGE('',*,*,#573,.F.);+#573 = EDGE_CURVE('',#574,#576,#578,.T.);+#574 = VERTEX_POINT('',#575);+#575 = CARTESIAN_POINT('',(5.15,-4.75,0.15));+#576 = VERTEX_POINT('',#577);+#577 = CARTESIAN_POINT('',(5.15,-0.45,0.15));+#578 = LINE('',#579,#580);+#579 = CARTESIAN_POINT('',(5.15,-5.15,0.15));+#580 = VECTOR('',#581,1.);+#581 = DIRECTION('',(1.224646799147E-16,1.,0.));+#582 = ORIENTED_EDGE('',*,*,#583,.T.);+#583 = EDGE_CURVE('',#574,#584,#586,.T.);+#584 = VERTEX_POINT('',#585);+#585 = CARTESIAN_POINT('',(5.15,-4.75,1.15));+#586 = LINE('',#587,#588);+#587 = CARTESIAN_POINT('',(5.15,-4.75,0.15));+#588 = VECTOR('',#589,1.);+#589 = DIRECTION('',(0.,0.,1.));+#590 = ORIENTED_EDGE('',*,*,#591,.T.);+#591 = EDGE_CURVE('',#584,#551,#592,.T.);+#592 = LINE('',#593,#594);+#593 = CARTESIAN_POINT('',(5.15,-5.15,1.15));+#594 = VECTOR('',#595,1.);+#595 = DIRECTION('',(1.224646799147E-16,1.,0.));+#596 = ORIENTED_EDGE('',*,*,#559,.T.);+#597 = ORIENTED_EDGE('',*,*,#199,.T.);+#598 = ORIENTED_EDGE('',*,*,#525,.F.);+#599 = ORIENTED_EDGE('',*,*,#600,.T.);+#600 = EDGE_CURVE('',#526,#601,#603,.T.);+#601 = VERTEX_POINT('',#602);+#602 = CARTESIAN_POINT('',(5.15,4.75,1.15));+#603 = LINE('',#604,#605);+#604 = CARTESIAN_POINT('',(5.15,-5.15,1.15));+#605 = VECTOR('',#606,1.);+#606 = DIRECTION('',(1.224646799147E-16,1.,0.));+#607 = ORIENTED_EDGE('',*,*,#608,.F.);+#608 = EDGE_CURVE('',#609,#601,#611,.T.);+#609 = VERTEX_POINT('',#610);+#610 = CARTESIAN_POINT('',(5.15,4.75,0.15));+#611 = LINE('',#612,#613);+#612 = CARTESIAN_POINT('',(5.15,4.75,0.15));+#613 = VECTOR('',#614,1.);+#614 = DIRECTION('',(0.,0.,1.));+#615 = ORIENTED_EDGE('',*,*,#616,.F.);+#616 = EDGE_CURVE('',#617,#609,#619,.T.);+#617 = VERTEX_POINT('',#618);+#618 = CARTESIAN_POINT('',(5.15,0.45,0.15));+#619 = LINE('',#620,#621);+#620 = CARTESIAN_POINT('',(5.15,-5.15,0.15));+#621 = VECTOR('',#622,1.);+#622 = DIRECTION('',(1.224646799147E-16,1.,0.));+#623 = ORIENTED_EDGE('',*,*,#624,.F.);+#624 = EDGE_CURVE('',#576,#617,#625,.T.);+#625 = LINE('',#626,#627);+#626 = CARTESIAN_POINT('',(5.15,-5.15,0.15));+#627 = VECTOR('',#628,1.);+#628 = DIRECTION('',(1.224646799147E-16,1.,0.));+#629 = PLANE('',#630);+#630 = AXIS2_PLACEMENT_3D('',#631,#632,#633);+#631 = CARTESIAN_POINT('',(5.15,-5.15,0.15));+#632 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#633 = DIRECTION('',(1.224646799147E-16,1.,0.));+#634 = ADVANCED_FACE('',(#635),#664,.T.);+#635 = FACE_BOUND('',#636,.T.);+#636 = EDGE_LOOP('',(#637,#645,#662,#663));+#637 = ORIENTED_EDGE('',*,*,#638,.T.);+#638 = EDGE_CURVE('',#243,#639,#641,.T.);+#639 = VERTEX_POINT('',#640);+#640 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,3.447722557505));+#641 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#642,#643,#644),+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.,+31.415926535898),.PIECEWISE_BEZIER_KNOTS.) CURVE()+GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,+0.738548945876,1.)) REPRESENTATION_ITEM('') );+#642 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+3.397929597732));+#643 = CARTESIAN_POINT('',(-5.,5.569295732177E-15,3.402079011046));+#644 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,3.447722557505));+#645 = ORIENTED_EDGE('',*,*,#646,.T.);+#646 = EDGE_CURVE('',#639,#639,#647,.T.);+#647 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#648,#649,#650,#651,#652,+#653,#654,#655,#656,#657,#658,#659,#660,#661),.UNSPECIFIED.,.T.,.F.)+B_SPLINE_CURVE_WITH_KNOTS((14,14),(6.213111017846E-16,31.415926535898),+.PIECEWISE_BEZIER_KNOTS.) CURVE() GEOMETRIC_REPRESENTATION_ITEM()+RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999997,+1.000000000006,0.99999999999,1.000000000011,0.99999999999,+1.000000000008,0.999999999995,1.000000000002,0.999999999999,1.,1.))+REPRESENTATION_ITEM('') );+#648 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,3.447722557505));+#649 = CARTESIAN_POINT('',(-5.000000000003,2.381651773528,3.447722557505+));+#650 = CARTESIAN_POINT('',(-3.769083784592,4.818226231739,3.447722557505+));+#651 = CARTESIAN_POINT('',(-1.236030571649,6.560480641771,3.447722557505+));+#652 = CARTESIAN_POINT('',(2.249772170804,6.828057715716,3.447722557505)+);+#653 = CARTESIAN_POINT('',(5.261090838752,4.971090302081,3.447722557505)+);+#654 = CARTESIAN_POINT('',(7.469576757507,2.260332741408,3.447722557505)+);+#655 = CARTESIAN_POINT('',(7.46957675755,-2.260332741457,3.447722557505)+);+#656 = CARTESIAN_POINT('',(5.261090838755,-4.971090301995,3.447722557505+));+#657 = CARTESIAN_POINT('',(2.249772170768,-6.828057715791,3.447722557505+));+#658 = CARTESIAN_POINT('',(-1.236030571613,-6.560480641736,+3.447722557505));+#659 = CARTESIAN_POINT('',(-3.76908378461,-4.818226231748,3.447722557505+));+#660 = CARTESIAN_POINT('',(-4.999999999998,-2.381651773527,+3.447722557505));+#661 = CARTESIAN_POINT('',(-5.,-6.123233995737E-16,3.447722557505));+#662 = ORIENTED_EDGE('',*,*,#638,.F.);+#663 = ORIENTED_EDGE('',*,*,#253,.F.);+#664 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,(+(#665,#666,#667,#668,#669,#670,#671,#672,#673,#674,#675,#676,#677+,#678)+,(#679,#680,#681,#682,#683,#684,#685,#686,#687,#688,#689,#690,#691+,#692)+,(#693,#694,#695,#696,#697,#698,#699,#700,#701,#702,#703,#704,#705+,#706+)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(14,+14),(0.,31.415926535898),(6.213111017846E-16,31.415926535898),+.PIECEWISE_BEZIER_KNOTS.) GEOMETRIC_REPRESENTATION_ITEM()+RATIONAL_B_SPLINE_SURFACE((+(1.,1.,1.000000000001,0.999999999997,1.000000000006,0.99999999999+,1.000000000011,0.99999999999,1.000000000008,0.999999999995+,1.000000000002,0.999999999999,1.,1.)+,(0.738548945876,0.738548945876,0.738548945877,0.738548945873+,0.738548945882,0.738548945867,0.738548945886,0.738548945867+,0.738548945883,0.738548945872,0.738548945878,0.738548945875+,0.738548945876,0.738548945876)+,(1.,1.,1.000000000001,0.999999999997,1.000000000006,0.99999999999+,1.000000000011,0.99999999999,1.000000000008,0.999999999995+,1.000000000002,0.999999999999,1.,1.+))) REPRESENTATION_ITEM('') SURFACE() );+#665 = CARTESIAN_POINT('',(-4.954545454545,6.067568232139E-16,+3.397929597732));+#666 = CARTESIAN_POINT('',(-4.954545454548,2.360000393769,3.397929597732+));+#667 = CARTESIAN_POINT('',(-3.73481938655,4.774424175087,3.397929597732)+);+#668 = CARTESIAN_POINT('',(-1.22479393009,6.500839908663,3.397929597732)+);+#669 = CARTESIAN_POINT('',(2.229319696526,6.765984463757,3.397929597732)+);+#670 = CARTESIAN_POINT('',(5.213262740214,4.925898572058,3.397929597732)+);+#671 = CARTESIAN_POINT('',(7.401671514262,2.239784261947,3.397929597732)+);+#672 = CARTESIAN_POINT('',(7.401671514295,-2.239784261995,3.397929597732+));+#673 = CARTESIAN_POINT('',(5.213262740226,-4.925898571972,3.397929597732+));+#674 = CARTESIAN_POINT('',(2.229319696486,-6.765984463832,3.397929597732+));+#675 = CARTESIAN_POINT('',(-1.224793930051,-6.500839908627,+3.397929597732));+#676 = CARTESIAN_POINT('',(-3.734819386569,-4.774424175097,+3.397929597732));+#677 = CARTESIAN_POINT('',(-4.954545454544,-2.360000393768,+3.397929597732));+#678 = CARTESIAN_POINT('',(-4.954545454545,-6.067568232139E-16,+3.397929597732));+#679 = CARTESIAN_POINT('',(-5.,5.569295732177E-15,3.402079011046));+#680 = CARTESIAN_POINT('',(-5.000000000003,2.381651773529,3.402079011046+));+#681 = CARTESIAN_POINT('',(-3.769083784593,4.818226231737,3.402079011046+));+#682 = CARTESIAN_POINT('',(-1.236030571645,6.560480641778,3.402079011046+));+#683 = CARTESIAN_POINT('',(2.249772170791,6.828057715703,3.402079011046)+);+#684 = CARTESIAN_POINT('',(5.261090838776,4.971090302096,3.402079011046)+);+#685 = CARTESIAN_POINT('',(7.469576757472,2.260332741396,3.402079011046)+);+#686 = CARTESIAN_POINT('',(7.469576757586,-2.260332741457,3.402079011046+));+#687 = CARTESIAN_POINT('',(5.26109083873,-4.971090301989,3.402079011046)+);+#688 = CARTESIAN_POINT('',(2.24977217078,-6.828057715798,3.402079011046)+);+#689 = CARTESIAN_POINT('',(-1.236030571616,-6.560480641732,+3.402079011046));+#690 = CARTESIAN_POINT('',(-3.76908378461,-4.818226231749,3.402079011046+));+#691 = CARTESIAN_POINT('',(-4.999999999998,-2.381651773527,+3.402079011046));+#692 = CARTESIAN_POINT('',(-5.,3.506709519241E-15,3.402079011046));+#693 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,3.447722557505));+#694 = CARTESIAN_POINT('',(-5.000000000003,2.381651773528,3.447722557505+));+#695 = CARTESIAN_POINT('',(-3.769083784592,4.818226231739,3.447722557505+));+#696 = CARTESIAN_POINT('',(-1.236030571649,6.560480641771,3.447722557505+));+#697 = CARTESIAN_POINT('',(2.249772170804,6.828057715716,3.447722557505)+);+#698 = CARTESIAN_POINT('',(5.261090838752,4.971090302081,3.447722557505)+);+#699 = CARTESIAN_POINT('',(7.469576757507,2.260332741408,3.447722557505)+);+#700 = CARTESIAN_POINT('',(7.46957675755,-2.260332741457,3.447722557505)+);+#701 = CARTESIAN_POINT('',(5.261090838755,-4.971090301995,3.447722557505+));+#702 = CARTESIAN_POINT('',(2.249772170768,-6.828057715791,3.447722557505+));+#703 = CARTESIAN_POINT('',(-1.236030571613,-6.560480641736,+3.447722557505));+#704 = CARTESIAN_POINT('',(-3.76908378461,-4.818226231748,3.447722557505+));+#705 = CARTESIAN_POINT('',(-4.999999999998,-2.381651773527,+3.447722557505));+#706 = CARTESIAN_POINT('',(-5.,-6.123233995737E-16,3.447722557505));+#707 = ADVANCED_FACE('',(#708),#788,.F.);+#708 = FACE_BOUND('',#709,.F.);+#709 = EDGE_LOOP('',(#710,#717,#718,#726,#735,#741,#742,#749,#750,#756,+#757,#765,#774,#780,#781,#787));+#710 = ORIENTED_EDGE('',*,*,#711,.F.);+#711 = EDGE_CURVE('',#574,#468,#712,.T.);+#712 = CIRCLE('',#713,0.4);+#713 = AXIS2_PLACEMENT_3D('',#714,#715,#716);+#714 = CARTESIAN_POINT('',(4.75,-4.75,0.15));+#715 = DIRECTION('',(0.,0.,-1.));+#716 = DIRECTION('',(1.224646799147E-16,1.,0.));+#717 = ORIENTED_EDGE('',*,*,#573,.T.);+#718 = ORIENTED_EDGE('',*,*,#719,.F.);+#719 = EDGE_CURVE('',#720,#576,#722,.T.);+#720 = VERTEX_POINT('',#721);+#721 = CARTESIAN_POINT('',(2.75,-0.45,0.15));+#722 = LINE('',#723,#724);+#723 = CARTESIAN_POINT('',(2.75,-0.45,0.15));+#724 = VECTOR('',#725,1.);+#725 = DIRECTION('',(1.,-2.449293598295E-16,0.));+#726 = ORIENTED_EDGE('',*,*,#727,.F.);+#727 = EDGE_CURVE('',#728,#720,#730,.T.);+#728 = VERTEX_POINT('',#729);+#729 = CARTESIAN_POINT('',(2.75,0.45,0.15));+#730 = CIRCLE('',#731,0.45);+#731 = AXIS2_PLACEMENT_3D('',#732,#733,#734);+#732 = CARTESIAN_POINT('',(2.75,-6.73555739531E-16,0.15));+#733 = DIRECTION('',(0.,-0.,1.));+#734 = DIRECTION('',(2.449293598295E-16,1.,0.));+#735 = ORIENTED_EDGE('',*,*,#736,.F.);+#736 = EDGE_CURVE('',#617,#728,#737,.T.);+#737 = LINE('',#738,#739);+#738 = CARTESIAN_POINT('',(6.,0.45,0.15));+#739 = VECTOR('',#740,1.);+#740 = DIRECTION('',(-1.,2.449293598295E-16,0.));+#741 = ORIENTED_EDGE('',*,*,#616,.T.);+#742 = ORIENTED_EDGE('',*,*,#743,.F.);+#743 = EDGE_CURVE('',#412,#609,#744,.T.);+#744 = CIRCLE('',#745,0.4);+#745 = AXIS2_PLACEMENT_3D('',#746,#747,#748);+#746 = CARTESIAN_POINT('',(4.75,4.75,0.15));+#747 = DIRECTION('',(0.,0.,-1.));+#748 = DIRECTION('',(1.224646799147E-16,1.,0.));+#749 = ORIENTED_EDGE('',*,*,#411,.T.);+#750 = ORIENTED_EDGE('',*,*,#751,.T.);+#751 = EDGE_CURVE('',#414,#283,#752,.T.);+#752 = LINE('',#753,#754);+#753 = CARTESIAN_POINT('',(-4.15,5.15,0.15));+#754 = VECTOR('',#755,1.);+#755 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#756 = ORIENTED_EDGE('',*,*,#282,.T.);+#757 = ORIENTED_EDGE('',*,*,#758,.F.);+#758 = EDGE_CURVE('',#759,#285,#761,.T.);+#759 = VERTEX_POINT('',#760);+#760 = CARTESIAN_POINT('',(-2.75,0.45,0.15));+#761 = LINE('',#762,#763);+#762 = CARTESIAN_POINT('',(-2.75,0.45,0.15));+#763 = VECTOR('',#764,1.);+#764 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#765 = ORIENTED_EDGE('',*,*,#766,.F.);+#766 = EDGE_CURVE('',#767,#759,#769,.T.);+#767 = VERTEX_POINT('',#768);+#768 = CARTESIAN_POINT('',(-2.75,-0.45,0.15));+#769 = CIRCLE('',#770,0.45);+#770 = AXIS2_PLACEMENT_3D('',#771,#772,#773);+#771 = CARTESIAN_POINT('',(-2.75,3.367778697655E-16,0.15));+#772 = DIRECTION('',(0.,0.,1.));+#773 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#774 = ORIENTED_EDGE('',*,*,#775,.F.);+#775 = EDGE_CURVE('',#340,#767,#776,.T.);+#776 = LINE('',#777,#778);+#777 = CARTESIAN_POINT('',(-6.,-0.45,0.15));+#778 = VECTOR('',#779,1.);+#779 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#780 = ORIENTED_EDGE('',*,*,#339,.T.);+#781 = ORIENTED_EDGE('',*,*,#782,.T.);+#782 = EDGE_CURVE('',#332,#478,#783,.T.);+#783 = LINE('',#784,#785);+#784 = CARTESIAN_POINT('',(-5.15,-4.15,0.15));+#785 = VECTOR('',#786,1.);+#786 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#787 = ORIENTED_EDGE('',*,*,#477,.T.);+#788 = PLANE('',#789);+#789 = AXIS2_PLACEMENT_3D('',#790,#791,#792);+#790 = CARTESIAN_POINT('',(0.161080870099,-1.972671719701E-17,0.15));+#791 = DIRECTION('',(0.,0.,1.));+#792 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#793 = ADVANCED_FACE('',(#794),#805,.F.);+#794 = FACE_BOUND('',#795,.F.);+#795 = EDGE_LOOP('',(#796,#797,#798,#804));+#796 = ORIENTED_EDGE('',*,*,#751,.F.);+#797 = ORIENTED_EDGE('',*,*,#453,.T.);+#798 = ORIENTED_EDGE('',*,*,#799,.T.);+#799 = EDGE_CURVE('',#446,#293,#800,.T.);+#800 = LINE('',#801,#802);+#801 = CARTESIAN_POINT('',(-3.1125,6.1875,0.85));+#802 = VECTOR('',#803,1.);+#803 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#804 = ORIENTED_EDGE('',*,*,#292,.F.);+#805 = PLANE('',#806);+#806 = AXIS2_PLACEMENT_3D('',#807,#808,#809);+#807 = CARTESIAN_POINT('',(-4.15,5.15,0.15));+#808 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#809 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#810 = ADVANCED_FACE('',(#811),#836,.T.);+#811 = FACE_BOUND('',#812,.T.);+#812 = EDGE_LOOP('',(#813,#821,#829,#835));+#813 = ORIENTED_EDGE('',*,*,#814,.T.);+#814 = EDGE_CURVE('',#285,#815,#817,.T.);+#815 = VERTEX_POINT('',#816);+#816 = CARTESIAN_POINT('',(-6.,0.45,0.15));+#817 = LINE('',#818,#819);+#818 = CARTESIAN_POINT('',(-2.75,0.45,0.15));+#819 = VECTOR('',#820,1.);+#820 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#821 = ORIENTED_EDGE('',*,*,#822,.T.);+#822 = EDGE_CURVE('',#815,#823,#825,.T.);+#823 = VERTEX_POINT('',#824);+#824 = CARTESIAN_POINT('',(-6.,-0.45,0.15));+#825 = LINE('',#826,#827);+#826 = CARTESIAN_POINT('',(-6.,0.45,0.15));+#827 = VECTOR('',#828,1.);+#828 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#829 = ORIENTED_EDGE('',*,*,#830,.T.);+#830 = EDGE_CURVE('',#823,#340,#831,.T.);+#831 = LINE('',#832,#833);+#832 = CARTESIAN_POINT('',(-6.,-0.45,0.15));+#833 = VECTOR('',#834,1.);+#834 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#835 = ORIENTED_EDGE('',*,*,#347,.F.);+#836 = PLANE('',#837);+#837 = AXIS2_PLACEMENT_3D('',#838,#839,#840);+#838 = CARTESIAN_POINT('',(-4.251343967025,5.206394781291E-16,0.15));+#839 = DIRECTION('',(0.,0.,1.));+#840 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#841 = ADVANCED_FACE('',(#842),#848,.T.);+#842 = FACE_BOUND('',#843,.T.);+#843 = EDGE_LOOP('',(#844,#845,#846,#847));+#844 = ORIENTED_EDGE('',*,*,#361,.T.);+#845 = ORIENTED_EDGE('',*,*,#445,.T.);+#846 = ORIENTED_EDGE('',*,*,#799,.T.);+#847 = ORIENTED_EDGE('',*,*,#300,.T.);+#848 = PLANE('',#849);+#849 = AXIS2_PLACEMENT_3D('',#850,#851,#852);+#850 = CARTESIAN_POINT('',(6.306931015609E-16,5.15,0.85));+#851 = DIRECTION('',(0.,0.,1.));+#852 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#853 = ADVANCED_FACE('',(#854),#865,.F.);+#854 = FACE_BOUND('',#855,.F.);+#855 = EDGE_LOOP('',(#856,#857,#858,#864));+#856 = ORIENTED_EDGE('',*,*,#782,.F.);+#857 = ORIENTED_EDGE('',*,*,#331,.T.);+#858 = ORIENTED_EDGE('',*,*,#859,.T.);+#859 = EDGE_CURVE('',#324,#486,#860,.T.);+#860 = LINE('',#861,#862);+#861 = CARTESIAN_POINT('',(-6.1875,-3.1125,0.85));+#862 = VECTOR('',#863,1.);+#863 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#864 = ORIENTED_EDGE('',*,*,#485,.F.);+#865 = PLANE('',#866);+#866 = AXIS2_PLACEMENT_3D('',#867,#868,#869);+#867 = CARTESIAN_POINT('',(-5.15,-4.15,0.15));+#868 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#869 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#870 = ADVANCED_FACE('',(#871),#877,.T.);+#871 = FACE_BOUND('',#872,.T.);+#872 = EDGE_LOOP('',(#873,#874,#875,#876));+#873 = ORIENTED_EDGE('',*,*,#493,.F.);+#874 = ORIENTED_EDGE('',*,*,#388,.T.);+#875 = ORIENTED_EDGE('',*,*,#323,.T.);+#876 = ORIENTED_EDGE('',*,*,#859,.T.);+#877 = PLANE('',#878);+#878 = AXIS2_PLACEMENT_3D('',#879,#880,#881);+#879 = CARTESIAN_POINT('',(6.306931015609E-16,5.15,0.85));+#880 = DIRECTION('',(0.,0.,1.));+#881 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#882 = ADVANCED_FACE('',(#883),#895,.T.);+#883 = FACE_BOUND('',#884,.T.);+#884 = EDGE_LOOP('',(#885,#886,#887,#894));+#885 = ORIENTED_EDGE('',*,*,#533,.F.);+#886 = ORIENTED_EDGE('',*,*,#600,.T.);+#887 = ORIENTED_EDGE('',*,*,#888,.F.);+#888 = EDGE_CURVE('',#422,#601,#889,.T.);+#889 = CIRCLE('',#890,0.4);+#890 = AXIS2_PLACEMENT_3D('',#891,#892,#893);+#891 = CARTESIAN_POINT('',(4.75,4.75,1.15));+#892 = DIRECTION('',(0.,0.,-1.));+#893 = DIRECTION('',(1.224646799147E-16,1.,0.));+#894 = ORIENTED_EDGE('',*,*,#429,.T.);+#895 = PLANE('',#896);+#896 = AXIS2_PLACEMENT_3D('',#897,#898,#899);+#897 = CARTESIAN_POINT('',(0.161080870099,-1.972671719701E-17,1.15));+#898 = DIRECTION('',(0.,0.,1.));+#899 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#900 = ADVANCED_FACE('',(#901),#907,.T.);+#901 = FACE_BOUND('',#902,.F.);+#902 = EDGE_LOOP('',(#903,#904,#905,#906));+#903 = ORIENTED_EDGE('',*,*,#743,.T.);+#904 = ORIENTED_EDGE('',*,*,#608,.T.);+#905 = ORIENTED_EDGE('',*,*,#888,.F.);+#906 = ORIENTED_EDGE('',*,*,#421,.F.);+#907 = CYLINDRICAL_SURFACE('',#908,0.4);+#908 = AXIS2_PLACEMENT_3D('',#909,#910,#911);+#909 = CARTESIAN_POINT('',(4.75,4.75,0.15));+#910 = DIRECTION('',(0.,0.,1.));+#911 = DIRECTION('',(1.224646799147E-16,1.,0.));+#912 = ADVANCED_FACE('',(#913),#925,.T.);+#913 = FACE_BOUND('',#914,.F.);+#914 = EDGE_LOOP('',(#915,#916,#917,#924));+#915 = ORIENTED_EDGE('',*,*,#711,.T.);+#916 = ORIENTED_EDGE('',*,*,#467,.T.);+#917 = ORIENTED_EDGE('',*,*,#918,.F.);+#918 = EDGE_CURVE('',#584,#470,#919,.T.);+#919 = CIRCLE('',#920,0.4);+#920 = AXIS2_PLACEMENT_3D('',#921,#922,#923);+#921 = CARTESIAN_POINT('',(4.75,-4.75,1.15));+#922 = DIRECTION('',(0.,0.,-1.));+#923 = DIRECTION('',(1.224646799147E-16,1.,0.));+#924 = ORIENTED_EDGE('',*,*,#583,.F.);+#925 = CYLINDRICAL_SURFACE('',#926,0.4);+#926 = AXIS2_PLACEMENT_3D('',#927,#928,#929);+#927 = CARTESIAN_POINT('',(4.75,-4.75,0.15));+#928 = DIRECTION('',(0.,0.,1.));+#929 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#930 = ADVANCED_FACE('',(#931),#937,.T.);+#931 = FACE_BOUND('',#932,.T.);+#932 = EDGE_LOOP('',(#933,#934,#935,#936));+#933 = ORIENTED_EDGE('',*,*,#918,.F.);+#934 = ORIENTED_EDGE('',*,*,#591,.T.);+#935 = ORIENTED_EDGE('',*,*,#550,.F.);+#936 = ORIENTED_EDGE('',*,*,#509,.T.);+#937 = PLANE('',#938);+#938 = AXIS2_PLACEMENT_3D('',#939,#940,#941);+#939 = CARTESIAN_POINT('',(0.161080870099,-1.972671719701E-17,1.15));+#940 = DIRECTION('',(0.,0.,1.));+#941 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#942 = ADVANCED_FACE('',(#943),#968,.T.);+#943 = FACE_BOUND('',#944,.T.);+#944 = EDGE_LOOP('',(#945,#953,#961,#967));+#945 = ORIENTED_EDGE('',*,*,#946,.T.);+#946 = EDGE_CURVE('',#576,#947,#949,.T.);+#947 = VERTEX_POINT('',#948);+#948 = CARTESIAN_POINT('',(6.,-0.45,0.15));+#949 = LINE('',#950,#951);+#950 = CARTESIAN_POINT('',(2.75,-0.45,0.15));+#951 = VECTOR('',#952,1.);+#952 = DIRECTION('',(1.,-2.449293598295E-16,0.));+#953 = ORIENTED_EDGE('',*,*,#954,.T.);+#954 = EDGE_CURVE('',#947,#955,#957,.T.);+#955 = VERTEX_POINT('',#956);+#956 = CARTESIAN_POINT('',(6.,0.45,0.15));+#957 = LINE('',#958,#959);+#958 = CARTESIAN_POINT('',(6.,-0.45,0.15));+#959 = VECTOR('',#960,1.);+#960 = DIRECTION('',(2.449293598295E-16,1.,0.));+#961 = ORIENTED_EDGE('',*,*,#962,.T.);+#962 = EDGE_CURVE('',#955,#617,#963,.T.);+#963 = LINE('',#964,#965);+#964 = CARTESIAN_POINT('',(6.,0.45,0.15));+#965 = VECTOR('',#966,1.);+#966 = DIRECTION('',(-1.,2.449293598295E-16,0.));+#967 = ORIENTED_EDGE('',*,*,#624,.F.);+#968 = PLANE('',#969);+#969 = AXIS2_PLACEMENT_3D('',#970,#971,#972);+#970 = CARTESIAN_POINT('',(4.251343967025,-1.041278956258E-15,0.15));+#971 = DIRECTION('',(0.,0.,1.));+#972 = DIRECTION('',(1.,-2.449293598295E-16,0.));+#973 = ADVANCED_FACE('',(#974),#1020,.T.);+#974 = FACE_BOUND('',#975,.F.);+#975 = EDGE_LOOP('',(#976,#984,#993,#1002,#1011,#1018,#1019));+#976 = ORIENTED_EDGE('',*,*,#977,.T.);+#977 = EDGE_CURVE('',#639,#978,#980,.T.);+#978 = VERTEX_POINT('',#979);+#979 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,9.833333333333));+#980 = LINE('',#981,#982);+#981 = CARTESIAN_POINT('',(-5.,6.123233995737E-16,3.4));+#982 = VECTOR('',#983,1.);+#983 = DIRECTION('',(0.,0.,1.));+#984 = ORIENTED_EDGE('',*,*,#985,.F.);+#985 = EDGE_CURVE('',#986,#978,#988,.T.);+#986 = VERTEX_POINT('',#987);+#987 = CARTESIAN_POINT('',(1.5,-4.769696007085,9.833333333333));+#988 = CIRCLE('',#989,5.);+#989 = AXIS2_PLACEMENT_3D('',#990,#991,#992);+#990 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#991 = DIRECTION('',(0.,0.,-1.));+#992 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#993 = ORIENTED_EDGE('',*,*,#994,.F.);+#994 = EDGE_CURVE('',#995,#986,#997,.T.);+#995 = VERTEX_POINT('',#996);+#996 = CARTESIAN_POINT('',(5.,2.136328954389E-15,9.833333333333));+#997 = CIRCLE('',#998,5.);+#998 = AXIS2_PLACEMENT_3D('',#999,#1000,#1001);+#999 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#1000 = DIRECTION('',(0.,0.,-1.));+#1001 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1002 = ORIENTED_EDGE('',*,*,#1003,.F.);+#1003 = EDGE_CURVE('',#1004,#995,#1006,.T.);+#1004 = VERTEX_POINT('',#1005);+#1005 = CARTESIAN_POINT('',(1.5,4.769696007085,9.833333333333));+#1006 = CIRCLE('',#1007,5.);+#1007 = AXIS2_PLACEMENT_3D('',#1008,#1009,#1010);+#1008 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#1009 = DIRECTION('',(0.,0.,-1.));+#1010 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1011 = ORIENTED_EDGE('',*,*,#1012,.F.);+#1012 = EDGE_CURVE('',#978,#1004,#1013,.T.);+#1013 = CIRCLE('',#1014,5.);+#1014 = AXIS2_PLACEMENT_3D('',#1015,#1016,#1017);+#1015 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#1016 = DIRECTION('',(0.,0.,-1.));+#1017 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1018 = ORIENTED_EDGE('',*,*,#977,.F.);+#1019 = ORIENTED_EDGE('',*,*,#646,.T.);+#1020 = CYLINDRICAL_SURFACE('',#1021,5.);+#1021 = AXIS2_PLACEMENT_3D('',#1022,#1023,#1024);+#1022 = CARTESIAN_POINT('',(0.,0.,3.4));+#1023 = DIRECTION('',(0.,0.,1.));+#1024 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1025 = ADVANCED_FACE('',(#1026),#1052,.F.);+#1026 = FACE_BOUND('',#1027,.F.);+#1027 = EDGE_LOOP('',(#1028,#1036,#1037,#1038,#1046));+#1028 = ORIENTED_EDGE('',*,*,#1029,.T.);+#1029 = EDGE_CURVE('',#1030,#823,#1032,.T.);+#1030 = VERTEX_POINT('',#1031);+#1031 = CARTESIAN_POINT('',(-6.,-0.45,0.));+#1032 = LINE('',#1033,#1034);+#1033 = CARTESIAN_POINT('',(-6.,-0.45,0.));+#1034 = VECTOR('',#1035,1.);+#1035 = DIRECTION('',(0.,0.,1.));+#1036 = ORIENTED_EDGE('',*,*,#830,.T.);+#1037 = ORIENTED_EDGE('',*,*,#775,.T.);+#1038 = ORIENTED_EDGE('',*,*,#1039,.F.);+#1039 = EDGE_CURVE('',#1040,#767,#1042,.T.);+#1040 = VERTEX_POINT('',#1041);+#1041 = CARTESIAN_POINT('',(-2.75,-0.45,0.));+#1042 = LINE('',#1043,#1044);+#1043 = CARTESIAN_POINT('',(-2.75,-0.45,0.));+#1044 = VECTOR('',#1045,1.);+#1045 = DIRECTION('',(0.,0.,1.));+#1046 = ORIENTED_EDGE('',*,*,#1047,.F.);+#1047 = EDGE_CURVE('',#1030,#1040,#1048,.T.);+#1048 = LINE('',#1049,#1050);+#1049 = CARTESIAN_POINT('',(-6.,-0.45,0.));+#1050 = VECTOR('',#1051,1.);+#1051 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#1052 = PLANE('',#1053);+#1053 = AXIS2_PLACEMENT_3D('',#1054,#1055,#1056);+#1054 = CARTESIAN_POINT('',(-6.,-0.45,0.));+#1055 = DIRECTION('',(1.224646799147E-16,1.,0.));+#1056 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#1057 = ADVANCED_FACE('',(#1058),#1077,.T.);+#1058 = FACE_BOUND('',#1059,.F.);+#1059 = EDGE_LOOP('',(#1060,#1061,#1062,#1070));+#1060 = ORIENTED_EDGE('',*,*,#1039,.T.);+#1061 = ORIENTED_EDGE('',*,*,#766,.T.);+#1062 = ORIENTED_EDGE('',*,*,#1063,.F.);+#1063 = EDGE_CURVE('',#1064,#759,#1066,.T.);+#1064 = VERTEX_POINT('',#1065);+#1065 = CARTESIAN_POINT('',(-2.75,0.45,0.));+#1066 = LINE('',#1067,#1068);+#1067 = CARTESIAN_POINT('',(-2.75,0.45,0.));+#1068 = VECTOR('',#1069,1.);+#1069 = DIRECTION('',(0.,0.,1.));+#1070 = ORIENTED_EDGE('',*,*,#1071,.F.);+#1071 = EDGE_CURVE('',#1040,#1064,#1072,.T.);+#1072 = CIRCLE('',#1073,0.45);+#1073 = AXIS2_PLACEMENT_3D('',#1074,#1075,#1076);+#1074 = CARTESIAN_POINT('',(-2.75,3.367778697655E-16,0.));+#1075 = DIRECTION('',(0.,0.,1.));+#1076 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#1077 = CYLINDRICAL_SURFACE('',#1078,0.45);+#1078 = AXIS2_PLACEMENT_3D('',#1079,#1080,#1081);+#1079 = CARTESIAN_POINT('',(-2.75,3.367778697655E-16,0.));+#1080 = DIRECTION('',(0.,-0.,-1.));+#1081 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#1082 = ADVANCED_FACE('',(#1083),#1102,.F.);+#1083 = FACE_BOUND('',#1084,.F.);+#1084 = EDGE_LOOP('',(#1085,#1086,#1087,#1088,#1096));+#1085 = ORIENTED_EDGE('',*,*,#1063,.T.);+#1086 = ORIENTED_EDGE('',*,*,#758,.T.);+#1087 = ORIENTED_EDGE('',*,*,#814,.T.);+#1088 = ORIENTED_EDGE('',*,*,#1089,.F.);+#1089 = EDGE_CURVE('',#1090,#815,#1092,.T.);+#1090 = VERTEX_POINT('',#1091);+#1091 = CARTESIAN_POINT('',(-6.,0.45,0.));+#1092 = LINE('',#1093,#1094);+#1093 = CARTESIAN_POINT('',(-6.,0.45,0.));+#1094 = VECTOR('',#1095,1.);+#1095 = DIRECTION('',(0.,0.,1.));+#1096 = ORIENTED_EDGE('',*,*,#1097,.F.);+#1097 = EDGE_CURVE('',#1064,#1090,#1098,.T.);+#1098 = LINE('',#1099,#1100);+#1099 = CARTESIAN_POINT('',(-2.75,0.45,0.));+#1100 = VECTOR('',#1101,1.);+#1101 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1102 = PLANE('',#1103);+#1103 = AXIS2_PLACEMENT_3D('',#1104,#1105,#1106);+#1104 = CARTESIAN_POINT('',(-2.75,0.45,0.));+#1105 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#1106 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1107 = ADVANCED_FACE('',(#1108),#1134,.F.);+#1108 = FACE_BOUND('',#1109,.F.);+#1109 = EDGE_LOOP('',(#1110,#1118,#1119,#1120,#1128));+#1110 = ORIENTED_EDGE('',*,*,#1111,.T.);+#1111 = EDGE_CURVE('',#1112,#955,#1114,.T.);+#1112 = VERTEX_POINT('',#1113);+#1113 = CARTESIAN_POINT('',(6.,0.45,0.));+#1114 = LINE('',#1115,#1116);+#1115 = CARTESIAN_POINT('',(6.,0.45,0.));+#1116 = VECTOR('',#1117,1.);+#1117 = DIRECTION('',(0.,0.,1.));+#1118 = ORIENTED_EDGE('',*,*,#962,.T.);+#1119 = ORIENTED_EDGE('',*,*,#736,.T.);+#1120 = ORIENTED_EDGE('',*,*,#1121,.F.);+#1121 = EDGE_CURVE('',#1122,#728,#1124,.T.);+#1122 = VERTEX_POINT('',#1123);+#1123 = CARTESIAN_POINT('',(2.75,0.45,0.));+#1124 = LINE('',#1125,#1126);+#1125 = CARTESIAN_POINT('',(2.75,0.45,0.));+#1126 = VECTOR('',#1127,1.);+#1127 = DIRECTION('',(0.,0.,1.));+#1128 = ORIENTED_EDGE('',*,*,#1129,.F.);+#1129 = EDGE_CURVE('',#1112,#1122,#1130,.T.);+#1130 = LINE('',#1131,#1132);+#1131 = CARTESIAN_POINT('',(6.,0.45,0.));+#1132 = VECTOR('',#1133,1.);+#1133 = DIRECTION('',(-1.,2.449293598295E-16,0.));+#1134 = PLANE('',#1135);+#1135 = AXIS2_PLACEMENT_3D('',#1136,#1137,#1138);+#1136 = CARTESIAN_POINT('',(6.,0.45,0.));+#1137 = DIRECTION('',(-2.449293598295E-16,-1.,0.));+#1138 = DIRECTION('',(-1.,2.449293598295E-16,0.));+#1139 = ADVANCED_FACE('',(#1140),#1159,.T.);+#1140 = FACE_BOUND('',#1141,.F.);+#1141 = EDGE_LOOP('',(#1142,#1143,#1144,#1152));+#1142 = ORIENTED_EDGE('',*,*,#1121,.T.);+#1143 = ORIENTED_EDGE('',*,*,#727,.T.);+#1144 = ORIENTED_EDGE('',*,*,#1145,.F.);+#1145 = EDGE_CURVE('',#1146,#720,#1148,.T.);+#1146 = VERTEX_POINT('',#1147);+#1147 = CARTESIAN_POINT('',(2.75,-0.45,0.));+#1148 = LINE('',#1149,#1150);+#1149 = CARTESIAN_POINT('',(2.75,-0.45,0.));+#1150 = VECTOR('',#1151,1.);+#1151 = DIRECTION('',(0.,0.,1.));+#1152 = ORIENTED_EDGE('',*,*,#1153,.F.);+#1153 = EDGE_CURVE('',#1122,#1146,#1154,.T.);+#1154 = CIRCLE('',#1155,0.45);+#1155 = AXIS2_PLACEMENT_3D('',#1156,#1157,#1158);+#1156 = CARTESIAN_POINT('',(2.75,-6.73555739531E-16,0.));+#1157 = DIRECTION('',(0.,-0.,1.));+#1158 = DIRECTION('',(2.449293598295E-16,1.,0.));+#1159 = CYLINDRICAL_SURFACE('',#1160,0.45);+#1160 = AXIS2_PLACEMENT_3D('',#1161,#1162,#1163);+#1161 = CARTESIAN_POINT('',(2.75,-6.73555739531E-16,0.));+#1162 = DIRECTION('',(0.,0.,-1.));+#1163 = DIRECTION('',(2.449293598295E-16,1.,0.));+#1164 = ADVANCED_FACE('',(#1165),#1184,.F.);+#1165 = FACE_BOUND('',#1166,.F.);+#1166 = EDGE_LOOP('',(#1167,#1168,#1169,#1170,#1178));+#1167 = ORIENTED_EDGE('',*,*,#1145,.T.);+#1168 = ORIENTED_EDGE('',*,*,#719,.T.);+#1169 = ORIENTED_EDGE('',*,*,#946,.T.);+#1170 = ORIENTED_EDGE('',*,*,#1171,.F.);+#1171 = EDGE_CURVE('',#1172,#947,#1174,.T.);+#1172 = VERTEX_POINT('',#1173);+#1173 = CARTESIAN_POINT('',(6.,-0.45,0.));+#1174 = LINE('',#1175,#1176);+#1175 = CARTESIAN_POINT('',(6.,-0.45,0.));+#1176 = VECTOR('',#1177,1.);+#1177 = DIRECTION('',(0.,0.,1.));+#1178 = ORIENTED_EDGE('',*,*,#1179,.F.);+#1179 = EDGE_CURVE('',#1146,#1172,#1180,.T.);+#1180 = LINE('',#1181,#1182);+#1181 = CARTESIAN_POINT('',(2.75,-0.45,0.));+#1182 = VECTOR('',#1183,1.);+#1183 = DIRECTION('',(1.,-2.449293598295E-16,0.));+#1184 = PLANE('',#1185);+#1185 = AXIS2_PLACEMENT_3D('',#1186,#1187,#1188);+#1186 = CARTESIAN_POINT('',(2.75,-0.45,0.));+#1187 = DIRECTION('',(2.449293598295E-16,1.,0.));+#1188 = DIRECTION('',(1.,-2.449293598295E-16,0.));+#1189 = ADVANCED_FACE('',(#1190),#1201,.F.);+#1190 = FACE_BOUND('',#1191,.F.);+#1191 = EDGE_LOOP('',(#1192,#1193,#1194,#1195));+#1192 = ORIENTED_EDGE('',*,*,#1089,.T.);+#1193 = ORIENTED_EDGE('',*,*,#822,.T.);+#1194 = ORIENTED_EDGE('',*,*,#1029,.F.);+#1195 = ORIENTED_EDGE('',*,*,#1196,.F.);+#1196 = EDGE_CURVE('',#1090,#1030,#1197,.T.);+#1197 = LINE('',#1198,#1199);+#1198 = CARTESIAN_POINT('',(-6.,0.45,0.));+#1199 = VECTOR('',#1200,1.);+#1200 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#1201 = PLANE('',#1202);+#1202 = AXIS2_PLACEMENT_3D('',#1203,#1204,#1205);+#1203 = CARTESIAN_POINT('',(-6.,0.45,0.));+#1204 = DIRECTION('',(1.,-1.224646799147E-16,0.));+#1205 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#1206 = ADVANCED_FACE('',(#1207),#1218,.F.);+#1207 = FACE_BOUND('',#1208,.F.);+#1208 = EDGE_LOOP('',(#1209,#1210,#1211,#1212));+#1209 = ORIENTED_EDGE('',*,*,#1171,.T.);+#1210 = ORIENTED_EDGE('',*,*,#954,.T.);+#1211 = ORIENTED_EDGE('',*,*,#1111,.F.);+#1212 = ORIENTED_EDGE('',*,*,#1213,.F.);+#1213 = EDGE_CURVE('',#1172,#1112,#1214,.T.);+#1214 = LINE('',#1215,#1216);+#1215 = CARTESIAN_POINT('',(6.,-0.45,0.));+#1216 = VECTOR('',#1217,1.);+#1217 = DIRECTION('',(2.449293598295E-16,1.,0.));+#1218 = PLANE('',#1219);+#1219 = AXIS2_PLACEMENT_3D('',#1220,#1221,#1222);+#1220 = CARTESIAN_POINT('',(6.,-0.45,0.));+#1221 = DIRECTION('',(-1.,2.449293598295E-16,0.));+#1222 = DIRECTION('',(2.449293598295E-16,1.,0.));+#1223 = ADVANCED_FACE('',(#1224),#1265,.T.);+#1224 = FACE_BOUND('',#1225,.F.);+#1225 = EDGE_LOOP('',(#1226,#1235,#1236,#1258));+#1226 = ORIENTED_EDGE('',*,*,#1227,.F.);+#1227 = EDGE_CURVE('',#978,#1228,#1230,.T.);+#1228 = VERTEX_POINT('',#1229);+#1229 = CARTESIAN_POINT('',(-4.333333333333,5.306802796305E-16,10.5));+#1230 = CIRCLE('',#1231,0.666666666667);+#1231 = AXIS2_PLACEMENT_3D('',#1232,#1233,#1234);+#1232 = CARTESIAN_POINT('',(-4.333333333333,5.306802796305E-16,+9.833333333333));+#1233 = DIRECTION('',(1.224646799147E-16,1.,-0.));+#1234 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1235 = ORIENTED_EDGE('',*,*,#1012,.T.);+#1236 = ORIENTED_EDGE('',*,*,#1237,.T.);+#1237 = EDGE_CURVE('',#1004,#1238,#1240,.T.);+#1238 = VERTEX_POINT('',#1239);+#1239 = CARTESIAN_POINT('',(1.5,4.06543697255,10.5));+#1240 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#1241,#1242,#1243,#1244,#1245,+#1246,#1247,#1248,#1249,#1250,#1251,#1252,#1253,#1254,#1255,#1256,+#1257),.UNSPECIFIED.,.F.,.F.,(7,5,5,7),(0.,0.292545836451,+0.586684026067,1.),.UNSPECIFIED.);+#1241 = CARTESIAN_POINT('',(1.5,4.769696007085,9.833333333333));+#1242 = CARTESIAN_POINT('',(1.5,4.769696001668,9.8850036969));+#1243 = CARTESIAN_POINT('',(1.5,4.76465814093,9.936677106424));+#1244 = CARTESIAN_POINT('',(1.5,4.754581984896,9.987765117896));+#1245 = CARTESIAN_POINT('',(1.5,4.739571435322,10.037690905455));+#1246 = CARTESIAN_POINT('',(1.5,4.719826328517,10.085906943179));+#1247 = CARTESIAN_POINT('',(1.5,4.671310046965,10.178168843933));+#1248 = CARTESIAN_POINT('',(1.5,4.642487760068,10.222195378082));+#1249 = CARTESIAN_POINT('',(1.5,4.609458171659,10.263484248631));+#1250 = CARTESIAN_POINT('',(1.5,4.572590629578,10.301592557186));+#1251 = CARTESIAN_POINT('',(1.5,4.532315346484,10.336148036577));+#1252 = CARTESIAN_POINT('',(1.5,4.428389066153,10.410002586264));+#1253 = CARTESIAN_POINT('',(1.5,4.361871499493,10.445556014408));+#1254 = CARTESIAN_POINT('',(1.5,4.290865344823,10.472691103556));+#1255 = CARTESIAN_POINT('',(1.5,4.216810183434,10.490911731197));+#1256 = CARTESIAN_POINT('',(1.5,4.141175889764,10.499999992917));+#1257 = CARTESIAN_POINT('',(1.5,4.06543697255,10.5));+#1258 = ORIENTED_EDGE('',*,*,#1259,.F.);+#1259 = EDGE_CURVE('',#1228,#1238,#1260,.T.);+#1260 = CIRCLE('',#1261,4.333333333333);+#1261 = AXIS2_PLACEMENT_3D('',#1262,#1263,#1264);+#1262 = CARTESIAN_POINT('',(0.,0.,10.5));+#1263 = DIRECTION('',(0.,0.,-1.));+#1264 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1265 = TOROIDAL_SURFACE('',#1266,4.333333333333,0.666666666667);+#1266 = AXIS2_PLACEMENT_3D('',#1267,#1268,#1269);+#1267 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#1268 = DIRECTION('',(0.,0.,1.));+#1269 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1270 = ADVANCED_FACE('',(#1271),#1305,.T.);+#1271 = FACE_BOUND('',#1272,.F.);+#1272 = EDGE_LOOP('',(#1273,#1274,#1275,#1276,#1298));+#1273 = ORIENTED_EDGE('',*,*,#1237,.F.);+#1274 = ORIENTED_EDGE('',*,*,#1003,.T.);+#1275 = ORIENTED_EDGE('',*,*,#994,.T.);+#1276 = ORIENTED_EDGE('',*,*,#1277,.T.);+#1277 = EDGE_CURVE('',#986,#1278,#1280,.T.);+#1278 = VERTEX_POINT('',#1279);+#1279 = CARTESIAN_POINT('',(1.5,-4.06543697255,10.5));+#1280 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#1281,#1282,#1283,#1284,#1285,+#1286,#1287,#1288,#1289,#1290,#1291,#1292,#1293,#1294,#1295,#1296,+#1297),.UNSPECIFIED.,.F.,.F.,(7,5,5,7),(0.,0.29254583645,+0.586684026066,1.),.UNSPECIFIED.);+#1281 = CARTESIAN_POINT('',(1.5,-4.769696007085,9.833333333333));+#1282 = CARTESIAN_POINT('',(1.5,-4.769696001668,9.8850036969));+#1283 = CARTESIAN_POINT('',(1.5,-4.76465814093,9.936677106424));+#1284 = CARTESIAN_POINT('',(1.5,-4.754581984896,9.987765117896));+#1285 = CARTESIAN_POINT('',(1.5,-4.739571435322,10.037690905455));+#1286 = CARTESIAN_POINT('',(1.5,-4.719826328517,10.085906943179));+#1287 = CARTESIAN_POINT('',(1.5,-4.671310046966,10.178168843933));+#1288 = CARTESIAN_POINT('',(1.5,-4.642487760068,10.222195378082));+#1289 = CARTESIAN_POINT('',(1.5,-4.609458171659,10.26348424863));+#1290 = CARTESIAN_POINT('',(1.5,-4.572590629578,10.301592557186));+#1291 = CARTESIAN_POINT('',(1.5,-4.532315346484,10.336148036576));+#1292 = CARTESIAN_POINT('',(1.5,-4.428389066154,10.410002586264));+#1293 = CARTESIAN_POINT('',(1.5,-4.361871499493,10.445556014408));+#1294 = CARTESIAN_POINT('',(1.5,-4.290865344823,10.472691103556));+#1295 = CARTESIAN_POINT('',(1.5,-4.216810183435,10.490911731197));+#1296 = CARTESIAN_POINT('',(1.5,-4.141175889764,10.499999992917));+#1297 = CARTESIAN_POINT('',(1.5,-4.06543697255,10.5));+#1298 = ORIENTED_EDGE('',*,*,#1299,.F.);+#1299 = EDGE_CURVE('',#1238,#1278,#1300,.T.);+#1300 = CIRCLE('',#1301,4.333333333333);+#1301 = AXIS2_PLACEMENT_3D('',#1302,#1303,#1304);+#1302 = CARTESIAN_POINT('',(0.,0.,10.5));+#1303 = DIRECTION('',(0.,0.,-1.));+#1304 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1305 = TOROIDAL_SURFACE('',#1306,4.333333333333,0.666666666667);+#1306 = AXIS2_PLACEMENT_3D('',#1307,#1308,#1309);+#1307 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#1308 = DIRECTION('',(0.,0.,1.));+#1309 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1310 = ADVANCED_FACE('',(#1311),#1323,.T.);+#1311 = FACE_BOUND('',#1312,.F.);+#1312 = EDGE_LOOP('',(#1313,#1314,#1315,#1322));+#1313 = ORIENTED_EDGE('',*,*,#985,.T.);+#1314 = ORIENTED_EDGE('',*,*,#1227,.T.);+#1315 = ORIENTED_EDGE('',*,*,#1316,.F.);+#1316 = EDGE_CURVE('',#1278,#1228,#1317,.T.);+#1317 = CIRCLE('',#1318,4.333333333333);+#1318 = AXIS2_PLACEMENT_3D('',#1319,#1320,#1321);+#1319 = CARTESIAN_POINT('',(0.,0.,10.5));+#1320 = DIRECTION('',(0.,0.,-1.));+#1321 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1322 = ORIENTED_EDGE('',*,*,#1277,.F.);+#1323 = TOROIDAL_SURFACE('',#1324,4.333333333333,0.666666666667);+#1324 = AXIS2_PLACEMENT_3D('',#1325,#1326,#1327);+#1325 = CARTESIAN_POINT('',(0.,0.,9.833333333333));+#1326 = DIRECTION('',(0.,0.,1.));+#1327 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1328 = ADVANCED_FACE('',(#1329),#1335,.F.);+#1329 = FACE_BOUND('',#1330,.F.);+#1330 = EDGE_LOOP('',(#1331,#1332,#1333,#1334));+#1331 = ORIENTED_EDGE('',*,*,#1196,.T.);+#1332 = ORIENTED_EDGE('',*,*,#1047,.T.);+#1333 = ORIENTED_EDGE('',*,*,#1071,.T.);+#1334 = ORIENTED_EDGE('',*,*,#1097,.T.);+#1335 = PLANE('',#1336);+#1336 = AXIS2_PLACEMENT_3D('',#1337,#1338,#1339);+#1337 = CARTESIAN_POINT('',(-4.251343967025,5.206394781291E-16,0.));+#1338 = DIRECTION('',(0.,0.,1.));+#1339 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1340 = ADVANCED_FACE('',(#1341),#1347,.F.);+#1341 = FACE_BOUND('',#1342,.F.);+#1342 = EDGE_LOOP('',(#1343,#1344,#1345,#1346));+#1343 = ORIENTED_EDGE('',*,*,#1213,.T.);+#1344 = ORIENTED_EDGE('',*,*,#1129,.T.);+#1345 = ORIENTED_EDGE('',*,*,#1153,.T.);+#1346 = ORIENTED_EDGE('',*,*,#1179,.T.);+#1347 = PLANE('',#1348);+#1348 = AXIS2_PLACEMENT_3D('',#1349,#1350,#1351);+#1349 = CARTESIAN_POINT('',(4.251343967025,-1.041278956258E-15,0.));+#1350 = DIRECTION('',(0.,0.,1.));+#1351 = DIRECTION('',(1.,-2.449293598295E-16,0.));+#1352 = ADVANCED_FACE('',(#1353),#1363,.F.);+#1353 = FACE_BOUND('',#1354,.F.);+#1354 = EDGE_LOOP('',(#1355,#1356,#1357));+#1355 = ORIENTED_EDGE('',*,*,#1316,.T.);+#1356 = ORIENTED_EDGE('',*,*,#1259,.T.);+#1357 = ORIENTED_EDGE('',*,*,#1358,.T.);+#1358 = EDGE_CURVE('',#1238,#1278,#1359,.T.);+#1359 = LINE('',#1360,#1361);+#1360 = CARTESIAN_POINT('',(1.5,5.,10.5));+#1361 = VECTOR('',#1362,1.);+#1362 = DIRECTION('',(-1.224646799147E-16,-1.,0.));+#1363 = PLANE('',#1364);+#1364 = AXIS2_PLACEMENT_3D('',#1365,#1366,#1367);+#1365 = CARTESIAN_POINT('',(0.,0.,10.5));+#1366 = DIRECTION('',(-0.,0.,-1.));+#1367 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1368 = ADVANCED_FACE('',(#1369),#1373,.T.);+#1369 = FACE_BOUND('',#1370,.T.);+#1370 = EDGE_LOOP('',(#1371,#1372));+#1371 = ORIENTED_EDGE('',*,*,#1299,.F.);+#1372 = ORIENTED_EDGE('',*,*,#1358,.T.);+#1373 = PLANE('',#1374);+#1374 = AXIS2_PLACEMENT_3D('',#1375,#1376,#1377);+#1375 = CARTESIAN_POINT('',(5.,5.,10.5));+#1376 = DIRECTION('',(0.,0.,1.));+#1377 = DIRECTION('',(-1.,1.224646799147E-16,0.));+#1378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1382))+GLOBAL_UNIT_ASSIGNED_CONTEXT((#1379,#1380,#1381)) REPRESENTATION_CONTEXT+('Context #1','3D Context with UNIT and UNCERTAINTY') );+#1379 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#1380 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#1381 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#1382 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.E-06),#1379,+'distance_accuracy_value','confusion accuracy');+#1383 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#1384 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+#1385,#1393,#1400,#1407,#1415,#1422,#1429,#1436,#1443,#1450,#1457,+#1464,#1471,#1478,#1485,#1492,#1499,#1506,#1513,#1520,#1527,#1534,+#1541,#1548,#1555,#1562,#1569,#1576,#1583,#1590,#1597,#1604,#1611,+#1618,#1625,#1632,#1639,#1646,#1653,#1660,#1667),#1378);+#1385 = STYLED_ITEM('color',(#1386),#17);+#1386 = PRESENTATION_STYLE_ASSIGNMENT((#1387));+#1387 = SURFACE_STYLE_USAGE(.BOTH.,#1388);+#1388 = SURFACE_SIDE_STYLE('',(#1389));+#1389 = SURFACE_STYLE_FILL_AREA(#1390);+#1390 = FILL_AREA_STYLE('',(#1391));+#1391 = FILL_AREA_STYLE_COLOUR('',#1392);+#1392 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812);+#1393 = STYLED_ITEM('color',(#1394),#60);+#1394 = PRESENTATION_STYLE_ASSIGNMENT((#1395));+#1395 = SURFACE_STYLE_USAGE(.BOTH.,#1396);+#1396 = SURFACE_SIDE_STYLE('',(#1397));+#1397 = SURFACE_STYLE_FILL_AREA(#1398);+#1398 = FILL_AREA_STYLE('',(#1399));+#1399 = FILL_AREA_STYLE_COLOUR('',#1392);+#1400 = STYLED_ITEM('color',(#1401),#86);+#1401 = PRESENTATION_STYLE_ASSIGNMENT((#1402));+#1402 = SURFACE_STYLE_USAGE(.BOTH.,#1403);+#1403 = SURFACE_SIDE_STYLE('',(#1404));+#1404 = SURFACE_STYLE_FILL_AREA(#1405);+#1405 = FILL_AREA_STYLE('',(#1406));+#1406 = FILL_AREA_STYLE_COLOUR('',#1392);+#1407 = STYLED_ITEM('color',(#1408),#159);+#1408 = PRESENTATION_STYLE_ASSIGNMENT((#1409));+#1409 = SURFACE_STYLE_USAGE(.BOTH.,#1410);+#1410 = SURFACE_SIDE_STYLE('',(#1411));+#1411 = SURFACE_STYLE_FILL_AREA(#1412);+#1412 = FILL_AREA_STYLE('',(#1413));+#1413 = FILL_AREA_STYLE_COLOUR('',#1414);+#1414 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828);+#1415 = STYLED_ITEM('color',(#1416),#238);+#1416 = PRESENTATION_STYLE_ASSIGNMENT((#1417));+#1417 = SURFACE_STYLE_USAGE(.BOTH.,#1418);+#1418 = SURFACE_SIDE_STYLE('',(#1419));+#1419 = SURFACE_STYLE_FILL_AREA(#1420);+#1420 = FILL_AREA_STYLE('',(#1421));+#1421 = FILL_AREA_STYLE_COLOUR('',#1392);+#1422 = STYLED_ITEM('color',(#1423),#278);+#1423 = PRESENTATION_STYLE_ASSIGNMENT((#1424));+#1424 = SURFACE_STYLE_USAGE(.BOTH.,#1425);+#1425 = SURFACE_SIDE_STYLE('',(#1426));+#1426 = SURFACE_STYLE_FILL_AREA(#1427);+#1427 = FILL_AREA_STYLE('',(#1428));+#1428 = FILL_AREA_STYLE_COLOUR('',#1414);+#1429 = STYLED_ITEM('color',(#1430),#357);+#1430 = PRESENTATION_STYLE_ASSIGNMENT((#1431));+#1431 = SURFACE_STYLE_USAGE(.BOTH.,#1432);+#1432 = SURFACE_SIDE_STYLE('',(#1433));+#1433 = SURFACE_STYLE_FILL_AREA(#1434);+#1434 = FILL_AREA_STYLE('',(#1435));+#1435 = FILL_AREA_STYLE_COLOUR('',#1414);+#1436 = STYLED_ITEM('color',(#1437),#382);+#1437 = PRESENTATION_STYLE_ASSIGNMENT((#1438));+#1438 = SURFACE_STYLE_USAGE(.BOTH.,#1439);+#1439 = SURFACE_SIDE_STYLE('',(#1440));+#1440 = SURFACE_STYLE_FILL_AREA(#1441);+#1441 = FILL_AREA_STYLE('',(#1442));+#1442 = FILL_AREA_STYLE_COLOUR('',#1414);+#1443 = STYLED_ITEM('color',(#1444),#407);+#1444 = PRESENTATION_STYLE_ASSIGNMENT((#1445));+#1445 = SURFACE_STYLE_USAGE(.BOTH.,#1446);+#1446 = SURFACE_SIDE_STYLE('',(#1447));+#1447 = SURFACE_STYLE_FILL_AREA(#1448);+#1448 = FILL_AREA_STYLE('',(#1449));+#1449 = FILL_AREA_STYLE_COLOUR('',#1414);+#1450 = STYLED_ITEM('color',(#1451),#463);+#1451 = PRESENTATION_STYLE_ASSIGNMENT((#1452));+#1452 = SURFACE_STYLE_USAGE(.BOTH.,#1453);+#1453 = SURFACE_SIDE_STYLE('',(#1454));+#1454 = SURFACE_STYLE_FILL_AREA(#1455);+#1455 = FILL_AREA_STYLE('',(#1456));+#1456 = FILL_AREA_STYLE_COLOUR('',#1414);+#1457 = STYLED_ITEM('color',(#1458),#519);+#1458 = PRESENTATION_STYLE_ASSIGNMENT((#1459));+#1459 = SURFACE_STYLE_USAGE(.BOTH.,#1460);+#1460 = SURFACE_SIDE_STYLE('',(#1461));+#1461 = SURFACE_STYLE_FILL_AREA(#1462);+#1462 = FILL_AREA_STYLE('',(#1463));+#1463 = FILL_AREA_STYLE_COLOUR('',#1414);+#1464 = STYLED_ITEM('color',(#1465),#544);+#1465 = PRESENTATION_STYLE_ASSIGNMENT((#1466));+#1466 = SURFACE_STYLE_USAGE(.BOTH.,#1467);+#1467 = SURFACE_SIDE_STYLE('',(#1468));+#1468 = SURFACE_STYLE_FILL_AREA(#1469);+#1469 = FILL_AREA_STYLE('',(#1470));+#1470 = FILL_AREA_STYLE_COLOUR('',#1414);+#1471 = STYLED_ITEM('color',(#1472),#569);+#1472 = PRESENTATION_STYLE_ASSIGNMENT((#1473));+#1473 = SURFACE_STYLE_USAGE(.BOTH.,#1474);+#1474 = SURFACE_SIDE_STYLE('',(#1475));+#1475 = SURFACE_STYLE_FILL_AREA(#1476);+#1476 = FILL_AREA_STYLE('',(#1477));+#1477 = FILL_AREA_STYLE_COLOUR('',#1414);+#1478 = STYLED_ITEM('color',(#1479),#634);+#1479 = PRESENTATION_STYLE_ASSIGNMENT((#1480));+#1480 = SURFACE_STYLE_USAGE(.BOTH.,#1481);+#1481 = SURFACE_SIDE_STYLE('',(#1482));+#1482 = SURFACE_STYLE_FILL_AREA(#1483);+#1483 = FILL_AREA_STYLE('',(#1484));+#1484 = FILL_AREA_STYLE_COLOUR('',#1392);+#1485 = STYLED_ITEM('color',(#1486),#707);+#1486 = PRESENTATION_STYLE_ASSIGNMENT((#1487));+#1487 = SURFACE_STYLE_USAGE(.BOTH.,#1488);+#1488 = SURFACE_SIDE_STYLE('',(#1489));+#1489 = SURFACE_STYLE_FILL_AREA(#1490);+#1490 = FILL_AREA_STYLE('',(#1491));+#1491 = FILL_AREA_STYLE_COLOUR('',#1414);+#1492 = STYLED_ITEM('color',(#1493),#793);+#1493 = PRESENTATION_STYLE_ASSIGNMENT((#1494));+#1494 = SURFACE_STYLE_USAGE(.BOTH.,#1495);+#1495 = SURFACE_SIDE_STYLE('',(#1496));+#1496 = SURFACE_STYLE_FILL_AREA(#1497);+#1497 = FILL_AREA_STYLE('',(#1498));+#1498 = FILL_AREA_STYLE_COLOUR('',#1414);+#1499 = STYLED_ITEM('color',(#1500),#810);+#1500 = PRESENTATION_STYLE_ASSIGNMENT((#1501));+#1501 = SURFACE_STYLE_USAGE(.BOTH.,#1502);+#1502 = SURFACE_SIDE_STYLE('',(#1503));+#1503 = SURFACE_STYLE_FILL_AREA(#1504);+#1504 = FILL_AREA_STYLE('',(#1505));+#1505 = FILL_AREA_STYLE_COLOUR('',#1392);+#1506 = STYLED_ITEM('color',(#1507),#841);+#1507 = PRESENTATION_STYLE_ASSIGNMENT((#1508));+#1508 = SURFACE_STYLE_USAGE(.BOTH.,#1509);+#1509 = SURFACE_SIDE_STYLE('',(#1510));+#1510 = SURFACE_STYLE_FILL_AREA(#1511);+#1511 = FILL_AREA_STYLE('',(#1512));+#1512 = FILL_AREA_STYLE_COLOUR('',#1414);+#1513 = STYLED_ITEM('color',(#1514),#853);+#1514 = PRESENTATION_STYLE_ASSIGNMENT((#1515));+#1515 = SURFACE_STYLE_USAGE(.BOTH.,#1516);+#1516 = SURFACE_SIDE_STYLE('',(#1517));+#1517 = SURFACE_STYLE_FILL_AREA(#1518);+#1518 = FILL_AREA_STYLE('',(#1519));+#1519 = FILL_AREA_STYLE_COLOUR('',#1414);+#1520 = STYLED_ITEM('color',(#1521),#870);+#1521 = PRESENTATION_STYLE_ASSIGNMENT((#1522));+#1522 = SURFACE_STYLE_USAGE(.BOTH.,#1523);+#1523 = SURFACE_SIDE_STYLE('',(#1524));+#1524 = SURFACE_STYLE_FILL_AREA(#1525);+#1525 = FILL_AREA_STYLE('',(#1526));+#1526 = FILL_AREA_STYLE_COLOUR('',#1414);+#1527 = STYLED_ITEM('color',(#1528),#882);+#1528 = PRESENTATION_STYLE_ASSIGNMENT((#1529));+#1529 = SURFACE_STYLE_USAGE(.BOTH.,#1530);+#1530 = SURFACE_SIDE_STYLE('',(#1531));+#1531 = SURFACE_STYLE_FILL_AREA(#1532);+#1532 = FILL_AREA_STYLE('',(#1533));+#1533 = FILL_AREA_STYLE_COLOUR('',#1414);+#1534 = STYLED_ITEM('color',(#1535),#900);+#1535 = PRESENTATION_STYLE_ASSIGNMENT((#1536));+#1536 = SURFACE_STYLE_USAGE(.BOTH.,#1537);+#1537 = SURFACE_SIDE_STYLE('',(#1538));+#1538 = SURFACE_STYLE_FILL_AREA(#1539);+#1539 = FILL_AREA_STYLE('',(#1540));+#1540 = FILL_AREA_STYLE_COLOUR('',#1414);+#1541 = STYLED_ITEM('color',(#1542),#912);+#1542 = PRESENTATION_STYLE_ASSIGNMENT((#1543));+#1543 = SURFACE_STYLE_USAGE(.BOTH.,#1544);+#1544 = SURFACE_SIDE_STYLE('',(#1545));+#1545 = SURFACE_STYLE_FILL_AREA(#1546);+#1546 = FILL_AREA_STYLE('',(#1547));+#1547 = FILL_AREA_STYLE_COLOUR('',#1414);+#1548 = STYLED_ITEM('color',(#1549),#930);+#1549 = PRESENTATION_STYLE_ASSIGNMENT((#1550));+#1550 = SURFACE_STYLE_USAGE(.BOTH.,#1551);+#1551 = SURFACE_SIDE_STYLE('',(#1552));+#1552 = SURFACE_STYLE_FILL_AREA(#1553);+#1553 = FILL_AREA_STYLE('',(#1554));+#1554 = FILL_AREA_STYLE_COLOUR('',#1414);+#1555 = STYLED_ITEM('color',(#1556),#942);+#1556 = PRESENTATION_STYLE_ASSIGNMENT((#1557));+#1557 = SURFACE_STYLE_USAGE(.BOTH.,#1558);+#1558 = SURFACE_SIDE_STYLE('',(#1559));+#1559 = SURFACE_STYLE_FILL_AREA(#1560);+#1560 = FILL_AREA_STYLE('',(#1561));+#1561 = FILL_AREA_STYLE_COLOUR('',#1392);+#1562 = STYLED_ITEM('color',(#1563),#973);+#1563 = PRESENTATION_STYLE_ASSIGNMENT((#1564));+#1564 = SURFACE_STYLE_USAGE(.BOTH.,#1565);+#1565 = SURFACE_SIDE_STYLE('',(#1566));+#1566 = SURFACE_STYLE_FILL_AREA(#1567);+#1567 = FILL_AREA_STYLE('',(#1568));+#1568 = FILL_AREA_STYLE_COLOUR('',#1392);+#1569 = STYLED_ITEM('color',(#1570),#1025);+#1570 = PRESENTATION_STYLE_ASSIGNMENT((#1571));+#1571 = SURFACE_STYLE_USAGE(.BOTH.,#1572);+#1572 = SURFACE_SIDE_STYLE('',(#1573));+#1573 = SURFACE_STYLE_FILL_AREA(#1574);+#1574 = FILL_AREA_STYLE('',(#1575));+#1575 = FILL_AREA_STYLE_COLOUR('',#1392);+#1576 = STYLED_ITEM('color',(#1577),#1057);+#1577 = PRESENTATION_STYLE_ASSIGNMENT((#1578));+#1578 = SURFACE_STYLE_USAGE(.BOTH.,#1579);+#1579 = SURFACE_SIDE_STYLE('',(#1580));+#1580 = SURFACE_STYLE_FILL_AREA(#1581);+#1581 = FILL_AREA_STYLE('',(#1582));+#1582 = FILL_AREA_STYLE_COLOUR('',#1392);+#1583 = STYLED_ITEM('color',(#1584),#1082);+#1584 = PRESENTATION_STYLE_ASSIGNMENT((#1585));+#1585 = SURFACE_STYLE_USAGE(.BOTH.,#1586);+#1586 = SURFACE_SIDE_STYLE('',(#1587));+#1587 = SURFACE_STYLE_FILL_AREA(#1588);+#1588 = FILL_AREA_STYLE('',(#1589));+#1589 = FILL_AREA_STYLE_COLOUR('',#1392);+#1590 = STYLED_ITEM('color',(#1591),#1107);+#1591 = PRESENTATION_STYLE_ASSIGNMENT((#1592));+#1592 = SURFACE_STYLE_USAGE(.BOTH.,#1593);+#1593 = SURFACE_SIDE_STYLE('',(#1594));+#1594 = SURFACE_STYLE_FILL_AREA(#1595);+#1595 = FILL_AREA_STYLE('',(#1596));+#1596 = FILL_AREA_STYLE_COLOUR('',#1392);+#1597 = STYLED_ITEM('color',(#1598),#1139);+#1598 = PRESENTATION_STYLE_ASSIGNMENT((#1599));+#1599 = SURFACE_STYLE_USAGE(.BOTH.,#1600);+#1600 = SURFACE_SIDE_STYLE('',(#1601));+#1601 = SURFACE_STYLE_FILL_AREA(#1602);+#1602 = FILL_AREA_STYLE('',(#1603));+#1603 = FILL_AREA_STYLE_COLOUR('',#1392);+#1604 = STYLED_ITEM('color',(#1605),#1164);+#1605 = PRESENTATION_STYLE_ASSIGNMENT((#1606));+#1606 = SURFACE_STYLE_USAGE(.BOTH.,#1607);+#1607 = SURFACE_SIDE_STYLE('',(#1608));+#1608 = SURFACE_STYLE_FILL_AREA(#1609);+#1609 = FILL_AREA_STYLE('',(#1610));+#1610 = FILL_AREA_STYLE_COLOUR('',#1392);+#1611 = STYLED_ITEM('color',(#1612),#1189);+#1612 = PRESENTATION_STYLE_ASSIGNMENT((#1613));+#1613 = SURFACE_STYLE_USAGE(.BOTH.,#1614);+#1614 = SURFACE_SIDE_STYLE('',(#1615));+#1615 = SURFACE_STYLE_FILL_AREA(#1616);+#1616 = FILL_AREA_STYLE('',(#1617));+#1617 = FILL_AREA_STYLE_COLOUR('',#1392);+#1618 = STYLED_ITEM('color',(#1619),#1206);+#1619 = PRESENTATION_STYLE_ASSIGNMENT((#1620));+#1620 = SURFACE_STYLE_USAGE(.BOTH.,#1621);+#1621 = SURFACE_SIDE_STYLE('',(#1622));+#1622 = SURFACE_STYLE_FILL_AREA(#1623);+#1623 = FILL_AREA_STYLE('',(#1624));+#1624 = FILL_AREA_STYLE_COLOUR('',#1392);+#1625 = STYLED_ITEM('color',(#1626),#1223);+#1626 = PRESENTATION_STYLE_ASSIGNMENT((#1627));+#1627 = SURFACE_STYLE_USAGE(.BOTH.,#1628);+#1628 = SURFACE_SIDE_STYLE('',(#1629));+#1629 = SURFACE_STYLE_FILL_AREA(#1630);+#1630 = FILL_AREA_STYLE('',(#1631));+#1631 = FILL_AREA_STYLE_COLOUR('',#1392);+#1632 = STYLED_ITEM('color',(#1633),#1270);+#1633 = PRESENTATION_STYLE_ASSIGNMENT((#1634));+#1634 = SURFACE_STYLE_USAGE(.BOTH.,#1635);+#1635 = SURFACE_SIDE_STYLE('',(#1636));+#1636 = SURFACE_STYLE_FILL_AREA(#1637);+#1637 = FILL_AREA_STYLE('',(#1638));+#1638 = FILL_AREA_STYLE_COLOUR('',#1414);+#1639 = STYLED_ITEM('color',(#1640),#1310);+#1640 = PRESENTATION_STYLE_ASSIGNMENT((#1641));+#1641 = SURFACE_STYLE_USAGE(.BOTH.,#1642);+#1642 = SURFACE_SIDE_STYLE('',(#1643));+#1643 = SURFACE_STYLE_FILL_AREA(#1644);+#1644 = FILL_AREA_STYLE('',(#1645));+#1645 = FILL_AREA_STYLE_COLOUR('',#1392);+#1646 = STYLED_ITEM('color',(#1647),#1328);+#1647 = PRESENTATION_STYLE_ASSIGNMENT((#1648));+#1648 = SURFACE_STYLE_USAGE(.BOTH.,#1649);+#1649 = SURFACE_SIDE_STYLE('',(#1650));+#1650 = SURFACE_STYLE_FILL_AREA(#1651);+#1651 = FILL_AREA_STYLE('',(#1652));+#1652 = FILL_AREA_STYLE_COLOUR('',#1392);+#1653 = STYLED_ITEM('color',(#1654),#1340);+#1654 = PRESENTATION_STYLE_ASSIGNMENT((#1655));+#1655 = SURFACE_STYLE_USAGE(.BOTH.,#1656);+#1656 = SURFACE_SIDE_STYLE('',(#1657));+#1657 = SURFACE_STYLE_FILL_AREA(#1658);+#1658 = FILL_AREA_STYLE('',(#1659));+#1659 = FILL_AREA_STYLE_COLOUR('',#1392);+#1660 = STYLED_ITEM('color',(#1661),#1352);+#1661 = PRESENTATION_STYLE_ASSIGNMENT((#1662));+#1662 = SURFACE_STYLE_USAGE(.BOTH.,#1663);+#1663 = SURFACE_SIDE_STYLE('',(#1664));+#1664 = SURFACE_STYLE_FILL_AREA(#1665);+#1665 = FILL_AREA_STYLE('',(#1666));+#1666 = FILL_AREA_STYLE_COLOUR('',#1392);+#1667 = STYLED_ITEM('color',(#1668),#1368);+#1668 = PRESENTATION_STYLE_ASSIGNMENT((#1669));+#1669 = SURFACE_STYLE_USAGE(.BOTH.,#1670);+#1670 = SURFACE_SIDE_STYLE('',(#1671));+#1671 = SURFACE_STYLE_FILL_AREA(#1672);+#1672 = FILL_AREA_STYLE('',(#1673));+#1673 = FILL_AREA_STYLE_COLOUR('',#1414);+ENDSEC;+END-ISO-10303-21;
verification.jsonadded+81
@@ -0,0 +1,81 @@+{+ "schema": "adom/verification@1",+ "part": "RVT1J101M1010",+ "variants": [],+ "entries": [+  {+   "date": "2026-10-16",+   "by": {+    "name": "Claude (AI build)",+    "handle": "claude"+   },+   "status": "open",+   "title": "Automated build checks (awaiting human validation)",+   "scope": [+    "symbol",+    "footprint",+    "3d",+    "pins"+   ],+   "variants": [+    "*"+   ],+   "checks": [+    {+     "text": "Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)",+     "result": "pass"+    },+    {+     "text": "3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)",+     "result": "pass"+    },+    {+     "text": "adom-lbr generate + lint passed",+     "result": "pass"+    },+    {+     "text": "2 of 2 pins described",+     "result": "pass"+    },+    {+     "text": "Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing",+     "result": "note"+    }+   ],+   "evidence": [+    {+     "label": "datasheet",+     "href": "docs/rvt1j101m1010-datasheet.pdf"+    }+   ],+   "files": {+    "rvt1j101m1010.kicad_sym": "928b6cd5313e49d81c92701a75ae08157ba71f9a6963a72f00285110225a71cc",+    "rvt1j101m1010.kicad_mod": "157fd0d37afa1602b8debca5f7d1745125f7f7dcbf3aef471cfdcfdd4ceb91ff",+    "rvt1j101m1010.step": "866051839e3e1f725ea48390ac881121e55ce86e5ba54077cf13470e18135884"+   }+  },+  {+   "date": "2026-10-16",+   "by": {+    "name": "Claude (AI build)",+    "handle": "claude"+   },+   "status": "open",+   "title": "Datasheet (Honor Elec RVT series, via LCSC) is an image-only scan with Chinese labels; no ...",+   "scope": [+    "review"+   ],+   "variants": [+    "*"+   ],+   "checks": [+    {+     "text": "Datasheet (Honor Elec RVT series, via LCSC) is an image-only scan with Chinese labels; no text layer, so values cannot be text-checked.",+     "result": "note"+    }+   ],+   "evidence": [],+   "files": {}+  }+ ]+}\ No newline at end of file