main
Ray rts5411t-gr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) e4d4417
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607
{
  "schema_version": 1,
  "type": "component",
  "slug": "rts5411t-gr",
  "title": "RTS5411T-GR",
  "brief": "Realtek Semicon USB Converters, QFN-76(9x9). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "rts5411t-gr"
  ],
  "component": {
    "mpn": "RTS5411T-GR",
    "manufacturer": "Realtek Semicon",
    "package": "QFN-76(9x9)",
    "pin_count": 77,
    "category": "Interface",
    "subcategory": "USB Converters",
    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2403191045_Realtek-Semicon-RTS5411T-GR_C5159024.pdf",
    "parts": {
      "symbol": "rts5411t-gr.kicad_sym",
      "footprint": "rts5411t-gr.kicad_mod",
      "model_3d": "rts5411t-gr-etched.glb",
      "model_3d_plain": "rts5411t-gr.glb",
      "model_3d_step": "rts5411t-gr-etched.step",
      "model_3d_step_plain": "rts5411t-gr.step",
      "lbr": "rts5411t-gr.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "RREF",
        "type": "passive",
        "description": "Bandgap reference. Connect an external 6.2K ohm (+/-1%) resistor from this pin to reference GND."
      },
      {
        "number": "2",
        "name": "BPWR_DET",
        "type": "input",
        "description": "Upstream VBUS power detection pin. Active High (5V input buffer). 0 = upstream VBUS absent, 1 = upstream VBUS present."
      },
      {
        "number": "3",
        "name": "DV11",
        "type": "power_in",
        "description": "1.1V power supply for digital circuits."
      },
      {
        "number": "4",
        "name": "DV33",
        "type": "power_in",
        "description": "3.3V power supply for digital circuits (2.97-3.63V)."
      },
      {
        "number": "5",
        "name": "DSP2_DP",
        "type": "bidirectional",
        "description": "USB 2.0 D+ signal of Downstream Port 2."
      },
      {
        "number": "6",
        "name": "DSP2_DM",
        "type": "bidirectional",
        "description": "USB 2.0 D- signal of Downstream Port 2."
      },
      {
        "number": "7",
        "name": "AV11",
        "type": "power_in",
        "description": "1.1V power supply for analog circuits."
      },
      {
        "number": "8",
        "name": "DSP2_SSTX+",
        "type": "output",
        "description": "USB 3.2 Gen1x1 SuperSpeed TX+ of Downstream Port 2."
      },
      {
        "number": "9",
        "name": "DSP2_SSTX-",
        "type": "output",
        "description": "USB 3.2 Gen1x1 SuperSpeed TX- of Downstream Port 2."
      },
      {
        "number": "10",
        "name": "OCP2",
        "type": "input",
        "description": "Over-current protection flag for downstream port 2. 5V input buffer with internal 10K pull-up (valid in 'power switch' mode). Active low by default (F/W-configurable). 0 = over-current detected."
      },
      {
        "number": "11",
        "name": "DSP2_SSRX+",
        "type": "input",
        "description": "USB 3.2 Gen1x1 SuperSpeed RX+ of Downstream Port 2."
      },
      {
        "number": "12",
        "name": "DSP2_SSRX-",
        "type": "input",
        "description": "USB 3.2 Gen1x1 SuperSpeed RX- of Downstream Port 2."
      },
      {
        "number": "13",
        "name": "AV11",
        "type": "power_in",
        "description": "1.1V power supply for analog circuits."
      },
      {
        "number": "14",
        "name": "DSP3_SSTX+",
        "type": "output",
        "description": "USB 3.2 Gen1x1 SuperSpeed TX+ of Downstream Port 3."
      },
      {
        "number": "15",
        "name": "DSP3_SSTX-",
        "type": "output",
        "description": "USB 3.2 Gen1x1 SuperSpeed TX- of Downstream Port 3."
      },
      {
        "number": "16",
        "name": "OCP3",
        "type": "input",
        "description": "Over-current protection flag for downstream port 3. 5V input buffer with internal 10K pull-up (valid in 'power switch' mode). Active low by default. 0 = over-current detected."
      },
      {
        "number": "17",
        "name": "DSP3_SSRX+",
        "type": "input",
        "description": "USB 3.2 Gen1x1 SuperSpeed RX+ of Downstream Port 3."
      },
      {
        "number": "18",
        "name": "DSP3_SSRX-",
        "type": "input",
        "description": "USB 3.2 Gen1x1 SuperSpeed RX- of Downstream Port 3."
      },
      {
        "number": "19",
        "name": "AV11",
        "type": "power_in",
        "description": "1.1V power supply for analog circuits."
      },
      {
        "number": "20",
        "name": "DSP3_DP",
        "type": "bidirectional",
        "description": "USB 2.0 D+ signal of Downstream Port 3."
      },
      {
        "number": "21",
        "name": "DSP3_DM",
        "type": "bidirectional",
        "description": "USB 2.0 D- signal of Downstream Port 3."
      },
      {
        "number": "22",
        "name": "DV33",
        "type": "power_in",
        "description": "3.3V power supply for digital circuits."
      },
      {
        "number": "23",
        "name": "DSP4_DP",
        "type": "bidirectional",
        "description": "USB 2.0 D+ signal of Downstream Port 4."
      },
      {
        "number": "24",
        "name": "DSP4_DM",
        "type": "bidirectional",
        "description": "USB 2.0 D- signal of Downstream Port 4."
      },
      {
        "number": "25",
        "name": "AV11",
        "type": "power_in",
        "description": "1.1V power supply for analog circuits."
      },
      {
        "number": "26",
        "name": "DSP4_SSTX+",
        "type": "output",
        "description": "USB 3.2 Gen1x1 SuperSpeed TX+ of Downstream Port 4."
      },
      {
        "number": "27",
        "name": "DSP4_SSTX-",
        "type": "output",
        "description": "USB 3.2 Gen1x1 SuperSpeed TX- of Downstream Port 4."
      },
      {
        "number": "28",
        "name": "OCP4",
        "type": "input",
        "description": "Over-current protection flag for downstream port 4. 5V input buffer with internal 10K pull-up. Active low by default. 0 = over-current detected."
      },
      {
        "number": "29",
        "name": "DSP4_SSRX+",
        "type": "input",
        "description": "USB 3.2 Gen1x1 SuperSpeed RX+ of Downstream Port 4."
      },
      {
        "number": "30",
        "name": "DSP4_SSRX-",
        "type": "input",
        "description": "USB 3.2 Gen1x1 SuperSpeed RX- of Downstream Port 4."
      },
      {
        "number": "31",
        "name": "AV11",
        "type": "power_in",
        "description": "1.1V power supply for analog circuits."
      },
      {
        "number": "32",
        "name": "GPIO0/SMBCL",
        "type": "bidirectional",
        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port transmit/receive activity. Configurable as the SMBus clock (SMBCL) pin."
      },
      {
        "number": "33",
        "name": "GPIO1/SMBDA",
        "type": "bidirectional",
        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port over-current condition. Configurable as the SMBus data (SMBDA) pin."
      },
      {
        "number": "34",
        "name": "GPIO2/SCL",
        "type": "bidirectional",
        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port transmit/receive activity. Configurable as the I2C clock (SCL) pin."
      },
      {
        "number": "35",
        "name": "GPIO3/SDA",
        "type": "bidirectional",
        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port over-current condition. Configurable as the I2C data (SDA) pin."
      },
      {
        "number": "36",
        "name": "GPIO4",
        "type": "bidirectional",
        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port transmit/receive activity. Leave floating if unused."
      },
      {
        "number": "37",
        "name": "GPIO5",
        "type": "bidirectional",
        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port over-current condition."
      },
      {
        "number": "38",
        "name": "GPIO6",
        "type": "bidirectional",
        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port transmit/receive activity."
      },
      {
        "number": "39",
        "name": "GPIO7",
        "type": "bidirectional",
        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port over-current condition."
      },
      {
        "number": "40",
        "name": "DSP1_PWR",
        "type": "output",
        "description": "External VBUS power switch enable for downstream port 1. Open-drain output, active low by default (F/W can configure active high; then uses 3.3V push-pull). 0 = VBUS on, 1 = VBUS off. Leave floating if unused."
      },
      {
        "number": "41",
        "name": "DSP2_PWR",
        "type": "output",
        "description": "External VBUS power switch enable for downstream port 2. Open-drain, active low by default. 0 = VBUS on, 1 = VBUS off."
      },
      {
        "number": "42",
        "name": "DSP3_PWR",
        "type": "output",
        "description": "External VBUS power switch enable for downstream port 3. Open-drain, active low by default. 0 = VBUS on, 1 = VBUS off."
      },
      {
        "number": "43",
        "name": "DSP4_PWR",
        "type": "output",
        "description": "External VBUS power switch enable for downstream port 4. Open-drain, active low by default. 0 = VBUS on, 1 = VBUS off."
      },
      {
        "number": "44",
        "name": "SCK",
        "type": "output",
        "description": "SPI clock output to external Serial Flash memory. 3.3V bi-directional buffer."
      },
      {
        "number": "45",
        "name": "SCS",
        "type": "output",
        "description": "SPI chip-select output to external Serial Flash memory. 3.3V bi-directional buffer. Also sampled at power-on reset as a strap: 0 = execute code from internal ROM, 1 = execute code from external Serial Flash."
      },
      {
        "number": "46",
        "name": "MISO",
        "type": "input",
        "description": "SPI data input from external Serial Flash memory. 3.3V bi-directional buffer."
      },
      {
        "number": "47",
        "name": "MOSI",
        "type": "output",
        "description": "SPI data output to external Serial Flash memory. 3.3V bi-directional buffer."
      },
      {
        "number": "48",
        "name": "DV33",
        "type": "power_in",
        "description": "3.3V power supply for digital circuits."
      },
      {
        "number": "49",
        "name": "DV11",
        "type": "power_in",
        "description": "1.1V power supply for digital circuits."
      },
      {
        "number": "50",
        "name": "DV11",
        "type": "power_in",
        "description": "1.1V power supply for digital circuits."
      },
      {
        "number": "51",
        "name": "SWR_GND",
        "type": "power_in",
        "description": "Reference ground for the internal 1.1V switching regulator."
      },
      {
        "number": "52",
        "name": "SWR_OUT",
        "type": "power_out",
        "description": "5V-to-1.1V internal switching regulator output. Leave floating if internal switching regulator is not used."
      },
      {
        "number": "53",
        "name": "SWR_V5_IN",
        "type": "power_in",
        "description": "5V-to-1.1V switching regulator input (3.1-5.5V). Connect to LDO_V5_IN when internal switching regulator is not used."
      },
      {
        "number": "54",
        "name": "LDO_V5_IN",
        "type": "power_in",
        "description": "5V-to-3.3V internal LDO input (4.5-5.5V). Short to DV33 when on-chip LDO is not used."
      },
      {
        "number": "55",
        "name": "V33_OUT",
        "type": "power_out",
        "description": "3.3V output from the internal 5V-to-3.3V LDO. Short to DV33 when on-chip LDO is not used."
      },
      {
        "number": "56",
        "name": "USP_DP",
        "type": "bidirectional",
        "description": "USB 2.0 D+ signal of the Upstream Port."
      },
      {
        "number": "57",
        "name": "USP_DM",
        "type": "bidirectional",
        "description": "USB 2.0 D- signal of the Upstream Port."
      },
      {
        "number": "58",
        "name": "AV11",
        "type": "power_in",
        "description": "1.1V power supply for analog circuits."
      },
      {
        "number": "59",
        "name": "USP_SSTX-",
        "type": "output",
        "description": "USB 3.2 Gen1x1 SuperSpeed TX- of the Upstream Port."
      },
      {
        "number": "60",
        "name": "USP_SSTX+",
        "type": "output",
        "description": "USB 3.2 Gen1x1 SuperSpeed TX+ of the Upstream Port."
      },
      {
        "number": "61",
        "name": "GND",
        "type": "power_in",
        "description": "Reference ground."
      },
      {
        "number": "62",
        "name": "USP_SSRX-",
        "type": "input",
        "description": "USB 3.2 Gen1x1 SuperSpeed RX- of the Upstream Port."
      },
      {
        "number": "63",
        "name": "USP_SSRX+",
        "type": "input",
        "description": "USB 3.2 Gen1x1 SuperSpeed RX+ of the Upstream Port."
      },
      {
        "number": "64",
        "name": "AV11",
        "type": "power_in",
        "description": "1.1V power supply for analog circuits."
      },
      {
        "number": "65",
        "name": "DSP1_SSTX+",
        "type": "output",
        "description": "USB 3.2 Gen1x1 SuperSpeed TX+ of Downstream Port 1."
      },
      {
        "number": "66",
        "name": "DSP1_SSTX-",
        "type": "output",
        "description": "USB 3.2 Gen1x1 SuperSpeed TX- of Downstream Port 1."
      },
      {
        "number": "67",
        "name": "OCP1",
        "type": "input",
        "description": "Over-current protection flag for downstream port 1. 5V input buffer with internal 10K pull-up. Active low by default. 0 = over-current detected."
      },
      {
        "number": "68",
        "name": "DSP1_SSRX+",
        "type": "input",
        "description": "USB 3.2 Gen1x1 SuperSpeed RX+ of Downstream Port 1."
      },
      {
        "number": "69",
        "name": "DSP1_SSRX-",
        "type": "input",
        "description": "USB 3.2 Gen1x1 SuperSpeed RX- of Downstream Port 1."
      },
      {
        "number": "70",
        "name": "AV11",
        "type": "power_in",
        "description": "1.1V power supply for analog circuits."
      },
      {
        "number": "71",
        "name": "DSP1_DP",
        "type": "bidirectional",
        "description": "USB 2.0 D+ signal of Downstream Port 1."
      },
      {
        "number": "72",
        "name": "DSP1_DM",
        "type": "bidirectional",
        "description": "USB 2.0 D- signal of Downstream Port 1."
      },
      {
        "number": "73",
        "name": "DV33",
        "type": "power_in",
        "description": "3.3V power supply for digital circuits."
      },
      {
        "number": "74",
        "name": "XTLI",
        "type": "input",
        "description": "12 MHz crystal oscillator input. 3.3V clock interface."
      },
      {
        "number": "75",
        "name": "XTLO",
        "type": "output",
        "description": "12 MHz crystal oscillator output/drive. 3.3V clock interface."
      },
      {
        "number": "76",
        "name": "SPWR_DET",
        "type": "input",
        "description": "Self-power detection pin. 5V input buffer, active high. 0 = bus-power setting, 1 = self-power setting."
      },
      {
        "number": "EP",
        "name": "E-PAD",
        "type": "power_in",
        "description": "Exposed thermal pad on the bottom of the package. Must be connected to reference ground for thermal dissipation and electrical grounding."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2403191045_Realtek-Semicon-RTS5411T-GR_C5159024.pdf",
        "pages": 32,
        "sha256": "371452f35b4a4904",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 77,
        "described": 77,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "rts5411t-gr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9,
          9,
          0.87
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "3ab1064cae4fe9fd862cf68d892e572981a8eef91ec6d357d43dd753058ee5b3",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "rts5411t-gr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          9,
          9,
          0.87
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "fa1d50831e37573736d2c37f5fe540ef9ea9bb27bc84c5edc67c0f5772cca8b8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Realtek Semicon",
      "Package": "QFN-76(9x9)",
      "Category": "Interface",
      "Pins": "77"
    }
  },
  "variants": [
    {
      "mpn": "RTS5411T-GR",
      "kind": "packaging"
    }
  ],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "rts5411t-gr"
  ],
  "discovery_pitch": "RTS5411T-GR (Realtek Semicon) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "rts5411t-gr.kicad_sym",
    "rts5411t-gr.kicad_mod",
    "rts5411t-gr.glb",
    "rts5411t-gr.step",
    "rts5411t-gr.lbr",
    "docs/hero.png",
    "docs/rts5411t-gr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-25T05:22:30.528Z"
}