Generated by kicad-footprint-generator · KiCad file format 20260206
RTL8211FDI-CG
Realtek Semicon · Ethernet Transceivers · QFN-40-EP(5x5)
RTL8211FDI-CG from Realtek Semicon, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MDIP0 | bidirectional | MDI pair 0 positive; in MDI mode it carries BI_DA+ for 1000Base-T and is the transmit pair for 10/100Base-TX. |
| 2 | MDIN0 | bidirectional | MDI pair 0 negative; in MDI mode it carries BI_DA- for 1000Base-T and is the transmit pair for 10/100Base-TX. |
| 3 | AVDD10 | power_in | Analog power at 1.0V. |
| 4 | MDIP1 | bidirectional | MDI pair 1 positive; in MDI mode it carries BI_DB+ for 1000Base-T and is the receive pair for 10/100Base-TX. |
| 5 | MDIN1 | bidirectional | MDI pair 1 negative; in MDI mode it carries BI_DB- for 1000Base-T and is the receive pair for 10/100Base-TX. |
| 6 | MDIP2 | bidirectional | MDI pair 2 positive; carries BI_DC+ in MDI mode and BI_DD+ in MDI crossover mode for 1000Base-T. |
| 7 | MDIN2 | bidirectional | MDI pair 2 negative; carries BI_DC- in MDI mode and BI_DD- in MDI crossover mode for 1000Base-T. |
| 8 | AVDD10 | power_in | Analog power at 1.0V. |
| 9 | MDIP3 | bidirectional | MDI pair 3 positive; carries BI_DD+ in MDI mode and BI_DC+ in MDI crossover mode for 1000Base-T. |
| 10 | MDIN3 | bidirectional | MDI pair 3 negative; carries BI_DD- in MDI mode and BI_DC- in MDI crossover mode for 1000Base-T. |
| 11 | AVDD33 | power_in | Analog power at 3.3V. |
| 12 | PHYRSTB | input | Active-low hardware reset; must be asserted low for at least 10ms for a complete PHY reset, which clears all registers. |
| 13 | MDC | input | Management Data Clock input for the management interface. |
| 14 | MDIO | bidirectional | Management data input/output; pull up to 3.3/2.5/1.8/1.5V to match the I/O voltage. |
| 15 | TXD3 | input | RGMII transmit data bit 3 from the MAC to the PHY. |
| 16 | TXD2 | input | RGMII transmit data bit 2 from the MAC to the PHY. |
| 17 | TXD1 | input | RGMII transmit data bit 1 from the MAC to the PHY. |
| 18 | TXD0 | input | RGMII transmit data bit 0 from the MAC to the PHY. |
| 19 | TXCTL | input | RGMII transmit control signal from the MAC. |
| 20 | TXC | input | RGMII transmit reference clock, 125MHz, 25MHz or 2.5MHz depending on speed. |
| 21 | DVDD10 | power_in | Digital core power at 1.0V. |
| 22 | RXD3 | output | RGMII receive data bit 3 to the MAC; latched at power-up/reset as the PHYAD[0] configuration input via a 4.7k resistor. |
| 23 | RXD2 | output | RGMII receive data bit 2 to the MAC; latched at power-up/reset as the PLLOFF configuration input (stop PLL in ALDPS mode when pulled high). |
| 24 | RXD1 | output | RGMII receive data bit 1 to the MAC; latched at power-up/reset as the TXDLY configuration input (2ns TXC delay when pulled high). |
| 25 | RXD0 | output | RGMII receive data bit 0 to the MAC; latched at power-up/reset as the RXDLY configuration input (2ns RXC delay when pulled high). |
| 26 | RXCTL | output | RGMII receive control signal to the MAC; latched at power-up/reset as the PHYAD[2] configuration input. |
| 27 | RXC | output | RGMII receive reference clock of 125MHz, 25MHz or 2.5MHz derived from the received data; latched at power-up/reset as the PHYAD[1] configuration input. |
| 28 | DVDD_RG | power_in | Digital RGMII I/O pad power; when CFG_EXT is pulled high, connect to the external 3.3/2.5/1.8/1.5V RGMII I/O supply. |
| 29 | DVDD33 | power_in | Digital non-RGMII I/O power at 3.3V. |
| 30 | LDO_OUT | power_out | Low-dropout regulator 1.0V output on the RTL8211FD(I) LDO model (on the RTL8211F(I) switching model this pin is REG_OUT, which connects to a 2.2µH or 4.7µH inductor). |
| 31 | INTB/PMEB | output | Open-drain active-low interrupt output (INTB, default) or power management event output (PMEB when Page 0xd40 Reg22 bit5 = 1); supports 3.3V pull-up; keep floating if neither function is used. |
| 32 | CFG_EXT/LED0 | output | Latched at power-up/reset as CFG_EXT (I/O pad external power source mode; pull up for external supply, down for integrated LDO) and used as the LED0 output (10Mbps link/activity by default). |
| 33 | CFG_LDO0/LED1 | output | Latched at power-up/reset as CFG_LDO[0] for I/O pad voltage select; used as the LED1 output (100Mbps link/activity by default). |
| 34 | CFG_LDO1/LED2 | output | Latched at power-up/reset as CFG_LDO[1] for I/O pad voltage select; used as the LED2 output (1000Mbps link/activity by default). |
| 35 | CLKOUT | output | 125/25MHz reference clock generated from the internal PLL; keep floating if not used by the MAC. |
| 36 | XTAL_IN | input | 25MHz crystal input; connect to GND if an external 25MHz oscillator drives XTAL_OUT/EXT_CLK. |
| 37 | XTAL_OUT/EXT_CLK | output | 25MHz crystal output; if a 25MHz oscillator is used, connect this pin to the oscillator output per section 10.3. |
| 38 | AVDD10 | power_in | Analog power at 1.0V. |
| 39 | RSET | output | External resistor reference connection. |
| 40 | AVDD33 | power_in | Analog power at 3.3V. |
| 41 | GND | power_in | Ground; the exposed pad is the analog and digital ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Realtek Semicon |
| Package | QFN-40-EP(5x5) |
| Category | Interface |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DVDD33, AVDD33 supply voltage (absolute max) | VDD33, AVDD33 | -0.3 | 3.6 | V | 61 | ||
| AVDD10, DVDD10 supply voltage (absolute max) | AVDD10, DVDD10 | -0.3 | 1.2 | V | 61 | ||
| 2.5V RGMII/GMII supply voltage (absolute max) | -0.2 | 2.8 | V | 61 | |||
| 1.8V RGMII supply voltage (absolute max) | -0.2 | 2.3 | V | 61 | |||
| 1.5V RGMII supply voltage (absolute max) | -0.2 | 2 | V | 61 | |||
| 3.3V DC input/output voltage (absolute max) | -0.3 | 3.6 | V | 3.3V DC input / 3.3V DC output | 61 | ||
| 1.0V DC input/output voltage (absolute max) | -0.3 | 1.2 | V | 1.0V DC input / 1.0V DC output | 61 | ||
| Storage temperature | -55 | 125 | °C | 61 | |||
| DVDD33, AVDD33 supply voltage (recommended) | DVDD33, AVDD33 | 2.97 | 3.3 | 3.63 | V | 62 | |
| AVDD10, DVDD10 supply voltage (recommended) | AVDD10, DVDD10 | 0.95 | 1 | 1.05 | V | 62 | |
| 2.5V RGMII/GMII supply voltage (recommended) | VDD | 2.25 | 2.5 | 2.75 | V | 62 | |
| 1.8V RGMII supply voltage (recommended) | VDD | 1.62 | 1.8 | 1.98 | V | 62 | |
| 1.5V RGMII supply voltage (recommended) | VDD | 1.5 | 1.56 | 1.62 | V | 62 | |
| Ambient operating temperature (industrial) | TA | -40 | 85 | °C | RTL8211FI/RTL8211FDI (industrial grade) | 62 | |
| DVDD33, AVDD33 3.3V supply voltage (DC characteristics) | VDD33, AVDD33 | 2.97 | 3.3 | 3.63 | V | 63 | |
| 2.5V RGMII supply voltage (DC characteristics) | 2.25 | 2.5 | 2.75 | V | 63 | ||
| 1.8V RGMII supply voltage (DC characteristics) | 1.62 | 1.8 | 1.98 | V | 63 | ||
| 1.5V RGMII supply voltage (DC characteristics) | 1.5 | 1.56 | 1.62 | V | 63 | ||
| 1.0V supply voltage (DC characteristics) | DVDD10, AVDD10 | 0.95 | 1 | 1.05 | V | 63 | |
| Minimum high level output voltage (3.3V) | Voh (3.3V) | 2.4 | V | 63 | |||
| Minimum high level output voltage (2.5V) | Voh (2.5V) | 2 | V | 63 | |||
| Maximum low level output voltage (3.3V) | Vol (3.3V) | -0.3 | 0.4 | V | 63 | ||
| Maximum low level output voltage (2.5V) | Vol (2.5V) | -0.3 | 0.4 | V | 63 | ||
| Maximum low level output voltage (1.8V) | Vol (1.8V) | -0.3 | V | 63 | |||
| Maximum low level output voltage (1.5V) | Vol (1.5V) | -0.3 | V | 63 | |||
| Minimum high level input voltage (3.3V) | Vih (3.3V) | 2 | V | 63 | |||
| Maximum low level input voltage (3.3V) | Vil (3.3V) | 0.8 | V | 63 | |||
| Minimum high level input voltage (2.5V) | Vih (2.5V) | 1.7 | V | 63 | |||
| Maximum low level input voltage (2.5V) | Vil (2.5V) | 0.7 | V | 63 | |||
| Minimum high level input voltage (1.8V) | Vih (1.8V) | 1.2 | V | 63 | |||
| Maximum low level input voltage (1.8V) | Vil (1.8V) | 0.5 | V | 63 | |||
| Minimum high level input voltage (1.5V) | Vih (1.5V) | 1 | V | 63 | |||
| Maximum low level input voltage (1.5V) | Vil (1.5V) | 0.3 | V | 63 | |||
| Input current | Iin | 0 | 0.5 | µA | Vin=VDD33 or GND | 63 | |
| MDC high pulse width | t1 | 32 | ns | 64 | |||
| MDC low pulse width | t2 | 32 | ns | 64 | |||
| MDC period | t3 | 80 | ns | 64 | |||
| MDIO setup to MDC rising edge | t4 | 10 | ns | 64 | |||
| MDIO hold time from MDC rising edge | t5 | 10 | ns | 64 | |||
| MDIO valid from MDC rising edge | t6 | 0 | 300 | ns | 64 | ||
| Reserved for specific parameter configuration (power sequence) | Rt5 | 100 | ms | 60 | |||
| External I/O pad power ready time after 3.3V ready | Rt6 | 0 | 5 | ms | 60 | ||
| Input high voltage (oscillator) | Vih | 1.4 | V | 63 | |||
| Input low voltage (oscillator) | Vil | 0.4 | V | 63 | |||
| Rise time 10%-90% (oscillator) | 10 | ns | 63 | ||||
| Fall time 10%-90% (oscillator) | 10 | ns | 63 | ||||
| Fref frequency tolerance (crystal) | Fref Tolerance | -50 | 50 | ppm | Ta=0°C~70°C | 62 | |
| Reference clock input duty cycle (crystal) | Fref Duty Cycle | 40 | 60 | % | 62 | ||
| Equivalent series resistance (crystal) | ESR | 50 | Ω | 62 | |||
| Drive level (crystal) | DL | 0.5 | mW | 62 | |||
| Broadband peak-to-peak jitter (crystal) | Jitter | 200 | ps | 62 | |||
| Crystal output high level | Vih_CKXTAL | 1.4 | V | 62 | |||
| Crystal output low level | Vil_CKXTAL | 0.4 | V | 62 |
CAD (KiCad official)
- Symbol:
RTL8211FDI-CG - Footprint:
Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm - 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
rtl8211fdi-cg-etched.step/rtl8211fdi-cg-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rtl8211fdi-cg.step/rtl8211fdi-cg.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Realtek Semicon datasheet (69 pp, sha256
182a9f8c7156012b, retrieved 2026-10-30, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).