← Commit history

Initial commit: component/rtl8201cp-vd-lf

Ray ·6ed35428c7 ·
2 files changed +465
README.mdadded+84
@@ -0,0 +1,84 @@+# RTL8201CP-VD-LF++**Realtek Semicon** · Ethernet Transceivers · LQFP-48(7x7)++RTL8201CP-VD-LF from Realtek Semicon, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | COL | bidirectional | Collision Detect; LI/O latched during power-up/reset to configure LED mode; asserts high when collision detected on media through transformer. |+| 2 | TXEN | input | Transmit Enable; input indicates presence of valid nibble data on TXD[3:0] to PHY for transmission. |+| 3 | TXD3 | input | Transmit Data[3]; MAC sources 4-bit nibble data synchronous with TXC when TXEN asserted. |+| 4 | TXD2 | input | Transmit Data[2]; MAC sources 4-bit nibble data synchronous with TXC when TXEN asserted. |+| 5 | TXD1 | input | Transmit Data[1]; MAC sources 4-bit nibble data synchronous with TXC when TXEN asserted. |+| 6 | TXD0 | input | Transmit Data[0]; MAC sources 4-bit nibble data synchronous with TXC when TXEN asserted. |+| 7 | TXC | output | Transmit Clock; provides continuous clock as timing reference for TXD[3:0] and TXEN at 25MHz (100Mbps) or 2.5MHz (10Mbps). |+| 8 | PWFBIN | input | Power Feedback Input; receives 1.8V output from PWFBOUT through ferrite bead as part of internal voltage conversion circuit. |+| 9 | LED0/PHYAD0 | bidirectional | PHY Address[0] / Link LED; LI/O latched during power-up/reset to configure PHY address; after reset drives Link LED status output. |+| 10 | LED1/PHYAD1 | bidirectional | PHY Address[1] / Full Duplex LED; LI/O latched during power-up/reset to configure PHY address; after reset drives Full Duplex LED status output. |+| 11 | DGND | power_in | Digital Ground; should be connected to larger GND plane for optimal performance. |+| 12 | LED2/PHYAD2 | bidirectional | PHY Address[2] / Activity LED; LI/O latched during power-up/reset to configure PHY address; CP mode: 10-Activity LED blinking on transmit/receive; BL mode: Link 10/Activity. |+| 13 | LED3/PHYAD3 | bidirectional | PHY Address[3] / Activity LED; LI/O latched during power-up/reset to configure PHY address; CP mode: 100-Activity LED blinking on transmit/receive; BL mode: Link 100/Activity. |+| 14 | DVDD33 | power_in | 3.3V Digital Power Input; 3.3V power supply for digital circuit. |+| 15 | LED4/PHYAD4 | bidirectional | PHY Address[4] / Collision LED; LI/O latched during power-up/reset to configure PHY address; after reset drives Collision LED that blinks when collisions occur. |+| 16 | RXC | output | Receive Clock; provides continuous clock reference for RXDV and RXD[0..3] signals at 25MHz (100Mbps) or 2.5MHz (10Mbps). |+| 17 | DGND | power_in | Digital Ground; should be connected to larger GND plane for optimal performance. |+| 18 | RXD3 | output | Receive Data[3]; 4-bit parallel receive data aligned on nibble boundaries driven synchronously to RXC for external MAC unit. |+| 19 | RXD2 | output | Receive Data[2]; 4-bit parallel receive data aligned on nibble boundaries driven synchronously to RXC for external MAC unit. |+| 20 | RXD1 | output | Receive Data[1]; 4-bit parallel receive data aligned on nibble boundaries driven synchronously to RXC for external MAC unit. |+| 21 | RXD0 | output | Receive Data[0]; 4-bit parallel receive data aligned on nibble boundaries driven synchronously to RXC for external MAC unit. |+| 22 | RXDV | output | Receive Data Valid; asserts high when received data present on RXD[3:0]; de-asserts at packet end; valid on rising edge of RXC. |+| 23 | CRS | bidirectional | Carrier Sense; LI/O latched during power-up/reset for mode configuration; asserts high when media not in Idle state. |+| 24 | RXER/FXEN | bidirectional | Receive Error / Fiber/UTP Enable; LI/O latched during power-up/reset to select media mode (1=Fiber mode, 0=UTP mode); after power-on operates as Receive Error output. |+| 25 | MDC | input | Management Data Clock; provides clock synchronous to MDIO for serial management interface; may be asynchronous to TXC/RXC; up to 2.5MHz maximum. |+| 26 | MDIO | bidirectional | Management Data Input/Output; bi-directional signal used to transfer management information via MDC/MDIO serial interface. |+| 27 | NC | unconnected | Not Connected; no connection required or permitted. |+| 28 | RTSET | input | Transmit Bias Resistor Connection; must be pulled to GND by 2KΩ (1%) resistor to define driving current for transmit DAC. |+| 29 | AGND | power_in | Analog Ground; should be connected to larger GND plane for optimal performance. |+| 30 | TPRX- | input | Receive Input (Negative); differential receive input pair shared by 100Base-TX, 100Base-FX and 10Base-T modes; connection through transformer. |+| 31 | TPRX+ | input | Receive Input (Positive); differential receive input pair shared by 100Base-TX, 100Base-FX and 10Base-T modes; connection through transformer. |+| 32 | PWFBOUT | output | Power Feedback Output; 1.8V output from internal voltage regulator; requires 22µF tantalum and 0.1µF capacitor for compensation/de-coupling; connected to PWFBIN through ferrite bead. |+| 33 | TPTX- | output | Transmit Output (Negative); differential transmit output pair; MLT-3 encoded (100Base-TX), pseudo-ECL level (100Base-FX), or Manchester encoded (10Base-T). |+| 34 | TPTX+ | output | Transmit Output (Positive); differential transmit output pair; MLT-3 encoded (100Base-TX), pseudo-ECL level (100Base-FX), or Manchester encoded (10Base-T). |+| 35 | AGND | power_in | Analog Ground; should be connected to larger GND plane for optimal performance. |+| 36 | AVDD33 | power_in | 3.3V Analog Power Input; 3.3V power supply for analog circuit; should be well decoupled. |+| 37 | ANE | input | Auto-Negotiation Enable; LI latched during power-up/reset; pull high (default) to enable auto-negotiation, low to disable and activate parallel detection. |+| 38 | DUPLEX | input | Duplex Mode; LI latched during power-up/reset; pull high for full duplex mode, low for half duplex mode; can be directly connected to GND or VCC. |+| 39 | SPEED | input | Speed Mode; LI latched during power-up/reset; pull high for 100Mbps operation, low for 10Mbps operation; can be directly connected to GND or VCC. |+| 40 | RPTR | input | Repeater Mode; pull high to enable repeater mode (default low for NIC/Switch mode); can be directly connected to GND or VCC. |+| 41 | LDPS | input | Link Down Power Saving; pull high to enable LDPS mode for 60-80% power reduction when link down (default low); can be directly connected to GND or VCC. |+| 42 | RESETB | input | Reset; pull low to reset chip; must be asserted low for minimum 10ms for complete reset; pull high for normal operation. |+| 43 | ISOLATE | input | Isolation; set high to isolate RTL8201CP from MAC and MDC/MDIO interface for minimum power consumption; can be directly connected to GND or VCC. |+| 44 | MII/SNIB | input | MII/SNI Mode Select; LI latched during power-up/reset; pull high (default) for MII mode, low for SNI mode (10Mbps only); can be directly connected to GND or VCC. |+| 45 | DGND | power_in | Digital Ground; should be connected to larger GND plane for optimal performance. |+| 46 | X1 | input | 25MHz Crystal Input; accepts 25MHz crystal input or external 25MHz oscillator output; drives internal PLL. |+| 47 | X2 | output | 25MHz Crystal Output; provides 25MHz crystal output; leave open when external 25MHz oscillator drives X1. |+| 48 | DVDD33 | power_in | 3.3V Digital Power Input; 3.3V power supply for digital circuit. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Realtek Semicon |+| Package | LQFP-48(7x7) |+| Category | Interface |+| Pins | 48 |++## CAD (KiCad official)++- Symbol: `RTL8201CP-VD-LF`+- Footprint: `Package_QFP:LQFP-48_7x7mm_P0.5mm`+- 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)+- 3D model files: `rtl8201cp-vd-lf-etched.step` / `rtl8201cp-vd-lf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rtl8201cp-vd-lf.step` / `rtl8201cp-vd-lf.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Realtek Semicon datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172168845189120) (38 pp, sha256 `fe7b3b45b8e89e51`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/rtl8201cp-vd-lf-datasheet.pdf)
page.jsonadded+381
@@ -0,0 +1,381 @@+{+  "slug": "rtl8201cp-vd-lf",+  "version": "0.1.0",+  "type": "component",+  "description": "Realtek Semicon Ethernet Transceivers, LQFP-48(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "rtl8201cp-vd-lf",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "rtl8201cp-vd-lf.kicad_sym",+    "rtl8201cp-vd-lf.kicad_mod",+    "rtl8201cp-vd-lf.glb",+    "rtl8201cp-vd-lf.step",+    "rtl8201cp-vd-lf.lbr",+    "docs/hero.png",+    "docs/rtl8201cp-vd-lf-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "RTL8201CP-VD-LF",+    "manufacturer": "Realtek Semicon",+    "package": "LQFP-48(7x7)",+    "pin_count": 48,+    "category": "Interface",+    "subcategory": "Ethernet Transceivers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172168845189120",+    "parts": {+      "symbol": "rtl8201cp-vd-lf.kicad_sym",+      "footprint": "rtl8201cp-vd-lf.kicad_mod",+      "model_3d": "rtl8201cp-vd-lf-etched.glb",+      "model_3d_plain": "rtl8201cp-vd-lf.glb",+      "model_3d_step": "rtl8201cp-vd-lf-etched.step",+      "model_3d_step_plain": "rtl8201cp-vd-lf.step",+      "lbr": "rtl8201cp-vd-lf.lbr"+    },+    "distributor_links": {+      "lcsc": "C10018"+    },+    "pins": [+      {+        "number": "1",+        "name": "COL",+        "type": "bidirectional",+        "description": "Collision Detect; LI/O latched during power-up/reset to configure LED mode; asserts high when collision detected on media through transformer."+      },+      {+        "number": "2",+        "name": "TXEN",+        "type": "input",+        "description": "Transmit Enable; input indicates presence of valid nibble data on TXD[3:0] to PHY for transmission."+      },+      {+        "number": "3",+        "name": "TXD3",+        "type": "input",+        "description": "Transmit Data[3]; MAC sources 4-bit nibble data synchronous with TXC when TXEN asserted."+      },+      {+        "number": "4",+        "name": "TXD2",+        "type": "input",+        "description": "Transmit Data[2]; MAC sources 4-bit nibble data synchronous with TXC when TXEN asserted."+      },+      {+        "number": "5",+        "name": "TXD1",+        "type": "input",+        "description": "Transmit Data[1]; MAC sources 4-bit nibble data synchronous with TXC when TXEN asserted."+      },+      {+        "number": "6",+        "name": "TXD0",+        "type": "input",+        "description": "Transmit Data[0]; MAC sources 4-bit nibble data synchronous with TXC when TXEN asserted."+      },+      {+        "number": "7",+        "name": "TXC",+        "type": "output",+        "description": "Transmit Clock; provides continuous clock as timing reference for TXD[3:0] and TXEN at 25MHz (100Mbps) or 2.5MHz (10Mbps)."+      },+      {+        "number": "8",+        "name": "PWFBIN",+        "type": "input",+        "description": "Power Feedback Input; receives 1.8V output from PWFBOUT through ferrite bead as part of internal voltage conversion circuit."+      },+      {+        "number": "9",+        "name": "LED0/PHYAD0",+        "type": "bidirectional",+        "description": "PHY Address[0] / Link LED; LI/O latched during power-up/reset to configure PHY address; after reset drives Link LED status output."+      },+      {+        "number": "10",+        "name": "LED1/PHYAD1",+        "type": "bidirectional",+        "description": "PHY Address[1] / Full Duplex LED; LI/O latched during power-up/reset to configure PHY address; after reset drives Full Duplex LED status output."+      },+      {+        "number": "11",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital Ground; should be connected to larger GND plane for optimal performance."+      },+      {+        "number": "12",+        "name": "LED2/PHYAD2",+        "type": "bidirectional",+        "description": "PHY Address[2] / Activity LED; LI/O latched during power-up/reset to configure PHY address; CP mode: 10-Activity LED blinking on transmit/receive; BL mode: Link 10/Activity."+      },+      {+        "number": "13",+        "name": "LED3/PHYAD3",+        "type": "bidirectional",+        "description": "PHY Address[3] / Activity LED; LI/O latched during power-up/reset to configure PHY address; CP mode: 100-Activity LED blinking on transmit/receive; BL mode: Link 100/Activity."+      },+      {+        "number": "14",+        "name": "DVDD33",+        "type": "power_in",+        "description": "3.3V Digital Power Input; 3.3V power supply for digital circuit."+      },+      {+        "number": "15",+        "name": "LED4/PHYAD4",+        "type": "bidirectional",+        "description": "PHY Address[4] / Collision LED; LI/O latched during power-up/reset to configure PHY address; after reset drives Collision LED that blinks when collisions occur."+      },+      {+        "number": "16",+        "name": "RXC",+        "type": "output",+        "description": "Receive Clock; provides continuous clock reference for RXDV and RXD[0..3] signals at 25MHz (100Mbps) or 2.5MHz (10Mbps)."+      },+      {+        "number": "17",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital Ground; should be connected to larger GND plane for optimal performance."+      },+      {+        "number": "18",+        "name": "RXD3",+        "type": "output",+        "description": "Receive Data[3]; 4-bit parallel receive data aligned on nibble boundaries driven synchronously to RXC for external MAC unit."+      },+      {+        "number": "19",+        "name": "RXD2",+        "type": "output",+        "description": "Receive Data[2]; 4-bit parallel receive data aligned on nibble boundaries driven synchronously to RXC for external MAC unit."+      },+      {+        "number": "20",+        "name": "RXD1",+        "type": "output",+        "description": "Receive Data[1]; 4-bit parallel receive data aligned on nibble boundaries driven synchronously to RXC for external MAC unit."+      },+      {+        "number": "21",+        "name": "RXD0",+        "type": "output",+        "description": "Receive Data[0]; 4-bit parallel receive data aligned on nibble boundaries driven synchronously to RXC for external MAC unit."+      },+      {+        "number": "22",+        "name": "RXDV",+        "type": "output",+        "description": "Receive Data Valid; asserts high when received data present on RXD[3:0]; de-asserts at packet end; valid on rising edge of RXC."+      },+      {+        "number": "23",+        "name": "CRS",+        "type": "bidirectional",+        "description": "Carrier Sense; LI/O latched during power-up/reset for mode configuration; asserts high when media not in Idle state."+      },+      {+        "number": "24",+        "name": "RXER/FXEN",+        "type": "bidirectional",+        "description": "Receive Error / Fiber/UTP Enable; LI/O latched during power-up/reset to select media mode (1=Fiber mode, 0=UTP mode); after power-on operates as Receive Error output."+      },+      {+        "number": "25",+        "name": "MDC",+        "type": "input",+        "description": "Management Data Clock; provides clock synchronous to MDIO for serial management interface; may be asynchronous to TXC/RXC; up to 2.5MHz maximum."+      },+      {+        "number": "26",+        "name": "MDIO",+        "type": "bidirectional",+        "description": "Management Data Input/Output; bi-directional signal used to transfer management information via MDC/MDIO serial interface."+      },+      {+        "number": "27",+        "name": "NC",+        "type": "unconnected",+        "description": "Not Connected; no connection required or permitted."+      },+      {+        "number": "28",+        "name": "RTSET",+        "type": "input",+        "description": "Transmit Bias Resistor Connection; must be pulled to GND by 2KΩ (1%) resistor to define driving current for transmit DAC."+      },+      {+        "number": "29",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog Ground; should be connected to larger GND plane for optimal performance."+      },+      {+        "number": "30",+        "name": "TPRX-",+        "type": "input",+        "description": "Receive Input (Negative); differential receive input pair shared by 100Base-TX, 100Base-FX and 10Base-T modes; connection through transformer."+      },+      {+        "number": "31",+        "name": "TPRX+",+        "type": "input",+        "description": "Receive Input (Positive); differential receive input pair shared by 100Base-TX, 100Base-FX and 10Base-T modes; connection through transformer."+      },+      {+        "number": "32",+        "name": "PWFBOUT",+        "type": "output",+        "description": "Power Feedback Output; 1.8V output from internal voltage regulator; requires 22µF tantalum and 0.1µF capacitor for compensation/de-coupling; connected to PWFBIN through ferrite bead."+      },+      {+        "number": "33",+        "name": "TPTX-",+        "type": "output",+        "description": "Transmit Output (Negative); differential transmit output pair; MLT-3 encoded (100Base-TX), pseudo-ECL level (100Base-FX), or Manchester encoded (10Base-T)."+      },+      {+        "number": "34",+        "name": "TPTX+",+        "type": "output",+        "description": "Transmit Output (Positive); differential transmit output pair; MLT-3 encoded (100Base-TX), pseudo-ECL level (100Base-FX), or Manchester encoded (10Base-T)."+      },+      {+        "number": "35",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog Ground; should be connected to larger GND plane for optimal performance."+      },+      {+        "number": "36",+        "name": "AVDD33",+        "type": "power_in",+        "description": "3.3V Analog Power Input; 3.3V power supply for analog circuit; should be well decoupled."+      },+      {+        "number": "37",+        "name": "ANE",+        "type": "input",+        "description": "Auto-Negotiation Enable; LI latched during power-up/reset; pull high (default) to enable auto-negotiation, low to disable and activate parallel detection."+      },+      {+        "number": "38",+        "name": "DUPLEX",+        "type": "input",+        "description": "Duplex Mode; LI latched during power-up/reset; pull high for full duplex mode, low for half duplex mode; can be directly connected to GND or VCC."+      },+      {+        "number": "39",+        "name": "SPEED",+        "type": "input",+        "description": "Speed Mode; LI latched during power-up/reset; pull high for 100Mbps operation, low for 10Mbps operation; can be directly connected to GND or VCC."+      },+      {+        "number": "40",+        "name": "RPTR",+        "type": "input",+        "description": "Repeater Mode; pull high to enable repeater mode (default low for NIC/Switch mode); can be directly connected to GND or VCC."+      },+      {+        "number": "41",+        "name": "LDPS",+        "type": "input",+        "description": "Link Down Power Saving; pull high to enable LDPS mode for 60-80% power reduction when link down (default low); can be directly connected to GND or VCC."+      },+      {+        "number": "42",+        "name": "RESETB",+        "type": "input",+        "description": "Reset; pull low to reset chip; must be asserted low for minimum 10ms for complete reset; pull high for normal operation."+      },+      {+        "number": "43",+        "name": "ISOLATE",+        "type": "input",+        "description": "Isolation; set high to isolate RTL8201CP from MAC and MDC/MDIO interface for minimum power consumption; can be directly connected to GND or VCC."+      },+      {+        "number": "44",+        "name": "MII/SNIB",+        "type": "input",+        "description": "MII/SNI Mode Select; LI latched during power-up/reset; pull high (default) for MII mode, low for SNI mode (10Mbps only); can be directly connected to GND or VCC."+      },+      {+        "number": "45",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital Ground; should be connected to larger GND plane for optimal performance."+      },+      {+        "number": "46",+        "name": "X1",+        "type": "input",+        "description": "25MHz Crystal Input; accepts 25MHz crystal input or external 25MHz oscillator output; drives internal PLL."+      },+      {+        "number": "47",+        "name": "X2",+        "type": "output",+        "description": "25MHz Crystal Output; provides 25MHz crystal output; leave open when external 25MHz oscillator drives X1."+      },+      {+        "number": "48",+        "name": "DVDD33",+        "type": "power_in",+        "description": "3.3V Digital Power Input; 3.3V power supply for digital circuit."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 38,+        "cost_usd": 0.5678,+        "at": "2026-09-21T22:02:06"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586172168845189120",+        "pages": 38,+        "sha256": "fe7b3b45b8e89e51",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 48,+        "described": 48,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file