main
Ray
rtl8153b-vb-cg: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
9e129fc
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392
{
"schema_version": 1,
"type": "component",
"slug": "rtl8153b-vb-cg",
"title": "RTL8153B-VB-CG",
"brief": "Realtek Semicon Ethernet Controllers, QFN-40-EP(5x5). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
"version": "0.2.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"interface",
"rtl8153b-vb-cg"
],
"component": {
"mpn": "RTL8153B-VB-CG",
"manufacturer": "Realtek Semicon",
"package": "QFN-40-EP(5x5)",
"pin_count": 41,
"category": "Interface",
"subcategory": "Ethernet Controllers",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/1414a638ec61e4d403fce56e2a47830a.pdf",
"parts": {
"symbol": "rtl8153b-vb-cg.kicad_sym",
"footprint": "rtl8153b-vb-cg.kicad_mod",
"model_3d": "rtl8153b-vb-cg-etched.glb",
"model_3d_plain": "rtl8153b-vb-cg.glb",
"model_3d_step": "rtl8153b-vb-cg-etched.step",
"model_3d_step_plain": "rtl8153b-vb-cg.step",
"lbr": "rtl8153b-vb-cg.lbr"
},
"distributor_links": {},
"pins": [
{
"number": "1",
"name": "MDIP0",
"type": "bidirectional",
"description": "Ethernet MDI pair 0 positive. In MDI mode, BI_DA+ (first pair) in 1000Base-T; TX+ in 10/100Base-T. Route as controlled-Z differential to magnetics."
},
{
"number": "2",
"name": "MDIN0",
"type": "bidirectional",
"description": "Ethernet MDI pair 0 negative. BI_DA- in 1000Base-T; TX- in 10/100Base-T. In MDI-X crossover mode acts as BI_DB- (RX-)."
},
{
"number": "3",
"name": "AVDD10",
"type": "power_in",
"description": "Analog 1.0V power supply (PHY analog rail). Decouple locally; supplied from internal or external 1.0V regulator."
},
{
"number": "4",
"name": "MDIP1",
"type": "bidirectional",
"description": "Ethernet MDI pair 1 positive. In MDI mode, BI_DB+ (second pair, RX+ in 10/100Base-T). In MDI-X acts as BI_DA+ (TX+)."
},
{
"number": "5",
"name": "MDIN1",
"type": "bidirectional",
"description": "Ethernet MDI pair 1 negative. BI_DB- in MDI (RX- in 10/100Base-T); BI_DA- in MDI-X."
},
{
"number": "6",
"name": "MDIP2",
"type": "bidirectional",
"description": "Ethernet MDI pair 2 positive. BI_DC+ (third pair in 1000Base-T). Unused in 10/100Base-T."
},
{
"number": "7",
"name": "MDIN2",
"type": "bidirectional",
"description": "Ethernet MDI pair 2 negative. BI_DC- (BI_DD- in MDI-X crossover)."
},
{
"number": "8",
"name": "AVDD10",
"type": "power_in",
"description": "Analog 1.0V power supply (PHY analog rail). Second AVDD10 pin - decouple locally."
},
{
"number": "9",
"name": "MDIP3",
"type": "bidirectional",
"description": "Ethernet MDI pair 3 positive. BI_DD+ (fourth pair in 1000Base-T)."
},
{
"number": "10",
"name": "MDIN3",
"type": "bidirectional",
"description": "Ethernet MDI pair 3 negative. BI_DD- (BI_DC- in MDI-X crossover)."
},
{
"number": "11",
"name": "AVDD33",
"type": "power_in",
"description": "Analog 3.3V power supply. Bulk + local decoupling; internal LDO on AVDD33 rail feeds analog blocks."
},
{
"number": "12",
"name": "U3SSTXN",
"type": "output",
"description": "USB 3.0 SuperSpeed transmit differential pair, negative. AC-couple with 75-200nF caps to the USB connector; route as 90Ω differential."
},
{
"number": "13",
"name": "U3SSTXP",
"type": "output",
"description": "USB 3.0 SuperSpeed transmit differential pair, positive. AC-coupled; 90Ω differential."
},
{
"number": "14",
"name": "U3VDD10",
"type": "power_in",
"description": "USB 3.0 (SuperSpeed) 1.0V power supply. Decouple locally to GND."
},
{
"number": "15",
"name": "U3SSRXN",
"type": "input",
"description": "USB 3.0 SuperSpeed receive differential pair, negative. 90Ω differential from connector; host end AC-couples."
},
{
"number": "16",
"name": "U3SSRXP",
"type": "input",
"description": "USB 3.0 SuperSpeed receive differential pair, positive. 90Ω differential."
},
{
"number": "17",
"name": "U2DM",
"type": "bidirectional",
"description": "USB 2.0/1.1 D- data line. 90Ω differential with U2DP; series ESD/EMI protection recommended at the connector."
},
{
"number": "18",
"name": "U2DP",
"type": "bidirectional",
"description": "USB 2.0/1.1 D+ data line. 90Ω differential with U2DM."
},
{
"number": "19",
"name": "U2VDD10",
"type": "power_in",
"description": "USB 2.0/1.1 1.0V power supply. Decouple locally."
},
{
"number": "20",
"name": "AVDD33",
"type": "power_in",
"description": "Analog 3.3V power supply / internal LDO 3.3V output node. Datasheet: 'embedded LDO is for RTL8153B-VB internal use only; do not power other devices.'"
},
{
"number": "21",
"name": "VDD5",
"type": "power_in",
"description": "Analog 5.0V power supply. Sourced from USB VBUS (typ 5V)."
},
{
"number": "22",
"name": "DVDD10_UPS",
"type": "power_out",
"description": "Digital 1.0V uninterruptible power supply / LDO 1.0V output. Feeds always-on digital domain for wake logic. Do not use to power other devices."
},
{
"number": "23",
"name": "DVDD33",
"type": "power_in",
"description": "Digital 3.3V power supply. Bulk + local decoupling."
},
{
"number": "24",
"name": "EEDO/LED2/SPISDO/LANWAKEB/GPIO",
"type": "bidirectional",
"description": "Shared multi-function pin: EEPROM data-in (EEDO, from EEPROM SDO), LED2 output, SPI flash SDO input, LANWAKEB power-management event (open-drain, active low), or general-purpose I/O. Mode chosen by autoload (eFUSE)."
},
{
"number": "25",
"name": "EEDI/SPISDI/ENSWREG",
"type": "bidirectional",
"description": "Shared pin: EEPROM data-out to EEPROM SDI (EEDI), SPI flash serial-data-input driver (SPISDI), and power-on latch ENSWREG (3.3V=enable switching regulator, 0V=LDO or external 1.0V). Latch sampled at power-on."
},
{
"number": "26",
"name": "VDDREG33",
"type": "power_in",
"description": "Digital 3.3V supply for the internal switching/LDO regulator."
},
{
"number": "27",
"name": "VDDREG5",
"type": "power_in",
"description": "Digital 5V supply for the internal switching/LDO regulator (from USB VBUS)."
},
{
"number": "28",
"name": "REGOUT",
"type": "power_out",
"description": "Switching/LDO regulator 1.0V output. Feeds internal 1.0V rails via external inductor/cap network. Internal-use only per datasheet."
},
{
"number": "29",
"name": "GND",
"type": "power_in",
"description": "Switching/LDO regulator ground return."
},
{
"number": "30",
"name": "EESK/LED1/SPISCK",
"type": "output",
"description": "Shared pin: EEPROM serial clock (93C46/56/66), LED1 output (default), or SPI flash serial clock. Mode chosen by autoload."
},
{
"number": "31",
"name": "EECS",
"type": "output",
"description": "EEPROM chip select (93C46/56/66). Active only when EEPROM mode is selected by autoload."
},
{
"number": "32",
"name": "LED0/SPICSB",
"type": "output",
"description": "Shared pin: LED0 output (default) or SPI flash chip select (active low). Mode chosen by autoload."
},
{
"number": "33",
"name": "DVDD33",
"type": "power_in",
"description": "Digital 3.3V power supply. Second DVDD33 pin - decouple locally."
},
{
"number": "34",
"name": "DVDD10",
"type": "power_in",
"description": "Digital 1.0V power supply (core). Fed from REGOUT or external 1.0V source."
},
{
"number": "35",
"name": "CKXTAL1",
"type": "input",
"description": "Clock reference input. Connect to 25MHz crystal (Y1) with load caps; connect to GND if an external clock source drives CKXTAL2 instead."
},
{
"number": "36",
"name": "CKXTAL2",
"type": "bidirectional",
"description": "Clock reference output when using a crystal, or external clock input (25MHz/48MHz oscillator)."
},
{
"number": "37",
"name": "AVDD10",
"type": "power_in",
"description": "Analog 1.0V power supply. Third AVDD10 pin - decouple locally."
},
{
"number": "38",
"name": "RSET",
"type": "input",
"description": "External bias resistor reference. Connect a precision resistor to GND to set the internal current bias for the PHY."
},
{
"number": "39",
"name": "AVDD33",
"type": "power_in",
"description": "Analog 3.3V power supply. Decouple locally."
},
{
"number": "40",
"name": "AVDD33",
"type": "power_in",
"description": "Analog 3.3V power supply. Decouple locally."
},
{
"number": "41",
"name": "GND",
"type": "power_in",
"description": "Ground - exposed thermal pad on QFN underside. Must be soldered to a solid GND copper pour with thermal vias for both electrical return and heat sinking."
}
],
"provenance": {
"extractor": "ds2sf",
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/1414a638ec61e4d403fce56e2a47830a.pdf",
"pages": 34,
"sha256": "c598af5b177c86c1",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 41,
"described": 41,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "rtl8153b-vb-cg.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5,
5,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "8f37bc7a9aab4742c34f137d9822c0352acc227532830034555744338483cdfc",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "rtl8153b-vb-cg-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
5,
5,
0.77
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "77d03e751457a1a5d5f28e688160d1809bc9c26036edf8d564ccc0ed81b49c31",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Realtek Semicon",
"Package": "QFN-40-EP(5x5)",
"Category": "Interface",
"Pins": "41"
}
},
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"rtl8153b-vb-cg"
],
"discovery_pitch": "RTL8153B-VB-CG (Realtek Semicon) component page with datasheet-verified CAD.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"rtl8153b-vb-cg.kicad_sym",
"rtl8153b-vb-cg.kicad_mod",
"rtl8153b-vb-cg.glb",
"rtl8153b-vb-cg.step",
"rtl8153b-vb-cg-etched.step",
"rtl8153b-vb-cg.lbr",
"docs/hero.png",
"docs/rtl8153b-vb-cg-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html"
],
"visibility": {
"public": true
},
"variants": [
{
"mpn": "RTL8153B-VB-CG",
"kind": "packaging"
}
],
"updated_at": "2026-09-25T05:21:56.949Z"
}