main
Ray
rt9742agj5f: laser-etched CAD + chip hero (factory 2.0.0 backfill)
2a63742
RT9742AGJ5F
Richtek Tech · AC-DC Controllers and Regulators · TSOT-23-5
RT9742AGJ5F from Richtek Tech, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Switched power output to the load (e.g. USB VBUS). Sourced from VIN through the internal N-MOSFET high-side switch (RDS(ON) ~55 mΩ typ.). Rated up to 3A; includes an internal auto-discharge path to GND when the switch is disabled. |
| 2 | GND | power_in | Device ground reference for all internal circuitry and the source of the auto-discharge FET. |
| 3 | FLG | output | Active-low, open-drain fault FLAG output. Pulls low approximately 10 ms after an over-current or over-temperature (thermal shutdown) event to signal a fault to the host USB controller. Requires an external pull-up resistor. Absolute max 7V. |
| 4 | EN | input | Chip enable input. For the RT9742A option this pin is active-high: drive high to turn the power switch on, low to disable it (VOUT auto-discharges). Input range 0V to 6V; absolute max -0.3V to 7V. |
| 5 | VIN | power_in | Power input voltage, 2.7V to 6V recommended (7V absolute max). Feeds the internal N-MOSFET high-side switch and internal bias/charge pump. Decouple with a local input capacitor (CIN, e.g. 10 uF). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | TSOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
RT9742AGJ5FRT9742AGJ5FBGJ5FRT9742AGJ5FANGJ5FRT9742AGJ5FBNGJ5FRT9742AGJ5FCGJ5FRT9742AGJ5FDGJ5FRT9742AGJ5FCNGJ5FRT9742AGJ5FDNGJ5FRT9742AGJ5FEGJ5FRT9742AGJ5FFGJ5FRT9742AGJ5FENGJ5FRT9742AGJ5FFNGJ5FRT9742AGJ5FGGJ5FRT9742AGJ5FHGJ5FRT9742AGJ5FGNGJ5FRT9742AGJ5FHNGJ5FRT9742AGJ5FNGJ5FRT9742AGJ5FPGJ5FRT9742AGJ5FNNGJ5FRT9742AGJ5FPNGJ5FRT9742AGJ5FCGJ5RT9742AGJ5FDGJ5RT9742AGJ5FCNGJ5RT9742AGJ5FDNGJ5RT9742AGJ5FEGJ5RT9742AGJ5FFGJ5RT9742AGJ5FENGJ5RT9742AGJ5FFNGJ5RT9742AGJ5FGGJ5RT9742AGJ5FHGJ5RT9742AGJ5FGNGJ5RT9742AGJ5FHNGJ5RT9742AGJ5FMGJ5RT9742AGJ5FMNGJ5RT9742AGJ5FNGJ5RT9742AGJ5FQGJ5RT9742AGJ5FRGJ5RT9742AGJ5FQNGJ5RT9742AGJ5FRNGJ5RT9742AGJ5FUNGJ5RT9742AGJ5FJNGVRT9742AGJ5FKNGVRT9742AGJ5FLNGVRT9742AGJ5FSNGV
CAD (KiCad official)
- Symbol:
RT9742AGJ5F - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
rt9742agj5f-etched.step/rt9742agj5f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt9742agj5f.step/rt9742agj5f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (18 pp, sha256
5f2efe133f299f2b, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# RT9742AGJ5F
**Richtek Tech** · AC-DC Controllers and Regulators · TSOT-23-5
RT9742AGJ5F from Richtek Tech, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Switched power output to the load (e.g. USB VBUS). Sourced from VIN through the internal N-MOSFET high-side switch (RDS(ON) ~55 mΩ typ.). Rated up to 3A; includes an internal auto-discharge path to GND when the switch is disabled. |
| 2 | GND | power_in | Device ground reference for all internal circuitry and the source of the auto-discharge FET. |
| 3 | FLG | output | Active-low, open-drain fault FLAG output. Pulls low approximately 10 ms after an over-current or over-temperature (thermal shutdown) event to signal a fault to the host USB controller. Requires an external pull-up resistor. Absolute max 7V. |
| 4 | EN | input | Chip enable input. For the RT9742A option this pin is active-high: drive high to turn the power switch on, low to disable it (VOUT auto-discharges). Input range 0V to 6V; absolute max -0.3V to 7V. |
| 5 | VIN | power_in | Power input voltage, 2.7V to 6V recommended (7V absolute max). Feeds the internal N-MOSFET high-side switch and internal bias/charge pump. Decouple with a local input capacitor (CIN, e.g. 10 uF). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | TSOT-23-5 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `RT9742AGJ5F`
- `RT9742AGJ5FBGJ5F`
- `RT9742AGJ5FANGJ5F`
- `RT9742AGJ5FBNGJ5F`
- `RT9742AGJ5FCGJ5F`
- `RT9742AGJ5FDGJ5F`
- `RT9742AGJ5FCNGJ5F`
- `RT9742AGJ5FDNGJ5F`
- `RT9742AGJ5FEGJ5F`
- `RT9742AGJ5FFGJ5F`
- `RT9742AGJ5FENGJ5F`
- `RT9742AGJ5FFNGJ5F`
- `RT9742AGJ5FGGJ5F`
- `RT9742AGJ5FHGJ5F`
- `RT9742AGJ5FGNGJ5F`
- `RT9742AGJ5FHNGJ5F`
- `RT9742AGJ5FNGJ5F`
- `RT9742AGJ5FPGJ5F`
- `RT9742AGJ5FNNGJ5F`
- `RT9742AGJ5FPNGJ5F`
- `RT9742AGJ5FCGJ5`
- `RT9742AGJ5FDGJ5`
- `RT9742AGJ5FCNGJ5`
- `RT9742AGJ5FDNGJ5`
- `RT9742AGJ5FEGJ5`
- `RT9742AGJ5FFGJ5`
- `RT9742AGJ5FENGJ5`
- `RT9742AGJ5FFNGJ5`
- `RT9742AGJ5FGGJ5`
- `RT9742AGJ5FHGJ5`
- `RT9742AGJ5FGNGJ5`
- `RT9742AGJ5FHNGJ5`
- `RT9742AGJ5FMGJ5`
- `RT9742AGJ5FMNGJ5`
- `RT9742AGJ5FNGJ5`
- `RT9742AGJ5FQGJ5`
- `RT9742AGJ5FRGJ5`
- `RT9742AGJ5FQNGJ5`
- `RT9742AGJ5FRNGJ5`
- `RT9742AGJ5FUNGJ5`
- `RT9742AGJ5FJNGV`
- `RT9742AGJ5FKNGV`
- `RT9742AGJ5FLNGV`
- `RT9742AGJ5FSNGV`
## CAD (KiCad official)
- Symbol: `RT9742AGJ5F`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `rt9742agj5f-etched.step` / `rt9742agj5f-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rt9742agj5f.step` / `rt9742agj5f.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Richtek Tech datasheet](docs/rt9742agj5f-datasheet.pdf) (18 pp, sha256 `5f2efe133f299f2b`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/rt9742agj5f-datasheet.pdf)