component
RT9300AGE
Public Made by Adomby adom
Richtek Tech LED Drivers, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRT9300AGE
Richtek Tech · LED Drivers · SOT-23-6
RT9300AGE from Richtek Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Chip Enable (active high) that also powers the IC over its 2.5V to 5.5V supply range; driving it low forces LED1 to LED4 into high impedance, and it must be pulled low (below 0.7V) to disable the device. |
| 2 | GND | power_in | Ground reference for the device and the LED current sinks. |
| 3 | LED4 | output | LED4 cathode connection that sinks a constant current of 20mA (RT9300A) or 15mA (RT9300B) and is high impedance when EN is low. |
| 4 | LED3 | output | LED3 cathode connection that sinks a constant current of 20mA (RT9300A) or 15mA (RT9300B) and is high impedance when EN is low. |
| 5 | LED2 | output | LED2 cathode connection that sinks a constant current of 20mA (RT9300A) or 15mA (RT9300B) and is high impedance when EN is low. |
| 6 | LED1 | output | LED1 cathode connection that sinks a constant current of 20mA (RT9300A) or 15mA (RT9300B) and is high impedance when EN is low. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | SOT-23-6 |
| Category | LED Drivers |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| LED Sink Current (RT9300A, 20mA variant) | 18 | 20 | 22 | mA | 3 | ||
| EN High-Level Input Voltage | VEN_H | 2.5 | V | 3 | |||
| EN Low-Level Input Voltage | VEN_L | 0.7 | V | 3 | |||
| Operation Voltage Range | VEN | 2.5 | 5.5 | V | 3 | ||
| Quiescent Current | IEN | 600 | uA | ILED = 0 | 3 | ||
| LED Current Deviation Matching | 5 | % | 3 | ||||
| Shutdown Current | ISHDN | 1 | uA | VEN < 0.4V | 3 | ||
| Supply Input Voltage | VIN | -0.3 | 6 | V | 3 | ||
| Other pins voltage | -0.3 | 6 | V | 3 | |||
| Power Dissipation, PD @ TA = 25°C (SOT-23-6) | PD | 0.4 | W | TA = 25°C, SOT-23-6 | 3 | ||
| Lead Temperature (Soldering, 10 sec.) | 260 | °C | Soldering, 10 sec. | 3 | |||
| Operation Temperature Range | -40 | 85 | °C | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| ESD Susceptibility HBM | 2 | kV | HBM (Human Body Mode) | 3 | |||
| ESD Susceptibility MM | 200 | V | MM (Machine Mode) | 3 | |||
| Junction Temperature Range | -40 | 125 | °C | 3 | |||
| Ambient Temperature Range | -40 | 85 | °C | 3 | |||
| Package Thermal Resistance, junction to ambient (SOT-23-6) | θJA | 250 | °C/W | SOT-23-6, JEDEC 51-3 single layer test board | 3 |
CAD (KiCad official)
- Symbol:
RT9300AGE - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
rt9300age-etched.step/rt9300age-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt9300age.step/rt9300age.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (9 pp, sha256
61b762a2814dfbf0, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).