3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRT9285BGJ6
Richtek Tech · LED Drivers · SOT-23-6
RT9285BGJ6 from Richtek Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LX | passive | Switch node that connects to the inductor; minimize the track area to reduce EMI, rated -0.3V to 22V. |
| 2 | GND | power_in | Ground pin; the VDD bypass capacitor and the output capacitor return here, and the layout calls for many large thermal vias. |
| 3 | FB | input | Feedback pin where a series resistor RSET to ground senses the WLED current, with a 0.25V reference (0.237V to 0.263V). |
| 4 | EN | input | Active-high chip enable with an internal pull-down of about 300kΩ, logic low max 0.4V and logic high min 1.4V, also used for dimming. |
| 5 | VOUT | passive | Output voltage pin that internally connects to the OVP diode to limit output voltage (about 20V OVP) when LEDs are disconnected. |
| 6 | VDD | power_in | Supply input voltage of 2.7V to 5.5V; bypass with a 1μF capacitor to GND to reduce input ripple. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | SOT-23-6 |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operation voltage Range | VIN | 2.7 | 5.5 | V | 5 | ||
| Under Voltage Lock Out | VUVLO | 1.7 | 2 | 2.3 | V | 5 | |
| Quiescent Current | IQ | 300 | 450 | μA | FB = 1.5V, No switch | 5 | |
| Supply Current | IIN | 2 | mA | FB = 0V, Switch | 5 | ||
| Shut Down Current | ISHDN | 2 | 5 | μA | VEN < 0.4V | 5 | |
| Line Regulation | 3 | % | VIN = 3V to 4.3V | 5 | |||
| Maximum Duty Cycle | 85 | 90 | % | 5 | |||
| Feedback Reference Voltage | VREF | 0.237 | 0.25 | 0.263 | V | 5 | |
| On Resistance of MOSFET | RDS(ON) | 0.5 | 0.75 | 1 | Ω | 5 | |
| EN Threshold Logic-Low | VIL | 0.4 | V | 6 | |||
| EN Threshold Logic-High | VIH | 1.4 | V | 6 | |||
| Operation Frequency | fOSC | 1 | MHz | 5 | |||
| Diode Forward Voltage | VFW | 0.9 | V | IFW = 100mA | 5 | ||
| OVP Threshold | VOVP | 20 | V | 5 | |||
| OCP | 400 | mA | 5 | ||||
| Operation Junction Temperature Range | TJ | -40 | 125 | °C | 5 | ||
| Operation Ambient Temperature Range | TA | -40 | 85 | °C | 5 | ||
| Supply Voltage | VIN | -0.3 | 6 | V | 5 | ||
| LX Input Voltage | -0.3 | 22 | V | 5 | |||
| Output Voltage | -0.3 | 21 | V | 5 | |||
| The other pins | -0.3 | 6 | V | 5 | |||
| Power Dissipation TSOT23-6 | PD | 0.455 | W | TA = 25°C | 5 | ||
| Junction Temperature | TJ | 150 | °C | 5 | |||
| Lead Temperature | 260 | °C | Soldering, 10 sec. | 5 | |||
| Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Package Thermal Resistance TSOT23-6 | θJA | 220 | °C/W | JEDEC 51-3 single-layer board, TA = 25°C | 5 |
CAD (KiCad official)
- Symbol:
RT9285BGJ6 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
rt9285bgj6-etched.step/rt9285bgj6-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt9285bgj6.step/rt9285bgj6.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (13 pp, sha256
1b23c90093e66f5d, retrieved 2026-10-23, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).