← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Power input voltage. Recommended operating range 2.5V to 5.5V (absolute max 6V). Bypass with 1\u00b5F X7R ceramic to GND close to the pin."+ "description": "Power input voltage. Recommended operating range 2.5V to 5.5V (absolute max 6V). Bypass with 1µF X7R ceramic to GND close to the pin." }, { "number": "2",@@ -44,19 +44,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Chip Enable, active-high TTL-logic input (VIH \u2265 1.2V, VIL \u2264 0.4V, 0-5.5V range). High-impedance pin (IBSD \u2264 100nA); tie through a 100k\u03a9 pull-down to GND if the drive signal can float. Drive to GND for <0.01\u00b5A shutdown."+ "description": "Chip Enable, active-high TTL-logic input (VIH ≥ 1.2V, VIL ≤ 0.4V, 0-5.5V range). High-impedance pin (IBSD ≤ 100nA); tie through a 100kΩ pull-down to GND if the drive signal can float. Drive to GND for <0.01µA shutdown." }, { "number": "4", "name": "BP", "type": "passive",- "description": "Reference noise bypass. Connect a 22nF ceramic capacitor between BP and GND for lowest output noise (typ 100\u00b5VRMS, 10Hz-100kHz). May be left floating if noise performance is not critical."+ "description": "Reference noise bypass. Connect a 22nF ceramic capacitor between BP and GND for lowest output noise (typ 100µVRMS, 10Hz-100kHz). May be left floating if noise performance is not critical." }, { "number": "5", "name": "VOUT", "type": "power_out",- "description": "Regulated output voltage (3.0V for the -30 option). Delivers up to 300mA with 220mV dropout at 300mA. Requires only 1\u00b5F X7R ceramic to GND for stability; low-ESR ceramic capacitors are supported."+ "description": "Regulated output voltage (3.0V for the -30 option). Delivers up to 300mA with 220mV dropout at 300mA. Requires only 1µF X7R ceramic to GND for stability; low-ESR ceramic capacitors are supported." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/rt9193-30gb-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }