component

RT9193-25GB

Public Made by Adom

by adom

Richtek Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentpower management (pmic)rt9193-25gbfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray 1h ago
viewers rt9193-25gb: viewers · Ray 1h ago
package.json Publish 0.1.0 · Ray 1h ago
page.json Set visibility: public · Ray 1h ago
README.md Publish 0.1.0 · Ray 1h ago
rt9193-25gb-etched.glb Publish 0.1.0 · Ray 1h ago
rt9193-25gb-etched.step rt9193-25gb: factory component page (tier=lcsc) · Ray 1h ago
rt9193-25gb-hero.glb rt9193-25gb: hero GLB from the etched model (keeps the MPN mark) · Ray 1h ago
rt9193-25gb-hero.overlay.json Publish 0.1.0 · Ray 1h ago
rt9193-25gb.glb Publish 0.1.0 · Ray 1h ago
rt9193-25gb.kicad_mod Publish 0.1.0 · Ray 1h ago
rt9193-25gb.kicad_sym Publish 0.1.0 · Ray 1h ago
rt9193-25gb.lbr Publish 0.1.0 · Ray 1h ago
rt9193-25gb.step Publish 0.1.0 · Ray 1h ago

RT9193-25GB

Richtek Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5

RT9193-25GB from Richtek Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Power input voltage, recommended operating range 2.5V to 5.5V (absolute maximum 6V), with the input capacitor placed within 0.5 inch of the pin.
2 GND power_in Ground.
3 EN input Chip enable, active high (above 1.2V on, below 0.4V shutdown); the pin is high impedance, so use a 100kΩ pull-down to GND if the control signal floats, or tie to VIN if unused.
4 BP passive Reference noise bypass; may be left floating, but for lowest noise connect a 22nF capacitor between BP and GND.
5 VOUT power_out Regulated output voltage (2.5V for the -25 option), up to 300mA, requiring at least a 1µF output capacitor for stability.

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package SOT-23-5
Category Power Management (PMIC)
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy ΔVOUT -2 2 % IOUT = 1mA 3
Current Limit ILIM 360 400 mA RLOAD = 1Ω 3
Quiescent Current IQ 90 130 μA VEN ≥ 1.2V, IOUT = 0mA 3
Dropout Voltage VDROP 170 200 mV IOUT = 200mA, VOUT > 2.8V 3
Dropout Voltage VDROP 220 300 mV IOUT = 300mA, VOUT > 2.8V 3
Line Regulation ΔVLINE 0.3 % VIN = (VOUT + 1V) to 5.5V, IOUT = 1mA 3
Load Regulation ΔVLOAD 0.6 % 1mA < IOUT < 300mA 3
Standby Current ISTBY 0.01 1 μA VEN = GND, Shutdown 3
EN Input Bias Current IIBSD 0 100 nA VEN = GND or VIN 4
EN Threshold Logic-Low Voltage VIL 0.4 V VIN = 3V to 5.5V, Shutdown 4
EN Threshold Logic-High Voltage VIH 1.2 V VIN = 3V to 5.5V, Start-Up 4
Supply Input Voltage (recommended) 2.5 5.5 V 3
EN Input Voltage (recommended) 0 5.5 V 3
Junction Temperature Range (recommended) TJ -40 125 °C 3
Ambient Temperature Range (recommended) TA -40 85 °C 3
Supply Input Voltage (absolute maximum) 6 V 3
Power Dissipation SOT-23-5 PD 400 mW TA = 25°C 3
Junction Temperature (absolute maximum) TJ 150 °C 3
Lead Temperature (soldering, 10 sec) 260 °C Soldering, 10 sec 3
Storage Temperature Range TSTG -65 150 °C 3
ESD HBM 2 kV Human Body Model 3
ESD MM 200 V Machine Model 3
Package Thermal Resistance junction-to-ambient SOT-23-5 θJA 250 °C/W TSOT-23-5/SOT-23-5, Note 2 (JEDEC 51-3 test board) 3
Package Thermal Resistance junction-to-case SOT-23-5 θJC 25 °C/W TSOT-23-5/SOT-23-5 3

CAD (KiCad official)

  • Symbol: RT9193-25GB
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: rt9193-25gb-etched.step / rt9193-25gb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rt9193-25gb.step / rt9193-25gb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (14 pp, sha256 1ae3bdc5b19782fd, retrieved 2026-10-17, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF