RT9078-18GJ5
Richtek Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TSOT-23-5
RT9078-18GJ5 from Richtek Tech, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input. Operating range 1.2V to 5.5V (abs max -0.3V to 6.5V). Bypass to GND with a ceramic capacitor. |
| 2 | GND | power_in | Device ground reference. |
| 3 | EN | input | Enable control input. Logic-high (VIH >= 0.9V @ VIN=5V) turns on the regulator; logic-low (VIL <= 0.4V) disables output with ~0.1uA shutdown current. Do not leave floating. |
| 4 | NC | unconnected | No internal connection. This part (RT9078, no 'N' suffix) omits the SNS pin; on the RT9078N variant this pin is SNS (output voltage sense). |
| 5 | VOUT | power_out | Regulated output of the LDO. Fixed 1.8V (-18 suffix), up to 300mA when VIN >= 1.7V. Requires >=1uF ceramic or tantalum output capacitor for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | TSOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
RT9078-18GJ5RT9078-18GJ5QZ
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Fixed Output Voltage Range | VOUT | 0.8 | 3.45 | V | 4 | ||
| DC Output Accuracy | -2 | 2 | % | ILOAD = 1mA | 4 | ||
| Dropout Voltage (ILOAD = 300mA) | VDROP | 0.24 | 0.33 | V | ILOAD = 300mA, 1.8V ≤ VOUT < 2.1V (Note 5) | 4 | |
| Dropout Voltage (ILOAD = 200mA) | VDROP | 0.16 | 0.2 | V | ILOAD = 200mA, 1.8V ≤ VOUT < 2.1V | 4 | |
| VCC Consumption Current | IQ | 2 | 4 | μA | ILOAD = 0mA, VOUT ≤ 5.5V, VIN ≥ VOUT + VDROP | 4 | |
| Shutdown GND Current | 0.1 | 0.5 | μA | VEN = 0V (Note 6) | 5 | ||
| Shutdown Leakage Current | 0.1 | 0.5 | μA | VEN = 0V, VOUT = 0V (Note 6) | 5 | ||
| EN Input Current | IEN | 0.1 | μA | VEN = 5.5V | 5 | ||
| Line Regulation | LINE | 0.3 | 0.6 | % | ILOAD = 1mA, 1.2V ≤ VIN ≤ 1.5V | 5 | |
| Line Regulation | LINE | 0.15 | 0.3 | % | ILOAD = 1mA, 1.5V ≤ VIN ≤ 1.8V | 5 | |
| Line Regulation | LINE | 0.13 | 0.35 | % | ILOAD = 1mA, 1.8V ≤ VIN ≤ 5.5V | 5 | |
| Load Regulation | LOAD | 0.5 | 1 | % | 1mA < ILOAD < 300mA | 5 | |
| Output Current Limit | ILIM | 350 | 600 | mA | VOUT = 90%VOUT(Normal) | 5 | |
| Enable Input Voltage Logic-High | VIH | 0.9 | V | VIN = 5V | 5 | ||
| Enable Input Voltage Logic-Low | VIL | 0.4 | V | VIN = 5V | 5 | ||
| Recommended Input Voltage | VIN | 1.2 | 5.5 | V | 4 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 4 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 4 | ||
| VIN, VOUT, SNS, EN to GND | -0.3 | 6.5 | V | 4 | |||
| VOUT to VIN | -6.5 | 0.3 | V | 4 | |||
| Power Dissipation TSOT-23-5 | PD | 0.43 | W | TA = 25°C | 4 | ||
| Lead Temperature (Soldering) | 260 | °C | 10 sec | 4 | |||
| Junction Temperature | TJ | 150 | °C | 4 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 4 | ||
| ESD Susceptibility HBM | 2 | kV | HBM (Human Body Model), Note 3 | 4 | |||
| Package Thermal Resistance TSOT-23-5 junction-to-ambient | θJA | 230.6 | °C/W | JEDEC 51-7 four-layer board, TA = 25°C (Note 2) | 4 | ||
| Package Thermal Resistance TSOT-23-5 junction-to-case | θJC | 21.8 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
RT9078-18GJ5 - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
rt9078-18gj5-etched.step/rt9078-18gj5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt9078-18gj5.step/rt9078-18gj5.glbare the bare package body.
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
rt9078-18gj5.step |
85 KB | You want the bare part, or you mark your own boards. |
rt9078-18gj5-etched.step |
2.4 MB | You want the part with RT9078-18GJ5 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 567 faces against 102 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (15 pp, sha256
9337f2d38381f671, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).