component
RT9059GSP
Public Made by Adomby adom
Richtek Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOP-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -38,19 +38,19 @@ "number": "2", "name": "EN", "type": "input",- "description": "Enable control input. Logic-high (VIH >= 1.2V) enables the regulator; logic-low (VIL <= 0.4V) shuts it down and pulls VOUT low through ~150\u03a9. Absolute maximum -0.3V to 6V."+ "description": "Enable control input. Logic-high (VIH >= 1.2V) enables the regulator; logic-low (VIL <= 0.4V) shuts it down and pulls VOUT low through ~150Ω. Absolute maximum -0.3V to 6V." }, { "number": "3", "name": "VIN", "type": "power_in",- "description": "Supply input voltage; source of the regulated output current up to 3A. Operating range 1V to 5.5V. Bypass with a 10\u03bcF ceramic capacitor to GND close to the pin."+ "description": "Supply input voltage; source of the regulated output current up to 3A. Operating range 1V to 5.5V. Bypass with a 10μF ceramic capacitor to GND close to the pin." }, { "number": "4", "name": "VDD", "type": "power_in",- "description": "Supply voltage of the internal control circuit. Must satisfy VDD > VOUT + 1.5V; operating range 3V to 5.5V. Bypass with a 1\u03bcF ceramic capacitor to GND."+ "description": "Supply voltage of the internal control circuit. Must satisfy VDD > VOUT + 1.5V; operating range 3V to 5.5V. Bypass with a 1μF ceramic capacitor to GND." }, { "number": "5",@@ -62,7 +62,7 @@ "number": "6", "name": "VOUT", "type": "power_out",- "description": "Regulated output voltage, up to 3A load current. Dropout typically 350mV at 3A. Requires a 10\u03bcF ceramic output capacitor to GND."+ "description": "Regulated output voltage, up to 3A load current. Dropout typically 350mV at 3A. Requires a 10μF ceramic output capacitor to GND." }, { "number": "7",@@ -80,7 +80,7 @@ "number": "9", "name": "GND (Exposed Pad)", "type": "power_in",- "description": "Exposed thermal pad. Must be soldered to a large PCB copper area connected to GND for maximum power dissipation (\u03b8JC = 6.5\u00b0C/W, PD = 3.08W @ 25\u00b0C)."+ "description": "Exposed thermal pad. Must be soldered to a large PCB copper area connected to GND for maximum power dissipation (θJC = 6.5°C/W, PD = 3.08W @ 25°C)." } ], "provenance": {@@ -144,5 +144,8 @@ "docs/rt9059gsp-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }