component
RT9013-25GB-MS
Public Made by Adomby adom
MSKSEMI Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 7d ago |
| viewers | 7d ago |
| package.json | 7d ago |
| page.json | 7d ago |
| README.md | 7d ago |
| rt9013-25gb-ms-etched.glb | 7d ago |
| rt9013-25gb-ms-etched.step | 7d ago |
| rt9013-25gb-ms-hero.glb | 7d ago |
| rt9013-25gb-ms-hero.overlay.json | 7d ago |
| rt9013-25gb-ms.glb | 7d ago |
| rt9013-25gb-ms.kicad_mod | 7d ago |
| rt9013-25gb-ms.kicad_sym | 7d ago |
| rt9013-25gb-ms.lbr | 7d ago |
| rt9013-25gb-ms.step | 7d ago |
RT9013-25GB-MS
MSKSEMI · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
RT9013-25GB-MS from MSKSEMI, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Power input supply pin; the datasheet gives an absolute maximum VIN of 7 V and a recommended operating input up to 5.5 V. |
| 2 | GND | power_in | Ground pin for the regulator, which the datasheet also uses as the reference for the internal 1 MΩ CE-to-GND resistor. |
| 3 | CE | input | Enable pin (EN) that turns the regulator on and off; the datasheet recommends driving it to at least 1.1 V to enable, and it has an internal 1 MΩ resistor between CE and GND. |
| 4 | NC | unconnected | No internal connection; the datasheet specifies this pin to be left floating (悬空). |
| 5 | VOUT | power_out | Regulated output pin, rated for up to 500 mA output current, with the datasheet absolute maximum output-pin voltage of Vss-0.3 V to Vout+0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage (effective) VOUT(E), multiplier of nominal VOUT | VOUT(E) | 0.98 | X | IOUT=40mA, VIN=Vout+1V | 6 | ||
| Output voltage (specified) VOUT(T), multiplier of nominal VOUT | VOUT(T) | 1.02 | X | 6 | |||
| Input voltage | VIN | 5.5 | V | 6 | |||
| Maximum output current | IOUTmax | 500 | mA | VIN=Vout+1V | 6 | ||
| CE enable voltage (printed 1.1 mV; Note 3 says 1.1 V, recommended enable setting with margin) | VCE | 1.1 | mV | VIN=Vout+1V | 6 | ||
| Load regulation | ΔVOUT | 50 | mV | VIN=Vout+1V, 1mA≤IOUT≤100mA | 6 | ||
| Dropout voltage | Vdif1 | 100 | mV | IOUT=100mA | 6 | ||
| Dropout voltage | Vdif2 | 300 | mV | IOUT=200mA | 6 | ||
| Shutdown current | ICEL | 1 | uA | Vce=0V | 6 | ||
| Input voltage (absolute maximum, VIN pin) | VIN | 7 | V | 4 | |||
| Vout pin current (absolute maximum) | Iout | 600 | mA | 4 | |||
| Operating temperature range | TOpr | -40 | 85 | ℃ | 4 | ||
| Storage temperature range | Tstg | -55 | 125 | ℃ | 4 | ||
| Soldering temperature | Tsolder | 260 | ℃ | 10 s | 4 | ||
| Package power dissipation | Pd | 300 | mW | SOT-23-5L package | 4 | ||
| ESD human body model level | 4000 | V | 4 | ||||
| ESD machine model level | 400 | V | 4 | ||||
| Latch-up level | 400 | mA | 4 | ||||
| Quiescent current | ISS | 60 | uA | VIN=Vout+1V | 6 | ||
| Line regulation | ΔVOUT/(ΔVIN·VOUT) | 0.03 | %/V | IOUT=40mA, Vout+1V≤VIN≤8V | 6 | ||
| Output noise voltage | en | 50 | uVrms | IOUT=40mA, 300Hz~50kHz | 6 | ||
| Power supply rejection ratio | PSRR | 75 | dB | VIN=[Vout+1]V + 1 Vp-p AC, IOUT=40mA, f=1kHz | 6 |
CAD (KiCad official)
- Symbol:
RT9013-25GB-MS - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
rt9013-25gb-ms-etched.step/rt9013-25gb-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rt9013-25gb-ms.step/rt9013-25gb-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (9 pp, sha256
4db96a23f249c60c, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).