main
Ray Publish 0.1.1 f82ef85
{
  "slug": "rt8575gqw",
  "version": "0.1.1",
  "type": "component",
  "description": "Richtek Tech LED Drivers, DFN-16-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "led drivers",
    "rt8575gqw"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "rt8575gqw.kicad_sym",
    "rt8575gqw.kicad_mod",
    "rt8575gqw.glb",
    "rt8575gqw.step",
    "rt8575gqw.lbr",
    "docs/hero.png",
    "docs/rt8575gqw-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "rt8575gqw-hero.glb",
    "rt8575gqw-hero.overlay.json"
  ],
  "metadata": {
    "specs": {
      "Manufacturer": "Richtek Tech",
      "Package": "DFN-16-EP(5x5)",
      "Category": "LED Drivers",
      "Pins": "17"
    },
    "characteristics": {
      "version": 1,
      "source": "datasheet",
      "rows": [
        {
          "kind": "nominal",
          "name": "Colour",
          "symbol": "COLOR",
          "min": null,
          "typ": null,
          "max": null,
          "unit": "",
          "stated": false,
          "conditions": "Unknown: no source states it",
          "source": "none"
        },
        {
          "kind": "electrical",
          "name": "Dominant wavelength",
          "symbol": "LD",
          "min": null,
          "typ": null,
          "max": null,
          "unit": "nm",
          "stated": false,
          "conditions": "Unknown: no source states it",
          "source": "none"
        },
        {
          "kind": "electrical",
          "name": "Forward voltage",
          "symbol": "VF",
          "min": null,
          "typ": null,
          "max": null,
          "unit": "V",
          "stated": false,
          "conditions": "Unknown: no source states it",
          "source": "none"
        },
        {
          "kind": "electrical",
          "name": "Test current",
          "symbol": "IF",
          "min": null,
          "typ": null,
          "max": null,
          "unit": "A",
          "stated": false,
          "conditions": "Unknown: no source states it",
          "source": "none"
        },
        {
          "kind": "electrical",
          "name": "Luminous intensity",
          "symbol": "IV",
          "min": null,
          "typ": null,
          "max": null,
          "unit": "mcd",
          "stated": false,
          "conditions": "Unknown: no source states it",
          "source": "none"
        }
      ]
    }
  },
  "component": {
    "mpn": "RT8575GQW",
    "manufacturer": "Richtek Tech",
    "package": "DFN-16-EP(5x5)",
    "pin_count": 17,
    "category": "LED Drivers",
    "subcategory": "LED Drivers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589784662370516992",
    "parts": {
      "symbol": "rt8575gqw.kicad_sym",
      "footprint": "rt8575gqw.kicad_mod",
      "model_3d": "rt8575gqw-hero.glb",
      "model_3d_plain": "rt8575gqw.glb",
      "model_3d_step": "rt8575gqw.step",
      "model_3d_step_plain": "rt8575gqw.step",
      "lbr": "rt8575gqw.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "CH1",
        "type": "input",
        "description": "Current sink for LED string 1. Connect to bottom cathode of LED string. Absolute max 66V. Connect to GND if channel is unused (auto-disabled during startup)."
      },
      {
        "number": "2",
        "name": "CH2",
        "type": "input",
        "description": "Current sink for LED string 2. Connect to bottom cathode of LED string. Absolute max 66V. Connect to GND if channel is unused."
      },
      {
        "number": "3",
        "name": "CH3",
        "type": "input",
        "description": "Current sink for LED string 3. Connect to bottom cathode of LED string. Absolute max 66V. Connect to GND if channel is unused."
      },
      {
        "number": "4",
        "name": "CH4",
        "type": "input",
        "description": "Current sink for LED string 4. Connect to bottom cathode of LED string. Absolute max 66V. Connect to GND if channel is unused."
      },
      {
        "number": "5",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground. Return for internal analog reference and control circuitry."
      },
      {
        "number": "6",
        "name": "ISET",
        "type": "input",
        "description": "LED current setting. Connect resistor RISET from ISET to GND to program per-channel LED current (50-150mA). VISET is typically 1V. Do not short to GND."
      },
      {
        "number": "7",
        "name": "COMP",
        "type": "passive",
        "description": "Error amplifier compensation node for the boost loop. Connect an R-C compensation network to ground."
      },
      {
        "number": "8",
        "name": "RT",
        "type": "input",
        "description": "Switching frequency selection input. Resistor from RT to GND sets the boost switching frequency, adjustable 150kHz to 500kHz."
      },
      {
        "number": "9",
        "name": "PWM",
        "type": "input",
        "description": "PWM dimming control input. Accepts input dimming frequency 120Hz to 1kHz for LED brightness modulation without inrush current."
      },
      {
        "number": "10",
        "name": "EN",
        "type": "input",
        "description": "Chip enable, active high. High-impedance input; add a 100kΩ pull-down to GND when the control signal source can float. Absolute max 44V."
      },
      {
        "number": "11",
        "name": "VIN",
        "type": "power_in",
        "description": "Power supply input. Operating range 4.2V to 24V; absolute max 44V. Bypass with local CIN capacitors to PGND."
      },
      {
        "number": "12",
        "name": "LX",
        "type": "power_out",
        "description": "Switching node of the internal 60V, 150mΩ boost power switch. Connect to boost inductor and Schottky rectifier. Absolute max 66V. Tie in parallel with pin 13."
      },
      {
        "number": "13",
        "name": "LX",
        "type": "power_out",
        "description": "Switching node of the internal boost power switch (paralleled with pin 12). Connect to boost inductor and Schottky rectifier."
      },
      {
        "number": "14",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground of the boost converter. Tie together with pins 15 and 17 (exposed pad) to a large PCB copper area for maximum power dissipation."
      },
      {
        "number": "15",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground of the boost converter. Tie together with pins 14 and 17 (exposed pad)."
      },
      {
        "number": "16",
        "name": "OVP",
        "type": "input",
        "description": "Over-voltage protection sense input for the boost converter. Detection threshold is typically 1.2V; set via resistor divider from VOUT."
      },
      {
        "number": "17",
        "name": "PGND",
        "type": "power_in",
        "description": "Exposed thermal pad. Power ground of the boost converter. Must be soldered to a large PCB copper area and tied to PGND (pins 14/15) for thermal and electrical performance."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589784662370516992",
        "pages": null,
        "sha256": "9d811c6a0ca1bf5d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "rt8575gqw.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          4.98,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "80a15c5b3f7b2665fb508fd3b6700273d6d23357459c8e492bc58dce22129b3c",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "rt8575gqw-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          5,
          4.98,
          0.77
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "b44e8a8303b4c2bedede8357651eae5ade76d7a11faa2527365aed433d750d52",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "RT8575GQW",
  "brief": "Richtek Tech LED Drivers, DFN-16-EP(5x5). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "discovery_triggers": [
    "rt8575gqw"
  ],
  "discovery_pitch": "RT8575GQW (Richtek Tech) component page with datasheet-verified CAD.",
  "visibility": "public"
}