Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RT8293AHZSP

Richtek Tech · DC-DC Converters · SOP-8-EP

RT8293AHZSP from Richtek Tech, in a SOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BOOT power_out Bootstrap for the high side gate driver; connect a 0.1µF or greater ceramic capacitor from BOOT to SW.
2 VIN power_in Input supply voltage of 4.5V to 23V; must be bypassed with a suitably large ceramic capacitor.
3 SW power_out Phase node; connect to the external L-C filter.
4 GND power_in Ground; connect to the exposed pad and to GND, and solder the pad to a large PCB for maximum power dissipation.
5 FB input Feedback input connected to the converter output through an internal resistive divider for fixed outputs or an external resistive divider for adjustable outputs, regulating to 0.8V typ.
6 COMP passive Compensation node; connect a series RC network from COMP to GND, with an additional capacitor from COMP to GND in some cases.
7 EN input Enable input; a logic high enables the converter, while a logic low forces shutdown mode with supply current below 3µA.
8 SS passive Soft-start control input; a capacitor from SS to GND sets the soft-start period, with 0.1µF giving 13.5ms.
9 GND power_in Exposed thermal pad, connected to GND; it must be soldered to a large PCB and connected to GND for maximum power dissipation.

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package SOP-8-EP
Category Power Management ICs
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VIN 4.5 23 V 4
Junction Temperature Range -40 125 °C 4
Ambient Temperature Range -40 85 °C 4
Supply Voltage VIN -0.3 25 V 4
VBOOT − VSW -0.3 6 V 4
Other Pins Voltage -0.3 6 V 4
Power Dissipation SOP-8 (Exposed Pad) PD 1.333 W TA = 25°C 4
Lead Temperature (Soldering, 10 sec.) 260 °C 10 sec soldering 4
Junction Temperature 150 °C 4
Storage Temperature Range -65 150 °C 4
ESD Susceptibility HBM 2 kV Human Body Mode 4
ESD Susceptibility MM 200 V Machine Mode 4
Package Thermal Resistance θJA θJA 75 °C/W SOP-8 (Exposed Pad), natural convection, JEDEC 51-7 four-layer board 4
Package Thermal Resistance θJC θJC 15 °C/W Measured on exposed pad 4
Shutdown Supply Current 0.5 3 A VEN = 0V 4
Supply Current 0.8 1.2 mA VEN = 3 V, VFB = 0.9V 4
Feedback Voltage VFB 0.788 0.8 0.812 V 4.5V VIN 23V 4
Error Amplifier Transconductance GEA 940 A/V IC = ± 10A 4
High Side Switch On-Resistance RDS(ON)1 85 m 4
Low Side Switch On-Resistance RDS(ON)2 85 m 4
High Side Switch Leakage Current 0 10 A VEN = 0V, VSW = 0V 4
Upper Switch Current Limit 5.1 A Min. Duty Cycle, VBOOT VSW = 4.8V 4
Lower Switch Current Limit 1.5 A From Drain to Source 4
COMP to Current Sense Transconductance GCS 5.4 A/V 4
Oscillation Frequency fOSC1 300 340 380 kHz 4
Short Circuit Oscillation Frequency fOSC2 100 kHz VFB = 0V 4
Maximum Duty Cycle DMAX 93 % VFB = 0.7V 5
Minimum On Time tON 100 ns 5
EN Input Threshold Voltage Logic-High VIH 2.7 5.5 V 5
EN Input Threshold Voltage Logic-Low VIL 0.4 V 5
Input Under Voltage Lockout Threshold VUVLO 3.8 4.2 4.5 V VIN Rising 5
Input Under Voltage Lockout Threshold Hysteresis VUVLO 320 mV 5
Soft-Start Current ISS 6 A VSS = 0V 5
Soft-Start Period tSS 13.5 ms CSS = 0.1F 5
Thermal Shutdown TSD 150 C 5

CAD (KiCad official)

  • Symbol: RT8293AHZSP
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOP-8-EP (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (15 pp, sha256 cb05f5a210f185c5, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF