← Commit history

Set visibility: public

Ray ·69332f5b4d · ·parent fbd7e85
1 file changed +8−5
page.json+8−5
@@ -62,25 +62,25 @@         "number": "6",         "name": "COMP",         "type": "output",-        "description": "Compensation node. Output of the internal error amplifier (Gm = 680\u00b5A/V typ). Connect a series RC network from COMP to GND to compensate the regulation control loop; an additional capacitor from COMP to GND may be required."+        "description": "Compensation node. Output of the internal error amplifier (Gm = 680µA/V typ). Connect a series RC network from COMP to GND to compensate the regulation control loop; an additional capacitor from COMP to GND may be required."       },       {         "number": "7",         "name": "EN",         "type": "input",-        "description": "Enable input. Digital input that turns the regulator on or off. Drive EN higher than 1.4V to enable, lower than 0.4V to disable. If left open, an internal 1\u00b5A pull-up will pull EN high. Operating range 0V to 5.5V."+        "description": "Enable input. Digital input that turns the regulator on or off. Drive EN higher than 1.4V to enable, lower than 0.4V to disable. If left open, an internal 1µA pull-up will pull EN high. Operating range 0V to 5.5V."       },       {         "number": "8",         "name": "SS",         "type": "input",-        "description": "Soft-start control input. An internal 10\u00b5A current source charges an external capacitor from SS to GND to set the soft-start period. A 0.1\u00b5F capacitor produces approximately 10ms of soft-start."+        "description": "Soft-start control input. An internal 10µA current source charges an external capacitor from SS to GND to set the soft-start period. A 0.1µF capacitor produces approximately 10ms of soft-start."       },       {         "number": "9",         "name": "GND",         "type": "power_in",-        "description": "Exposed thermal pad (bottom). Electrically GND. Must be soldered to a large PCB copper area and connected to GND for maximum power dissipation (\u03b8JA = 75\u00b0C/W)."+        "description": "Exposed thermal pad (bottom). Electrically GND. Must be soldered to a large PCB copper area and connected to GND for maximum power dissipation (θJA = 75°C/W)."       }     ],     "provenance": {@@ -150,5 +150,8 @@     "docs/rt8272gsp-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file