main
Ray
Publish 0.1.0
944a0ce
RT8258GE
Richtek Tech · DC-DC Converters · SOT-23-6
RT8258GE from Richtek Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | passive | Gate driver bootstrap input; connect a 10nF or greater capacitor between PHASE and BOOT to supply the MOSFET driver (BOOT max VPHASE + 6V). |
| 2 | GND | power_in | Ground pin; connect to the (-) terminal of the output capacitor and keep away from D1 and the input capacitor for noise prevention. |
| 3 | FB | input | Output voltage feedback input; an external resistor divider from the output to GND sets the output voltage (0.8V typ. reference) and loop bandwidth. |
| 4 | EN | input | Chip enable, active high (logic high min 1.4V, logic low max 0.4V); pulled high by an internal circuit if left open. |
| 5 | VIN | power_in | Power supply input for 4.5V to 24V operation (26V absolute max); bypass to GND with a suitably large capacitor to prevent voltage spikes. |
| 6 | PHASE | output | Power switching output; connect to the output inductor (voltage range -0.3V to VIN + 0.3V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | SOT-23-6 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Reference Voltage | VFB | 0.784 | 0.8 | 0.816 | V | 4.5V ≤ VIN ≤ 24V | 3 |
| Feedback Current | IFB | 0.1 | 0.3 | μA | VFB = 0.8V | 3 | |
| Switch Leakage | 10 | μA | VEN = 0V, VPHASE = 0V | 3 | |||
| Current Limit | ILIM | 1.6 | 2.1 | A | VBOOT − VPHASE = 4.8V | 3 | |
| Oscillator Frequency | fSW | 600 | 700 | 800 | kHz | 3 | |
| Under Voltage Lockout Threshold Voltage Rising | 3.9 | 4.2 | 4.5 | V | 3 | ||
| EN Input Voltage Logic High | 1.4 | V | 3 | ||||
| EN Input Voltage Logic Low | 0.4 | V | 3 | ||||
| Quiescent Current | IQ | 0.55 | 1 | mA | VEN = 2V, VFB = 1V (No Switching) | 3 | |
| Switch On Resistance | RDS(ON) | 0.3 | Ω | 3 | |||
| Maximum Duty Cycle | 90 | % | 3 | ||||
| Minimum On-Time | tON | 100 | ns | 3 | |||
| UVLO Threshold Hysteresis | 270 | mV | 3 | ||||
| EN Pull Up Current | 1 | μA | VEN = 0V | 3 | |||
| Shutdown Current | ISHDN | 25 | μA | VEN = 0V | 3 | ||
| Thermal Shutdown | TSD | 150 | °C | 3 | |||
| Supply Voltage | VIN | 26 | V | 3 | |||
| PHASE Voltage | -0.3 | V | to (VIN + 0.3V) | 3 | |||
| BOOT Voltage | 6 | V | VPHASE + 6V | 3 | |||
| All Other Pins | 6 | V | 0.3V to 6V | 3 | |||
| Power Dissipation | PD | 0.4 | W | TA = 25°C, T/SOT-23-6 | 3 | ||
| Junction Temperature | TJ | 150 | °C | 3 | |||
| Lead Temperature | 260 | °C | Soldering, 10 sec. | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| ESD HBM | 2 | kV | Human Body Mode | 3 | |||
| ESD MM | 200 | V | Machine Mode | 3 | |||
| Supply Voltage | VIN | 4.5 | 24 | V | 3 | ||
| Output Voltage | VOUT | 0.8 | 15 | V | 3 | ||
| EN Voltage | VEN | 0 | 5.5 | V | 3 | ||
| Junction Temperature Range | TJ | -40 | 125 | °C | 3 | ||
| Ambient Temperature Range | TA | -40 | 85 | °C | 3 | ||
| Package Thermal Resistance | θJA | 250 | °C/W | T/SOT-23-6, JEDEC 51-3 single layer board, TA = 25°C | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
RT8258GE - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.896 mm, terminals on the pads, 1.092 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Richtek Tech datasheet (12 pp, sha256
f6b801fe9a7f15b2, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# RT8258GE
**Richtek Tech** · DC-DC Converters · SOT-23-6
RT8258GE from Richtek Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOT | passive | Gate driver bootstrap input; connect a 10nF or greater capacitor between PHASE and BOOT to supply the MOSFET driver (BOOT max VPHASE + 6V). |
| 2 | GND | power_in | Ground pin; connect to the (-) terminal of the output capacitor and keep away from D1 and the input capacitor for noise prevention. |
| 3 | FB | input | Output voltage feedback input; an external resistor divider from the output to GND sets the output voltage (0.8V typ. reference) and loop bandwidth. |
| 4 | EN | input | Chip enable, active high (logic high min 1.4V, logic low max 0.4V); pulled high by an internal circuit if left open. |
| 5 | VIN | power_in | Power supply input for 4.5V to 24V operation (26V absolute max); bypass to GND with a suitably large capacitor to prevent voltage spikes. |
| 6 | PHASE | output | Power switching output; connect to the output inductor (voltage range -0.3V to VIN + 0.3V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Richtek Tech |
| Package | SOT-23-6 |
| Category | Power Management ICs |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Reference Voltage | VFB | 0.784 | 0.8 | 0.816 | V | 4.5V ≤ VIN ≤ 24V | 3 |
| Feedback Current | IFB | | 0.1 | 0.3 | μA | VFB = 0.8V | 3 |
| Switch Leakage | | | | 10 | μA | VEN = 0V, VPHASE = 0V | 3 |
| Current Limit | ILIM | 1.6 | 2.1 | | A | VBOOT − VPHASE = 4.8V | 3 |
| Oscillator Frequency | fSW | 600 | 700 | 800 | kHz | | 3 |
| Under Voltage Lockout Threshold Voltage Rising | | 3.9 | 4.2 | 4.5 | V | | 3 |
| EN Input Voltage Logic High | | 1.4 | | | V | | 3 |
| EN Input Voltage Logic Low | | | | 0.4 | V | | 3 |
| Quiescent Current | IQ | | 0.55 | 1 | mA | VEN = 2V, VFB = 1V (No Switching) | 3 |
| Switch On Resistance | RDS(ON) | | 0.3 | | Ω | | 3 |
| Maximum Duty Cycle | | | 90 | | % | | 3 |
| Minimum On-Time | tON | | 100 | | ns | | 3 |
| UVLO Threshold Hysteresis | | | 270 | | mV | | 3 |
| EN Pull Up Current | | | 1 | | μA | VEN = 0V | 3 |
| Shutdown Current | ISHDN | | 25 | | μA | VEN = 0V | 3 |
| Thermal Shutdown | TSD | | 150 | | °C | | 3 |
| Supply Voltage | VIN | | | 26 | V | | 3 |
| PHASE Voltage | | -0.3 | | | V | to (VIN + 0.3V) | 3 |
| BOOT Voltage | | | | 6 | V | VPHASE + 6V | 3 |
| All Other Pins | | | | 6 | V | 0.3V to 6V | 3 |
| Power Dissipation | PD | | | 0.4 | W | TA = 25°C, T/SOT-23-6 | 3 |
| Junction Temperature | TJ | | | 150 | °C | | 3 |
| Lead Temperature | | | | 260 | °C | Soldering, 10 sec. | 3 |
| Storage Temperature Range | | -65 | | 150 | °C | | 3 |
| ESD HBM | | | | 2 | kV | Human Body Mode | 3 |
| ESD MM | | | | 200 | V | Machine Mode | 3 |
| Supply Voltage | VIN | 4.5 | | 24 | V | | 3 |
| Output Voltage | VOUT | 0.8 | | 15 | V | | 3 |
| EN Voltage | VEN | 0 | | 5.5 | V | | 3 |
| Junction Temperature Range | TJ | -40 | | 125 | °C | | 3 |
| Ambient Temperature Range | TA | -40 | | 85 | °C | | 3 |
| Package Thermal Resistance | θJA | | | 250 | °C/W | T/SOT-23-6, JEDEC 51-3 single layer board, TA = 25°C | 3 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `RT8258GE`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.896 mm, terminals on the pads, 1.092 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Richtek Tech datasheet](docs/rt8258ge-datasheet.pdf) (12 pp, sha256 `f6b801fe9a7f15b2`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/rt8258ge-datasheet.pdf)