Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RT8167AGQW

Richtek Tech · AC-DC Controllers & Regulators · QFN-48-EP(6x6)

RT8167AGQW from Richtek Tech, in a QFN-48-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ISEN1P input Positive current sense input of CORE VR.
2 ISEN1N input Negative current sense input of CORE VR.
3 COMP output CORE VR compensation pin, the output node of the error amplifier.
4 FB input CORE VR feedback, the negative input node of the error amplifier.
5 RGND input Return ground for CORE VR, the negative input for differential remote voltage sensing.
6 IMON output CORE VR current monitor output whose voltage VIMON is proportional to the output current, with detailed VIMON generated by the built-in ADC for digital current reporting.
7 IMONFB input Sets CORE VR current monitor gain externally via a resistor RIMONFB to CORE VCC_SENSE, with the gain set by the ratio to the IMON-to-ground resistor RIMON.
8 DRPEN input CORE VR droop enable setting using an internal 80μA source for 10μs; connect to VCC to enable droop or to GND to disable it.
9 OFS input CORE VR output voltage no-load offset setting via a resistive divider from VCC to GND, or connect to GND for no offset.
10 OFSA input GFX VR output voltage no-load offset setting via a resistive divider from VCC to GND, or connect to GND for no offset.
11 GFXPS2 input GFX VR forced DEM enable; connect to VCC for forced DEM or to GND to follow the SVID power state command.
12 VCC power_in 5V power supply input of the controller, bypassed to GND with 1μF or greater ceramic capacitor.
13 SETINIA input GFX VR initial startup voltage VINI_GFX setting via a resistive divider from VCC to GND, or connect to GND for 0V.
14 SETINI input CORE VR initial startup voltage VINI_CORE setting via a resistive divider from VCC to GND, or connect to GND for 0V.
15 TMPMAX input CORE VR maximum temperature setting via a resistive divider from VCC to GND.
16 ICCMAX input CORE VR maximum current setting via a resistive divider from VCC to GND.
17 ICCMAXA input GFX VR maximum current setting via a resistive divider from VCC to GND.
18 TSEN input Thermal monitor sense pin of CORE VR.
19 OCSET input CORE VR over current protection threshold setting, with pin voltage VOCSET from 0 to 3.3V set by a divider from VCC to GND.
20 TSENA input Thermal monitor sense pin of GFX VR.
21 OCSETA input GFX VR over current protection threshold setting, with pin voltage VOCSETA from 0 to 3.3V set by a divider from VCC to GND.
22 IBIAS passive Internal bias current setting; connect a 53.6kΩ resistor from IBIAS to GND.
23 VRHOT output Active-low thermal monitor output; connect a pull-up resistor to 1.05V.
24 VR_READY output CORE VR voltage ready indicator; connect a pull-up resistor to 1.05V.
25 VRA_READY output GFX VR voltage ready indicator; connect a pull-up resistor to 1.05V.
26 DRPENA input GFX VR droop enable setting using an internal 80μA source for 10μs; connect to VCC to enable droop or to GND to disable it.
27 ALERT output Active-low SVID alert pin; connect a 75Ω resistor from ALERT to 1.05V.
28 VDIO bidirectional Controller and CPU data transmission interface; connect a 64.9Ω resistor between VDIO and 1.05V.
29 VCLK input Synchronous clock from the CPU; connect a 64.9Ω resistor from VCLK to 1.05V.
30 IMONFBA input Sets GFX VR current monitor gain externally via a resistor RIMONFBA to GFX VCC_SENSE, with the gain set by the ratio to the grounded resistor RIMONA.
31 IMONA output GFX VR current monitor output whose voltage VIMONA is proportional to the output current, with detailed VIMONA generated by the built-in ADC for digital current reporting.
32 RGNDA input Return ground for GFX VR, the negative input for differential remote voltage sensing.
33 FBA input GFX VR feedback, the negative input node of the error amplifier.
34 COMPA output GFX VR compensation pin, the output node of the error amplifier.
35 ISENAN input Negative current sense input of GFX VR.
36 ISENAP input Positive current sense input of GFX VR.
37 TONSETA input On-time setting of GFX VR; connect this pin to VIN with one resistor.
38 EN input Chip enable, active high.
39 BOOTA passive Bootstrap flying capacitor connection for GFX VR high side driver; connect to PHASEA with an external ceramic capacitor.
40 UGATEA output High side MOSFET floating gate driver output for GFX VR; connect to the high side MOSFET gate.
41 PHASEA passive Switching node connection for GFX VR and its zero cross detect input; connect to high side MOSFET source, low side MOSFET drain and inductor.
42 LGATEA output Synchronous-rectifier gate driver output of GFX VR; connect to the low side MOSFET gate.
43 PVCC power_in 5V power supply of driver, bypassed to GND with 1μF or greater ceramic capacitor.
44 LGATE output Synchronous-rectifier gate driver output of CORE VR; connect to the low side MOSFET gate.
45 PHASE passive Switching node connection for CORE VR, internal lower supply rail for UGATE and zero cross detect input; connect to high side MOSFET source, low side MOSFET drain and inductor.
46 UGATE output High side MOSFET floating gate driver output for CORE VR; connect to the high side MOSFET gate.
47 BOOT passive Bootstrap flying capacitor connection for CORE VR high side driver; connect to PHASE with an external ceramic capacitor.
48 TONSET input On-time setting of CORE VR; connect this pin to VIN with one resistor.
49 GND power_in Ground exposed pad; must be soldered to a large PCB and connected to GND for maximum power dissipation.

Key specifications

Parameter Value
Manufacturer Richtek Tech
Package QFN-48-EP(6x6)
Category Power Supply Chip
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage of Controller VCC 4.5 5.5 V 16
Supply Voltage of Gate Driver VPVCC 4.5 5.5 V 16
Battery Input Voltage VIN 5 25 V 16
Junction Temperature Range TJ -40 125 °C 16
Ambient Temperature Range TA -40 85 °C 16
VCC to GND -0.3 6.5 V 16
PVCC to GND -0.3 6.5 V 16
RGNDx to GND -0.3 0.3 V 16
TONSETx to GND -0.3 28 V 16
BOOTx to PHASEx -0.3 6.5 V 16
PHASEx to GND DC -0.3 28 V DC 16
PHASEx to GND transient -8 32 V <20ns 16
UGATEx to PHASEx transient -5 7.5 V <20ns 16
LGATEx to GND transient -2.5 7.5 V <20ns 16
Power Dissipation PD 2.857 W TA = 25°C, WQFN-48L 6x6 16
Junction Temperature TJ 150 °C 16
Lead Temperature 260 °C Soldering, 10 sec. 16
Storage Temperature Range -65 150 °C 16
ESD HBM 2 kV Human Body Mode 16
ESD MM 200 V Machine Mode 16
Thermal Resistance Junction-to-Ambient θJA 35 °C/W WQFN-48L 6x6 16
Thermal Resistance Junction-to-Case θJC 6 °C/W WQFN-48L 6x6, at exposed pad 16
Input Voltage Range VCC/VPVCC VCC/VPVCC 4.5 5 5.5 V VEN = 1.05V, Not Switching 16
Battery Input Voltage VIN 5 25 V 16
Supply Current (VCC + PVCC) IVCC + IPVCC 12 20 mA VEN = 1.05V, Not Switching 16
Supply Current (TONSETx) ITONSETx 110 μA VFB =1V, VIN = 12V, RTON = 100kΩ 16
Shutdown Current (PVCC + VCC) IVCC_SHDN + IPVCC_SHDN 5 μA VEN = 0V 17
Shutdown Current (TONSETx) ITONSETx_SHDN 5 μA VEN = 0V 17
TONSETx Voltage VTONSETx 0.95 1.075 1.2 V IRTON = 80μA, VFBx = 1V 17
On-Time tON 315 350 385 ns IRTON = 80μA, VFBx = 1V 17
TONSETx Input Current Range IRTON 25 280 μA VFBx = 1.1V 17
Minimum Off-Time TOFF_MIN 350 ns 17
DRPENx Internal Current Source IDRPENx 80 μA EN goes high within 10μs 17
Droop Enable Threshold VDRPENx 4.5 V Detect VDRPENx, EN goes high within 10μs 17
Droop Disable Threshold VDRPENx 2 V Detect VDRPENx, EN goes high within 10μs 17
GFXPS2x Enable Threshold VGFXPS 4.3 V 17
GFXPS2x Disable Threshold VGFXPS 0.7 V 17
DAC Accuracy VFBx -0.5 0 0.5 %VID VIDSVID Setting = 1.000V~1.520V, OFSSVID Setting = 0V 17
DAC Accuracy VFBx -5 0 5 %VID VIDSVID Setting = 0.800V~1.000V, OFSSVID Setting = 0V 17
DAC Accuracy VFBx -8 0 8 %VID VIDSVID Setting = 0.500V~0.800V, OFSSVID Setting = 0V 17
DAC Accuracy VFBx -10 0 10 mV VIDSVID Setting = 1.100V, OFSSVID Setting = −0.640V~0.635V 17
SETINIx Voltage VSETINIx 0 0.3125 0.5125 V VINI_CORE = 0V, VINI_GFX = 0V 17
SETINIx Voltage VSETINIx 0.7375 0.9375 1.1375 V VINI_CORE = 0.9V, VINI_GFX = 0.9V 17
SETINIx Voltage VSETINIx 1.3625 1.5625 1.7625 V VINI_CORE = 1V, VINI_GFX = 1V 17
SETINIx Voltage VSETINIx 2.6125 5 V VINI_CORE = 1.1V, VINI_GFX = 1.1V 17
External OFSx Voltage VOFSx 68 72 %VCC Offset = 100mV 17
External OFSx Voltage VOFSx 52 56 60 %VCC Offset = 50mV 17
External OFSx Voltage VOFSx 36 40 44 %VCC Offset = −50mV 17
External OFSx Voltage VOFSx 20 24 28 %VCC Offset = −100mV 17
External OFSx Voltage VOFSx 0 8 12 %VCC No Offset Voltage 17
Impedance of OFSx Pin ROFSx 1 MΩ 17
Under Voltage Lock-out Threshold VUVLO 4.04 4.24 V VCC Falling edge 19
Over Voltage Protection Threshold VOVP 100 150 200 mV Respect to VOUT_MAXSVID, with 1μs filter time 19
Under Voltage Protection Threshold VUVP -350 -300 -250 mV VUVP = VISENxN − VREFx, 0.8V < VREFx <1.52V, with 3μs filter time 19
Negative Voltage Protection Threshold VNVP -100 -50 mV VNVP = VISENxN − GND 19
EN Input Logic-High Threshold VIH 0.7 V With respect to 1V, 70% 19
EN Input Logic-Low Threshold VIL 0.3 V With respect to 1V, 30% 19
Leakage Current of EN -1 1 μA 19
VCLK,VDIO Input Threshold High VIH 0.65 V With respect to Intel Spec. 19
VCLK,VDIO Input Threshold Low VIL 0.45 V With respect to Intel Spec. 19
Leakage Current of VCLK, VDIO ILEAK_IN -1 1 μA 19
ALERT Low Voltage VALERT 0.4 V IALERT_SINK = 4mA 19
VRx_READY Low Voltage VVRx_READY 0.4 V IVRx_READY_SINK = 4mA 19
VRx_READY Delay tVRx_READY 70 100 160 μs VISENxN = VBOOT to VVRx_READY high 19
High Impedance Output Leakage ALERT, VRx_READY, VRHOT ILEAK_OUT -1 1 μA 19

CAD (KiCad official)

  • Symbol: RT8167AGQW
  • Footprint: Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm
  • 3D model: QFN-48-EP(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Richtek Tech datasheet (41 pp, sha256 16ac0eb215908bda, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF